• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3274:1996

Current
Current

The latest, up-to-date edition.

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

05-12-1996

Describes profiles and the general structure of contact (stylus) instruments for measuring surface roughness and waviness. Specifies the properties of the instrument which influence profile evaluation. Replaces the first edition of ISO 3274:1975 and ISO 1880:1979.

Committee
ISO/TC 213
DevelopmentNote
Supersedes ISO 1880 (04/2001)
DocumentType
Standard
Pages
13
PublisherName
International Organization for Standardization
Status
Current
Supersedes

I.S. EN ISO 25178-3:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS (ISO 25178-3:2012)
DIN EN ISO 16610-41:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
BS 6741-2:1987 Glossary of surface roughness terms Measurement of surface roughness parameters
DIN EN ISO 16610-1 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
I.S. EN ISO 16610-28:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS
ISO/TS 17450-2:2002 Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties
11/30216118 DC : 0 BS EN ISO 1797-3 - DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS
BS ISO 12301:2007 Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics
17/30309711 DC : 0 BS EN ISO 13473-1 - CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
02/712417 DC : DRAFT OCT 2002 PREN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
11/30199166 DC : 0 BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS
DIN EN ISO 1797:2016-05 (Draft) DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
BS EN ISO 25178-701:2010 Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments
13/30286407 DC : 0 BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
BS EN ISO 25178-604:2013 Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments
DD ISO/TS 16610-32:2009 Geometrical product specifications (GPS). Filtration Robust profile filters. Spline filters
BS EN ISO 12780-2:2011 Geometrical product specifications (GPS). Straightness Specification operators
BS 6836(1987) : AMD 7527 SPECIFICATION FOR CENTRIFUGAL PUMPS: CLASS II
11/30243507 DC : 0 BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
I.S. EN ISO 16610-49:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015)
05/30109548 DC : DRAFT JAN 2005 ISO 14880-4 - MICROLENS ARRAYS - PART 4: TEST METHODS FOR NON-OPTICAL PROPERTIES
06/30145675 DC : DRAFT SEP 2006 ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS
BS ISO 19674:2017 Fine ceramics (advanced ceramics, advanced technical ceramics). Methods of test for ceramic coatings. Determination of internal stress in ceramic coatings by application of the Stoney formula
PREN ISO 12780-2 : DRAFT 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
DIN EN ISO 16610-49:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015)
UNI EN ISO 12780-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
09/30209365 DC : DRAFT NOV 2009 BS EN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
BS EN 1504-10:2017 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works
DD CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS). Straightness Specification operators
BS EN ISO 25178-3:2012 Geometrical product specifications (GPS). Surface texture: Areal Specification operators
DIN EN ISO 17450-2:2013-04 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
BS EN 50526-1:2012 Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters
06/30159593 DC : 0 BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS ISO 12085 : 96 AMD 9951 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
DD ISO/TS 16610-41:2006 Geometrical product specifications (GPS). Filtration Morphological profile filters. Disk and horizontal line-segment filters
BS EN 62047-26:2016 Semiconductor devices. Micro-electromechanical devices Description and measurement methods for micro trench and needle structures
15/30324532 DC : 0 BS ISO 20808 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF MONOLITHIC CERAMICS BY BALL-ON-DISC METHOD
I.S. EN ISO 25178-70:2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
DIN EN ISO 25178-701:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
I.S. EN ISO 18452:2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005)
DD ISO/TS 16610-49:2006 Geometrical product specifications (GPS). Filtration Morphological profile filters. Scale space techniques
DD ISO/TS 10993-19:2006 Biological evaluation of medical devices Physico-chemical, morphological and topographical characterization of materials
ANSI INCITS 322 : 2015 INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS
UNE-EN ISO 17450-2:2015 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
BS 6828-1:1987 Dental rotary instruments Specification for shanks
UNE-EN ISO 25178-602:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
INCITS/ISO/IEC 15457-3 : 2002 : R2007 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO 23519:2010 Sintered metal materials, excluding hardmetals Measurement of surface roughness
CEI EN 50526-1 : 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
AWS C4.6M : 2006 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
I.S. EN 16282-2:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 2: KITCHEN VENTILATION HOODS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN ISO 1797:2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
UNI EN ISO 25178-3 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 3: SPECIFICATION OPERATORS
UNE-EN 60099-4:2016 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
UNI EN ISO 25178-6 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
I.S. EN ISO 1797-3:2013 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013)
BIS IS 15311-1 : 2003 AMD 1 DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS
UNI EN ISO 17450-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES
I.S. EN ISO 4287:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
EN ISO 4287:1998/A1:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
ISO 7986:1997 Hydraulic fluid power — Sealing devices — Standard test methods to assess the performance of seals used in oil hydraulic reciprocating applications
DIN EN 13231-3 E : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
BS EN ISO 1302:2002 Geometrical product specifications (GPS). Indication of surface texture in technical product documentation
BS EN ISO 14880-4:2006 Optics and photonics. Microlens arrays Test methods for geometrical properties
BS EN 1974 : 1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO 25178-701:2010 Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments
BS EN ISO 4288:1998 Geometric product specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
BS EN 623-4:2004 Advanced technical ceramics. Monolithic ceramics. General and textural properties Determination of surface roughness
BS EN ISO 12085 : 1998 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: PROFILE METHOD - MOTIF PARAMETERS
BS EN ISO 1797-2:1995 Dental rotary instruments. Shanks Shanks made of plastics
BS EN ISO 5436-1:2001 Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards
IEC 62047-26:2016 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
EN 1974:1998+A1:2009 Food processing machinery - Slicing machines - Safety and hygiene requirements
EN 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
EN ISO 12780-2:2011 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
CEN ISO/TS 12181-2:2007 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO/TS 12181-2:2003)
EN 13231-4:2013 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
CEN/TS 1071-11 : 2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA
EN ISO 12179:2000/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
EN 13231-3:2012 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
EN ISO 18452 : 2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005)
I.S. EN ISO 1302:2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION
EN 1071-1 : 2003 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER
CEN ISO/TS 12780-2:2007 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO/TS 12780-2:2003)
EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
ONORM EN 13231-3 : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
EN 62047-26:2016 Semiconductor devices - Micro-electromechanical devices - Part 26: Description and measurement methods for micro trench and needle structures
BS 2634-1:1987 Roughness comparison specimens Specification for turned, ground, bored, milled, shaped and planed specimens
09/30200407 DC : 0 BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
DIN EN ISO 25178-3:2012-11 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012); German version EN ISO 25178-3:2012
13/30273328 DC : 0 BS ISO 16610-32 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 32: ROBUST PROFILE FILTERS: SPLINE FILTERS
DD ISO/TS 16610-1:2006 Geometrical product specifications (GPS). Filtration Overview and basic concepts
BS ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles Terminology and basic requirements related to pavement texture profile analysis
BS EN ISO 17509:2016 Dentistry. Torque transmitter for handpieces
BS ISO 18535:2016 Diamond-like carbon films. Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
15/30299406 DC : 0 BS EN ISO 16610-28 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 28: PROFILE FILTERS: END EFFECTS
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
UNI EN ISO 12181-2 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
12/30258949 DC : 0 BS ISO 16610-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS
BS ISO 10110-8:2010 Optics and photonics. Preparation of drawings for optical elements and systems Surface texture; roughness and waviness
15/30299409 DC : 0 BS EN ISO 16610-31 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS
CSA ISO/IEC 15457-3 : 2009 : R2014 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS EN ISO 17450-2:2012 Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities
BS EN ISO 18452:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of thickness of ceramic films by contact-probe profilometer
I.S. EN IEC 60099-8:2018 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
BS EN 50526-2:2014 Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices
04/104967 DC : DRAFT APR 2004 ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS
PREN 10049 : DRAFT 2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
12/30258967 DC : 0 BS ISO 16610-49 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES
UNI EN ISO 25178-701 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
DD CEN ISO/TS 12181-2 : DRAFT 2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
09/30185454 DC : 0 BS ISO 10110-8 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 8: SURFACE TEXTURE
CAN/CSA-ISO/IEC 10373-2:16 Identification cards - Test methods - Part 2: Cards with magnetic stripes (Adopted ISO/IEC 10373-2:2015, third edition, 2015-01-15)
S.R. CEN ISO TS 12181-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
EN IEC 60099-8:2018 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
UNE-EN ISO 12181-2:2012 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
I.S. EN ISO 12181-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
I.S. EN 13231-4:2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
I.S. EN ISO 13473-1:2004 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
ISO 10766:2014 Hydraulic fluid power Cylinders Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
PREN 1974 : DRAFT 2016 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
ISO/TS 16610-49:2006 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques
UNE-EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009)
UNE-EN 16282-4:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 4: Air inlets and outlets; Design and safety requirements
CEI EN 60099-4 : 2015 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
ASTM F 2791 : 2015 : REDLINE Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
I.S. EN 60099-4:2014 SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS
I.S. EN ISO 12085:1998 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
IEC 60099-8 REDLINE : 2ED 2017 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
DIN EN 1974:2016-06 (Draft) Food processing machinery - Slicing machines - Safety and hygiene requirements; German and English version prEN 1974:2016
BS EN 10049:2013 Measurement of roughness average <i>Ra</i> and peak count <i>RPc</i> on metallic flat products
ISO 25178-70:2014 Geometrical product specification (GPS) Surface texture: Areal Part 70: Material measures
BS EN ISO 8503-4:1995 Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
BS EN ISO 5436-2:2012 Geometrical product specifications (GPS). Surface texture: Profile method; Measurement standards Software measurement standards
BS EN ISO 4287 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
I.S. EN ISO 9013:2017 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
I.S. EN 10049:2013 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
DIN EN 1974:2010-05 Food processing machinery - Slicing machines - Safety and hygiene requirements (includes Amendment A1:2009)
UNI EN 1974 : 2009 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 8503-4:2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012)
I.S. EN ISO 5436-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
I.S. EN 13231-3:2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
I.S. EN 1974:1998 FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
BS 1134-1:1988 Assessment of surface texture Methods and instrumentation
VDI/VDE 2655 Blatt 1.2:2010-10 Optical measurement of microtopography - Calibration of confocal microscopes and depth setting standards for roughness measurement
VDI 3414 Blatt 2:2014-02 (Draft) Quality evaluation of wooden surfaces - Testing and measuring methods
VDI/VDE 2655 Blatt 1.1:2008-03 Optical measurement and microtopographies - Calibration of interference microscopes and depth measurement standards for roughness measurement
VDI 3405 Blatt 1:2013-10 Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control
VDI 3414 Blatt 3:2014-02 (Draft) Quality evaluation of wooden surfaces - Milled, sawn, planed, drilled and turned surfaces.
BS 6393:1987 Specification for calibration of stylus instruments
VDI/VDE 2656 Blatt 1:2008-06 Determination of geometrical quantities by using of Scanning Probe Microscopes - Calibration of measurement systems
VDI/VDE 2612 Blatt 5:2015-02 Measurement and testing of gearings - Surface roughness measurement of cylindrical gears and bevel gears by means of stylus-type instruments
ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
BS 2634-2:1987 Roughness comparison specimens Specification for spark-eroded, shot-blasted, grit-blasted, and polished specimens
VDI/VDE 2602 Blatt 4:2014-09 Surface measurement - Roughness measurement using contact (stylus) instruments - Calibration, uncertainty of measurement
DIN EN ISO 25178-601:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
UNI EN ISO 25178-604 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS
BS EN 13231-4:2013 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in switches and crossings
07/30170832 DC : DRAFT AUG 2007 BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
17/30356577 DC : 0 BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
I.S. EN ISO 5199:2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
I.S. EN ISO 1797-1:2011 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS
13/30269784 DC : 0 BS ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
DIN EN ISO 1797 E : 2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
PREN 1504-10 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNE-EN ISO 25178-3:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
UNE-EN ISO 17509:2017 Dentistry - Torque transmitter for handpieces (ISO 17509:2016)
ISO 13473-2:2002 Characterization of pavement texture by use of surface profiles — Part 2: Terminology and basic requirements related to pavement texture profile analysis
BS EN ISO 25178-606:2015 Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments
16/30337802 DC : 0 BS EN 1974 - FOOD PROCESSING MACHINERY - SLICING MACHINES - SAFETY AND HYGIENE REQUIREMENTS
09/30193829 DC : 0 BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS
BS EN 16282-4:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Air inlets and outlets; design and safety requirements
15/30327977 DC : 0 BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNE-EN ISO 1797-3:2013 Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013)
04/30125826 DC : DRAFT NOV 2004 ISO 18452 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER
UNI EN ISO 25178-601 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS EN ISO 25178-602:2010 Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments
BS EN 60099-8:2011 Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
DD ISO/TS 16610-31:2010 Geometrical product specifications (GPS). Filtration Robust profile filters. Gaussian regression filters
DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
15/30279088 DC : 0 BS ISO 18535 - DIAMOND-LIKE CARBON FILMS - DETERMINATION OF FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON FILMS BY BALL-ON-DISC METHOD
DIN 4762:1989-01 SURFACE ROUGHNESS; TERMINOLOGY; SURFACE & ITS PARAMETERS
UNE-EN 16282-2:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 2: Kitchen ventilation hoods; design and safety requirements
DIN EN ISO 1797-3:2013-06 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013)
I.S. CEN/TS 1071-11:2005 ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA
14/30281833 DC : 0 BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION
BS ISO/IEC 15457-3:2008 Identification cards. Thin flexible cards Test methods
09/30198179 DC : 0 BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
UNI EN ISO 25178-602 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
NF EN ISO 25178-602 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
BS EN 16282-8:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Installations for treatment of aerosol. Requirements and testing
DIN EN ISO 18452 E : 2016 FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF THICKNESS OF CERAMIC FILMS BY CONTACT-PROBE PROFILOMETER (ISO 18452:2005)
13/30275599 DC : 0 BS EN 10049 - MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
ANSI/AAMI/ISO TIR10993-19:2006 BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 19: PHYSICOCHEMICAL, MORPHOLOGICAL, AND TOPOGRAPHICAL CHARACTERIZATION OF MATERIALS
09/30198155 DC : DRAFT MAY 2009 BS EN ISO 12181-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ROUNDNESS - PART 2: SPECIFICATION OPERATORS
BS 7780-2:1994 Specification for rotary shaft lip type seals Vocabulary
17/30333744 DC : 0 BS EN ISO 25178-600 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 600: METROLOGICAL CHARACTERISTICS FOR AREAL-TOPOGRAPHY MEASURING METHODS
I.S. EN ISO 17450-2:2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012)
BS EN ISO 25178-70:2014 Geometrical product specification (GPS). Surface texture: Areal Material measures
UNI EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES
IEC 60099-8:2017 Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
PREN 50526-1 : DRAFT 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
BS EN ISO 13473-1:2004 Characterization of pavement texture by use of surface profiles Determination of mean profile depth
DIN EN ISO 13473-1:2004-07 Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:1997)
UNE-EN 16282-3:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 3: Kitchen ventilation ceilings; Design and safety requirements
I.S. EN 16282-3:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 3: KITCHEN VENTILATION CEILINGS - DESIGN AND SAFETY REQUIREMENTS
ISO 5597:2010 Hydraulic fluid power Cylinders Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
EN ISO 1797 : 2017 DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017)
ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
DIN EN ISO 9013 E : 2003 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
DIN EN 623-4:2005-01 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness; German version EN 623-4:2004
DIN EN ISO 4288:1998-04 GPS - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
DIN EN ISO 13565-1:1998-04 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Surfaces having stratified functional properties - Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997
DIN EN ISO 4287:2010-07 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd 1:2009)
DIN EN ISO 9013:2003-07 THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017)
UNE-EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
BS EN ISO 9905 : 1998 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
BS EN ISO 14923:2003 Thermal spraying. Characterization and testing of thermally sprayed coatings
ISO 1302:2002 Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation
IEC 62217:2012 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
UNE-EN ISO 1797-1:2012 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011)
EN ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
EN ISO 14923:2003 Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)
UNI EN 13231-3 : 2012 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF REPROFILING RAILS IN TRACK
UNI EN ISO 8503-4 : 2012 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE
UNI EN 1504-10 : 2005 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN ISO 9905 : 2011 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 1
UNI EN 10049 : 2014 MEASUREMENT OF ROUGHNESS AVERAGE RA AND PEAK COUNT RPC ON METALLIC FLAT PRODUCTS
UNI EN ISO 1797-1 : 2011 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS
UNI EN ISO 5436-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS
ONORM EN ISO 12179 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
UNI EN ISO 15783 : 2009 Seal-less rotodynamic pumps - Class II - Specification
UNI EN ISO 4287 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS
UNE-EN ISO 12780-2:2012 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
UNE-EN 13231-4:2014 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
DIN ISO 10110-8:2012-02 Optics and photonics - Preparation of drawings for optical elements and systems - Part 8: Surface texture; roughness and waviness (ISO 10110-8:2010)
DIN ISO 23519 E : 2015 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010)
16/30316140 DC : 0 BS ISO 19674 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS OF TEST FOR CERAMIC COATINGS - DETERMINATION OF INTERNAL STRESS IN CERAMIC COATINGS BY APPLICATION OF THE STONEY FORMULA
I.S. CEN ISO TS 12780-2:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
BS EN ISO 12181-2:2011 Geometrical product specifications (GPS). Roundness Specification operators
I.S. EN 16282-8:2017 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 8: INSTALLATIONS FOR TREATMENT OF AEROSOL - REQUIREMENTS AND TESTING
14/30261577 DC : 0 BS EN ISO 9013 - THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES
18/30372409 DC : DRAFT APR 2018 BS EN ISO 3630-1 - DENTISTRY - ENDODONTIC INSTRUMENTS - PART 1: GENERAL REQUIREMENTS
13/30251855 DC : 0 BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS
ISO 11952:2014 Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems
I.S. EN ISO 25178-701:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
BS ISO 5597:2010 Hydraulic fluid power. Cylinders. Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications
03/104329 DC : DRAFT FEB 2003 PREN ISO 8325 - DENTISTRY - TEST METHODS FOR ROTARY INSTRUMENTS
02/207432 DC : DRAFT JUN 2002 IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS
I.S. EN 623-4:2004 ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - PART 4: DETERMINATION OF SURFACE ROUGHNESS
I.S. EN ISO 8325:2004 DENTISTRY - TEST METHODS FOR ROTARY INSTRUMENTS
DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
BS ISO/IEC 10373-2:2015 Identification cards. Test methods Cards with magnetic stripes
DIN EN ISO 12780-2:2011-07 Geometrical product specifications (GPS) - Straightness - Part 2: Specification operators (ISO 12780-2:2011)
BS ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles Specification and classification of profilometers
BS EN ISO 16610-41:2015 Geometrical product specifications (GPS). Filtration Morphological profile filters: Disk and horizontal line-segment filters
DIN 13950-1:1990-05 DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS
BS EN 16282-3:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation ceilings; design and safety requirements
BS ISO 10766:2014 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
BS ISO/TR 10064-4:1998 Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking
07/30154358 DC : DRAFT AUG 2007 DD ISO/TS 25178-6 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: ARIAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
BS EN ISO 16610-28:2016 Geometrical product specifications (GPS). Filtration Profile filters: End effects
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
BS 7784(1994) : 1994 AMD 9864 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS I
11/30205376 DC : 0 BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS
00/715013 DC : DRAFT OCT 2000 PREN 13231-3 - RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 3: ACCEPTANCE OF RAIL GRINDING, MILLING AND PLANING WORK IN TRACK
I.S. EN ISO 16610-1:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
BS ISO 13565-1 : 1996 AMD 9949 GEOMETRIC PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - FILTERING AND GENERAL MEASUREMENT CONDITIONS
BS EN ISO 16610-49:2015 Geometrical product specifications (GPS). Filtration Morphological profile filters: Scale space techniques
DIN EN ISO 16610-31 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
BS 7079-C4(1989) : 1989 AMD 8654 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS & RELATED PRODUCTS - METHOD FOR THE CALIBRATION DETERMINATION OF SURFACE PROFILE USING A STYLUS INSTRUMENT
12/30258964 DC : 0 BS ISO 16610-41 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS
DD ISO/TS 17450-2:2002 Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties
BS ISO 20808:2016 Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method
BS EN 16282-2:2016 Equipment for commercial kitchens. Components for ventilation in commercial kitchens Kitchen ventilation hoods; design and safety requirements
09/30198161 DC : 0 BS EN ISO 12780-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
NF EN ISO 25178-701 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
ISO/TS 16610-1:2006 Geometrical product specifications (GPS) Filtration Part 1: Overview and basic concepts
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
UNI EN ISO 1797-3 : 2013 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS
DD CEN/TS 1071-11:2005 Advanced technical ceramics. Methods of test for ceramic coatings Determination of internal stress by the Stoney formula
ISO/TS 16610-28:2010 Geometrical product specifications (GPS) Filtration Part 28: Profile filters: End effects
AWS C4.6M:2006(R2012) THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
BS ISO 4287:1997 Geometric product specifications (GPS). Surface texture: profile method. Terms, definitions and surface texture parameters
PREN 4400-2 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP
INCITS/ISO/IEC 15457-3 : 2002 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
UNE-EN ISO 25178-601:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
I.S. EN 61189-2:2006 TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
I.S. EN 60099-8:2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
I.S. EN ISO 16610-31:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
I.S. EN 16282-4:2016 EQUIPMENT FOR COMMERCIAL KITCHENS - COMPONENTS FOR VENTILATION IN COMMERCIAL KITCHENS - PART 4: AIR INLETS AND OUTLETS - DESIGN AND SAFETY REQUIREMENTS
I.S. EN ISO 25178-604:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
I.S. EN 50526-1:2012 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS
ISO 13473-3:2002 Characterization of pavement texture by use of surface profiles — Part 3: Specification and classification of profilometers
IEC 62848-1:2016 Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps
ISO 16311-4:2014 Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention
EN 1504-10:2017 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works
ISO/TS 10993-19:2006 Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials
I.S. EN ISO 12780-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - STRAIGHTNESS - PART 2: SPECIFICATION OPERATORS
ISO/IEC 15457-3:2008 Identification cards — Thin flexible cards — Part 3: Test methods
DIN EN ISO 1797-1:2011-11 DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011)
DIN EN 10049:2014-03 Measurement of roughness average Ra and peak count RPc on metallic flat products
ISO/TS 12181-2:2003 Geometrical Product Specifications (GPS) Roundness Part 2: Specification operators
BS EN ISO 9013:2017 Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances
ISO 16610-1:2015 Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts
ISO 5436-2:2012 Geometrical product specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 2: Software measurement standards
BS EN ISO 13565-2:1998 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the linear material ration curve
ISO 15783:2002 Seal-less rotodynamic pumps — Class II — Specification
ISO 1797-3:2013 Dentistry Shanks for rotary instruments Part 3: Shanks made of ceramics
UNE-EN 13231-3:2013 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
UNE-EN 50526-2:2014 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
ISO 25178-3:2012 Geometrical product specifications (GPS) — Surface texture: Areal — Part 3: Specification operators
ISO 17450-2:2012 Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities
ISO 8325:2004 Dentistry — Test methods for rotary instruments
ISO 1797-1:2011 Dentistry Shanks for rotary instruments Part 1: Shanks made of metals
IEC 60099-4:2014 Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems
ISO 14923:2003 Thermal spraying Characterization and testing of thermally sprayed coatings
ISO 18452:2005 Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of thickness of ceramic films by contact-probe profilometer
ISO 25178-604:2013 Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments
ISO 5199:2002 Technical specifications for centrifugal pumps — Class II
BS EN ISO 13565-1:1998 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Filtering and general measurement conditions
ISO/TS 12780-2:2003 Geometrical Product Specifications (GPS) Straightness Part 2: Specification operators
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 16610-28:2016 Geometrical product specifications (GPS) — Filtration — Part 28: Profile filters: End effects
ISO 9013:2017 Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances
ISO 5436-1:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method; Measurement standards Part 1: Material measures
ISO 16610-49:2015 Geometrical product specifications (GPS) Filtration Part 49: Morphological profile filters: Scale space techniques
ISO 25178-6:2010 Geometrical product specifications (GPS) Surface texture: Areal Part 6: Classification of methods for measuring surface texture
ISO 9905:1994 Technical specifications for centrifugal pumps — Class I
ISO 1797-2:1992 Dental rotary instruments Shanks Part 2: Shanks made of plastics
IEC 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures
ISO 16610-41:2015 Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters
ISO 16610-31:2016 Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
UNE-EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
ISO 25178-602:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 25178-606:2015 Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments
ISO 12179:2000 Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments
ISO 4287:1997 Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters
EN ISO 16610-1:2015 Geometrical product specifications (GPS) - Filtration - Part 1: Overview and basic concepts (ISO 16610-1:2015)
EN ISO 25178-606:2015 Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015)
EN ISO 5436-2:2012 Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012)
EN ISO 16610-28:2016 Geometrical product specifications (GPS) - Filtration - Part 28: Profile filters: End effects (ISO 16610-28:2016)
I.S. EN ISO 12179:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS
I.S. EN ISO 13565-2:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
EN 623-4:2004 Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness
EN ISO 8503-4:2012 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
EN ISO 9905:1997/A1:2011 Technical specifications for centrifugal pumps - Class I - Amendment 1 (ISO 9905:1994/AMD 1:2011)
EN ISO 16610-49:2015 Geometrical product specifications (GPS) - Filtration - Part 49: Morphological profile filters: Scale space techniques (ISO 16610-49:2015)
EN ISO 9013:2017 Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017)
EN ISO 14880-4:2006 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006)
EN ISO 25178-602:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
EN ISO 5199 : 2002 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN ISO 25178-701:2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
EN ISO 25178-3:2012 Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012)
EN ISO 5436-1 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 1: MATERIAL MEASURES
EN ISO 8325:2004 Dentistry - Test methods for rotary instruments (ISO 8325:2004)
EN ISO 1797-3:2013 Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013)
EN ISO 25178-70 : 2014 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014)
EN ISO 15783:2003/A1:2008 Seal-less rotodynamic pumps - Class II - Specification - Amendment 1 (ISO 15783:2003/Amd 1:2008)
EN ISO 16610-41:2015 Geometrical product specifications (GPS) - Filtration - Part 41: Morphological profile filters: Disk and horizontal line-segment filters (ISO 16610-41:2015)
EN ISO 25178-601 : 2010 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010)
EN ISO 17450-2:2012 Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012)
EN 753-3 : 1999 IDENTIFICATION CARD SYSTEMS - INTERSECTION THIN FLEXIBLE CARDS - TEST METHODS
EN ISO 13565-1 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 1: FILTERING AND GENERAL MEASUREMENT CONDITIONS
EN ISO 17509:2016 Dentistry - Torque transmitter for handpieces (ISO 17509:2016)
EN ISO 16610-31:2016 Geometrical product specifications (GPS) - Filtration - Part 31: Robust profile filters: Gaussian regression filters (ISO 16610-31:2016)
EN ISO 25178-604:2013 Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013)
I.S. EN ISO 4288:1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
I.S. EN ISO 13565-3:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE -PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
EN ISO 1797-1:2011 Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011)
EN 16282-8:2017 Equipment for commercial kitchens - Components for ventilation in commercial kitchens - Part 8: Installations for treatment of aerosol; Requirements and testing
UNE-EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
ISO 18535:2016 Diamond-like carbon films Determination of friction and wear characteristics of diamond-like carbon films by ball-on-disc method
DIN EN ISO 25178-604:2013-12 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013)
DD ISO/TS 16610-28:2010 Geometrical product specifications (GPS). Filtration Profile filters. End effects
DIN EN ISO 18452:2016-09 Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of thickness of ceramic films by contact-probe profilometer (ISO 18452:2005)
DIN EN ISO 16610-41 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
BS ISO 23519:2010 Sintered metal materials, excluding hardmetals. Measurement of surface roughness
BS 2634-3:1980 Specification for roughness comparison specimens Cast surfaces
DIN ISO 23519:2015-12 SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS (ISO 23519:2010)
DIN EN ISO 16610-31:2015-09 (Draft) GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
DIN EN ISO 25178-602:2011-01 Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010)
11/30197571 DC : 0 BS ISO 25832-1 - IMPLANTS FOR SURGERY - SEAMLESS TUBES FOR SURGICAL IMPLANTS - PART 1: MATERIALS BASED ON IRON
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
05/30127945 DC : DRAFT JAN 2005 ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES
DIN EN ISO 12181-2:2011-07 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
11/30243837 DC : 0 BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
ISO/TS 16610-41:2006 Geometrical product specifications (GPS) Filtration Part 41: Morphological profile filters: Disk and horizontal line-segment filters
BS EN ISO 16610-1:2015 Geometrical product specifications (GPS). Filtration Overview and basic concepts
DIN EN ISO 16610-49 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 49: MORPHOLOGICAL PROFILE FILTERS: SCALE SPACE TECHNIQUES (ISO 16610-49:2015)
07/30170829 DC : DRAFT AUG 2007 BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
BS EN ISO 16610-31:2016 Geometrical product specifications (GPS). Filtration Robust profile filters: Gaussian regression filters
DIN EN ISO 25178-6:2010-06 Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO 25178-6:2010)
14/30294910 DC : 0 BS EN 62047-26 ED1.0 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES
08/30171709 DC : DRAFT JAN 2008 BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS
ISO 13473-1:1997 Characterization of pavement texture by use of surface profiles Part 1: Determination of Mean Profile Depth
DIN EN ISO 16610-1:2015-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 1: OVERVIEW AND BASIC CONCEPTS (ISO 16610-1:2015)
BS EN ISO 25178-601:2010 Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments
BS EN ISO 1797-3:2013 Dentistry. Shanks for rotary instruments Shanks made of ceramics
I.S. EN ISO 16610-41:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 41: MORPHOLOGICAL PROFILE FILTERS: DISK AND HORIZONTAL LINE-SEGMENT FILTERS (ISO 16610-41:2015)
15/30291323 DC : 0 BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS
BS EN ISO 25178-6:2010 Geometrical product specifications (GPS). Surface texture. Areal Classification of methods for measuring surface texture
NF ISO 5597 : 2010 HYDRAULIC FLUID POWER - CYLINDERS - DIMENSIONS AND TOLERANCES OF HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS
BS ISO 6123-2:2015 Rubber or plastics covered rollers. Specifications Surface characteristics
BS ISO 4288 : 96 AMD 9918 GEOMETRIC PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD: RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
BS EN ISO 1797:2017 Dentistry. Shanks for rotary and oscillating instruments
08/30176943 DC : 0 BS ISO 23519 - SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - MEASUREMENT OF SURFACE ROUGHNESS
08/30174605 DC : DRAFT SEP 2008 BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES
01/648266 DC : DRAFT MAY 2001 ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO 12301:2007 Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics
NF EN 60099-8 : 2011 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
CSA ISO/IEC 15457-3 : 2009 IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
I.S. EN 62047-26:2016 SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 26: DESCRIPTION AND MEASUREMENT METHODS FOR MICRO TRENCH AND NEEDLE STRUCTURES
DIN EN 13231-4:2013-06 Railway applications - Track - Acceptance of works - Part 4: Acceptance of reprofiling rails in switches and crossings
ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments
PREN 4400-3 : 200P1 AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION
ISO/TS 16610-32:2009 Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters
ISO 19674:2017 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for ceramic coatings — Determination of internal stress in ceramic coatings by application of the Stoney formula
I.S. EN ISO 25178-606:2015 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015)
I.S. EN 50526-2:2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
CEI EN 50526-2 : 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES
ISO 6123-2:2015 Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics
BS EN 60099-4:2014 Surge arresters Metal-oxide surge arresters without gaps for a.c. systems
UNE-EN ISO 25178-701:2011 Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010)
UNI EN 13231-4 : 2013 RAILWAY APPLICATIONS - TRACK - ACCEPTANCE OF WORKS - PART 4: ACCEPTANCE OF REPROFILING RAILS IN SWITCHES AND CROSSINGS
ISO/IEC 10373-2:2015 Identification cards Test methods Part 2: Cards with magnetic stripes
EN ISO 13473-1 : 2004 CHARACTERIZATION OF PAVEMENT TEXTURE BY USE OF SURFACE PROFILES - PART 1: DETERMINATION OF MEAN PROFILE DEPTH
CEI EN 60099-8 : 2012 SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV
NF EN ISO 25178-601 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
ISO 10110-8:2010 Optics and photonics Preparation of drawings for optical elements and systems Part 8: Surface texture; roughness and waviness
ISO/TR 10064-4:1998 Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking
I.S. EN ISO 25178-601:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS
ISO/TS 16610-31:2010 Geometrical product specifications (GPS) Filtration Part 31: Robust profile filters: Gaussian regression filters
I.S. EN 1504-10:2017 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
I.S. EN ISO 25178-602:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS
I.S. EN ISO 25178-6:2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 6: CLASSIFICATION OF METHODS FOR MEASURING SURFACE TEXTURE
DIN EN ISO 8503-4:2012-06 Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012)
ISO 17509:2016 Dentistry Torque transmitter for handpieces
ISO 12181-2:2011 Geometrical product specifications (GPS) Roundness Part 2: Specification operators
ISO 25178-601:2010 Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments
BS EN ISO 15783 : 2003 SEAL-LESS ROTODYNAMIC PUMPS - CLASS 2 - SPECIFICATION
BS EN 1071-1:2003 Advanced technical ceramics. Methods of test for ceramic coatings Determination of coating thickness by contact probe filometer
BS EN ISO 5199:2002 Technical specifications for centrifugal pumps. Class II
BS EN ISO 1797-1:2011 Dentistry. Shanks for rotary instruments Shanks made of metals
BS EN 13231-3:2012 Railway applications. Track. Acceptance of works Acceptance of reprofiling rails in track
BS EN ISO 12179:2001 Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments
BS EN 753-3:1999 Identification card systems. Intersector thin flexible cards Test methods
ISO 12780-2:2011 Geometrical product specifications (GPS) Straightness Part 2: Specification operators
BS EN ISO 13565-3:2000 Geometric product specifications (GPS). Surface texture: Profile method. Surfaces having stratified functional properties Height characterization using the material probability curve
BS EN 61189-2:2006 Test methods for electrical materials, printed boards and other interconnection structures and assemblies Test methods for materials for interconnection structures
BS EN ISO 8325:2004 Dentistry. Test methods for rotary instruments
ISO 14880-4:2006 Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
DIN EN ISO 5199:2003-12 TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS 2
EN ISO 12085:1997/AC:2008 GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE - PROFILE METHOD - MOTIF PARAMETERS
EN ISO 13565-3 : 2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - PROFILE METHOD - SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 3: HEIGHT CHARACTERIZATION USING THE MATERIAL PROBABILITY CURVE
DIN EN 13231-3:2012-04 Railway applications - Track - Acceptance of works - Part 3: Acceptance of reprofiling rails in track
EN 10049:2013 Measurement of roughness average Ra and peak count RPc on metallic flat products
DIN EN ISO 5436-2:2013-04 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; MEASUREMENT STANDARDS - PART 2: SOFTWARE MEASUREMENT STANDARDS (ISO 5436-2:2012)
DIN EN ISO 14923:2003-10 THERMAL SPRAYING - CHARACTERIZATION AND TESTING OF THERMALLY SPRAYED COATINGS
EN ISO 12181-2 : 2011 Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011)
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN ISO 1302 : 2002 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF SURFACE TEXTURE IN TECHNICAL PRODUCT DOCUMENTATION (ISO 1302:2002)
EN 50526-1:2012 Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
EN ISO 13565-2 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD; SURFACES HAVING STRATIFIED FUNCTIONAL PROPERTIES - PART 2: HEIGHT CHARACTERIZATION USING THE LINEAR MATERIAL RATIO
IEC 60099-8:2017 RLV Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV
DIN EN ISO 14880-4:2006-08 Optics and photonics - Microlens arrays - Part 4: Test methods for geometrical properties (ISO 14880-4:2006)
DIN EN ISO 16610-31:2017-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FILTRATION - PART 31: ROBUST PROFILE FILTERS: GAUSSIAN REGRESSION FILTERS (ISO 16610-31:2016)
DIN EN ISO 8325:2004-12 Dentistry - Test methods for rotary instruments (ISO 8325:2004)
DIN EN ISO 15783:2010-04 Seal-less rotodynamic pumps - Class II - Specification (ISO 15783:2002 + Amd.1:2008) (includes Amendment A1:2008)

ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
EN ISO 4288 : 1997 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE
ISO 5436:1985 Calibration specimens Stylus instruments Types, calibration and use of specimens
ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
ISO 4287-1:1984 Surface roughness — Terminology — Part 1: Surface and its parameters

View more information
£88.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.