ISO 3722:1976
Current
The latest, up-to-date edition.
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
01-09-1976
Specifies a method, and establishes a means for ensuring that the accuracy of particulate contamination analyses in hydraulic systems is not degraded by a lack of sample container cleanliness. Gives definitions and tabulates the inspection ratios together with the AQQL values of concern.
Committee |
ISO/TC 131/SC 6
|
DevelopmentNote |
Supersedes NFPA T2.9.2 (01/2002) Supersedes ANSI B93.20M (01/2005)
|
DocumentType |
Standard
|
Pages |
2
|
ProductNote |
This standard also refers to ISO 4408.
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
SAC GB/T 17484 : 1998 | Identical |
NEN ISO 3722 : 1995 | Identical |
SNV ISO 3722 : 1976 | Identical |
BS 5540-1:1978 | Identical |
NFE 48 653 : 1991 | Similar to |
BIS IS 13569 : 1993(R2002) | Identical |
NBN E 48 012 : 1987 | Identical |
UNI ISO 3722 : 1995 | Identical |
NFL 41 130 : 1987 XP | CONTAMINATION OF AIRCRAFT FUEL SYSTEMS - FILTERS AND FILTER ELEMENTS - DEFINITIONS AND CHARACTERISTICS |
XP ISO/TS 11365 : 2011 XP | PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR THE MAINTENANCE AND USE OF TRIARYL PHOSPHATE ESTER TURBINE-CONTROL FLUIDS |
DD ISO/TS 11365:2011 | Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
05/30098238 DC : 0 | ISO 21081-2 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 2: FILTER BLOCKAGE TECHNIQUE |
BS ISO 16431:2012 | Hydraulic fluid power. System clean-up procedures and verification of cleanliness of assembled systems |
BS ISO 14085-6:2015 | Aerospace series. Hydraulic filter elements. Test methods Initial cleanliness level |
07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
BS 7403-11:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters |
13/30271038 DC : 0 | BS ISO 14085-4 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 4: VERIFICATION OF COLLAPSE/BURST PRESSURE RATING |
09/30171027 DC : 0 | BS ISO 11171 - HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
ISO 3938:1986 | Hydraulic fluid power — Contamination analysis — Method for reporting analysis data |
ISO 4548-11:1997 | Methods of test for full-flow lubricating oil filters for internal combustion engines Part 11: Self-cleaning filters |
ISO 21018-3:2008 | Hydraulic fluid power — Monitoring the level of particulate contamination of the fluid — Part 3: Use of the filter blockage technique |
ISO 16889:2008 | Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
ASTM D 6439 : 2011 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
ISO/TR 13353:1994 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting retention capacity and gravimetric efficiency |
PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
ISO 21018-1:2008 | Hydraulic fluid power Monitoring the level of particulate contamination of the fluid Part 1: General principles |
10/30207686 DC : DRAFT DEC 2010 | BS ISO 12345 - DIESEL ENGINES - CLEANLINESS ASSESSMENT OF FUEL INJECTION EQUIPMENT |
ISO/TS 13353:2002 | Diesel fuel and petrol filters for internal combustion engines Initial efficiency by particule counting |
16/30266482 DC : 0 | BS ISO 12669 - HYDRAULIC FLUID POWER - METHOD FOR DETERMINING THE REQUIRED CLEANLINESS LEVEL (RCL) FOR A SYSTEM |
ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
ISO/TS 16332:2006 | Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency |
BS ISO 16232-5:2007 | Road vehicles. Cleanliness of components of fluid circuits Method of extraction of contaminants on functional test bench |
14/30273508 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
ISO 16431:2012 | Hydraulic fluid power — System clean-up procedures and verification of cleanliness of assembled systems |
BS ISO 16889 : 2008 | HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT |
ISO 14085-3:2015 | Aerospace series Hydraulic filter elements Test methods Part 3: Filtration efficiency and retention capacity |
SAE J 1227 : 2013 | ASSESSING CLEANLINESS OF HYDRAULIC FLUID POWER COMPONENTS AND SYSTEMS |
NF ISO 21018-1 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
BS ISO 21018-1:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid General principles |
BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
ISO 12345:2013 | Diesel engines Cleanliness assessment of fuel injection equipment |
PD ISO/TS 18409:2018 | Hydraulic fluid power. Hose and hose assemblies. Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
09/30176303 DC : 0 | BS ISO 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - SYSTEM CLEAN-UP PROCEDURES AND VERIFICATION OF CLEANLINESS |
08/30168618 DC : DRAFT JAN 2008 | BS ISO 28523 - SHIPS AND MARINE TECHNOLOGY - SAMPLING FROM LUBRICATING OIL AND HYDRAULIC OIL SYSTEMS - GUIDANCE FOR SAMPLING FOR DETERMINATION OF CLEANLINESS AND SOLID PARTICLE CONTAMINATION |
PD ISO/TS 16431:2002 | Hydraulic fluid power. Assembled systems. Verification of cleanliness |
DIN ISO 5884:1989-12 | AEROSPACE - FLUID SYSTEMS AND COMPONENTS - METHODS FOR SYSTEM SAMPLING AND MEASURING THE SOLID PARTICLE CONTAMINATION OF HYDRAULIC FLUIDS |
XP ISO/TS 11366 : 2011 XP | PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
ISO 14085-6:2015 | Aerospace series Hydraulic filter elements Test methods Part 6: Initial cleanliness level |
16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
15/30271100 DC : 0 | BS ISO 16332 - DIESEL ENGINES - FUEL FILTERS - METHOD FOR EVALUATING FUEL/ WATER SEPARATION EFFICIENCY |
BS ISO 4407:2002 | Hydraulic fluid power. Fluid contamination. Determination of particulate contamination by the counting method using an optical microscope |
16/30323482 DC : 0 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
ISO 4402:1991 | Hydraulic fluid power — Calibration of automatic-count instruments for particles suspended in liquids — Method using classified AC Fine Test Dust contaminant |
ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO 11365:2017 | Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
BS ISO 18413:2015 | Hydraulic fluid power. Cleanliness of components. Inspection document and principles related to contaminant extraction and analysis, and data reporting |
ASTM D 7647 : 2010 | Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction |
NF ISO/TS 16431 : 2002 XP | HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - VERIFICATION OF CLEANLINESS |
ISO 21018-4:2016 | Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique |
ISO/TS 11365:2011 | Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids |
NF ISO 21018-3 : 2008 | HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE |
04/30098080 DC : DRAFT APR 2004 | ISO 16232-1 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 1: VOCABULARY |
BS ISO 11171:2016 | Hydraulic fluid power. Calibration of automatic particle counters for liquids |
13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
NF ISO 4407 : 2002 | HYDRAULIC FLUID POWER - FLUID CONTAMINATION - DETERMINATION OF PARTICULATE CONTAMINATION BY THE COUNTING METHOD USING AN OPTICAL MICROSCOPE |
BS ISO 21018-3:2008 | Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid Use of the filter blockage technique |
05/30098235 DC : 0 | ISO 21081-1 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES |
17/30360001 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
BS ISO 12345:2013 | Diesel engines. Cleanliness assessment of fuel injection equipment |
BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
00/704296 DC : DRAFT FEB 2000 | ISO/CD 16431 - HYDRAULIC FLUID POWER - ASSEMBLED SYSTEMS - METHOD FOR ACHIEVING ROLL-OFF CLEANLINESS |
04/30098093 DC : DRAFT APR 2004 | ISO 16232-5 - ROAD VEHICLES - CLEANLINESS OF COMPONENTS OF FLUID CIRCUITS - PART 5: METHOD OF EXTRACTION OF CONTAMINANTS ON FUNCTIONAL TEST BENCH |
04/302050 DC : DRAFT JAN 2004 | ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
API 17F REDLINE : 2006 | SPECIFICATION FOR SUBSEA PRODUCTION CONTROL SYSTEMS |
API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
SAE J 2312 : 2013 | AUTOMATIC TRANSMISSION INTAKE FILTER TEST PROCEDURE |
ISO 16232-5:2007 | Road vehicles Cleanliness of components of fluid circuits Part 5: Method of extraction of contaminants on functional test bench |
SAE ARP 1953 : 2014 | ACCEPTANCE TEST PROCEDURES AND STANDARDS TO ENSURE CLEAN FUEL SYSTEM COMPONENTS |
ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
ISO 28523:2009 | Ships and marine technology — Lubricating and hydraulic oil systems — Guidance for sampling to determine cleanliness and particle contamination |
ISO 13628-6:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 6: Subsea production control systems |
08/30187368 DC : DRAFT JULY 2008 | BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS |
08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
BS EN ISO 13628-6:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Subsea production control systems |
EN ISO 13628-6:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 6: Subsea production control systems (ISO 13628-6:2006) |
12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
BS ISO 11365:2017 | Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids |
16/30268528 DC : 0 | BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS |
98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
05/30098254 DC : DRAFT JUL 2005 | ISO 23309 - HYDRAULIC FLUID POWER - PIPING SYSTEMS - METHODS FOR CLEANING AND FLUSHING |
06/30128772 DC : DRAFT OCT 2006 | ISO 16889 - HYDRAULIC FLUID POWER FILTERS - MULTI-PASS METHOD FOR FILTRATION PERFORMANCE OF A FILTER ELEMENT |
ISO/TS 18409:2018 | Hydraulic fluid power Hose and hose assemblies Method of collecting a fluid sample for analyzing the cleanliness of a hose or hose assembly |
BS 6275-1:1982 | Hydraulic fluid power filter elements Method of evaluating filtration performance (multi-pass method) |
13/30271044 DC : 0 | BS ISO 14085-6 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 6: INITIAL CLEANLINESS LEVEL |
09/30204130 DC : DRAFT MAY 2009 | BS ISO 11217 - AEROSPACE - HYDRAULIC SYSTEM FLUID CONTAMINATION - LOCATION OF SAMPLING POINTS AND CRITERIA FOR SAMPLING |
ASTM D 6439 : 2011 : R2017 | Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems |
NF ISO 11171 : 2011 | HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
ISO 16332:2018 | Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency |
ISO 18413:2015 | Hydraulic fluid power Cleanliness of components Inspection document and principles related to contaminant extraction and analysis, and data reporting |
BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
ISO 23309:2007 | Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.