• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 3310-2:2013

Current
Current

The latest, up-to-date edition.

Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

13-08-2013

ISO 3310-2:2013 specifies the technical requirements and corresponding test methods for test sieves of perforated metal plate.

It applies to test sieves having round holes, with sizes from 125 mm down to 1 mm, or square holes, with sizes from 125 mm down to 4 mm, in accordance with ISO 565.

Committee
ISO/TC 24/SC 8
DevelopmentNote
Supersedes ISO/DIS 3310-2. (08/2013)
DocumentType
Standard
Pages
9
PublisherName
International Organization for Standardization
Status
Current
Supersedes

Standards Relationship
NF ISO 3310-2 : 2019 Identical
BS ISO 3310-2:2013 Identical
DIN ISO 3310-2:2015-07 Identical
SANS 3310-2:2015(R2020) Identical
SANS 3310-2 : 2ED 2015 Identical
PN ISO 3310-2 : 2000 Identical
BS 410:1986 Similar to
UNE 7050-4:1997 Identical
NF ISO 3310-2 : 1999 Identical
NEN ISO 3310-2 : 1999 Identical

PREN 932-5 : DRAFT 2009 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
DIN EN 15210-1:2010-04 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
DD CEN/TS 15415:2006 Solid recovered fuels. Determination of particle size and particle size distribution by screen method
BS EN 60079-5:2015 Explosive atmospheres Equipment protection by powder filling \'q\'
07/30111991 DC : 0 BS 8472 - PACKAGING - METHOD FOR THE DETERMINATION OF COMPOSTABILITY (INCLUDING BIODEGRADABILITY AND ECO-TOXICITY) OF PACKAGING MATERIALS BASED ON OXO-BIODEGRADABLE PLASTICS
13/30275450 DC : 0 BS EN ISO 17831-1 - SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
16/30303043 DC : DRAFT MAR 2016 BS EN ISO 19743 - SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGE THAN 3,15 MM
BS EN 15415-2:2012 Solid recovered fuels. Determination of particle size distribution Maximum projected length method (manual) for large dimension particles
07/30147937 DC : 0 BS ISO 4701 - IRON ORES AND DIRECT REDUCED IRON - DETERMINATION OF SIZE DISTRIBUTION BY SIEVING
DIN EN ISO 19743 E : 2017 SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGER THAN 3,15 MM (ISO 19743:2017)
15/30286347 DC : 0 BS EN ISO 18846 - SOLID BIOFUELS - DETERMINATION OF FINES CONTENT IN QUANTITIES OF PELLETS
12/30267444 DC : 0 BS EN 60079-5 ED 4.0 - EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
BS 7755-5.4:1998 Soil quality. Physical methods Method by sieving and sedimentation
I.S. EN 15149-1:2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
13/30265121 DC : 0 BS ISO 13930 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY DYNAMIC METHOD
05/30132135 DC : DRAFT APR 2005 ISO 4696-2 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 2: REDUCTION WITH CO AND N[2]
13/30265109 DC : 0 BS ISO 4696-1 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 1: REDUCTION WITH CO, CO[2], H[2] AND N[2]
DIN EN ISO 5223 E : 2016 TEST SIEVES FOR CEREALS (ISO 5223:1995, INCLUDING AMENDMENT 1:1999)
DD CEN/TS 15210-1:2005 Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes Pellets
13/30258710 DC : 0 BS 1881-124 - TESTING CONCRETE - PART 124: METHODS FOR ANALYSIS OF HARDENED CONCRETE
UNE-EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
15/30275869 DC : 0 BS EN ISO 17827-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE
BS 6043-2.9:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode coke - Determination of particle size distribution
S.R. CEN/TS 15639:2010 SOLID RECOVERED FUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS
BS EN 15210-1:2009 Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets
BS EN ISO 17831-1:2015 Solid biofuels. Determination of mechanical durability of pellets and briquettes Pellets
DIN 4924 E : 1998 SANDS AND GRAVELS FOR WELL CONSTRUCTION - REQUIREMENTS AND TESTING
UNE-EN 12350-11:2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
05/30063596 DC : DRAFT JULY 2005 EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT IMPACT ON SOIL PH - SOIL INCUBATION METHOD
PREN 12948 : DRAFT 2009 LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING
DIN EN ISO 14688-2:2016-07 (Draft) GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION (ISO 14688-2:2004 + AMD 1:2013)
PREN 12697-18 : DRAFT 2015 BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE
I.S. EN 61394:2011 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS (IEC 61394:2011)
S.R. CEN/TR 15149-3:2014 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: ROTARY SCREEN METHOD
I.S. EN ISO 17827-1:2016 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016)
I.S. EN 16455:2014 CONSERVATION OF CULTURAL HERITAGE - EXTRACTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE
I.S. CEN TS 15210-1:2006 SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
PREN 14243-3 : DRAFT 2017 MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS
PREN 13383-2 : DRAFT 2017 ARMOURSTONE - PART 2: TEST METHODS
UNE-EN ISO 18846:2017 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
UNI 11531-1 : 2014 CONSTRUCTION AND MAINTENANCE FOR INFRASTRUCTURE CIVIL BUILDING - CRITERIA FOR MATERIALS USE - PART 1: SOILS AND MIXTURES OF UNBOUND AGGREGATES
DD CEN/TS 15639:2010 Solid recovered fuels. Determination of mechanical durability of pellets
UNE-EN 15415-1:2012 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
UNI EN 15149-2 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
UNE-EN ISO 17829:2016 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
ISO 11323:2010 Iron ore and direct reduced iron Vocabulary
EN 12697-1 : 2012 COR 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
DIN EN 12697-18:2015-12 (Draft) BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE
UNE-EN 772-5:2016 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units
CEN/TS 15210-1:2005 Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
EN 15149-1:2010 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
DIN EN 12697-1:2012-09 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
EN 15210-1:2009 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
CEN/TS 15149-2:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
CEN/TS 15149-3:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 3: Rotary screen method
CEN/TS 15639:2010 Solid recovered fuels - Determination of mechanical durability of pellets
EN 15149-2:2010 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
DIN EN 12697-18:2017-09 BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE
EN 15415-1:2011 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
CEN/TS 14243:2010 Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
CEN/TR 15149-3:2014 Solid biofuels - Determination of particle size distribution - Part 3: Rotary screen method
EN 13383-2:2013 Armourstone - Part 2: Test methods
CEN/TS 15149-1:2006 Solid biofuels - Methods for the determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 3,15 mm and above
EN 12697-2:2015 BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
EN 12697-18:2017 Bituminous mixtures - Test methods - Part 18: Binder drainage
UNI EN 16455 : 2014 CONSERVATION OF CULTURAL HERITAGE - DISSOLUTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE
S.R. CEN TS 15149-1:2006 SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND ABOVE
14/30295181 DC : 0 BS EN ISO 17892-4 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
BIS IS/ISO 15968 : 2000 DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI)
UNE-EN ISO 5223:2016 Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999)
DIN EN ISO 17892-4:2017-04 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 17892-4:2016)
10/30219012 DC : 0 BS EN 15415-1 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES
DIN EN ISO 17827-1:2016-10 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016)
ISO 8371:2015 Iron ores for blast furnace feedstocks — Determination of the decrepitation index
I.S. EN 15415-2:2012 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES
DIN 24043:1981-10 OBLONG HOHLE PERFORATED PLATES - DIMENSIONS
DIN EN ISO 17827-2:2016-10 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016)
05/30132752 DC : DRAFT APR 2005 ISO 15968 - DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI)
PREN 15415-3 : DRAFT 2010 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES
DIN EN 16455 E : 2014 CONSERVATION OF CULTURAL HERITAGE - EXTRACTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE
UNE-EN ISO 17831-1:2016 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
BS ISO 4701:2017 Iron ores and direct reduced iron. Determination of size distribution by sieving
18/30371125 DC : DRAFT APR 2018 BS EN ISO 8130-1 - COATING POWDERS - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SIEVING
BS ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks. Determination of the low-temperature reduction-disintegration index and degree of metallization
UNI EN ISO 14688-2 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: PRINCIPLES FOR A CLASSIFICATION
BS EN ISO 19743:2017 Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm
13/30265106 DC : 0 BS ISO 3271 - IRON ORES FOR BLAST FURNACE AND DIRECT REDUCTION FEEDSTOCKS - DETERMINATION OF THE TUMBLE AND ABRASION INDICES
BS EN 16455:2014 Conservation of cultural heritage. Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage
NF EN 12350-11 : 2010 TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST
BS EN 772-5:2016 Methods of test for masonry units Determination of the active soluble salts content of clay masonry units
BS EN ISO 17827-1:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels Oscillating screen method using sieves with apertures of 3,15 mm and above
09/30195711 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks Determination of the tumble and abrasion indices
DIN EN ISO 17829 E : 2016 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015)
BS ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks. Determination of the tumble and abrasion indices
PREN 14984 : DRAFT 2014 LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD
05/30132748 DC : DRAFT APR 2005 ISO 15967 - DIRECT REDUCED IRON - DETERMINATION OF THE TUMBLE AND ABRASION INDICES OF HOT BRIQUETTED IRON (HBI)
09/30186079 DC : 0 BS EN 12948 - LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING
05/30132745 DC : DRAFT APR 2005 ISO 13930 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY DYNAMIC METHOD
DIN EN ISO 17892-4 E : 2017 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 17892-4:2016)
DIN 4226-2:2002-02 AGGREGATES FOR CONCRETE AND MORTAR - PART 2: LIGHTWEIGHT AGGREGATES
DIN EN 12697-2 E : 2015 BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
I.S. EN ISO 17827-2:2016 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016)
I.S. EN ISO 18846:2016 SOLID BIOFUELS - DETERMINATION OF FINES CONTENT IN QUANTITIES OF PELLETS (ISO 18846:2016)
I.S. EN ISO 17892-4:2016 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION (ISO 7892-4:2016)
ISO 2395:1990 Test sieves and test sieving — Vocabulary
I.S. EN ISO 19743:2017 SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGER THAN 3,15 MM (ISO 19743:2017)
DIN EN ISO 19743:2016-04 (Draft) SOLID BIOFUELS - DETERMINATION OF CONTENT OF HEAVY EXTRANEOUS MATERIALS LARGER THAN 3,15 MM (ISO 19743:2017)
CAN/CSA-ISO 18846:17 Solid biofuels — Determination of fines content in samples of pellets (Adopted ISO 18846:2016, first edition, 2016-09-01)
DIN EN 14984 E : 2016 LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD
DIN EN 1367-5:2011-04 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
DIN EN 12697-1 E : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
UNE-EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
BS EN 933-1:2012 Tests for geometrical properties of aggregates Determination of particle size distribution. Sieving method
BS EN 933-2:1996 Tests for geometrical properties of aggregates Determination of particle size distribution. Test sieves, nominal size of apertures
I.S. EN 932-5:2012 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5 - COMMON EQUIPMENT AND CALIBRATION
I.S. EN 12697-18:2017 BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE
I.S. EN 933-1:2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
I.S. EN 14984:2016 LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD
I.S. EN 12948:2010 LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING
I.S. EN 1367-5:2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
BS 598-102:2003 Sampling and examination of bituminous mixtures for roads and other paved areas Analytical test methods
BS 1016-108.1:1996 Methods for analysis and testing of coal and coke. Tests special to coke Determination of shatter indices
BS 6219:1988 Specification for test sieves for cereals
BS 4987-1:2003 Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures
BS 594-1:2003 Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures
BS 594-1:2005 Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures
BS 6219:1996 Test sieves for cereals
BS 3406-2:1984 Methods for determination of particle size distribution Recommendations for gravitational liquid sedimentation methods for powders and suspensions
BS 4987-1:2005 Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures
ISO 3082:2017 Iron ores — Sampling and sample preparation procedures
PD CEN/TR 15149-3:2014 Solid biofuels. Determination of particle size distribution Rotary screen method
DIN EN 15149-2:2011-01 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
PREN 15415-2 : DRAFT 2010 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES
17/30358395 DC BS ISO 1920-13. Testing of concrete Part 13. Properties of fresh self compacting concrete
01/105764 DC : DRAFT JULY 2001 ISO/DIS 14688-2 - GEOTECHNICAL ENGINEERING - IDENTIFICATION AND CLASSIFICATION OF SOIL - PART 2: CLASSIFICATION AND QUANTIFICATION
DIN EN 15415-3:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
BS ISO 3082:2017 Iron ores. Sampling and sample preparation procedures
DIN EN 16455:2014-12 CONSERVATION OF CULTURAL HERITAGE - EXTRACTION AND DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN AND FROM CULTURAL HERITAGE
PREN 15210-1 : DRAFT 2009 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
BS EN ISO 17892-4:2016 Geotechnical investigation and testing. Laboratory testing of soil Determination of particle size distribution
I.S. EN 13055-1:2002 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
05/30132739 DC : DRAFT APR 2005 ISO 11257 - IRON ORES FOR SHAFT DIRECT-REDUCTION FEEDSTOCKS - DETERMINATION OF THE LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDEX AND DEGREE OF METALLIZATION
BS ISO 11277:2009 Soil quality. Determination of particle size distribution in mineral soil material. Method by sieving and sedimentation
CEI EN 61394 : 2012 OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY AND STEEL BARE CONDUCTORS
DIN EN ISO 17827-1 E : 2016 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE (ISO 17827-1:2016)
10/30219095 DC : 0 BS EN 15149-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: HORIZONTAL SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
BS EN 15415-3:2012 Solid recovered fuels. Determination of particle size distribution Method by image analysis for large dimension particles
UNI CEN/TS 15639 : 2010 SOLID RECOVERED FUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS
07/30166893 DC : 0 BS EN 61394 - OVERHEAD LINES - REQUIREMENTS FOR GREASES FOR ALUMINIUM, ALUMINIUM ALLOY STEEL BARE CONDUCTORS
DIN EN ISO 17827-2 E : 2016 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW (ISO 17827-2:2016)
13/30265118 DC : 0 BS ISO 11257 - IRON ORES FOR SHAFT DIRECT-REDUCTION FEEDSTOCKS - DETERMINATION OF THE LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDEX AND DEGREE OF METALLIZATION
I.S. EN 15415-3:2012 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES
BS EN 15149-1:2010 Solid biofuels. Determination of particle size distribution Oscillating screen method using sieve apertures of 1 mm and above
BS ISO 10836:1994 Iron ores. Method of sampling and sample preparation for physical testing
03/105598 DC : DRAFT MAY 2003 BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT
DIN EN ISO 17831-1:2016-05 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015)
07/30164932 DC : 0 BS EN 12350-11 - TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST
DD CEN/TS 15149-3:2006 Solid biofuels. Methods for the determination of particle size distribution Rotary screen method
BS ISO 1953:2015 Hard coal. Size analysis by sieving
UNE-EN 60079-5:2016 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
BS ISO 13930:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by dynamic method
PD 6682-9:2003 Aggregates Guidance on the use of European test method standards
15/30301564 DC : 0 BS ISO 15968 - DIRECT REDUCED IRON - DETERMINATION OF APPARENT DENSITY AND WATER ABSORPTION OF HOT BRIQUETTED IRON (HBI)
CAN/CSA-ISO 17827-1:17 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 1: OSCILLATING SCREEN METHOD USING SIEVES WITH APERTURES OF 3,15 MM AND ABOVE
DD CEN/TS 14243:2010 Materials produced from end of life tyres. Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
BS ISO 18899:2013 Rubber. Guide to the calibration of test equipment
DIN EN 15415-1:2011-11 Solid recovered fuels - Determination of particle size distribution - Part 1: Screen method for small dimension particles
I.S. CEN TS 15415:2006 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION BY SCREEN METHOD
BS EN ISO 17829:2015 Solid biofuels. Determination of length and diameter of pellets
NF EN 15210-1 : 2010 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
I.S. CEN ISO TS 17892-4:2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
ISO 2325:1986 Coke Size analysis (Nominal top size 20 mm or less)
I.S. EN ISO 17831-1:2015 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015)
I.S. EN 772-5:2016 METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS
NF EN 15415-1 : 2011 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES
UNI EN 15149-1 : 2011 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
ONORM EN 13383-2 : 2013 ARMOURSTONE - PART 2: TEST METHODS
ISO 4696-1:2015 Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 1: Reduction with CO, CO2, H2 and N2
ISO 16929:2013 Plastics Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
ISO 4701:2017 Iron ores and direct reduced iron Determination of size distribution by sieving
DIN EN 932-5:2012-05 Tests for general properties of aggregates - Part 5: Common equipment and calibration
DIN EN 933-1:2012-03 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
DIN EN 12948:2011-02 Liming materials - Determination of size distribution by dry and wet sieving
BS EN 14045:2003 Packaging. Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
BS EN 13383-2:2013 Armourstone Test methods
DIN EN 14984:2016-10 LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD
ISO 17827-1:2016 Solid biofuels Determination of particle size distribution for uncompressed fuels Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above
UNE-CEN/TS 14243:2012 EX Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities
EN 933-2:1995 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apterures
EN ISO 17829:2015 Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2015)
UNI CEN/TS 14243 : 2010 MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES
UNI EN 933-1 : 2012 TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION - SIEVING METHOD
UNI EN 1367-5 : 2011 TESTS FOR THERMAL AND WEATHERING PROPERTIES OF AGGREGATES - PART 5: DETERMINATION OF RESISTANCE TO THERMAL SHOCK
UNI EN 12948 : 2011 LIMING MATERIALS - DETERMINATION OF SIZE DISTRIBUTION BY DRY AND WET SIEVING
UNI EN 932-5 : 2012 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
UNI EN 13383-2 : 2013 ARMOURSTONE - PART 2: TEST METHODS
04/30091864 DC : DRAFT JUL 2004 ISO 22498 - PLASTICS - VINYL CHLORIDE HOMOPOLYMER AND COPOLYMER RESINS - PARTICLE SIZE DETERMINATION BY MECHANICAL SIEVING
DIN EN ISO 17831-1 E : 2016 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS (ISO 17831-1:2015)
I.S. EN ISO 5223:2015 TEST SIEVES FOR CEREALS (ISO 5223:1995, INCLUDING AMENDMENT 1:1999)
BS EN ISO 17827-2:2016 Solid biofuels. Determination of particle size distribution for uncompressed fuels Vibrating screen method using sieves with aperture of 3,15 mm and below
17/30365077 DC : 0 BS EN 14243-3 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 3: SHREDS, CUTS AND CHIPS - METHODS FOR DETERMINING THEIR DIMENSION(S) INCLUDING PROTRUDING FILAMENTS DIMENSIONS
DIN ISO 11277 E : 2002 SOIL QUALITY - DETERMINATION OF PARTICLE SIZE DISTRIBUTION IN MINERAL SOIL MATERIAL - METHOD BY SIEVING AND SEDIMENTATION
BS ISO 8371:2015 Iron ores for blast furnace feedstocks. Determination of the decrepitation index
DIN EN ISO 17829:2016-03 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015)
BS ISO 3093 : 2004 AMD 17028 WHEAT, RYE AND RESPECTIVE FLOURS, DURUM WHEAT AND DURUM WHEAT SEMOLINA - DETERMINATION OF THE FALLING NUMBER ACCORDING TO HAGBERG-PERTEN
BS 8471:2007 Guide to particle sizing methods
05/30132365 DC : DRAFT APR 2005 ISO 8371 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF THE DECREPITATION INDEX
BS ISO 16929:2013 Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
ISO 13930:2015 Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by dynamic method
UNI EN 15210-1 : 2010 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
DIN EN ISO 5223:2016-05 TEST SIEVES FOR CEREALS (ISO 5223:1995, INCLUDING AMENDMENT 1:1999)
UNI EN 15415-1 : 2011 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES
BS EN 61394:2011 Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
15/30328802 DC : 0 BS EN 12697-18 - BITUMINOUS MIXTURES - TEST METHODS - PART 18: BINDER DRAINAGE
BS ISO 15968:2016 Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI)
BS ISO 15967:2007 Direct reduced iron. Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
15/30275872 DC : 0 BS EN ISO 17827-2 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION FOR UNCOMPRESSED FUELS - PART 2: VIBRATING SCREEN METHOD USING SIEVES WITH APERTURE OF 3,15 MM AND BELOW
09/30186154 DC : 0 BS ISO 11323 - IRON ORE AND DIRECT REDUCED IRON - VOCABULARY
BS ISO 4696-2:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method Reduction with CO and N2
17/30340672 DC : 0 BS EN ISO 17892-12 - GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 12: DETERMINATION OF LIQUID AND PLASTIC TESTS
DIN EN 15149-1:2011-01 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
UNI EN 12350-11 : 2010 TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST
BS EN 12350-11:2010 Testing fresh concrete Self-compacting concrete. Sieve segregation test
BS ISO 11323:2010 Iron ore and direct reduced iron. Vocabulary
BS EN 12697-2:2015 Bituminous mixtures. Test methods Determination of particle size distribution
13/30265115 DC : 0 BS ISO 8371 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF THE DECREPITATION INDEX
16/30301962 DC : 0 BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES
09/30205556 DC : 0 BS EN 932-5 - TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
BS EN ISO 5223:2015 Test sieves for cereals
09/30198721 DC : 0 BS EN 15210-1 - SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
BS 1016-110.1:1996 Methods for analysis and testing of coal and coke. Size analysis of coke Nominal top size greater than 20 mm
BS ISO 4696-1:2015 Iron ores for blast furnace feedstocks. Determination of low-temperature reduction-disintegration indices by static method Reduction with CO, CO2, H2 and N2
UNI EN 15415-2 : 2012 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES
DIN 24042:1981-10 SQUARE HOLE PERFORATED PLATES - DIMENSIONS
DIN EN 12350-11:2010-12 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
UNE-EN 15149-1:2011 Solid biofuels - Determination of particle size distribution - Part 1: Oscillating screen method using sieve apertures of 1 mm and above
ISO 11277:2009 Soil quality Determination of particle size distribution in mineral soil material Method by sieving and sedimentation
UNI CEN ISO/TS 17892-4 : 2005 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
I.S. EN 12350-11:2010 TESTING FRESH CONCRETE - PART 11: SELF-COMPACTING CONCRETE - SIEVE SEGREGATION TEST
ISO 4150:2011 Green coffee or raw coffee — Size analysis — Manual and machine sieving
I.S. EN 12697-2:2015 BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
ISO 6783:1982 Coarse aggregates for concrete Determination of particle density and water absorption Hydrostatic balance method
ISO 10836:1994 Iron ores — Method of sampling and sample preparation for physical testing
PREN 14243-2 : DRAFT 2017 MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT
17/30365074 DC : 0 BS EN 14243-2 - MATERIALS OBTAINED FROM END OF LIFE TYRES - PART 2: GRANULATES AND POWDERS - METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES, INCLUDING FREE STEEL AND FREE TEXTILE CONTENT
UNE-EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
ISO 15967:2007 Direct reduced iron — Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
ISO 4696-2:2015 Iron ores for blast furnace feedstocks Determination of low-temperature reduction-disintegration indices by static method Part 2: Reduction with CO and N2
ISO 18899:2013 Rubber — Guide to the calibration of test equipment
S.R. CEN TS 15149-3:2006 SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: ROTARY SCREEN METHOD
ISO 616:1995 Coke Determination of shatter indices
ISO 17827-2:2016 Solid biofuels Determination of particle size distribution for uncompressed fuels Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below
ISO/TS 17892-4:2004 Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution
UNE-EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
BS EN 932-5:2012 Tests for general properties of aggregates Common equipment and calibration
IEC 61394:2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
ONORM EN 12697-1 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
UNE-EN 12697-1:2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 1: Soluble binder content
UNE-EN 932-5:2012 Tests for general properties of aggregates - Part 5: Common equipment and calibration
UNE 56810 :2002 Wood flooring. Installation. Specifications.
IEC 60079-5:2015 RLV Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
ISO 19743:2017 Solid biofuels — Determination of content of heavy extraneous materials larger than 3,15 mm
BS EN 13055-1:2002 Lightweight aggregates Lightweight aggregates for concrete, mortar and grout
ISO 17831-1:2015 Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets
ISO 17829:2015 Solid Biofuels Determination of length and diameter of pellets
UNI EN 12697-1 : 2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
ISO 17892-4:2016 Geotechnical investigation and testing Laboratory testing of soil Part 4: Determination of particle size distribution
BS EN 12697-1:2012 Bituminous mixtures. Test methods for hot mix asphalt Soluble binder content
BS EN 1367-5:2011 Tests for thermal and weathering properties of aggregates Determination of resistance to thermal shock
UNE-EN 12697-2:2015 Bituminous mixtures - Test methods - Part 2: Determination of particle size distribution
BS EN 12697-18:2017 Bituminous mixtures. Test methods Binder drainage
I.S. EN 12697-1:2012 BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT
ISO 18846:2016 Solid biofuels — Determination of fines content in quantities of pellets
BS EN 12948:2010 Liming materials. Determination of size distribution by dry and wet sieving
EN ISO 19743:2017 Solid biofuels - Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017)
EN ISO 18846:2016 Solid biofuels - Determination of fines content in quantities of pellets (ISO 18846:2016)
EN 1367-5:2011 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock
EN 772-5:2016/AC:2017 METHODS OF TEST FOR MASONRY UNITS - PART 5: DETERMINATION OF THE ACTIVE SOLUBLE SALTS CONTENT OF CLAY MASONRY UNITS
EN 12948:2010 Liming materials - Determination of size distribution by dry and wet sieving
EN 14045:2003 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions
EN 15415-2:2012 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
EN 16455:2014 Conservation of cultural heritage - Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage
EN ISO/TS 17892-4 : 2004 GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 4: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
EN 20340 : 1993 CONVEYOR BELTS - FLAME RETARDATION - SPECIFICATIONS AND TEST METHOD
EN 933-1:2012 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method
EN 15415-3:2012 Solid recovered fuels - Determination of particle size distribution - Part 3: Method by image analysis for large dimension particles
EN ISO 17827-2:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2016)
EN 932-5:2012/AC:2014 TESTS FOR GENERAL PROPERTIES OF AGGREGATES - PART 5: COMMON EQUIPMENT AND CALIBRATION
EN ISO 17827-1:2016 Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
EN 14984:2016 Liming materials - Determination of product effect on soil pH - Soil incubation method
EN ISO 17831-1:2015 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
EN ISO 17892-4:2016 Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO 17892-4:2016)
BS EN 15149-2:2010 Solid biofuels. Determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below
I.S. EN 15149-2:2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
10/30230003 DC : 0 BS EN 15415-2 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: MAXIMUM PROJECTED LENGTH METHOD (MANUAL) FOR LARGE DIMENSION PARTICLES
08/30147925 DC : DRAFT JAN 2008 BS ISO 3082 - IRON ORES - SAMPLING AND SAMPLE PREPARATION PROCEDURES
17/30345777 DC : 0 BS EN 13383-2 - ARMOURSTONE - PART 2: TEST METHODS
BS EN 15415-1:2011 Solid recovered fuels. Determination of particle size distribution Screen method for small dimension particles
10/30219097 DC : 0 BS EN 15149-1 - SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
14/30309972 DC : 0 BS EN 14984 - LIMING MATERIALS - DETERMINATION OF PRODUCT EFFECT ON SOIL PH - SOIL INCUBATION METHOD
BS 1016-109:1995 Methods for analysis and testing of coal and coke Size analysis of coal
09/30202313 DC : 0 BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
BS ISO 4150:2011 Green coffee or raw coffee. Size analysis. Manual and machine sieving
13/30265112 DC : 0 BS ISO 4696-2 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 2: REDUCTION WITH CO AND N[2]
ISO 11257:2015 Iron ores for shaft direct-reduction feedstocks Determination of the low-temperature reduction-disintegration index and degree of metallization
12/30263600 DC : 0 BS EN 16455 - CONSERVATION OF CULTURAL HERITAGE - DETERMINATION OF SOLUBLE SALTS IN NATURAL STONE AND RELATED MATERIALS USED IN CULTURAL HERITAGE
CAN/CSA-ISO 17827-2:17 Solid biofuels — Determination of particle size distribution for uncompressed fuels — Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (Adopted ISO 17827-2:2016, first edition, 2016-05-15)
NF EN 15149-2 : 2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
PD IEC 61394:1997 Overhead lines. Characteristics of greases for aluminium, aluminium alloy and steel bare conductors
DIN EN 12697-2:2015-07 BITUMINOUS MIXTURES - TEST METHODS - PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION
05/30132129 DC : DRAFT APR 2005 ISO 4696-1 - IRON ORES FOR BLAST FURNACE FEEDSTOCKS - DETERMINATION OF LOW-TEMPERATURE REDUCTION-DISINTEGRATION INDICES BY STATIC METHOD - PART 1: REDUCTION WITH CO, CO[2], H[2] AND N[2]
09/30197220 DC : 0 BS ISO 4150 - GREEN COFFEE - SIZE ANALYSIS - MANUAL AND MACHINE SIEVING
10/30230006 DC : 0 BS EN 15415-3 - SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES
DD CEN/TS 15149-1:2006 Solid biofuels. Methods for the determination of particle size distribution Oscillating screen method using sieve apertures of 3,15 mm and above
DD CEN/TS 15149-2:2006 Solid biofuels. Methods for the determination of particle size distribution Vibrating screen method using sieve apertures of 3,15 mm and below
DIN EN 15415-2:2012-06 Solid recovered fuels - Determination of particle size distribution - Part 2: Maximum projected length method (manual) for large dimension particles
I.S. EN 15415-1:2011 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: SCREEN METHOD FOR SMALL DIMENSION PARTICLES
UNE-EN 15149-2:2011 Solid biofuels - Determination of particle size distribution - Part 2: Vibrating screen method using sieve apertures of 3,15 mm and below
UNE-EN 15210-1:2010 Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets
I.S. EN ISO 17829:2015 SOLID BIOFUELS - DETERMINATION OF LENGTH AND DIAMETER OF PELLETS (ISO 17829:2015)
I.S. EN 15210-1:2009 SOLID BIOFUELS - DETERMINATION OF MECHANICAL DURABILITY OF PELLETS AND BRIQUETTES - PART 1: PELLETS
I.S. EN 60079-5:2015 EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
UNI EN 15415-3 : 2012 SOLID RECOVERED FUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 3: METHOD BY IMAGE ANALYSIS FOR LARGE DIMENSION PARTICLES
ISO 1953:2015 Hard coal — Size analysis by sieving
S.R. CEN TS 15149-2:2006 SOLID BIOFUELS - METHODS FOR THE DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 2: VIBRATING SCREEN METHOD USING SIEVE APERTURES OF 3,15 MM AND BELOW
S.R. CEN TS 14243:2010 MATERIALS PRODUCED FROM END OF LIFE TYRES - SPECIFICATION OF CATEGORIES BASED ON THEIR DIMENSION(S) AND IMPURITIES AND METHODS FOR DETERMINING THEIR DIMENSION(S) AND IMPURITIES
ISO 15968:2016 Direct reduced iron Determination of apparent density and water absorption of hot briquetted iron (HBI)
NF EN 15149-1 : 2010 SOLID BIOFUELS - DETERMINATION OF PARTICLE SIZE DISTRIBUTION - PART 1: OSCILLATING SCREEN METHOD USING SIEVE APERTURES OF 1 MM AND ABOVE
UNE-EN 16455:2016 Conservation of cultural heritage - Extraction and determination of soluble salts in natural stone and related materials used in and from cultural heritage
IEC 60079-5 REDLINE : 4ED 2015 EXPLOSIVE ATMOSPHERES - PART 5: EQUIPMENT PROTECTION BY POWDER FILLING 'Q'
BS EN 14984:2016 Liming materials. Determination of product effect on soil pH. Soil incubation method
BS EN 20340:1993 Conveyor belts. Flame retardation. Specifications and test method
EN 12350-11:2010 Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test
EN 61394:2011 Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
DIN 4924:1998-08 SANDS AND GRAVELS FOR WELL CONSTRUCTION - REQUIREMENTS AND TESTING
DIN EN 13055-1:2002-08 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
DIN ISO 11277:2002-08 Soil quality - Determination of particle size distribution in mineral soil material - Method by sieving and sedimentation (ISO 11277:1998 + Corr 1:2002)
CEN/TS 15415:2006 Solid recovered fuels - Determination of particle size distribution by screen method
EN 60079-5:2015 Explosive atmospheres - Part 5: Equipment protection by powder filling "q"
DIN EN 14045:2003-06 PACKAGING - EVALUATION OF THE DISINTEGRATION OF PACKAGING MATERIALS IN PRACTICAL ORIENTED TESTS UNDER DEFINED COMPOSTING CONDITIONS

ISO 2395:1990 Test sieves and test sieving — Vocabulary
AS 4133.0:2019 Methods of testing rocks for engineering purposes General requirements and list of methods
ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
ISO 2591-1:1988 Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
AS 1289.4.1.1:2019 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the organic matter content of a soil - Normal method
AS 1141.11.2:2019 Methods for sampling and testing aggregates Particle size distribution for vision sizing systems
AS 4439.3:2019 Wastes, sediments and contaminated soils Preparation of leachates - Bottle leaching procedure
EN 10204:2004 Metallic products - Types of inspection documents
AS 1289.4.2.1:2020 Methods of testing soils for engineering purposes Soil chemical tests - Determination of the sulfate content of a natural soil and the sulfate content of the groundwater - Normal method

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.