ISO 4301-1 : 2016

Current

Current The latest, up-to-date edition.

Preview

CRANES - CLASSIFICATION - PART 1: GENERAL

Publisher: International Organization for Standardization

Published:

Available Formats: PDF - French, Hardcopy - French, PDF - English, Hardcopy - English
More Info on product formats

Table of Contents - (Show below) - (Hide below)

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Symbols
5 Use of classification
6 Classification of crane duty for the crane as a whole
7 Classification of components and mechanisms
Annex A (informative) - Examples for average displacements
Annex B (informative) - Guidance for the conversion of
M-classes
Bibliography

Abstract - (Show below) - (Hide below)

Describes a general classification of cranes and mechanisms based on the service conditions, mainly expressed by the following: - the total number of working cycles to be carried out during the specified design life of the crane; - the load spectrum factor which represents the relative frequencies of loads to be handled; and - the average displacements.

General Product Information - (Show below) - (Hide below)

Published
Document Type	Standard
Status	Current
Publisher	International Organization for Standardization
Pages
ISBN
Committee	TC 96
Supersedes	ISO/DIS 4301-1 : 50.60 (2016) ISO 4301-1 : 1986(R2014) ISO 4301 : 1980

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
IS 13834 : Part 1 : 2018	Identical
IS 14147 : Part 2 : 2018	Identical
BS ISO 4301-1 : 2016	Identical
UNI ISO 4301-1 : 1988	Identical
SANS 4301-1 : 1ED 2002(R2014)	Identical
BS ISO 4301-1 : 2016	Identical
UNE 58112-1 : 1991	Identical
NFE 52 110 : 80 FD	Similar to
PN ISO 4301-1 : 1998	Identical
IS 13834 : Part 1 : 2018	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

06/30147145 DC : 0	EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
ISO 20332 : 2016	CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
BS DD237(1996) : 1996	BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - CLASSIFICATION
ISO 8686-5 : 2017	CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
ISO 16881-1 : 2005(R2017)	CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
BS ISO 16881-1 : 2005	CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
14/30298206 DC : 0	BS EN 1570-2 - SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 2: LIFTING TABLES SERVING MORE THAN 2 FIXED LANDINGS OF A BUILDING, FOR LIFTING GOODS WITH A VERTICAL TRAVEL SPEED NOT EXCEEDING 0,15 M/S
12/30266226 DC : 0	BS ISO 16716 - CRANES - MONITORING FOR CRANE DESIGN LIFE
DIN 56950-1 E : 2012	ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTION
BS PD ISO/TR 19961 : 2010	CRANES - SAFETY CODE ON MOBILE CRANES
17/30325088 DC : 0	BS ISO 8686-3 - CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 3: TOWER CRANES
DIN ISO 4309 E : 2013	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD (ISO 4309:2010)
07/30169970 DC : DRAFT DEC 2007	BS ISO 4309:2004 - CRANES - WIRE ROPES - CODE OF PRACTICE FOR CARE AND MAINTENANCE, INSPECTION AND DISCARD
DIN ISO 4309 : 2013	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD (ISO 4309:2010)
DIN EN 1570-1 E : 2015	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
DIN 56950-1 : 2012	ENTERTAINMENT TECHNOLOGY - MACHINERY INSTALLATIONS - PART 1: SAFETY REQUIREMENTS AND INSPECTIONS
12/30253074 DC : 0	BS ISO 9374-3 - CRANES - INFORMATION TO BE PROVIDED FOR ENQUIRIES, ORDERS, OFFERS AND SUPPLY - PART 3: TOWER CRANES
BS ISO 12482 : 2014	CRANES - MONITORING FOR CRANE DESIGN WORKING PERIOD
04/19993045 DC : 0	EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
04/102834 DC : DRAFT JAN 2004	ISO 16881-1 - CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
97/713936 DC : DRAFT AUG 1997	PREN 13000 - CRANES - SAFETY - MOBILE CRANES
04/30122476 DC : 0	EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
00/707658 DC : DRAFT APR 2000	PREN 13852-2 - CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS ISO 8686-5 : 2017	CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
PREN 14492-1 : DRAFT 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
13/30275387 DC : 0	BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
03/106314 DC : 0	BS PQIR - CRANES - CONDITION MONITORING - PART 1: SPECIFICATION FOR DATA LOGGING EQUIPMENT
BS EN 1570-1 : 2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
ISO 9374-3 : 2014	CRANES - INFORMATION TO BE PROVIDED FOR ENQUIRIES, ORDERS, OFFERS AND SUPPLY - PART 3: TOWER CRANES
VDI 2485 : 2014	PLANNING OF MAINTENANCE FOR CRANES
12/30252148 DC : 0	BS ISO 17440 - CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
ISO 4301-3 : 1993(R2012)	CRANES - CLASSIFICATION - PART 3: TOWER CRANE
BS ISO 4308-1 : 2003	CRANES AND LIFTING APPLIANCES - SELECTION OF WIRE ROPES - PART 1: GENERAL
UNI ISO 4301-2 : 2011	CRANES - CLASSIFICATION - PART 2: MOBILE CRANES
02/710617 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS ISO 4309 : 2017	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
06/30110083 DC : 0	ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL
ISO/DIS 8686-5 : 50.20 (2017)	CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
BIS IS 14475-1 : 1997(R2008)	CRANES - CONDITION MONITORING - PART 1: GENERAL
08/30180969 DC : DRAFT APR 2008	BS EN 1570 - SAFETY REQUIREMENTS FOR LIFTING TABLES
CSA B354.5 : 2007	MAST-CLIMBING WORK PLATFORMS
BS ISO 17440 : 2014	CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
NF ISO 16881-1 : 2005	CRANES - DESIGN CALCULATION FOR RAIL WHEELS AND ASSOCIATED TROLLEY TRACK SUPPORTING STRUCTURE - PART 1: GENERAL
BS PD ISO/TR 25599 : 2006	CRANES - JIB CRANES - INTERNATIONAL STANDARDS FOR DESIGN, MANUFACTURING, USE AND MAINTENANCE REQUIREMENTS AND RECOMMENDATIONS
11/30242006 DC : DRAFT SEP 2011	BS ISO 16625 - CRANES AND HOISTS - SELECTION OF WIRE ROPES, DRUMS AND SHEAVES
BS ISO 16625 : 2013	CRANES AND HOISTS - SELECTION OF WIRE ROPES, DRUMS AND SHEAVES
06/30151043 DC : DRAFT JUN 2006	BS ISO 4301-2 - CRANES - CLASSIFICATION - PART 2: MOBILE CRANES
BS ISO 10972-1 : 1998	CRANES - REQUIREMENTS FOR MECHANISMS - GENERAL
CSA B354.5 : 2007 : R2016	MAST-CLIMBING WORK PLATFORMS
CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011	MAST-CLIMBING WORK PLATFORMS
CSA B354.5 : 2007 : INC : UPD 1 : 2008 : R2011	MAST-CLIMBING WORK PLATFORMS
ISO 3077 : 2001(R2017)	SHORT-LINK CHAIN FOR LIFTING PURPOSES - GRADE T, (TYPES T, DAT AND DT), FINE-TOLERANCE HOIST CHAIN
09/30187535 DC : 0	BS EN 13000 - CRANES - MOBILE CRANES
16/30335967 DC : 0	BS ISO 4309 - CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
CSA B354.5 : 2007	MAST-CLIMBING WORK PLATFORMS
ISO 16369 : 2007(R2017)	ELEVATING WORK PLATFORMS - MAST-CLIMBING WORK PLATFORMS
DIN EN 1570-1 : 2015	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
CSA B354.5 : 2007 : R2016	MAST-CLIMBING WORK PLATFORMS
ISO 4301-5 : 1991(R2015)	CRANES - CLASSIFICATION - PART 5: OVERHEAD TRAVELLING AND PORTAL BRIDGE CRANES
NF ISO 4309 : 2018	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
BS ISO 20332 : 2016	CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
I.S. 361:2013	CODE OF PRACTICE FOR THE SAFE USE OF TOWER CRANES AND SELF-ERECTING CRANES
I.S. EN 1570-1:2011	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
UNI ISO 4309 : 2011	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
UNE EN 1570-1 : 2012	SAFETY REQUIREMENTS FOR LIFTING TABLES - PART 1: LIFTING TABLES SERVING UP TO TWO FIXED LANDINGS
ISO 4308-1 : 2003	CRANES AND LIFTING APPLIANCES - SELECTION OF WIRE ROPES - PART 1: GENERAL
ISO 14518 : 2005(R2017)	CRANES - REQUIREMENTS FOR TEST LOADS
I.S. EN 13000:2010	CRANES - MOBILE CRANES
EN 13000 : 2010 + A1 2014	CRANES - MOBILE CRANES
ISO TR 19961 : 2010	CRANES - SAFETY CODE ON MOBILE CRANES
ISO 12482 : 2014	CRANES - MONITORING FOR CRANE DESIGN WORKING PERIOD
ISO 4301-2 : 2009(R2014)	CRANES - CLASSIFICATION - PART 2: MOBILE CRANES
ISO 4301-4 : 1989(R2017)	CRANES AND RELATED EQUIPMENT - CLASSIFICATION - PART 4: JIB CRANES
16/30341165 DC : 0	BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
15/30302889 DC : 0	BS EN 14492-1 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
ISO 17440 : 2014	CRANES - GENERAL DESIGN - LIMIT STATES AND PROOF OF COMPETENCE OF FORGED STEEL HOOKS
CSA B354.9 : 2017	DESIGN, CALCULATIONS, SAFETY REQUIREMENTS, AND TEST METHODS FOR MAST CLIMBING WORK PLATFORMS (MCWPS)
I.S. EN 15011:2011	CRANES - BRIDGE AND GANTRY CRANES
ISO 4309 : 2017	CRANES - WIRE ROPES - CARE AND MAINTENANCE, INSPECTION AND DISCARD
ISO 12482-1 : 1995	CRANES - CONDITION MONITORING - PART 1: GENERAL
ISO TR 25599 : 2005	CRANES - JIB CRANES - INTERNATIONAL STANDARDS FOR DESIGN, MANUFACTURING, USE AND MAINTENANCE REQUIREMENTS AND RECOMMENDATIONS
I.S. EN 14492-2:2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 14492-2 E : 2010	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 13000 : 2014	CRANES - MOBILE CRANES
DIN EN 14492-1 E : 2010	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
DIN EN 14010 E : 2009
DIN EN 1495 : 2009	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
DIN EN 818-7 E : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
DIN EN 14492-2 : 2016	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
DIN EN 13135-2 : 2011	CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
DIN EN 14492-1 : 2015	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
DIN EN 13000 E : 2014	CRANES - MOBILE CRANES
DIN EN 818-7 : 2008	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
DIN EN 14010 : 2009	SAFETY OF MACHINERY - EQUIPMENT FOR POWER DRIVEN PARKING OF MOTOR VEHICLES - SAFETY AND EMC REQUIREMENTS FOR DESIGN, MANUFACTURING, ERECTION AND COMMISSIONING STAGES
DIN EN 15011 : 2014	CRANES - BRIDGE AND GANTRY CRANES
BS EN 13135-2 : 2004	CRANES - EQUIPMENT - PART 2: NON-ELECTROTECHNICAL EQUIPMENT
BS EN 1495 : 1998	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
DIN EN 1495 E : 2009	LIFTING PLATFORMS - MAST CLIMBING WORK PLATFORMS
BS EN 13000 : 2010	CRANES - MOBILE CRANES
BS EN 14492-2 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
BS EN 815 : 1997	SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS
17/30357380 DC : 0	BS EN 15011 - CRANES - BRIDGE AND GANTRY CRANES
BS EN 818-7 : 2002	SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT)
BS EN 996 : 1996	PILING EQUIPMENT - SAFETY REQUIREMENTS
BS EN 14492-1 : 2006	CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES
BS EN 14010 : 2003
BS EN 15011 : 2011	CRANES - BRIDGE AND GANTRY CRANES
10/30218104 DC : 0	BS EN 15011 - CRANES - BRIDGE & GANTRY CRANES
UNE EN 13000 : 2010	CRANES - MOBILE CRANES
BS EN 1570 : 1999	SAFETY REQUIREMENTS FOR LIFTING TABLES

Standards Referencing This Book - (Show below) - (Hide below)

ISO 8686-1 : 2012(R2018)	CRANES - DESIGN PRINCIPLES FOR LOADS AND LOAD COMBINATIONS - PART 1: GENERAL
ISO 20332 : 2016	CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES

Add To Cart

Product Format

Quantity

add to cart

ISO 4301-1 : 2016

Table of Contents - (Show below) - (Hide below)

Abstract - (Show below) - (Hide below)

General Product Information - (Show below) - (Hide below)

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Standards Referenced By This Book - (Show below) - (Hide below)

Standards Referencing This Book - (Show below) - (Hide below)

Add To Cart

Publisher

Category

Sub Category

Access your standards online with a subscription?