• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3251:2008

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Paints, varnishes and plastics Determination of non-volatile-matter content
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

16-05-2019

Language(s)

English, French, Russian

Published date

31-01-2008

ISO 3251:2008 specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions, etc.).

The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners and film-forming agents). For the method to be usable for unplasticized polymer dispersions and rubber latices, the non-volatile residue (which consists essentially of the polymeric material and of small quantities of auxiliaries such as emulsifiers, protective colloids, stabilizers, solvents added as film-forming agents and especially for rubber latex concentrate preserving agents) has to be chemically stable under the test conditions. For plasticized samples, the residue, by definition, normally includes the plasticizer.

DevelopmentNote
Supersedes ISO 1515 (04/2001) Supersedes ISO 1625 and ISO 8618. (03/2003) DRAFT ISO/DIS 3251 is also available for this standard. (05/2018)
DocumentType
Standard
Pages
7
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

02/208319 DC : DRAFT SEP 2002 IEC 60455-3-5 ED.3 - RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS
DIN EN 13381-5:2015-02 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
BS ISO 16525-1:2014 Adhesives. Test methods for isotropic electrically conductive adhesives General test methods
15/30327431 DC : 0 BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES
BS 3900-D11:1998 Methods of test for paints. Optical tests on paint films Determination of contrast ratio (opacity) of light-coloured paints at a fixed spreading rate
PREN 1504-2 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
UNI EN 13381-5 : 2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF - STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
10/30215721 DC : 0 BS EN ISO 3233 - PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE DENSITY OF A DRIED COATING
09/30192396 DC : DRAFT APR 2009 BS ISO 18280 - PLASTICS - EPOXY RESINS - TEST METHODS
ONORM EN 4687 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
13/30236314 DC : 0 BS EN ISO 4618 - PAINTS AND VARNISHES - TERMS AND DEFINITIONS
BS EN ISO 3233-2:2014 Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
BS 6782-16.1(2000) : 2000 AMD 15238 BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS
DIN 55671:2002-09 PAINTS, VARNISHES AND BINDERS FOR PAINTS AND VARNISHES - FOIL METHOD FOR RAPID DETERMINATION OF THE NON-VOLATILE MATTER CONTENT
BS 6782-14.1(2000) : 2000 AMD 10883 BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS
BS EN 16074:2011 Paints and varnishes. Determination of non-volatile matter content and spreading rate of coil coating materials
AEP-61 : 2009 PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS
PREN 2435-05 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
ISO 21809-1:2011 Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP)
I.S. EN 15060:2006 PAINTS AND VARNISHES - GUIDE FOR THE CLASSIFICATION AND SELECTION OF COATING SYSTEMS FOR WOOD BASED MATERIALS IN FURNITURE FOR INTERIOR USE
EN ISO 12944-9:2018 Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
DIN EN 1504-2:2015-03 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
BS EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components
BS EN 2436-006:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 11909:2007 Binders for paints and varnishes. Polyisocyanate resins. General methods of test
ISO 3233-3:2015 Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
DIN ISO 4619:2002-04 DRIERS FOR PAINTS AND VARNISHES
EN 10339:2007 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection
DIN EN 14879-2:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
DIN EN ISO 3233-3:2015-09 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015)
DIN ISO 4619 E : 2002 DRIERS FOR PAINTS AND VARNISHES
BS EN ISO 4619:2010 Driers for paints and varnishes
11/30242926 DC : DRAFT MAY 2011 BS ISO 12000 - PLASTICS/RUBBER - POLYMER DISPERSIONS AND RUBBER LATICES (NATURAL AND SYNTHETIC) - DEFINITIONS AND REVIEW OF TEST METHODS
I.S. EN ISO 16000-11:2006 INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS
BS 6782-17(2001) : 2001 AMD 15242 BINDERS FOR PAINTS - DETERMINATION OF MEQ VALUE OF WATER-DILUTABLE BINDERS
UNI EN ISO 4619 : 2011 DRIERS FOR PAINTS AND VARNISHES
UNI ISO 124 : 2014 LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT
I.S. EN ISO 2114:2000 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
BS EN 4594:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance
DIN EN ISO 3233-1 E : 2013 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013)
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
DIN EN ISO 3233-3 E : 2015 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO 3233-3:2015)
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS ISO 15741:2016 Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
BS ISO 19396-2:2017 Paints and varnishes. Determination of pH value pH electrodes with ISFET technology
DIN EN ISO 3233-1:2013-05 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY-FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013)
12/30256053 DC : 0 BS EN 16383 - THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS)
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
UNI EN ISO 3233-2 : 2014 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE
09/30205299 DC : 0 BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
07/30174613 DC : 0 BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
04/30109201 DC : DRAFT OCT 2004 EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
15/30309731 DC : 0 BS ISO 19396-1 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 1: PH ELECTRODES WITH GLASS MEMBRANE
BS EN 16383:2016 Thermal insulation products for building applications. Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
16/30337293 DC : 0 BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES
ISO 29804:2009 Thermal insulation products for building applications Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material
PREN 4594 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
PREN 2434-05 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
I.S. EN ISO 3233-2:2014 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
I.S. EN 4687:2012 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN 16074:2011 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
BS EN 15814 : 2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
I.S. EN 4595:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
I.S. EN 15814:2011 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
NF EN ISO 4619 : 2011 DRIERS FOR PAINTS AND VARNISHES
I.S. EN ISO 6504-3:2007 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE
BS EN ISO 6504-3:2007 Paints and varnishes. Determination of hiding power Determination of contrast ratio of light-coloured paints at a fixed spreading rate
DIN EN ISO 7142:2007-05 Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)
UNE-EN ISO 4618:2015 Paints and varnishes - Terms and definitions (ISO 4618:2014)
BS EN 4588:2007 Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip
ISO 16000-11:2006 Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
BS EN ISO 11890-1:2007 Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method
I.S. EN ISO 11909:2007 BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST
I.S. EN ISO 4618:2014 PAINTS AND VARNISHES - TERMS AND DEFINITIONS (ISO 4618:2014)
DIN ISO 6744-1:2002-11 BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST
I.S. EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
UNI EN 4687 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
I.S. EN ISO 7142:2007 BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - GENERAL METHODS OF TEST
I.S. EN ISO 11890-1:2007 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
I.S. EN ISO 7143:2007 BINDERS FOR PAINTS AND VARNISHES - METHODS OF TEST FOR CHARACTERIZING WATER-BASED BINDERS
DIN EN 1504-3:2006-03 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN 4687:2012 Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application
BS 3900-A10:1998 Methods of test for paints. Tests on liquid paints (excluding chemical tests) Determination of percentage volume of non-volatile matter by measurement of the density of a dried coating
BS 3900-D11(2007) : 2007 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE
BS 2782-4.432B(2000) : 2000 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
DIN 53219:2009-08 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER - METHOD BY DETERMINATION OF THE PRACTICAL DRY-FILM DENSITY
13/30269216 DC : 0 BS ISO 124 - LATEX, RUBBER - DETERMINATION OF TOTAL SOLIDS CONTENT
BS EN 4595:2013 Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance
DIN 30674-3:2001-03 SHEATHING DUCTILE CAST IRON PIPES - PART 3: ZINC COATING WITH PROTECTIVE SHEATHING
BS EN ISO 3233-1:2013 Paints and varnishes. Determination of the percentage volume of non-volatile matter Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
ISO 3233:1998 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
14/30300605 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
04/30109555 DC : DRAFT FEB 2004 ISO 16000-11 - INDOOR AIR - PART 11: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS - SAMPLING, STORAGE OF SAMPLES AND PREPARATION OF TEST SPECIMENS
DIN EN 15814 E : 2015 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
DIN EN ISO 3233-2:2014-10 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
BS EN ISO 23811:2009 Paints and varnishes. Determination of percentage volume of non-volatile matter by measuring the nonvolatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
UNE-EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO/FDIS 3233-3:2014)
BS 3900-A23(2000) : 2000 AMD 13285 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD
BS EN 4476:2011 Aerospace series. Paints and varnishes. Cold curing intermediate coat
UNE-EN 13381-5:2016 Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite member
PREN 2436-06 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE-FREE TWO COMPONENT COLD CURING EPOXY PRIMER - PART 06: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION
I.S. EN 4594:2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
UNI EN 4594 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE
I.S. EN ISO 3233-1:2013 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE (ISO 3233-1:2013)
UNI EN 16074 : 2011 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
AEP-60 : 2009 PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS
ISO 20340:2009 Paints and varnishes Performance requirements for protective paint systems for offshore and related structures
UNI EN ISO 21809-1 : 2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
I.S. EN ISO 23811:2009 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE
I.S. EN ISO 12944-9:2018 PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018)
UNI EN ISO 3233-1 : 2013 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 1: METHOD USING A COATED TEST PANEL TO DETERMINE NON-VOLATILE MATTER AND TO DETERMINE DRY FILM DENSITY BY THE ARCHIMEDES PRINCIPLE
I.S. EN 60464-2:2002 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
EN ISO 6504-3:2007 Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006)
I.S. EN 12068:1999 CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS
DIN EN 14879-2 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
DIN EN ISO 7143:2007-05 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)
DIN EN 14879-3 E : 2007 ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
DIN EN ISO 11890-1:2007-09 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
BS EN 13966-1:2003 Determination of the transfer efficiency of atomising and spraying equipment for liquid coating materials Flat panels
ISO 6504-3:2006 Paints and varnishes Determination of hiding power Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate
BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete
BS EN ISO 6744-1:2004 Binders for paints and varnishes. Alkyd resins General methods
BS EN 1504-3:2005 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Structural and non-structural repair
ISO 3233-2:2014 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle
UNE-EN ISO 3233-1:2013 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013)
UNE-EN ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014)
DIN EN 1504-2:2005-01 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
DIN EN 1504-7:2006-11 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN ISO 4619:2010 Driers for paints and varnishes (ISO 4619:1998)
EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
EN ISO 16000-11:2006 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006)
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
UNI EN 1504-7 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
UNI EN 1504-5 : 2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
13/30266799 DC : 0 BS EN ISO 3233-3 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL
I.S. EN 13381-5:2014 TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 5: APPLIED PROTECTION TO CONCRETE/PROFILED SHEET STEEL COMPOSITE MEMBER
ISO 15741:2016 Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
07/30083514 DC : 0 BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS
09/30205293 DC : 0 BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION
UNI EN ISO 23811 : 2009 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE
I.S. EN ISO 21809-1:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP)
17/30358597 DC : 0 BS EN ISO 4619 - DRIERS FOR PAINTS AND VARNISHES
BS EN ISO 3233-3:2015 Paints and varnishes. Determination of the percentage volume of non-volatile matter Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
UNE-ISO 124:2011 Latex, rubber -- Determination of total solids content
BS EN 15060:2006 Paints and varnishes. Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
00/120623 DC : DRAFT FEB 2000 ISO/CD 18280 - EPOXIDE RESINS - DEFINITIONS AND TEST METHODS
ISO 12000:2014 Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Definitions and review of test methods
BS ISO 12000:2014 Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
I.S. EN ISO 3233-3:2015 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 3: DETERMINATION BY CALCULATION FROM THE NON-VOLATILE-MATTER CONTENT DETERMINED IN ACCORDANCE WITH ISO 3251, THE DENSITY OF THE COATING MATERIAL AND THE DENSITY OF THE SOLVENT IN THE COATING MATERIAL (ISO/FDIS 3233-3:2014)
BS 6782-8(1996) : 1996 AMD 10178 BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR AMINO RESINS
BS 6782-9(1996) : 1996 AMD 10179 BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR POLYISOCYANATE RESINS
04/30114371 DC : DRAFT JUN 2004 EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION
DIN EN ISO 3233-2 E : 2014 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF THE DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
PREN 4588 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP
UNE-EN 15814:2011 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
BS EN ISO 21809-1:2011 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP)
UNE-EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
ISO 4619:1998 Driers for paints and varnishes
15/30324901 DC : 0 BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
15/30316975 DC : 0 BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
ISO 12968:2010 Thermal insulation products for building applications Determination of the pull-off resistance of external thermal insulation composite systems (ETICS) (foam block test)
UNE-EN ISO 21809-1:2019 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018)
DIN EN ISO 11909:2007-05 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
DIN EN 1504-3:2015-08 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 3: STRUCTURAL AND NON-STRUCTURAL REPAIR
DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
BS EN 1504-7:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection
BS EN ISO 7143:2007 Binders for Paints and varnishes. Methods of test for characterizing water-based binders
BS EN ISO 15880:2004 Paints, varnishes and binders. Determination of MEQ value of water-based coating materials and binders
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
BS EN 10301:2003 Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BS EN ISO 7142:2007 Binders for paints and varnishes. Epoxy resins. General methods of test
BS EN 10339:2007 Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection
ISO 11908:1996 Binders for paints and varnishes — Amino resins — General methods of test
IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value
BS EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components
ISO 6744-1:1999 Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 11909:2007 Binders for paints and varnishes — Polyisocyanate resins — General methods of test
UNE-EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
BS EN 1504-5:2013 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection
ISO 23811:2009 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
BS EN 2435-005:2006 Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
BS EN ISO 4618:2014 Paints and varnishes. Terms and definitions
ISO 7142:2007 Binders for paints and varnishes — Epoxy resins — General methods of test
UNE-EN ISO 4619:2011 Driers for paints and varnishes (ISO 4619:1998)
EN ISO 11908:1998 Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)
EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 1504-3:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair
EN ISO 15880:2004 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
EN ISO 3233-2:2014 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle (ISO 3233-2:2014)
EN ISO 7142:2007 Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007)
EN 4476:2011 Aerospace series - Paints and varnishes - Cold curing intermediate coat
EN ISO 21809-1:2011 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011)
EN ISO 3233-1:2013 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle (ISO 3233-1:2013)
EN 15814:2011+A2:2014 Polymer modified bituminous thick coatings for waterproofing - Definitions and requirements
EN ISO 11909:2007 Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007)
EN 15060:2006 Paints and varnishes - Guide for the classification and selection of coating systems for wood based materials in furniture for interior use
EN ISO 3233-3:2015 Paints and varnishes - Determination of the percentage volume of non-volatile matter - Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material (ISO 3233-3:2015)
EN 4594:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance
EN 16383:2016 Thermal insulation products for building applications - Determination of the hygrothermal behaviour of external thermal insulation composite systems with renders (ETICS)
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 2434-005:2006 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application
EN ISO 23811:2009 Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate (ISO 23811:2009)
EN 2435-005:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application
EN 4595:2013 Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance
EN ISO 6744-1:2004 Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999)
EN 4588:2007 Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip
EN ISO 2114:2000/AC:2005 PLASTICS (POLYESTER RESINS) AND PAINTS AND VARNISHES (BINDERS) - DETERMINATION OF PARTIAL ACID VALUE AND TOTAL ACID VALUE
EN ISO 4618:2014 Paints and varnishes - Terms and definitions (ISO 4618:2014)
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 16074:2011 Paints and varnishes - Determination of non-volatile-matter content and spreading rate of coil coating materials
EN ISO 7143:2007 Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007)
EN 13966-1 : 2003 DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS
EN 2436-006:2006 Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application
BS ISO 4619 : 1998 DRIERS FOR PAINTS AND VARNISHES
BS ISO/TS 12928:1999 Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications
09/30205302 DC : 0 BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
15/30320410 DC : 0 BS EN 16383 - THERMAL INSULATION PRODUCTS FOR BUILDINGS APPLICATIONS - DETERMINATION OF THE HYGROTHERMAL BEHAVIOUR OF EXTERNAL THERMAL INSULATION COMPOSITE SYSTEMS WITH RENDERS (ETICS)
15/30309734 DC : 0 BS ISO 19396-2 - PAINTS AND VARNISHES - DETERMINATION OF PH VALUE - PART 2: PH ELECTRODES WITH ISFET TECHNOLOGY
DIN EN 3840:2007-10 Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007
01/122232 DC : DRAFT JUNE 2001 BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES
ONORM EN 4689 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
BS EN 13381-5:2014 Test methods for determining the contribution to the fire resistance of structural members Applied protection to concrete/profiled sheet steel composite member
12/30215682 DC : 0 BS EN ISO 3233-2 - PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: DETERMINATION BY MEASUREMENT OF THE DRY-FILM DENSITY
04/30123574 DC : DRAFT OCT 2004 EN 14879-3 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 3: COATINGS ON CONCRETE COMPONENTS
UNI EN 4595 : 2013 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
BS 6782-18(2001) : 2001 AMD 15243 BINDERS FOR PAINTS - PART 18: GENERAL METHODS OF TEST FOR WATER-DILUTABLE BINDERS
DIN EN 15814:2015-03 POLYMER MODIFIED BITUMINOUS THICK COATINGS FOR WATERPROOFING - DEFINITIONS AND REQUIREMENTS
BS ISO 19396-1:2017 Paints and varnishes. Determination of pH value pH electrodes with glass membrane
17/30371000 DC : 0 BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
ISO 19396-2:2017 Paints and varnishes — Determination of pH value — Part 2: pH electrodes with ISFET technology
DIN EN ISO 23811:2009-08 PAINTS AND VARNISHES - DETERMINATION OF PERCENTAGE VOLUME OF NON-VOLATILE MATTER BY MEASURING THE NON-VOLATILE MATTER CONTENT AND THE DENSITY OF THE COATING MATERIAL, AND CALCULATION OF THE THEORETICAL SPREADING RATE
BS EN 3840:2007 Aerospace series. Paints and varnishes. Technical specification
ISO 12944-9:2018 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
PREN 1504-7 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
BS ISO 124:2014 Latex, rubber. Determination of total solids content
PREN 4595 : 200P1 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE
00/103366 DC : DRAFT APR 2000 PREN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS
DIN 28054-1:2000-09 CHEMICAL APPARATUS - COATING WITH ORGANIC MATERIALS FOR METALLIC COMPONENTS - PART 1: REQUIREMENTS AND TESTING
DIN V 53216-1:1988-05 DETERMINATION OF THE NON-VOLATILE MATTER CONTENT; METHOD AT ELEVATED TEMPERATURE FOR RESINS, RESIN SOLUTIONS, PAINTS, VARNISHES AND SIMILAR COATING MATERIALS
DIN EN 16074:2011-09 PAINTS AND VARNISHES - DETERMINATION OF NON-VOLATILE-MATTER CONTENT AND SPREADING RATE OF COIL COATING MATERIALS
ISO 19396-1:2017 Paints and varnishes — Determination of pH value — Part 1: pH electrodes with glass membrane
I.S. EN ISO 4619:2010 DRIERS FOR PAINTS AND VARNISHES
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
ISO 29803:2010 Thermal insulation products for building applications Determination of the resistance to impact of external thermal insulation composite systems (ETICS)
AEP-63 : 2009 PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS
15/30327125 DC : 0 BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
DIN EN ISO 4619:2011-02 DRIERS FOR PAINTS AND VARNISHES
PREN 1504-3 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
I.S. EN 4476:2011 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
ISO 3233-1:2013 Paints and varnishes Determination of the percentage volume of non-volatile matter Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry film density by the Archimedes principle
ISO 124:2014 Latex, rubber — Determination of total solids content
ASTM D 7143 : 2017 : REDLINE Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products
ONORM EN ISO 3233-2 : 2014 PAINTS AND VARNISHES - DETERMINATION OF THE PERCENTAGE VOLUME OF NON-VOLATILE MATTER - PART 2: METHOD USING THE DETERMINATION OF NON-VOLATILE-MATTER CONTENT IN ACCORDANCE WITH ISO 3251 AND DETERMINATION OF DRY FILM DENSITY ON COATED TEST PANELS BY THE ARCHIMEDES PRINCIPLE (ISO 3233-2:2014)
UNI EN 4476 : 2012 AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT
ISO 18280:2010 Plastics Epoxy resins Test methods
ISO 16525-1:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 1: General test methods
DIN EN 1504-7:2015-09 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
DIN EN ISO 16000-11:2006-06 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006)
DIN EN ISO 6504-3:2007-05 PAINTS AND VARNISHES - DETERMINATION OF HIDING POWER - PART 3: DETERMINATION OF CONTRAST RATIO OF LIGHT-COLOURED PAINTS AT A FIXED SPREADING RATE
DIN EN 1504-5:2013-06 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
BS EN ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders). Determination of partial acid value and total acid value
BS EN ISO 11908:1998 Binders for paints and varnishes. Amino resins. General methods of test
BS EN ISO 16000-11:2006 Indoor air Determination of the emission of volatile organic compounds from building products and furnishing. Sampling, storage of samples and preparation of test specimens
BS EN 2434-005 : 2006 AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION
ISO 7143:2007 Binders for paints and varnishes — Methods of test for characterizing water-based binders
EN 10301:2003 Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas
DIN EN ISO 6744-1:2004-09 Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999)
DIN EN 14879-3:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 12068:1998 Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
DIN EN ISO 15880:2004-09 Paints, varnishes and binders - Determination of MEQ value of water-based coating materials and binders (ISO 15880:2000)
DIN EN 10339:2007-05 Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection

ISO 124:2014 Latex, rubber — Determination of total solids content
ISO 23811:2009 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading rate
ISO 3233:1998 Paints and varnishes Determination of percentage volume of non-volatile matter by measuring the density of a dried coating
ISO 15528:2013 Paints, varnishes and raw materials for paints and varnishes Sampling
ISO 4618:2014 Paints and varnishes — Terms and definitions
ISO 1513:2010 Paints and varnishes Examination and preparation of test samples
ISO 123:2001 Rubber latex Sampling
ISO 2431:2011 Paints and varnishes Determination of flow time by use of flow cups

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.