ISO 3506-3:2009
Current
The latest, up-to-date edition.
Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
29-10-2009
ISO 3506-3:2009 specifies the mechanical properties of set screws and similar fasteners not under tensile stress made of austenitic stainless steel, when tested over an ambient temperature range of 10 C to 35 C. Properties vary at higher or lower temperatures.
ISO 3506-3:2009 applies to set screws and similar fasteners:
- with nominal thread diameter 1,6 mm d 24 mm;
- of triangular ISO metric threads with diameters and pitches in accordance with ISO 68-1, ISO 261 and ISO 262;
- of any shape.
It does not apply to screws with special properties, such as weldability.
DevelopmentNote |
Supersedes ISO 3506 (04/2001) Supersedes ISO/DIS 3506-3. (11/2009)
|
DocumentType |
Standard
|
Pages |
17
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN ISO 3506-3:2009 | Identical |
IS 1367 : Part 14 : Sec 3 : 2018 | Identical |
I.S. EN ISO 3506-3:2009 | Identical |
BS EN ISO 3506-3:2009 | Identical |
NBN EN ISO 3506-3 : 2010 | Identical |
UNI EN ISO 3506-3 : 2010 | Identical |
NS EN ISO 3506-3 : 2009 | Identical |
GOST ISO 3506-3 : 2014 | Identical |
UNE-EN ISO 3506-3:2010 | Identical |
NF EN ISO 3506-3 : 2010 | Identical |
NEN EN ISO 3506-3 : 2009 | Identical |
SN EN ISO 3506-3 : 2010 | Identical |
DIN EN ISO 3506-3:2010-04 | Identical |
PN EN ISO 3506-3 : 2009 | Identical |
GOST R ISO 3506-3 : 2009 | Identical |
BIS IS 1367-14-3 : 2002 | Identical |
SANS 1700-5-10 : 1.01ED 2003(R2010) | Identical |
16/30341810 DC : 0 | BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS |
16/30341790 DC : 0 | BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS |
BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
NF EN ISO 4766 : 2011 | SLOTTED SET SCREWS WITH FLAT POINT |
BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
IEC 60335-2-37:2017 | Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers |
I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
ISO 4029:2003 | Hexagon socket set screws with cup point |
BS EN ISO 4029:2003 | Hexagon socket set screws with cup point |
DIN EN ISO 4029:2004-05 | Hexagon socket set screws with cup point (ISO 4029:2003) |
DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
DIN EN ISO 16048:2003-06 | PASSIVATION OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS |
EN 12255-1:2002 | Wastewater treatment plants - Part 1: General construction principles |
EN ISO 4029:2003 | Hexagon socket set screws with cup point (ISO 4029:2003) |
IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
ISO 16228:2017 | Fasteners — Types of inspection documents |
I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
BS EN ISO 4027:2003 | Hexagon socket set screws with cone point |
DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
ONORM EN 1993-1-4 : 2015 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-4: GENERAL RULES - SUPPLEMENTARY RULES FOR STAINLESS STEELS |
KTA 3507 : 2014(R2017) | FACTORY TESTS, POST-REPAIR TESTS AND CERTIFICATION OF SATISFACTORY PERFORMANCE IN SERVICE OF MODULES AND DEVICES FOR THE INSTRUMENTATION AND CONTROLS OF THE SAFETY SYSTEM |
KTA 3702 : 2014(R2017) | EMERGENCY POWER GENERATING FACILITIES WITH DIESEL-GENERATOR UNITS IN NUCLEAR POWER PLANTS |
DIN EN ISO 4766:2011-11 | Slotted set screws with flat point (ISO 4766:2011) |
IEC 60335-2-36:2017 | Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements |
18/30351048 DC : 0 | BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS |
I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
16/30341798 DC : 0 | BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM |
09/30208236 DC : 0 | BS ISO 4766 - SLOTTED SET SCREWS WITH FLAT POINT |
UNI EN ISO 4766 : 2012 | SLOTTED SET SCREWS WITH FLAT POINT |
DIN EN 1090-5 E : 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
PREN ISO 4766 : DRAFT 2009 | SLOTTED SET SCREWS WITH FLAT POINT |
UNE-EN ISO 4766:2012 | Slotted set screws with flat point (ISO 4766:2011) |
IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines |
EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
ISO 4028:2003 | Hexagon socket set screws with dog point |
BS EN ISO 4028:2003 | Hexagon socket set screws with dog point |
IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie |
IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters |
EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
IEC 60335-2-39:2012+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans |
BS EN ISO 2342:2003 | Slotted headless screws with shank |
BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
ISO 3269:2000 | Fasteners Acceptance inspection |
IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans |
BS EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens |
ISO 2342:2003 | Slotted headless screws with shank |
IEC 60335-2-99:2003+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods |
ISO 4766:2011 | Slotted set screws with flat point |
IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm |
IEC 61518:2001 | Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa) |
IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills |
BS EN 12255-1:2002 | Wastewater treatment plants General construction principles |
ISO 4026:2003 | Hexagon socket set screws with flat point |
ISO 4027:2003 | Hexagon socket set screws with cone point |
DIN EN ISO 4026:2004-05 | Hexagon socket set screws with flat point (ISO 4026:2003) |
DIN EN ISO 4028:2004-05 | Hexagon socket set screws with dog point (ISO 4028:2003) |
EN ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners (ISO 16048:2003) |
EN ISO 4766:2011 | Slotted set screws with flat point (ISO 4766:2011) |
EN ISO 4027:2003 | Hexagon socket set screws with cone point (ISO 4027:2003) |
EN ISO 4026:2003 | Hexagon socket set screws with flat point (ISO 4026:2003) |
EN ISO 2342:2003 | Slotted headless screws with shank (ISO 2342:2003) |
EN ISO 4028 : 2003 | Hexagon socket set screws with dog point (ISO 4028:2003) |
BS EN ISO 4766:2011 | Slotted set screws with flat point |
DIN 19558:2002-12 | WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT |
16/30341794 DC : 0 | BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS |
BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
I.S. EN ISO 4766:2011 | SLOTTED SET SCREWS WITH FLAT POINT |
I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
BS EN ISO 4026:2003 | Hexagon socket set screws with flat point |
EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
DIN EN ISO 2342:2004-05 | Slotted headless screws with shank (ISO 2342:2003) |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
ISO 16426:2002 | Fasteners — Quality assurance system |
ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
ISO 16048:2003 | Passivation of corrosion-resistant stainless-steel fasteners |
ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
ISO 261:1998 | ISO general purpose metric screw threads General plan |
ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
ISO 4954:1993 | Steels for cold heading and cold extruding |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.