ISO 2602:1980
Current
Current
The latest, up-to-date edition.
Statistical interpretation of test results Estimation of the mean Confidence interval
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-02-1980
Concerns the estimation of the mean of a normal population on the basis of a series of tests applied to a random sample of individuals drawn from this population when the variance of the population is unknown and calculation of the conficence interval for the population mean therefrom and from the standard deviation. Test method may be subject to systematic errors.
| DevelopmentNote |
Also numbered as BS 2846-2(1981) (06/2005)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NFX 06 042 : 1971 | Similar to |
| NBN X 03 001 : 1985 | Identical |
| PN ISO 2602 : 1994 | Identical |
| UNE 66040:2003 | Identical |
| ISO 10054:1998 | Internal combustion compression-ignition engines Measurement apparatus for smoke from engines operating under steady-state conditions Filter-type smokemeter |
| ISO 178:2010 | Plastics Determination of flexural properties |
| 10/30216358 DC : 0 | BS ISO 29042-8 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: ROOM METHOD FOR MEASUREMENT OF THE POLLUTANT CONCENTRATION PARAMETER |
| 17/30353428 DC : DRAFT JUNE 2017 | BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| I.S. EN 15383:2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| 10/30233182 DC : 0 | BS EN 492 - FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| 06/30155782 DC : 0 | BS EN 1170-8 - TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| 10/30233189 DC : 0 | BS EN 494 - FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| 10/30231817 DC : 0 | BS EN 12705 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| BS ISO 11614:1999 | Reciprocating internal combustion compression-ignition engines. Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques |
| ISO 29042-7:2010 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 7: Test bench method for the measurement of the pollutant concentration parameter |
| DIN EN 15383:2014-02 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| DIN EN 1006:2009-10 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
| 08/30188330 DC : DRAFT AUG 2008 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| DD ENV 1006:2003 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
| 18/30333968 DC : 0 | BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT |
| BIS IS 13360-5-4 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 4: DETERMINATION OF IZOD IMPACT STRENGTH |
| BS ISO 16269-6:2014 | Statistical interpretation of data Determination of statistical tolerance intervals |
| 08/30185918 DC : 0 | BS EN 1006 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| UNE-ISO 2230:2012 | Rubber products. Guidelines for storage |
| I.S. EN ISO 15012-2:2008 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| I.S. EN 16480:2016 | PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| UNI ISO 4037-2 : 2009 | X AND GAMMA REFERENCE RADIATION FOR CALIBRATING DOSEMETERS AND DOSERATE METERS AND FOR DETERMINING THEIR RESPONSE AS A FUNCTION OF PHOTON ENERGY - PART 2: DOSIMETRY FOR RADIATION PROTECTION OVER THE ENERGY RANGES 8 KEV TO 1,3 MEV AND 4 MEV TO 9 MEV |
| I.S. EN ISO 19085-3:2017 | WOODWORKING MACHINES - SAFETY REQUIREMENTS - PART 3: NUMERICALLY CONTROLLED (NC) BORING AND ROUTING MACHINES (ISO 19085-3:2017) |
| BS ISO 4603 : 1993 | TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| I.S. EN 12467:2012 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| ISO 5667-12:2017 | Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas |
| UNE-EN 16480:2016 | Pumps - Minimum required efficiency of rotodynamic water pumps |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
| UNI EN 15383 : 2013-11 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| EN ISO 178:2010/A1:2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
| PREN 16770 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| ASTM D 5941 : 1996 | Standard Test Method for Determination of Izod Impact Strength (Withdrawn 1998) |
| I.S. EN ISO 180:2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000) |
| ISO 5082:1982 | Textiles Woven fabrics Determination of breaking strength Grab method |
| I.S. EN ISO 527-1:2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
| DIN EN ISO 4674-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016) |
| 13/30280057 DC : 0 | BS EN 13782 - TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN 1093-8 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| UNE-EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| BS EN ISO 604:2003 | Plastics. Determination of compressive properties |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNE-EN 60335-2-69:2013 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| BS EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics. Determination of tear resistance Constant rate of tear methods |
| DIN EN 1170-8 :2009-05 | TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| DIN EN 13923:2006-02 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 12705:2011 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| EN 16480:2016 | Pumps - Minimum required efficiency of rotodynamic water pumps |
| EN 1170-8:2008 | Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test |
| EN 1093-8:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8: Pollutant concentration parameter, test bench method |
| EN 1093-9:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
| EN 12779:2015 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN ISO 178:2013-09 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
| EN 1006:2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
| EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery |
| EN 1013-3:1997 | Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC) |
| NF EN ISO 6603-2 : 2002 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST |
| ONORM EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| I.S. EN ISO 6603-2:2000 | PLASTICS - DETERMINATION OF PUNCTURE IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST |
| NF EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| DIN EN 16480 E : 2017 | PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| I.S. EN 1482-1:2007 | FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| BS ISO 15592-1:2001 | Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Sampling |
| I.S. EN 843-5:2006 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS |
| BS EN ISO 15012-4:2016 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume General requirements |
| UNE 116005:2012 | Manufacturing by additive of caps on plastics. Additive manufacturing. Preparation of test pieces |
| DIN EN ISO 178 E : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD.1:2013) |
| BS ISO 5667-12:2017 | Water quality. Sampling Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas |
| 17/30342172 DC : 0 | BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
| 07/30175034 DC : DRAFT DEC 2007 | BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
| 11/30196210 DC : 0 | BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
| ISO 12500-2:2007 | Filters for compressed air — Test methods — Part 2: Oil vapours |
| 10/30237537 DC : 0 | EN 15383 - PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| DD ENV 1170-8:1997 | Precast concrete products. Test method for glass-fibre reinforced cement Cyclic weathering type test |
| 12/30242633 DC : 0 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
| BS ISO 8243:2013 | Cigarettes. Sampling |
| PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
| 13/30254060 DC : 0 | BS EN ISO 15012-4 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: DESIGN REQUIREMENTS |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| BS ISO 7183:2007 | Compressed-air dryers. Specifications and testing |
| 08/30192288 DC : 0 | BS EN ISO 179-1 - PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| 08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
| BS EN ISO 15012-2:2008 | Health and safety in welding and allied processes. Requirements, testing and marking of equipment for air filtration Determination of the minimum air volume flow rate of captor hoods and nozzles |
| BS ISO 10054:1998 | Internal combustion compression-ignition engines. Measurement apparatus for smoke from engines operating under steady-state conditions. Filter type smokemeter |
| 14/30298580 DC : 0 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| 04/30124932 DC : DRAFT NOV 2004 | ISO 11554 - OPTICS AND OPTICAL INSTRUMENTS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
| 00/709413 DC : 0 | BS EN ISO 15012-2 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: TESTING OF THE CAPTURE ZONE OF WELDING FUME EXTRACTION DEVICES |
| CEI EN 60335-2-69 : 2014 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| PREN 492 : DRAFT 2010 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 1006:2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| I.S. EN ISO 178:2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010) |
| ISO 7772-1:1998 | Assessment of industrial laundry machinery by its effect on textiles Part 1: Washing machines |
| 17/30367211 DC : 0 | BS EN 16480 - PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
| CGSB 176.2-1 : 1996 | METHODS OF SAMPLING AND TESTING TOBACCO - DETERMINATION OF BENZO[A]PYRENE IN TOTAL PARTICULATE MATTER OF TOBACCO SMOKE |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| NF EN 1170-8 : 2008 | TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| BS EN 60335-2-69:2012 | Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| ISO 2230:2002 | Rubber products — Guidelines for storage |
| I.S. EN ISO 11554:2017 | OPTICS AND PHOTONICS - LASERS AND LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS (ISO 11554:2017) |
| BS EN 492 : 2012 | FIBRE-CEMENT SLATES AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| NF ISO 15310 : 2001 | COMPOSITES PLASTIQUES RENFORCES DE FIBRES - DETERMINATION DU MODULE DE CISAILLEMENT DANS LE PLAN PAR LA METHODE DE TORSION DE PLAQUE |
| EN 12467:2012+A2:2018 | Fibre-cement flat sheets - Product specification and test methods |
| PREN 16480 : DRAFT 2017 | PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
| ISO 16269-8:2004 | Statistical interpretation of data — Part 8: Determination of prediction intervals |
| ISO 7183:2007 | Compressed-air dryers Specifications and testing |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| DIN EN 1392:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions |
| DIN EN 12705:2011-08 | Adhesives for leather and footwear materials - Determination of colour change of white or bright coloured leather surfaces by migration |
| DIN EN ISO 6603-2 E : 2002 | DETERMINATION OF MULTIAXIAL IMPACT BEHAVIOUR OF RIGID PLASTICS - PART 2: INSTRUMENTED PUNCTURE TEST |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| BS EN ISO 180 : 2001 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| BS EN 843-5:2006 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Statistical analysis |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| BS EN ISO 6603-2:2000 | Plastics. Determination of multi-axial impact behaviour of rigid plastics Instrumented puncture testing |
| BS EN 1244:1998 | Adhesives. Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| BS EN ISO 14125 : 1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| BS EN ISO 14129:1998 | Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
| ISO 15310:1999 | Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
| I.S. EN ISO 10456:2007 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| DIN EN ISO 6259-1:2002-02 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| I.S. EN ISO 5079:1996 | TEXTILES - FIBRES - DETERMINATION OF BREAKING FORCE AND ELONGATION AT BREAK OF INDIVIDUAL FIBRES |
| I.S. EN ISO 15012-1:2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| DIN EN 16480:2017-07 | Pumps - Minimum required efficiency of rotodynamic water pumps |
| I.S. EN ISO 179-1:2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| I.S. EN 13782:2015 | TEMPORARY STRUCTURES - TENTS - SAFETY |
| I.S. EN 1392:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS |
| I.S. EN ISO 4674-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016) |
| I.S. EN ISO 8256:2004 | PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| I.S. EN 1093-8:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| I.S. EN ISO 5667-1:2006 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| I.S. EN 12779:2015 | SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATION - SAFETY RELATED PERFORMANCES AND SAFETY REQUIREMENTS |
| I.S. EN ISO 6259-1:2015 | THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015) |
| I.S. EN ISO 604:2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| I.S. EN 12705:2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| I.S. EN 494:2012 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| I.S. EN 1093-9:1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| UNI EN ISO 15012-1 : 2013 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| BS 2782-5:Method 552A:1999 | Methods of testing plastics. Optical and colour properties, weathering Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS EN 12467 : 2012 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN ISO 178 : 2010 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| DIN ISO 15592-1:2005-05 | Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 1: Sampling (ISO 15592-1:2001) |
| ISO 11614:1999 | Reciprocating internal combustion compression-ignition engines Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas |
| 04/30125776 DC : DRAFT NOV 2004 | EN 843-5 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 5: STATISTICAL ANALYSIS |
| 04/30123559 DC : DRAFT OCT 2004 | EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS |
| BS ISO 8573-5:2001 | Compressed air Test methods for oil vapour and organic solvent content |
| XP X30 473 : 2008 XP | HOUSEHOLD AND RELATED WASTE - INSPECTION OF SORTING EQUIPMENT PERFORMANCE |
| ISO 4603:1993 | Textile glass — Woven fabrics — Determination of thickness |
| BS ISO 8096:2005 | Rubber- or plastics-coated fabrics for water resistant clothing. Specification |
| PREN 12467 : DRAFT 2010 | FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| 01/120080 DC : DRAFT JAN 2001 | BS EN 13923 - FILAMENT WOUND FRP PRESSURE VESSELS - MATERIALS, DESIGN, CALCULATION, MANUFACTURING AND TESTING |
| UNE-ISO 16269-6:2015 | Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
| BS ISO 25780:2011 | Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin. Pipes with flexible joints intended to be installed using jacking techniques |
| BS EN 1170-8:2008 | Test method for glass-fibre reinforced cement Cyclic weathering type test |
| BS EN 1006:2009 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
| 09/30179548 DC : DRAFT AUG 2009 | BS ISO 10904 - FIBRE-CEMENT CORRUGATED SHEETS AND FITTINGS FOR ROOFING AND CLADDING |
| BS ISO 15310 : 1999 AMD 15944 | REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD |
| 16/30269189 DC : DRAFT JAN 2016 | BS ISO 5667-12 - WATER QUALITY - SAMPLING - PART 12: GUIDANCE ON SAMPLING OF BOTTOM SEDIMENTS |
| BS 6068-6.1(1981) : AMD 7435 | WATER QUALITY - SAMPLING - GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES |
| 98/100165 DC : DRAFT FEB 1998 | BS EN 326-2 - WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: QUALITY CONTROL IN THE FACTORY |
| 02/120706 DC : DRAFT FEB 2002 | BS EN ISO 8256 - PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| 00/709412 DC : DRAFT MAY 2000 | BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 1: TESTING OF THE SEPARATION EFFICIENCY FOR WELDING FUME |
| PREN 12779 : DRAFT 2014 | SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| IEC 60335-2-69:2016 RLV | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
| ISO 8336:2017 | Fibre-cement flat sheets — Product specification and test methods |
| ASTM D 5938 : 1996 | Standard Test Method for Determination of Tensile Properties (Withdrawn 1998) |
| EN ISO 19085-3:2017 | Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017) |
| ISO 12815:2013 | Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
| UNI EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN 1170-8 : 2009 | TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| UNE-ISO 15592-1:2012 | Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 1: Sampling |
| ISO 8096:2005 | Rubber- or plastics-coated fabrics for water-resistant clothing — Specification |
| ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
| ISO 5667-10:1992 | Water quality Sampling Part 10: Guidance on sampling of waste waters |
| NF EN ISO 180 : 2001 AMD 2 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| ISO 5081:1977 | Textiles Woven fabrics Determination of breaking strength and elongation (Strip method) |
| ISO 16269-7:2001 | Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals |
| ONORM EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| IEC 60335-2-69:2016 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| EN ISO 14125:1998/A1:2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| DIN EN 12779:2016-03 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| DIN EN 1093-8:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER - TEST BENCH METHOD |
| DIN EN ISO 8256:2005-05 | Plastics - Determination of tensile-impact strength (ISO 8256:2004); German version EN ISO 8256:2004 |
| DIN EN 494:2015-12 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN ISO 15012-1:2013-08 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY (ISO 15012-1:2013) |
| DIN EN 13782:2015-06 | TEMPORARY STRUCTURE - TENTS - SAFETY |
| BS EN 1392:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions |
| UNE-EN ISO 10456:2012 | Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) |
| BS EN ISO 8256:2004 | Plastics. Determination of tensile-impact strength |
| DIN EN ISO 180:2013-08 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD.1:2006 + AMD.2:2013) |
| ISO 14125:1998 | Fibre-reinforced plastic composites Determination of flexural properties |
| BS EN 494 : 2012 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI EN ISO 180 : 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH |
| EN ISO 5079:1995 | TEXTILES - FIBRES - DETERMINATION OF BREAKING FORCE AND ELONGATION AT BREAK OF INDIVIDUAL FIBRES |
| EN ISO 15012-4:2016 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 4: General requirements (ISO 15012-4:2016) |
| UNI EN ISO 14125 : 2011 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN 12705 : 2011 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| UNI EN 1093-9 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| BS 4200-3:1979 | Guide on the reliability of electronic equipment and parts used therein Presentation of reliability data on electronic components (or parts) |
| BS 2846-8:2001 | Guide to statistical interpretation of data Median. Estimation and confidence intervals |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| I.S. EN ISO 14125:1998 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
| I.S. EN ISO 14126:2000 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| BS 2782-3.335A(1993) : AMD 8638 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN ISO 604 : 2008 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| UNI EN ISO 10456 : 2008 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
| UNI EN 1093-8 : 2008 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 8: POLLUTANT CONCENTRATION PARAMETER, TEST BENCH METHOD |
| UNI EN ISO 527-1 : 2012 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES |
| UNI EN ISO 179-1 : 2010 | PLASTICS - DETERMINATION OF CHARPY IMPACT PROPERTIES - PART 1: NON-INSTRUMENTED IMPACT TEST |
| UNI ISO 2230 : 2009 | RUBBER PRODUCTS - GUIDELINES FOR STORAGE |
| DIN 53812 : DRAFT 93 | TEXTILES; FIBRES; DETERMINATION OF LINEAR DENSITY; GRAVIMETRIC METHOD AND VIBROSCOPE METHOD |
| IEC 60335-2-69 REDLINE : 5.0 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| NF ISO 12500-1 : 2007 | FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 1: OIL AEROSOLS |
| BS ISO 16269-8:2004 | Statistical interpretation of data Determination of prediction intervals |
| BS EN 16480:2016 | Pumps. Minimum required efficiency of rotodynamic water pumps |
| 16/30315531 DC : 0 | BS ISO 4582 - PLASTICS - DETERMINATION OF CHANGES IN COLOUR AND VARIATIONS IN PROPERTIES AFTER EXPOSURE TO DAYLIGHT UNDER GLASS, NATURAL WEATHERING OR LABORATORY LIGHT SOURCES |
| 10/30233185 DC : 0 | BS EN 12467 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNI EN 1006 : 2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| DIN EN 15383 E : 2014 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| 09/30190926 DC : 0 | BS ISO 29042-7 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: TEST BENCH METHOD FOR THE MEASUREMENT OF THE POLLUTANT CONCENTRATION PARAMETER |
| 05/30136177 DC : DRAFT JULY 2005 | EN 1482-1 - FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING |
| UNE-EN 492:2013 | Fibre-cement slates and fittings - Product specification and test methods |
| BS ISO 9163 : 1996 AMD 10351 | TEXTILE GLASS - ROVINGS - MANUFACTURE OF TEST SPECIMENS AND DETERMINATION OF TENSILE STRENGTH OF IMPREGNATED ROVINGS |
| DD ENV 843-5:1997 | Advanced technical ceramics. Monolithic ceramics. Mechanical tests at room temperature. Statistical analysis |
| BS ISO 12815:2013 | Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
| 14/30292850 DC : 0 | BS EN 12779 - SAFETY OF WOODWORKING MACHINES - CHIPS AND DUST EXTRACTION SYSTEMS WITH FIXED INSTALLATIONS - SAFETY REQUIREMENTS |
| BS ISO 10904:2011 | Fibre-cement corrugated sheets and fittings for roofing and cladding |
| 16/30327521 DC : 0 | BS EN ISO 11554 - LASER-RELATED EQUIPMENT - TEST METHODS FOR LASER BEAM POWER, ENERGY AND TEMPORAL CHARACTERISTICS |
| 10/30216256 DC : 0 | BS EN 60335-2-69 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| 11/30242017 DC : 0 | BS EN ISO 15012-1 - HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 1: REQUIREMENTS FOR TESTING AND MARKING OF SEPARATION EFFICIENCY |
| 12/30266246 DC : DRAFT SEP 2012 | BS ISO 8243 - CIGARETTES - SAMPLING |
| I.S. EN 60335-2-69:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH FOR COMMERCIAL USE (IEC 60335-2-69:2012 (MOD)) |
| 12/30227451 DC : DRAFT AUG 2012 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| 15/30295526 DC : 0 | BS EN ISO 4674-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS |
| BS EN 15383 : 2012 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| BS ISO 8573-6:2003 | Compressed air Test methods for gaseous contaminant content |
| 07/30161814 DC : 0 | BS EN 60335-2-69 AMD2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR INDUSTRIAL AND COMMERCIAL USE |
| 08/30195352 DC : 0 | BS EN 60335-2-69 FPRAC - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWERBRUSH, FOR INDUSTRIAL AND COMMERCIAL USE |
| 17/30335677 DC : 0 | BS EN ISO 178 - PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| 09/30203717 DC : 0 | BS ISO 4603:1993+AMD1 - TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| DIN EN ISO 5667-1:2007-04 | Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2006) |
| ISO/TS 17444-2:2017 | Electronic fee collection — Charging performance — Part 2: Examination framework |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| ISO 8243:2013 | Cigarettes Sampling |
| I.S. EN 1170-8:2008 | TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| ISO 14820-1:2016 | Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling |
| I.S. ENV 1006:2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
| ISO 11554:2017 | Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam power, energy and temporal characteristics |
| NF ISO 4603 : 1996 AMD 1 2011 | TEXTILE GLASS - WOVEN FABRICS - DETERMINATION OF THICKNESS |
| UNE-EN 12467:2013 | Fibre-cement flat sheets - Product specification and test methods |
| 14/30301874 DC : 0 | BS EN 16770 - SAFETY OF WOODWORKING MACHINES - CHIP AND DUST EXTRACTION SYSTEMS FOR INDOOR INSTALLATION - SAFETY REQUIREMENTS |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| PREN 12705 : DRAFT 2010 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - DETERMINATION OF COLOUR CHANGE OF WHITE OR BRIGHT COLOURED LEATHER SURFACES BY MIGRATION |
| ISO 29042-8:2011 | Safety of machinery Evaluation of the emission of airborne hazardous substances Part 8: Room method for the measurement of the pollutant concentration parameter |
| ISO 10904:2011 | Fibre-cement corrugated sheets and fittings for roofing and cladding |
| EN 492:2012+A2:2018 | Fibre-cement slates and fittings - Product specification and test methods |
| ISO 9125:2009 | Fibre-cement slates and fittings Product specification and test methods |
| CEN ISO/TS 17444-2:2017 | Electronic fee collection - Charging performance - Part 2: Examination framework (ISO/TS 17444-2:2017) |
| ISO 9384:1991 | Fibre-cement siding shingles |
| ISO 8573-5:2001 | Compressed air — Part 5: Test methods for oil vapour and organic solvent content |
| EN ISO 180:2000/A2:2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000/AMD 2:2013) |
| DIN EN ISO 14125:2011-05 | Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
| DIN EN ISO 14130:1998-02 | FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| DIN EN 1093-9:2008-11 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| DIN EN ISO 604 E : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| BS EN ISO 1973:1996 | Textile fibres. Determination of linear density. Gravimetric method and vibroscope method |
| BS EN ISO 14126:1999 | Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
| UNE-EN ISO 179-1:2011 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| BS EN 13782:2015 | Temporary structure. Tents. Safety |
| UNE-EN 494:2013 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| ONORM EN ISO 180 : 2013 | PLASTICS - DETERMINATION OF IZOD IMPACT STRENGTH (ISO 180:2000 + AMD. 1:2006 + AMD. 2:2013) |
| DIN EN ISO 604:2003-12 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
| ISO 15012-4:2016 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 4: General requirements |
| ISO 179:1993 | Plastics Determination of Charpy impact strength |
| BS EN 12763:2000 | Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery |
| BS EN 13923:2005 | Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing |
| BS EN ISO 5667-1:2006 | Water quality. Sampling Guidance on the design of sampling programmes and sampling techniques |
| BS EN 12779:2015 | Safety of woodworking machines. Chip and dust extraction systems with fixed installation. Safety requirements |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
| UNE-EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| BS EN ISO 15012-1:2013 | Health and safety in welding and allied processes. Equipment for capture and separation of welding fume Requirements for testing and marking of separation efficiency |
| BS EN 20140-2:1993 | Determination, verification and application of precision data |
| UNE-EN 13782:2016 | Temporary structure - Tents - Safety |
| BS EN 12705:2011 | Adhesives for leather and footwear materials. Determination of colour change of white or bright coloured leather surfaces by migration |
| ISO 6259-1:2015 | Thermoplastics pipes Determination of tensile properties Part 1: General test method |
| ISO 15012-2:2008 | Health and safety in welding and allied processes Requirements, testing and marking of equipment for air filtration Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles |
| ISO 4674-1:2016 | Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods |
| ISO 6603-2:2000 | Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
| ISO 14130:1997 | Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
| BS EN ISO 6259-1:2015 | Thermoplastics pipes. Determination of tensile properties General test method |
| UNE EN 15383 : 0 | PLASTICS PIPING SYSTEMS FOR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - MANHOLES AND INSPECTION CHAMBERS |
| UNE-EN ISO 14125:1999 | FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998) |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| ISO 5079:1995 | Textile fibres Determination of breaking force and elongation at break of individual fibres |
| BS EN ISO 179-1:2010 | Plastics. Determination of Charpy impact properties Non-instrumented impact test |
| BS EN 1093-9 : 1999 | SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: POLLUTANT CONCENTRATION PARAMETER, ROOM METHOD |
| ISO 14126:1999 | Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
| BS EN ISO 10456:2007 | Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values |
| BS EN 1482-1:2007 | Fertilizers and liming materials. Sampling and sample preparation Sampling |
| DIN EN 843-5:2007-03 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| EN 1482-1:2007 | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |
| EN ISO 15310:2005 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN ISO 14130 : 1997 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
| EN ISO 14126:1999/AC:2002 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN 15383:2012+A1:2013 | Plastics piping systems for drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers |
| EN ISO 11554:2017 | Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics (ISO 11554:2017) |
| EN 13782:2015 | Temporary structure - Tents - Safety |
| EN ISO 4674-1:2016 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| EN ISO 604 : 2003 | PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002) |
| EN ISO 6603-2:2000 | Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000) |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN 1392:2006 | Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions |
| EN 843-5:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN ISO 6259-1:2015 | Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
| EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ENV 843-5 : 1996 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL TESTS AT ROOM TEMPERATURE - STATISTICAL ANALYSIS |
| EN 494:2012+A1:2015 | Fibre-cement profiled sheets and fittings - Product specification and test methods |
| EN 1482:1996/AC:1996 | SAMPLING OF SOLID FERTILIZERS AND LIMING MATERIALS |
| EN ISO 15012-2:2008 | Health and safety in welding and allied processes - Requirements, testing and marking of equipment for air filtration - Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles (ISO 15012-2:2008) |
| EN ISO 14129 : 1997 | FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997) |
| EN ISO 15012-1:2013 | Health and safety in welding and allied processes - Equipment for capture and separation of welding fume - Part 1: Requirements for testing and marking of separation efficiency (ISO 15012-1:2013) |
| UNI EN ISO 5667-1 : 2007 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| EN ISO 5667-1 : 2006 COR 2007 | WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| NF EN ISO 178 : 2011 AMD 1 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES |
| UNI EN ISO 15012-2 : 2008 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| I.S. EN 1013-3:1998 | LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 3: SPECIFIC REQUIREMENTS AND TEST METHODS FOR SHEETS OF POLYVINYL CHLORIDE (PVC) |
| I.S. EN 492:2012 | Fibre-cement slates and fittings - Product specification and test methods |
| ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
| DIN EN ISO 15012-2:2008-06 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - REQUIREMENTS, TESTING AND MARKING OF EQUIPMENT FOR AIR FILTRATION - PART 2: DETERMINATION OF THE MINIMUM AIR VOLUME FLOW RATE OF CAPTOR HOODS AND NOZZLES |
| 15/30302738 DC : 0 | BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
| DIN EN 1170-8 :2009-05 | TEST METHOD FOR GLASS-FIBRE REINFORCED CEMENT - PART 8: CYCLIC WEATHERING TYPE TEST |
| BS ISO 8573-3:1999 | Compressed air Test methods for measurement of humidity |
| BS ISO 12500-2:2007 | Filters for compressed air. Test methods Oil vapours |
| 13/30274532 DC : 0 | BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
| 05/30085837 DC : DRAFT JUN 2005 | EN ISO 5667-1 - WATER QUALITY - SAMPLING - PART 1: GUIDANCE ON THE DESIGN OF SAMPLING PROGRAMMES AND SAMPLING TECHNIQUES |
| 15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
| BIS IS 13360-5-8 : 2013 | PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES |
| DIN EN 16480:2014-06 (Draft) | PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
| BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
| 07/30169285 DC : 0 | BS ISO 8336 - FIBRE-CEMENT FLAT SHEETS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN ISO 8243:2015-12 | CIGARETTES - SAMPLING (ISO 8243:2013) |
| UNE-ISO 4582:2014 | Plastics. Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources |
| BS ISO 8573-4:2001 | Compressed air Test methods for solid particle content |
| BS ISO 4582:2017 | Plastics. Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| 03/102177 DC : DRAFT OCT 2003 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
| BS ISO 7772-1:1998 | Assessment of industrial laundry machinery by its effect on textiles Washing machines |
| BS ISO 2230:2002 | Rubber products. Guidelines for storage |
| ASTM D 5942 : 1996 | Test Method for Determination of Charpy Impact Strength (Withdrawn 1998) |
| ISO 8573-4:2001 | Compressed air Part 4: Test methods for solid particle content |
| PREN 494 : DRAFT 2010 | FIBRE-CEMENT PROFILED SHEETS AND FITTINGS - PRODUCT SPECIFICATION AND TEST METHODS |
| S.R. CEN ISO/TS 17444-2:2017 | ELECTRONIC FEE COLLECTION - CHARGING PERFORMANCE - PART 2: EXAMINATION FRAMEWORK (ISO/TS 17444-2:2017) |
| ASTM D 5943 : 1996 | Test Method for Determination of Flexural Properties (Withdrawn 1998) |
| I.S. EN ISO 15012-4:2016 | HEALTH AND SAFETY IN WELDING AND ALLIED PROCESSES - EQUIPMENT FOR CAPTURE AND SEPARATION OF WELDING FUME - PART 4: GENERAL REQUIREMENTS (ISO 15012-4:2016) |
| ISO 5308:1992 | Solid fertilizers Method of checking the performance of mechanical devices for sampling of product moving in bulk |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 19085-3:2017 | Woodworking machines Safety requirements Part 3: Numerically controlled (NC) boring and routing machines |
| PREN 17129 : DRAFT 2017 | CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION |
| ONORM EN ISO 178 : 2013 | PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010 + AMD 1:2013) |
| ISO 8573-6:2003 | Compressed air — Part 6: Test methods for gaseous contaminant content |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| DIN EN 326-2 E : 2000 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN ISO 179-1:2010-11 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| UNE-EN ISO 4674-1:2017 | Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2016) |
| BS EN ISO 14130:1998 | Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
| UNE-EN 12779:2016 | Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements |
| ISO 5667-1:2006 | Water quality Sampling Part 1: Guidance on the design of sampling programmes and sampling techniques |
| BS EN 1013-3:1998 | Light transmitting profiled plastic sheeting for single skin roofing Specific requirements and test methods for sheets of polyvinyl chloride (PVC) |
| BS EN ISO 15310:2005 | Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
| ISO 15012-1:2013 | Health and safety in welding and allied processes Equipment for capture and separation of welding fume Part 1: Requirements for testing and marking of separation efficiency |
| BS EN ISO 527-1:2012 | Plastics. Determination of tensile properties General principles |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| DIN EN ISO 4674-1:2017-03 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF TEAR RESISTANCE - PART 1: CONSTANT RATE OF TEAR METHODS (ISO 4674-1:2016) |
| DIN EN ISO 527-1:2012-06 | PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL PRINCIPLES (ISO 527-1:2012) |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 1482-1:2007-04 | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |
| EN 1244:1998 | Adhesives - Determination of the colour and/or colour changes of adhesive coats under the influence of light |
| DIN EN ISO 15310:2005-10 | Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
| EN 60335-2-69:2012 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use |
| BS 2782-3.359(1993) : 1993 AMD 8643 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF CHARPY IMPACT STRENGTH |
| BS 2782-3.345A(1993) : 1993 AMD 8637 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |
| NF EN ISO 8256 : 2005 | PLASTICS - DETERMINATION OF TENSILE-IMPACT STRENGTH |
| BS 2750-2(1993) : 1993 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - DETERMINATION, VERIFICATION AND APPLICATION OF PRECISION DATA |
| BS 2782-3.350(1993) : 1993 AMD 8641 | METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF IZOD IMPACT STRENGTH |
| ISO 3534:1977 | Statistics — Vocabulary and symbols |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
£39.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.