• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 2859-2:1985

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

15-02-2020

Language(s)

English, French

Published date

29-08-1985

Can be used when the switching rules in ISO 2859-1 are not applied. Indexing is by a preferred series of limiting qualities with a consumer's risk usually below 10 % and always below 13 %. Procedures are provided to cater for two situations: Procedure A to be used when the supplier and the consumer both wish to regard the lot in isolation (shall be used unless there is a specific instruction to use procedure B), procedure B to be used when the supplier regards the lot as one of continuing series but the consumer considers the lot received in isolation.

DevelopmentNote
Also numbered as BS 6001(1993). (06/2004) DRAFT ISO/DIS 2859-2 is also available for this standard. (11/2007)
DocumentType
Standard
Pages
21
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy

Standards Relationship
JIS Z 9015-2:1999 Identical
BIS IS 2500-3 : 1995(R2004) Identical
NBN ISO 2859 2 : 1993 Identical
UNE 66020-2:2001 Identical
AS 1199.2-2003 Identical
UNE-ISO 2859-2:2012 Identical
UNI ISO 2859-2 : 1993 Identical
PN ISO 2859-2 : 1996 Identical
NS ISO 2859-2 : 1ED 1985 Identical
DIN ISO 2859-2:1993-04 Identical
BS 6001-2:1984 Similar to
UNE 66020-2:1988 Identical

ISO 11596:2008 Jewellery Sampling of precious metal alloys for and in jewellery and associated products
CEI EN 62058-11 : 2011 ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
UNI CEN/TS 13476-4 : 2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYLS CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 2859-5:2005 Sampling procedures for inspection by attributes Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
API 11D3 :2008 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
BS ISO 3951-2:2013 Sampling procedures for inspection by variables General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
PD CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U) Guidance for assessment of conformity
DD CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance for the assessment of conformity
BS ISO 3951-1:2013 Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
VDE 0212-2 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS 6002-2:2007 Sampling procedures for inspection by variables General guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
BS ISO 13448-1:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach
12/30247200 DC : 0 BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
ISO 28598-2:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 2: Coordinated single sampling plans for acceptance sampling by attributes
I.S. EN 12206-1:2004 PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER
10/30219542 DC : 0 BS 6001-1/A1 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION
CEI EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
BS ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principles (APP) Coordinated single sampling plans for acceptance sampling by attributes
PD CR 13909:2002 Identification card systems. Intersector thin flexible cards. Acceptance criteria
BS ISO 12686:1999 Metallic and other inorganic coatings. Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish
BS ISO 3534-2:2006 Statistics. Vocabulary and symbols Applied statistics
BS ISO 6305-2:2007 Railway components. Technical delivery requirements Non-alloy carbon steel baseplates
CEI EN 60300-3-2 : 2006 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
CSA C1325 : 1999 : R2016 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
UNE-EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials
CEI EN 61325 : 1998 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 61325:1997 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
CEI EN 50365 : 2004 ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS
ISO 13448-2:2004 Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 2: Coordinated single sampling plans for acceptance sampling by attributes
UNE-ISO 2859-1:2012 Sampling procedures for inspection by attributes -- Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
17/30333593 DC : 0 BS EN 17085 - PAPER AND BOARD - SAMPLING PROCEDURES FOR PAPER AND BOARD FOR RECYCLING
UNI CEN ISO/TS 22391-7 : 2012 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 3951-5:2006 Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
I.S. EN 448:2015 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
DIN EN 12470-1:2009-11 Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device
DIN EN 326-3 E : 2004 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
BS EN 12006-2 : 1998 NON-ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
BS EN 326-3:2003 Wood-based panels. Sampling, cutting and inspection Inspection of an isolated lot of panels
BS EN 12206-1:2004 Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder
BS EN 12737 : 2004 PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK
ISO 4589-2:2017 Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
VDE 0212-3 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
DIN EN 12470-3:2000-04 CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
EN 125000:1997 Generic Specification: Cores made of ferrite materials
DIN EN ISO 186:2002-08 Paper and board - Sampling to determine average quality (ISO 186:2002); German version EN ISO 186:2002
EN 50365:2002 Electrically insulating helmets for use on low voltage installations
EN 60300-3-2 : 2005 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 4: Guidance for the assessment of conformity
EN 13549:2001 Cleaning services - Basic requirements and recommendations for quality measuring systems
EN 61284:1997 Overhead lines - Requirements and tests for fittings
EN 12470-2:2000+A1:2009 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers
EN 12470-3:2000+A1:2009 Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predictive and predictive) with maximum device
EN 12470-1:2000+A1:2009 Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device
DIN EN ISO 4527:2003-10 METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS SPECIFICATION AND TEST METHODS
EN 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
BS 6001-0:2006 Sampling procedures for inspection by attributes Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes
ENV 1401-2:2000 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity
OVE/ONORM EN 50397-2 : 2010 COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA
BS 6001-0(2017) : 2017 SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES
14/30294476 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
I.S. EN 12470-5:2003 CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE)
UNI ISO/TR 8550-2 : 2014 GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 2: SAMPLING BY ATTRIBUTES
BS EN 50365:2002 Electrically insulating helmets for use on low voltage installations
BS EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC Accessories for covered conductors. Tests and acceptance criteria
UNI ISO 2859-10 : 2007 SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: INTRODUCTION TO THE ISO 2859 SERIES OF STANDARDS FOR SAMPLING FOR INSPECTION BY ATTRIBUTES
S.R. CR 13909:2000 IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA
BS EN 350:2016 Durability of wood and wood-based products. Testing and classification of the durability to biological agents of wood and wood-based materials
EN 12206-1:2004 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
09/30202307 DC : 0 BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS
03/312758 DC : DRAFT AUG 2003 ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE
BS ISO 28590:2017 Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
BS ISO 28598-1:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) Guidelines for the APP approach
07/30161646 DC : 0 BS EN 15646 - ELECTRODEPOSITED COATINGS - ELECTROPLATED COATINGS OF ALUMINIUM AND ALUMINIUM ALLOYS WITH SUPPLEMENTARY TREATMENT - REQUIREMENTS AND TEST METHODS
I.S. EN 125000:1999 CORES MADE FROM FERRITE MATERIALS (GENERIC SPECIFICATION)
NF EN 61854 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
I.S. EN 62058-11:2010 ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
UNE-EN 62058-11:2011 Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods
UNE-ISO 2859-5:2014 Sampling procedures for inspection by attributes. Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
CEI EN 61854 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN 61897:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
I.S. EN 61193-3:2013 QUALITY ASSESSMENT SYSTEMS - PART 3: SELECTION AND USE OF SAMPLING PLANS FOR PRINTED BOARD AND LAMINATE END-PRODUCT AND IN-PROCESS AUDITING (IEC 61193-3:2013 (EQV))
I.S. EN 60300-3-2:2005 DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
PREN 448 : DRAFT 2018 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
S.R. CEN/TS 1401-2:2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
CEN ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2011)
NF EN 50365 : 2002 ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS
I.S. CEN TS 1555-7:2003 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
NF EN 12206-1 : 2011 PAINTS AND VARNISHES - COATING OF ALUMINIUM AND ALUMINIUM ALLOYS FOR ARCHITECTURAL PURPOSES - PART 1: COATINGS PREPARED FROM COATING POWDER
DIN EN 12470-2:2009-11 Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers (includes Amendment A1:2009)
DIN EN 326-3:2004-02 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
DIN EN ISO 4589-2:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
BS EN ISO 4527:2003 Metallic coatings. Autocatalytic (electroless) nickel-phosphorus alloy coatings. Specification and test methods
IEC 62058-11:2008 Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods
EN 61854:1998 Overhead lines - Requirements and tests for spacers
BS EN 295-2:2013 Vitrified clay pipe systems for drains and sewers Evaluation of conformity and sampling
IEC 61897:1998 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
BS EN 12470-3 : 2000 CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
DIN EN 12470-5:2003-09 CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE)
DIN EN 12470-4:2001-02 CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
DIN EN 12206-1:2004-09 Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder
I.S. EN 295-2:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
DIN EN 61897 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
I.S. EN ISO 4589-2:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
I.S. EN 326-3:2003 WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 3: INSPECTION OF AN ISOLATED LOT OF PANELS
I.S. EN 12470-2:2000 CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
I.S. EN 12470-1:2000 CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE
I.S. EN ISO 1461:2009 HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
I.S. EN 12737:2004 PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK
UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
DIN EN 61284 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
BS 6000:1996 Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots
ONORM EN ISO 1461 : 2009 HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
BS 6002-1:2007 Sampling procedures for inspection by variables Guide to single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
VDE 0212-1 : 1998 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
NF EN 62058-11 : 2010 ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
BS ISO/TR 12031:2000 Micrographics. Inspection of silver-gelatin microforms for evidence of deterioration
BIS IS 2500-1 : 2000(R2017) SAMPLING PROCEDURE FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION
BS EN 62058-11:2010 Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods
15/30312397 DC : 0 BS EN 16866 - METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST)
BS ISO 7198:1998 Cardiovascular implants. Tubular vascular prostheses
DIN EN 61854 : 1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
97/101296 DC : DRAFT FEB 1997 PREN 12737 - PRECAST CONCRETE FLOOR SLATS FOR LIVESTOCK
07/30167025 DC : 0 BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS
I.S. EN 16602-70-46:2014 SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS
DIN EN ISO 17668:2016-06 ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016)
BS ISO 10587:2000 Metallic and other inorganic coatings. Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods. Inclined wedge method
04/19983407 DC : DRAFT OCT 2004 BS 6001-10 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 10: OVERVIEW OF THE BS 6001 (ISO 2859) ATTRIBUTE SAMPLING SYSTEMS
BS ISO 4589-2 : 1996 AMD 10627 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - AMBIENT-TEMPERATURE TEST
BS 6001-0:1996 Sampling procedures for inspection by attributes Introduction to the BS 6001 attribute sampling system
02/121776 DC : DRAFT APR 2002 PREN 14403 - SAMPLING OF THE PRECIOUS METAL ALLOYS IN JEWELLERY AND ASSOCIATED PRODUCTS
API 11D3 : 2008 : R2015 PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS
14/30312373 DC : 0 BS EN 350 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE RESISTANCE TO BIOLOGICAL AGENTS, THE PERMEABILITY TO WATER AND THE PERFORMANCE OF WOOD AND WOOD-BASED MATERIALS
BS EN 125000:1998 Harmonized system of quality assessment for electronic components. Generic specification: cores made of ferrite materials
BS EN 61193-3:2013 Quality assessment systems Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
BS EN 60383-1:1998 Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria
BS EN 16602-70-46:2014 Space product assurance. Requirements for manufacturing and procurement of threaded fasteners
I.S. EN 16866:2017 METALLIC AND OTHER INORGANIC COATINGS - SIMULTANEOUS THICKNESS AND ELECTRODE POTENTIAL DETERMINATION OF INDIVIDUAL LAYERS IN MULTILAYER NICKEL DEPOSITS (STEP TEST)
DD ENV 1401-2:2001 Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinylchloride) (PVC-U) Guidance for assessment of conformity
I.S. EN ISO 17668:2016 ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016)
I.S. EN 61854:1999 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
ISO 28598-1:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) — Part 1: Guidelines for the APP approach
NF EN 61284 : 2000 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
UNI ISO 3534-2 : 2014 STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
UNI ISO/TR 8550-3 : 2014 GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES
ISO/TR 8550-1:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 1: Acceptance sampling
ISO/TR 8550-2:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 2: Sampling by attributes
ISO/TS 22391-7:2011 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance (PE-RT) Part 7: Guidance for the assessment of conformity
ISO 2859-0:1995 Sampling procedures for inspection by attributes — Part 0: Introduction to the ISO 2859 attribute sampling system
DIN EN 12737:2008-02 PRECAST CONCRETE PRODUCTS - FLOOR SLATS FOR LIVESTOCK
DIN EN 12470-3:2009-11 CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
DIN EN 12470-4:2009-11 CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
DIN EN ISO 4589-2 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST (ISO 4589-2:2017)
DIN EN 295-2:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
DIN EN 448:2016-02 DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
BS EN 13549:2001 Cleaning services. Basic requirements and recommendations for quality measuring systems
ISO 17668:2016 Zinc diffusion coatings on ferrous products Sherardizing Specification
BS EN 12470-5:2003 Clinical thermometers Performance of infra-red ear thermometers (with maximum device)
GEIA TA HB 0009 : 2013 RELIABILITY PROGRAM HANDBOOK
EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
I.S. EN 12006-2:1998 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
UNI EN 12470-3 : 2009 CLINICAL THERMOMETERS - PART 3: PERFORMANCE OF COMPACT ELECTRICAL THERMOMETERS (NON-PREDICTIVE AND PREDICTIVE) WITH MAXIMUM DEVICE
UNI EN 12470-4 : 2009 CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
UNI EN 12006-2 : 2009 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
UNI EN 12470-1 : 2009 CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE
UNI EN 12470-2 : 2009 CLINICAL THERMOMETERS - PART 2: PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
BS 4778-2:1991 Quality vocabulary Quality concepts and related definitions
UNI ISO 3951-2 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
UNI EN ISO 1461 : 2009 HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS
03/102273 DC : DRAFT MAR 2003 BS ISO 13448-0 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION OF PRIORITIES PRINCIPLES (APP) - PART 1: GUIDELINES FOR THE APP APPROACH
PD CEN/TS 13476-4:2013 Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Guidance for the assessment of conformity
BS ISO 11596:2008 Jewellery. Sampling of precious metal alloys for and in jewellery and associated products
16/30319043 DC : 0 BS EN ISO 4589-2 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 2: AMBIENT-TEMPERATURE TEST
PREN 295-2 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
BS 5341-6.5:1992 Piston rings up to 200 mm diameter for reciprocating internal combustion engines. Vocabularly, inspection methods and generic specifications. Quality requirements
BS EN ISO 17668:2016 Zinc diffusion coatings on ferrous products. Sherardizing. Specification
10/30216987 DC : 0 BS EN 295-2 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 2: EVALUATION OF CONFORMITY AND SAMPLING
OIML G 20 : 2017 SURVEILLANCE OF UTILITY METERS IN SERVICE ON THE BASIS OF SAMPLING INSPECTIONS
04/30119227 DC : DRAFT SEP 2004 BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
94/110814 DC : DRAFT JAN 1995 ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS
DD CEN/TS 1555-7:2003 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Guidance for the assessment of conformity
03/108624 DC : DRAFT JULY 2003 IEC 60300-3-2 - DEPENDABILITY MANAGEMENT - PART 3-2: APPLICATION GUIDE - COLLECTION OF DEPENDABILITY DATA FROM THE FIELD
16/30340580 DC : 0 BS EN 17009 - FLOORING OF LIGNIFIED MATERIALS OTHER THAN WOOD - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING
BS EN 60300-3-2:2005 Dependability management Application guide. Collection of dependability data from the field
04/30107683 DC : DRAFT DEC 2004 BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS
07/30165568 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE
PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
UNE-ISO 3951-1:2012 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
BS 6002-4:2006 Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
07/30168266 DC : 0 BS ISO 27830 - METALLIC AND OTHER INORGANIC COATINGS - STANDARD GUIDE FOR SPECIFYING SUCH COATINGS
ISO 3951-2:2013 Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
UNE-ISO 2859-10:2013 Sampling procedures for inspection by attributes -- Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
CR 13909 : 2000 IDENTIFICATION CARD SYSTEMS - INTERSECTOR THIN FLEXIBLE CARDS - ACCEPTANCE CRITERIA
S.R. CEN/TS 13476-4:2013 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - STRUCTURED-WALL PIPING SYSTEMS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 4: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY
ISO 2859-10:2006 Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 3951-1:2013 Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
ISO/TR 8550-3:2007 Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables
ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
IEC 61854:1998 Overhead lines - Requirements and tests for spacers
DIN EN 10242:1995-03 THREADED PIPE FITTING IN MALLEABLE CAST IRON
DIN EN ISO 1461:2009-10 Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009)
DIN EN ISO 186 E : 2002 PAPER AND BOARD - SAMPLING TO DETERMINE AVERAGE QUALITY
BS EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index Ambient-temperature test
IEC 60300-3-2:2004 Dependability management - Part 3-2: Application guide - Collection of dependability data from the field
BS EN ISO 15136-2:2006 Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems
UNE-EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
ISO 15136-2:2006 Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems
ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
BS EN 12470-4 : 2001 CLINICAL THERMOMETERS - PART 4: PERFORMANCE OF ELECTRICAL THERMOMETERS FOR CONTINUOUS MEASUREMENT
IEC 61193-3:2013 Quality assessment systems - Part 3: Selection and use of sampling plans for printed board and laminate end-product and in-process auditing
BS EN 12470-2 : 2001 CLINICAL THERMOMETERS - PHASE CHANGE TYPE (DOT MATRIX) THERMOMETERS
BS EN ISO 186:2002 Paper and board. Sampling to determine average quality
UNE-EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
BS EN ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods
CEN/TS 1401-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for assessment of conformity
UNE-ISO 3951-2:2012 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
UNE-EN 448:2017 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
BS EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices. Statistical aspects
EN 16866:2017 Metallic and other inorganic coatings - Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
EN ISO 17668:2016 Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016)
EN ISO 186 : 2002 Paper and board - Sampling to determine average quality (ISO 186:2002)
EN 16602-70-46:2014 Space product assurance - Requirements for manufacturing and procurement of threaded fasteners
EN 12006-2:1998+A1:2009 Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 2: Vascular prostheses including cardiac valve conduits
EN 326-3:2003 Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
EN 12470-4:2000+A1:2009 Clinical thermometers - Part 4: Performance of electrical thermometers for continuous measurement
EN 350:2016 Durability of wood and wood-based products - Testing and classification of the durability to biological agents of wood and wood-based materials
EN ISO 4589-2:2017 Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
EN 448:2015 District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
EN 295-2:2013 Vitrified clay pipe systems for drains and sewers - Part 2: Evaluation of conformity and sampling
EN ISO 15136-2:2006 Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006)
EN 13975:2003 Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - Statistical aspects
EN ISO 17526:2003 Optics and optical instruments - Lasers and laser-related equipment - Lifetime of lasers (ISO 17526:2003)
EN ISO 4527 : 2003 METALLIC COATINGS - AUTOCATALYTIC (ELECTROLESS) NICKEL-PHOSPHORUS ALLOY COATINGS - SPECIFICATION AND TEST METHODS (ISO 4527:2003)
EN 13628-2:2002 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Part 2: Industrial methods
ISO 6305-2:2007 Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates
BS EN 61854:1998 Overhead lines. Requirements and tests for spacers
12/30245656 DC : 0 ISO/DIS 3951-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS
CEI EN 50397-2 : 2011 COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA
NF EN 61897 : 2001 OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
BS EN 61897:1999 Overhead lines. Requirements and tests for Stockbridge type aeolian vibration dampers
04/30110040 DC : DRAFT FEB 2004 BS 6001-4 - SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 4: SYSTEM OF SEQUENTIAL SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION
14/30256684 DC : 0 BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION
BS EN 61284:1998 Overhead lines. Requirements and tests for fittings
UNE-ISO 3534-2:2013 Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
UNI ISO 3951-1 : 2014 SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL
ISO/TR 12031:2000 Micrographics Inspection of silver-gelatin microforms for evidence of deterioration
DIN EN ISO 17668 E : 2016 ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016)
BS EN 16866:2017 Metallic and other inorganic coatings. Simultaneous thickness and electrode potential determination of individual layers in multilayer nickel deposits (STEP test)
BS ISO 28598-2:2017 Acceptance sampling procedures based on the allocation of priorities principle (APP) Coordinated single sampling plans for acceptance sampling by attributes
S.R. CEN ISO/TS 22391-7:2011 PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT) - PART 7: GUIDANCE FOR THE ASSESSMENT OF CONFORMITY (ISO/TS 22391-7:2011)
SAE ARP 9013 : 2005 STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
00/564528 DC : DRAFT SEP 2000 BS EN 13975 - SAMPLING PROCEDURES USED FOR ACCEPTANCE TESTING OF INVITRO DIAGNOSTIC MEDICAL DEVICES - STATISTICAL ASPECTS
07/30152250 DC : 0 BS ISO 11596 - SAMPLING OF THE PRECIOUS METAL ALLOYS FOR AND IN JEWELLERY AND ASSOCIATED PRODUCTS
CSA C1325 : 1999 : R2011 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
UNI ISO/TR 8550-1 : 2014 GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 1: ACCEPTANCE SAMPLING
I.S. EN 50397-2:2009 COVERED CONDUCTORS FOR OVERHEAD LINES AND THE RELATED ACCESSORIES FOR RATED VOLTAGES ABOVE 1 KV AC AND NOT EXCEEDING 36 KV AC - PART 2: ACCESSORIES FOR COVERED CONDUCTORS - TESTS AND ACCEPTANCE CRITERIA
I.S. EN 50365:2002 ELECTRICALLY INSULATING HELMETS FOR USE ON LOW VOLTAGE INSTALLATIONS
18/30368651 DC : 0 BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE
I.S. EN 350:2016 DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE DURABILITY TO BIOLOGICAL AGENTS OF WOOD AND WOOD-BASED MATERIALS
SAE ARP 9013/1 : 2005 STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS USING ISOLATED LOT SAMPLING METHODS
ISO 13448-1:2005 Acceptance sampling procedures based on the allocation of priorities principle (APP) Part 1: Guidelines for the APP approach
UNI CEN/TS 1401-2 : 2012 PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGRONUD DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 2: GUIDANCE FOR ASSESSMENT OF CONFORMITY
BS EN 448:2015 District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene
ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
DIN EN 12006-2:2009-08 NON ACTIVE SURGICAL IMPLANTS - PARTICULAR REQUIREMENTS FOR CARDIAC AND VASCULAR IMPLANTS - PART 2: VASCULAR PROSTHESES INCLUDING CARDIAC VALVE CONDUITS
BS EN 13628-2:2002 Packaging. Flexible packaging material. Determination of residual solvents by static headspace gas chromatography Industrial methods
BS EN 12470-1 : 2000 CLINICAL THERMOMETERS - PART 1: METALLIC LIQUID-IN-GLASS THERMOMETERS WITH MAXIMUM DEVICE
ISO 4527:2003 Metallic coatings Autocatalytic (electroless) nickel-phosphorus alloy coatings Specification and test methods
EN 61897:1998 Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
ISO 186:2002 Paper and board — Sampling to determine average quality
BS 6001-1(1999) : 1999 SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 1: SAMPLING SCHEMES INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION
EN 12737:2004+A1:2007 Precast concrete products - Floor slats for livestock
EN 12470-5 : 2003 CLINICAL THERMOMETERS - PART 5: PERFORMANCE OF INFRA-RED EAR THERMOMETERS (WITH MAXIMUM DEVICE)
EN 62058-11:2010 Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods
EN 61325 : 1995 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
BS 6001-4:2005 Sampling procedures for inspection by attributes System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
EN 50397-2:2009 Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV AC and not exceeding 36 kV AC - Part 2: Accessories for covered conductors - Tests and acceptance criteria
BS 627(1991) : 1991 AMD 8670 METHODS FOR SAMPLING OF ANIMAL AND VEGETABLE FATS AND OILS

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.