|
DIN 51576:2003-01
|
TESTING OF MINERAL OIL HYDROCARBONS - DETERMINATION OF SALT CONTENT |
|
I.S. EN 12662:2014
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
BS ISO 11425:1996
|
RUBBER HOSES AND HOSE ASSEMBLIES FOR AUTOMOBILE POWER-STEERING SYSTEMS - SPECIFICATION |
|
15/30315528 DC : 0
|
BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
|
ISO 21869:2006
|
Rubber compounding ingredients Magnesium oxide Methods of test |
|
09/30178949 DC : 0
|
BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION |
|
BS ISO 4802-1:2016
|
Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by titration method and classification |
|
ISO 4404:1998
|
Petroleum and related products Determination of the corrosion resistance of water-containing fire-resistant fluids for hydraulic systems |
|
ISO 10136-3:1993
|
Glass and glasssware Analysis of extract solutions Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry |
|
ASTM D 7646 : 2010
|
Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis |
|
DIN EN 14291 E : 2005
|
FOAM PRODUCING SOLUTIONS FOR LEAK DETECTION ON GAS INSTALLATIONS |
|
BS EN 1772:2000
|
SURFACE ACTIVE AGENTS - DETERMINATION OF WETTING POWER BY IMMERSION |
|
ISO 9934-2:2015
|
Non-destructive testing Magnetic particle testing Part 2: Detection media |
|
BS EN 12662:2014
|
Liquid petroleum products. Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
|
BS EN 14291:2004
|
FOAM PRODUCING SOLUTIONS FOR LEAK DETECTION ON GAS INSTALLATIONS |
|
DIN ISO 11235:2006-07
|
RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS |
|
EN 1163 : 1996
|
FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE OIL AND FAT CONTENT |
|
EN 12634:1998
|
Petroleum products and lubricants - Determination of acid number - Non-aqueous potentiometric titration method |
|
EN 12662:2014
|
Liquid petroleum products - Determination of total contamination in middle distillates, diesel fuels and fatty acid methyl esters |
|
EN 12274-7 : 2005
|
Slurry surfacing - Test methods - Part 7: Shaking abrasion test |
|
EN 1165 : 1996
|
FEATHER AND DOWN - TEST METHODS - DETERMINATION OF WATER-SOLUBLE CHLORIDES |
|
ONORM EN ISO 13807 : 2009
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF CRACK FORMATION TEMPERATURE IN THE THERMAL SHOCK TESTING OF ENAMELS FOR THE CHEMICAL INDUSTRY |
|
OVE EN IEC 60296:2023 01 01
|
Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment |
|
EN ISO 3262-20:2000
|
EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 20: FUMED SILICA |
|
DIN EN ISO 13805:2009-04
|
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999) |
|
PREN 12662 : DRAFT 2012
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
BS EN ISO 13805:2009
|
VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM - DETERMINATION OF THE ADHESION OF ENAMELS ON ALUMINIUM UNDER THE ACTION OF ELECTROLYTIC SOLUTION (SPALL TEST) |
|
BS EN ISO 13807:2009
|
Vitreous and porcelain enamels. Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry |
|
04/30090843 DC : DRAFT MAY 2004
|
BS ISO 21869 - RUBBER COMPOUNDING INGREDIENTS - MAGNESIUM OXIDE - METHODS OF TEST |
|
BS ISO 4802-2:2016
|
Glassware. Hydrolytic resistance of the interior surfaces of glass containers Determination by flame spectrometry and classification |
|
DIN ISO 11235 E : 2006
|
RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS |
|
UNI EN ISO 13805 : 2009
|
VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM - DETERMINATION OF THE ADHESION OF ENAMELS ON ALUMINIUM UNDER THE ACTION OF ELECTROLYTIC SOLUTION (SPALL TEST) |
|
13/30261099 DC : 0
|
BS ISO 17947 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF FINE SILICON NITRIDE POWDERS |
|
ISO 10136-4:1993
|
Glass and glassware Analysis of extract solutions Part 4: Determination of aluminium oxide by molecular absorption spectrometry |
|
ISO 10136-1:1993
|
Glass and glassware Analysis of extract solutions Part 1: Determination of silicon dioxide by molecular absorption spectrometry |
|
ISO 10478:1994
|
Petroleum products Determination of aluminium and silicon in fuel oils Inductively coupled plasma emission and atomic absorption spectroscopy methods |
|
DIN EN 12662:2014-07
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
DIN EN ISO 4404-2:2011-03
|
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
|
DIN EN ISO 4404-2 E : 2011
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
|
BS EN ISO 3262-21:2000
|
Extenders for paints. Specifications and methods of test Silica sand (unground natural quartz) |
|
UNE-EN ISO 4404-1:2012
|
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
|
ISO 4404-1:2012
|
Petroleum and related products — Determination of the corrosion resistance of fire-resistant hydraulic fluids — Part 1: Water-containing fluids |
|
BS EN ISO 4404-2:2010
|
Petroleum and related products. Determination of the corrosion resistance of fire-resistant hydraulic fluids Non-aqueous fluids |
|
DIN EN 12662:1998-10
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
I.S. EN ISO 4404-1:2012
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
|
I.S. EN ISO 9934-2:2015
|
NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015) |
|
I.S. EN ISO 4404-2:2010
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
|
BS 3473-2:1987
|
CHEMICAL RESISTANCE OF GLASS USED IN THE PRODUCTION OF LABORATORY GLASSWARE - METHOD FOR DETERMINATION OF HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 98 DEGREE C |
|
BS 2734:1997
|
SPECIFICATION FOR NARROW-NECKED BOILING FLASKS |
|
DIN ISO 10478 E : 2016
|
PETROLEUM PRODUCTS - DETERMINATION OF ALUMINIUM AND SILICON IN FUEL OILS - INDUCTIVELY COUPLED PLASMA EMISSION AND ATOMIC ABSORPTION SPECTROSCOPY METHODS (ISO 10478:1994) |
|
13/30281192 DC : 0
|
BS EN ISO 9934-2 - NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA |
|
BS 3473-5:1987
|
CHEMICAL RESISTANCE OF GLASS USED IN THE PRODUCTION OF LABORATORY GLASSWARE - METHOD FOR DETERMINATION OF RESISTANCE OF GLASS TO ATTACK BY 6 MOL/L HYDROCHLORIC ACID AT 100 DEGREE C |
|
I.S. EN ISO 13807:2009
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF CRACK FORMATION TEMPERATURE IN THE THERMAL SHOCK TESTING OF ENAMELS FOR THE CHEMICAL INDUSTRY |
|
13/30261093 DC : 0
|
BS ISO 17942 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF BORON NITRIDE POWDERS |
|
UNI EN ISO 13807 : 2009
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF CRACK FORMATION TEMPERATURE IN THE THERMAL SHOCK TESTING OF ENAMELS FOR THE CHEMICAL INDUSTRY |
|
BS ISO 13805 : 1999
|
VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM - DETERMINATION OF THE ADHESION OF ENAMELS ON ALUMINIUM UNDER THE ACTION OF ELECTROLYTIC SOLUTION (SPALL TEST) |
|
BS ISO 17942:2014
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - METHODS FOR CHEMICAL ANALYSIS OF BORON NITRIDE POWDERS |
|
12/30266121 DC : 0
|
BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
NF EN ISO 105 Z09 : 1998
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATERS-SOLUBLE DYES |
|
ISO 11235:2016
|
Rubber compounding ingredients Sulfenamide accelerators Test methods |
|
ISO 11425:1996
|
Rubber hoses and hose assemblies for automobile power-steering systems Specification |
|
ISO 9271:1992
|
Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles |
|
DIN EN ISO 9934-2:2015-12
|
NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015) |
|
DIN EN 12274-7:2005-08
|
SLURRY SURFACING - PART 7: SHAKING ABRASION TEST |
|
ISO 4404-2:2010
|
Petroleum and related products Determination of the corrosion resistance of fire-resistant hydraulic fluids Part 2: Non-aqueous fluids |
|
BS EN 12634:1998
|
Petroleum products and lubricants. Determination of acid number. Non-aqueous potentiometric titration method |
|
DIN EN ISO 4404-1:2012-10
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
|
DIN EN ISO 4404-1 E : 2012
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
|
UNI EN ISO 4404-2 : 2011
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 2: NON-AQUEOUS FLUIDS |
|
UNI EN 12274-7 : 2005
|
SLURRY SURFACING - TEST METHODS - PART 7: SHAKING ABRASION TEST |
|
BS 1751:1997
|
LABORATORY GLASSWARE - SPECIFICATION FOR STRAIGHT-BORE GLASS STOPCOCKS FOR GENERAL PURPOSES |
|
UNI EN 12662 : 2014
|
LIQUID PETROLEUM PRODUCTS - DETERMINATION OF TOTAL CONTAMINATION IN MIDDLE DISTILLATES, DIESEL FUELS AND FATTY ACID METHYL ESTERS |
|
UNI EN ISO 4404-1 : 2013
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
|
BS ISO 11235:2016
|
Rubber compounding ingredients. Sulfenamide accelerators. Test methods |
|
BS ISO 4800:1998
|
LABORATORY GLASSWARE - SEPARATING FUNNELS AND DROPPING FUNNELS |
|
ISO 4802-1:2016
|
Glassware Hydrolytic resistance of the interior surfaces of glass containers Part 1: Determination by titration method and classification |
|
BS ISO 13807 : 1999
|
VITREOUS AND PORCELAIN ENAMELS - DETERMINATION OF CRACK FORMATION TEMPERATURE IN THE THERMAL SHOCK TESTING OF ENAMELS FOR THE CHEMICAL INDUSTRY |
|
BS ISO 21869:2006
|
Rubber compounding ingredients. Magnesium oxide. Methods of test |
|
BS ISO 4404-1 : 2001 AMD 16690
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
|
10/30196081 DC : 0
|
BS ISO 4404-1 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS |
|
BS ISO 4798:1997
|
LABORATORY GLASSWARE - FILTER FUNNELS |
|
07/30166903 DC : DRAFT AUG 2007
|
BS EN 12662 - LIQUID PETROLEUM PRODUCTS - DETERMINATION OF CONTAMINATION IN MIDDLE DISTILLATES |
|
BS ISO 3585:1998
|
BOROSILICATE GLASS 3.3 - PROPERTIES |
|
ASTM D 7646 : 2010 : R2014
|
Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis |
|
ISO 4802-2:2016
|
Glassware Hydrolytic resistance of the interior surfaces of glass containers Part 2: Determination by flame spectrometry and classification |
|
ISO 10136-6:1993
|
Glass and glassware Analysis of extract solutions Part 6: Determination of boron(III) oxide by molecular absorption spectrometry |
|
UNE-EN ISO 9934-2:2016
|
Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
|
ISO 719:1985
|
Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
|
BS EN 12274-7:2005 (published 2006-03)
|
Slurry surfacing. Test methods Shaking abrasion test |
|
BS EN ISO 105-Z09:1998
|
TEXTILES - TESTS FOR COLOUR FASTNESS - DETERMINATION OF COLD WATER SOLUBILITY OF WATER-SOLUBLE DYES |
|
BS EN ISO 9934-2:2015
|
NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA |
|
BS EN ISO 3262-20:2000
|
Extenders for paints. Specifications and methods of test Fumed silica |
|
ISO 105-Z09:1995
|
Textiles — Tests for colour fastness — Part Z09: Determination of cold water solubility of water-soluble dyes |
|
ISO 3262-20:2000
|
Extenders for paints Specifications and methods of test Part 20: Fumed silica |
|
UNE-EN ISO 4404-2:2011
|
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
|
ISO 8022:1990
|
Surface active agents Determination of wetting power by immersion |
|
EN 14291:2004
|
Foam producing solutions for leak detection on gas installations |
|
EN ISO 105-Z09 : 1997
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATER-SOLUBLE DYES |
|
EN ISO 9934-2:2015
|
Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
|
EN 1772 : 2000
|
SURFACE ACTIVE AGENTS - DETERMINATION OF WETTING POWER BY IMMERSION |
|
EN ISO 4404-2:2010
|
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 2: Non-aqueous fluids (ISO 4404-2:2010) |
|
EN ISO 3262-21 : 2000
|
EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - PART 21: SILICA SAND (UNGROUND NATURAL QUARTZ) |
|
EN ISO 13805:2009
|
Vitreous and porcelain enamels for aluminium - Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) (ISO 13805:1999) |
|
EN ISO 13807:2009
|
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999, including Cor 1:2000) |
|
EN ISO 4404-1:2012
|
Petroleum and related products - Determination of the corrosion resistance of fire-resistant hydraulic fluids - Part 1: Water-containing fluids (ISO 4404-1:2012) |
|
DIN ISO 10478:2016-07
|
Petroleum products - Determination of aluminium and silicon in fuel oils - Inductively coupled plasma emission and atomic absorption spectroscopy methods (ISO 10478:1994) |
|
15/30315525 DC : 0
|
BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
|
BS 3473-4(1983) : LATEST
|
CHEMICAL RESISTANCE OF GLASS USED IN THE PRODUCTION OF LABORATORY GLASSWARE - METHOD FOR DETERMINATION OF HYDROLYTIC RESISTANCE OF THE INTERIOR OF GLASS CONTAINERS |
|
DIN EN ISO 13807:2009-04
|
Vitreous and porcelain enamels - Determination of crack formation temperature in the thermal shock testing of enamels for the chemical industry (ISO 13807:1999, including Cor 1:2000) |
|
09/30178946 DC : 0
|
BS ISO 4802-1 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 1: DETERMINATION BY TITRATION METHOD AND CLASSIFICATION |
|
BS ISO 4404:1998
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF WATER-CONTAINING FIRE-RESISTANT FLUIDS FOR HYDRAULIC SYSTEMS |
|
BS 2000-377(1995) : 1995
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS - DETERMINATION OF ALUMINIUM AND SILICON IN FUEL OILS - INDUCTIVELY COUPLED PLASMA EMISSION AND ATOMIC ABSORPTION SPECTROSCOPY METHODS |
|
I.S. EN ISO 13805:2009
|
VITREOUS AND PORCELAIN ENAMELS FOR ALUMINIUM - DETERMINATION OF THE ADHESION OF ENAMELS ON ALUMINIUM UNDER THE ACTION OF ELECTROLYTIC SOLUTION (SPALL TEST) |
|
BIS IS 2303-1-2 : 2012(R2017)
|
GRADING GLASS - PART 1: METHOD OF TEST AND CLASSIFICATION - SECTION 2: HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 DEGREES C |
|
IP PM CW : 2004
|
DETERMINATION OF LOW LEVEL METALLIC ELEMENTS IN VACUUM GAS OIL/WAXY DISTILLATES AND CRUDE OILS - FLAME ATOMIC ABSORPTION SPECTROPHOTOMETRY (AAS) OR INDUCTIVELY COUPLED PLASMA-EMISSION SPECTROPHOTOMETRY (ICP-ES) METHOD |
|
ISO 17942:2014
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Methods for chemical analysis of boron nitride powders |
|
ISO 10136-5:1993
|
Glass and glassware Analysis of extract solutions Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry |
|
ISO 3262-21:2000
|
Extenders for paints Specifications and methods of test Part 21: Silica sand (unground natural quartz) |
|
BS EN ISO 4404-1:2012
|
PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE CORROSION RESISTANCE OF FIRE-RESISTANT HYDRAULIC FLUIDS - PART 1: WATER-CONTAINING FLUIDS (ISO 4404-1:2012) |
|
ISO 13805:1999
|
Vitreous and porcelain enamels for aluminium Determination of the adhesion of enamels on aluminium under the action of electrolytic solution (spall test) |
|
EN 1162 : 1996
|
FEATHER AND DOWN - TEST METHODS - DETERMINATION OF THE OXYGEN INDEX NUMBER |
|
DIN EN 14291:2005-02
|
Foam producing solutions for leak detection on gas installations; German version EN 14291:2004 |