• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 4589-2:2017

Current
Current

The latest, up-to-date edition.

Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English

Published date

12-04-2017

ISO 4589-2:2017 specifies methods for determining the minimum volume fraction of oxygen, in admixture with nitrogen, that will support combustion of small vertical test specimens under specified test conditions. The results are defined as oxygen index (OI) values.

Methods are provided for testing materials that are self-supporting in the form of vertical bars or sheets up to 10,5 mm thick. These methods are suitable for solid, laminated or cellular materials characterized by an apparent density 100 kg/m3 or greater. The methods might also be applicable to some cellular materials having an apparent density of less than 100 kg/m3. A method is provided for testing flexible sheets or film materials while supported vertically.

For comparative purposes, a procedure is provided for determining whether or not the OI of a material lies above some specified minimum value.

DevelopmentNote
Supersedes ISO 4589 (04/2001) Supersedes ISO/DIS 4589-2. (04/2017)
DocumentType
Standard
Pages
30
PublisherName
International Organization for Standardization
Status
Current
Supersedes

DIN EN ISO 25137-2 E : 2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 7792-2:2012 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
14/30304058 DC : 0 BS EN ISO 17855-2 - PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 23559:2007 Plastics Film and sheeting Guidance on the testing of thermoplastic films
16/30319046 DC : 0 BS EN ISO 4589-3 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST
16/30334902 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
10/30216687 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS ISO 20753 : 2008 PLASTICS - TEST SPECIMENS
02/121749 DC : DRAFT APR 2002 PREN 438-4 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
08/30170332 DC : DRAFT JAN 2008 BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNE-EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DIN EN ISO 20028-2 E : 2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
12/30243465 DC : 0 BS ISO/IEC 80079-38 - EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES
CEI 89-38 : 2014 FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE CHARACTERISTIC HEAT FLUX FOR IGNITION FROM A NON-CONTACTING FLAME SOURCE
04/30115317 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
UNE-EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS EN ISO 10350-1:2017 Plastics. Acquisition and presentation of comparable single-point data Moulding materials
DIN EN ISO 20753 E : 2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
I.S. EN 62329-2:2006 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
DIN EN ISO/IEC 80079-38:2012-08 (Draft) EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
DIN EN ISO 20753:2014-07 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
DIN EN ISO 4613-2:2004-12 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3673-2 E : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN ISO 4589-1 E : 1999 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
BS EN ISO 1622-2:1999 Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 15001:2011 Anaesthetic and respiratory equipment. Compatibility with oxygen
BS EN ISO 3167:2014 Plastics. Multipurpose test specimens
BS EN ISO 7391-2:2006 Plastics. Polycarbonate (PC) moulding and extrusion materials Preparation of test specimens and determination of properties
DIN EN ISO 1872-2:2000-12 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 12215-2:2002-09 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
DIN EN 562:2003-09 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
DIN EN ISO 4589-3:2017-08 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
DEFSTAN 93-111/1(2004) : 2004 FIBRE REINFORCED POLYMER COMPOSITE FOR BALLISTIC PROTECTION PURPOSES
ONORM EN ISO 11542-2 : 2009 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
BS ISO 15001 : 2003 AMD 15145 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
16/30319040 DC : 0 BS EN ISO 4589-1 - PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GUIDANCE
07/30165210 DC : 0 BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
07/30173191 DC : 0 BS ISO 5171 - GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
12/30266170 DC : 0 BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
07/30169693 DC : 0 BS EN 60695-11-11 - FIRE HAZARD TESTING - PART 11-11: TEST FLAMES - DETERMINATION OF THE IGNITION CHARACTERISTIC HEAT FLUX FROM A NON-CONTACTING FLAME SOURCE
05/30132990 DC : DRAFT APR 2005 ISO 20753 - PLASTICS - TEST SPECIMENS
BS ISO 25137-2 : 2009 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
DEFSTAN 61-12(PT31)/2(2006) : 2006 WIRES, CORDS AND CABLES, ELECTRICAL - METRIC UNITS - PART 31: SHEATHS - LIMITED FIRE HAZARD
BS EN 15534-1 : 2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
02/565097 DC : DRAFT DEC 2002 BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS
DIN EN ISO 19069-2:2016-07 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
BS ISO 2897-2 : 1994 AMD 10661 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 7391-2 : 1996 AMD 10746 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
DIN EN ISO 17855-2 E : 2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
NF EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
PD IEC/TR 62757:2015 Fire prevention measures on converters for high-voltage direct current (HVDC) systems, static var compensators (SVC) and flexible ac transmission systems (FACTS) and their valve halls
I.S. EN ISO 7391-2:2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN ISO 7391-2 : 2006 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
NF EN ISO 5171 : 2010 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
UNE-EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
UNE-EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
ISO 17398:2004 Safety colours and safety signs — Classification, performance and durability of safety signs
S.R. CEN/TS 45545-2:2009 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DIN EN ISO 8986-2 E : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 10350-2:2011-06 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
DIN EN ISO 4589-3 E : 2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
DIN EN ISO 4589-3:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN ISO 4589-1:2016-03 (Draft) PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
BS EN ISO 4894-2:1999 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1995 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004 Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
PD IEC/TR 60695-1-21:2008 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
ISO 19069-2:2016 Plastics — Polypropylene (PP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
BS EN ISO 1872-2:2007 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
I.S. EN ISO 15526-2:2004 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 4589-1:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
DIN EN ISO 7391-2:2006-06 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 3167:2014 PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
NF EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 15001:2011 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN (ISO 15001:2010)
I.S. EN ISO 4894-2:1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
I.S. EN ISO 3673-2:2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS (ISO 3673-2:2012)
I.S. EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 1873-2:2000-12 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15526-2:2004-10 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11542-2:1998/AC:2008 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
AEP-33 : B GUIDE TO METHODS OF TEST FOR THE COMPATIBILITY OF MATERIALS USED IN OXYGEN-ENRICHED ENVIRONMENTS
BS EN ISO 25137-2:2017 Plastics. Sulfone polymer moulding and extrusion materials Preparation of test specimens and determination of properties
14/30304062 DC : 0 BS EN ISO 19069-2 - PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 23559:2011 Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
BS EN ISO 17855-2:2016 Plastics. Polyethylene (PE) moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 2580-2 : 94 AMD 10660 PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
BS 7825-3.9:1998 Calibration of rubber and plastics test equipment. Calibration schedules Flammability characteristics
BS EN 60684-2:2011 Flexible insulating sleeving Methods of test
BS EN 62329-2:2006 Heat shrinkable moulded shapes Methods of test
BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
ISO 5171:2009 Gas welding equipment Pressure gauges used in welding, cutting and allied processes
BS ISO 1622-2 : 1995 AMD 10649 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
ASTM G 125 : 2000 : R2008 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
I.S. EN ISO 17855-2:2016 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
I.S. EN ISO 25137-2:2017 PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
BS EN ISO 20753:2014 Plastics. Test specimens
ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
EN ISO 7391-2:2006 Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006)
EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
EN ISO/IEC 80079-38:2016 Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
I.S. EN ISO 8986-2:2009 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 15001:2012-06 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
BS EN 60695-1-21:2016 Fire hazard testing Guidance for assessing the fire hazard of electrotechnical products. Ignitability. Summary and relevance of test methods
IEC 62329-2:2006 Heat-shrinkable moulded shapes - Part 2: Methods of test
BS EN ISO 3673-2:2012 Plastics. Epoxy resins Preparation of test specimens and determination of properties of crosslinked epoxy resins
ISO 17855-2:2016 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index Elevated-temperature test
ISO 1163-2:1995 Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 3673-2:2012-10 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
BS EN ISO 10350-2:2011 Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
UNI EN ISO 10350-2 : 2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
ONORM EN ISO 10350-2 : 2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
I.S. EN ISO 10350-2:2011 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNI EN ISO 3167 : 2014 PLASTICS - MULTIPURPOSE TEST SPECIMENS
UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN ISO 3673-2 : 2012 PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES OF CROSSLINKED EPOXY RESINS
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
UNI EN ISO 7792-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN 16028 : 2013 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 8986-2 : 2010 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN ISO 15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
CEI EN 62329-2 : 2007 HEAT SHRINKABLE MOULDED SHAPES - PART 2: METHODS OF TEST
BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
BS ISO 4589-1 : 96 AMD 10629 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - GUIDANCE
DIN EN ISO/IEC 80079-38 E : 2017 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079-38:2016)
ISO 20753:2008 Plastics Test specimens
BS ISO 7792-2 : 1997 AMD 15252 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN ISO 1873-2:2007 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 562:2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
I.S. EN 60684-2:2011 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST (IEC 60684-2:2011)
I.S. EN ISO 1872-2:2007 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30242905 DC : 0 BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS EN ISO 20028-2:2017 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
UNI CEI CEN/TS 45545-2 : 2009 RAILWAY APPLICATIONS - FIRE PROTECTION OF RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) Characterisation of WPC materials
03/118818 DC : DRAFT DEC 2003 BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 17398:2004 Safety colours and safety signs. Classification, performance and durability of safety signs
BS EN ISO 19069-2:2016 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
BS ISO 10366-2 : 94 AMD 10665 PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA Z15001 : 2012 ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN
CAN/CSA-Z15001:12 (R2017) Anaesthetic and respiratory equipment - Compatibility with oxygen (Adopted ISO 15001:2010, second edition, 2010-06-01, with Canadian deviations)
15/30304408 DC : 0 BS EN ISO 20029-2 - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 15534-1:2014 COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS
DD CEN/TS 45545-2:2009 Railway applications. Fire protection on railway vehicles Requirements for fire behaviour of materials and components
BS EN ISO/IEC 80079-38 : 2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC 80079 38:2016)
AFAP-1 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS
UNI EN ISO 20753 : 2014 PLASTICS - TEST SPECIMENS
I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
ISO/IEC 80079-38:2016 Explosive atmospheres Part 38: Equipment and components in explosive atmospheres in underground mines
I.S. EN ISO/IEC 80079-38:2016 EXPLOSIVE ATMOSPHERES - PART 38: EQUIPMENT AND COMPONENTS IN EXPLOSIVE ATMOSPHERES IN UNDERGROUND MINES (ISO/IEC/DIS 80079-38:2012)
DIN EN ISO 20028-2:2015-08 (Draft) PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
BS EN ISO 5171:2010 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
EN ISO 20753:2014 PLASTICS - TEST SPECIMENS (ISO 20753:2008)
IEC TS 60695-11-11:2016 Fire hazard testing - Part 11-11: Test flames - Determination of the characteristic heat flux for ignition from a non-contacting flame source
S.R. CEN/TS 15534-2:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS
IEC TR 60695-1-21:2008 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
UNE-EN ISO 14910-2:2014 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
DIN EN ISO 11542-2:2010-01 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
UNE-EN ISO 7792-2:2013 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
DIN EN ISO 14910-2 E : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
DIN EN ISO 3167:2014-11 PLASTICS - MULTIPURPOSE TEST SPECIMENS (ISO 3167:2014)
02/124520 DC : DRAFT DEC 2002 EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS
BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
ISO 1873-2:2007 Plastics Polypropylene (PP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 1873-2:2007 Plastics. Polypropylene (PP) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 20028-2:2017 Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 4589-1:2017 Plastics. Determination of burning behaviour by oxygen index General requirements
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
UNE-EN ISO 5171:2011 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
IEC 60695-1-21:2016 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
ISO 15001:2010 Anaesthetic and respiratory equipment Compatibility with oxygen
ISO 4894-2:1995 Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 14529-2:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
IEC 60684-2:2011 Flexible insulating sleeving - Part 2: Methods of test
UNE-EN ISO 10350-2:2011 Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011)
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
ISO 7792-2:2012 Plastics Thermoplastic polyester (TP) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 4589-3:2017 Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
ISO 1622-2:1995 Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 25137-2:2009 Plastics Sulfone polymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 11542-2:1998 Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3167:2014 Plastics Multipurpose test specimens
ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 8986-2:2009 Plastics Polybutene-1 (PB-1) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 4589-1:2017 Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements
ISO 3673-2:2012 Plastics — Epoxy resins — Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
UNE-EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
UNE-EN ISO 4589-3:2017 Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
EN ISO 1163-2 : 1999 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 8986-2:2009 Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009)
EN ISO 19069-2:2016 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2016)
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN ISO 1873-2:2007 Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 4613-2:1995/A1:2004 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 3167:2014 Plastics - Multipurpose test specimens (ISO 3167:2014)
EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 4589-1:2017 Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)
EN ISO 14530-2 : 1999 PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 5171:2010 Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009)
EN ISO 14528-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 20028-2:2017 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 20028-2:2017)
EN ISO 4894-2 : 1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 1622-2 : 1999 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 17855-2:2016 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 17855-2:2016)
EN ISO 1872-2:2007 Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
EN ISO 4589-3:2017 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
EN ISO 3673-2:2012 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
EN ISO 14910-2:2013 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties (ISO 14910-2:2013, Corrected version 2015-12-15)
EN ISO 15001:2011 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN 562 : 2003 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
EN ISO 7792-2:2012 Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012)
EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 25137-2:2017 Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009)
DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
I.S. EN ISO 10350-1:2017 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
I.S. EN 60695-1-21:2016 FIRE HAZARD TESTING - PART 1-21: GUIDANCE FOR ASSESSING THE FIRE HAZARD OF ELECTROTECHNICAL PRODUCTS - IGNITABILITY - SUMMARY AND RELEVANCE OF TEST METHODS
CEI EN 60684-2 : 2012 FLEXIBLE INSULATING SLEEVING - PART 2: METHODS OF TEST
ASTM G 125 : 2000 : R2015 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
DIN EN ISO 17855-2:2016-06 PLASTICS - POLYETHYLENE (PE) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 17855-2:2016)
BS ISO 10931-1:1997 Plastics piping systems for industrial applications. Poly (vinylidene fluoride) General
DIN EN ISO 19069-2 E : 2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
I.S. EN ISO 19069-2:2016 PLASTICS - POLYPROPYLENE (PP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 19069-2:2016)
04/30113213 DC : 0 EN 14591-3 - EXPLOSION PROTECTION IN UNDERGROUND MINING - PROTECTIVE SYSTEMS - PART 3: WATER TROUGHS FOR EXPLOSION BARRIERS
BS ISO 1268-8:2004 Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
15/30304402 DC : 0 BS EN ISO 20028-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
02/121751 DC : DRAFT APR 2002 PREN 438-6 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEET BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 6: CLASSIFICATION AND SPECIFICATIONS FOR EXTERIOR-GRADE COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
ONORM EN ISO 14910-2 : 2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
I.S. EN ISO 14910-2:2013 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013, CORRECTED VERSION 2015-12-15)
I.S. EN ISO 20028-2:2017 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 20028-2:2017)
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
DIN EN ISO 25137-2:2016-08 (Draft) PLASTICS - SULFONE POLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 25137-2:2009)
UNI EN ISO 5171 : 2010 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
ISO 14910-2:2013 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
DIN EN ISO 5171:2010-07 GAS WELDING EQUIPMENT - PRESSURE GAUGES USED IN WELDING, CUTTING AND ALLIED PROCESSES
UNE-EN ISO 20753:2015 Plastics - Test specimens (ISO 20753:2008)
ISO 7391-2:2006 Plastics Polycarbonate (PC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ASTM G 125 : 2000 Standard Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
DIN EN ISO 7792-2:2013-03 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 7792-2:2012)
BS EN ISO 1163-2:2000 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 8986-2:2009 Plastics. Polybutene-1 (PB-1) moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 60695-1-21:2017 Fire hazard testing - Part 1-21: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - Summary and relevance of test methods
UNE-EN ISO 15001:2012 Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)
BS EN ISO 14910-2:2013 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
ISO 15252-2:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 1872-2:2007 Plastics Polyethylene (PE) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN ISO 3673-2:2013 Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
ISO 14527-2:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7792-2:2012 Plastics. Thermoplastic polyester (TP) moulding and extrusion materials Preparation of test specimens and determination of properties
ISO 15526-2:2000 Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 562:2003 Gas welding equipment. Pressure gauges used in welding, cutting and allied processes
BS EN ISO 14530-2:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 15252-2:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
DIN EN ISO 4589-1:1999-09 PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 1: GENERAL REQUIREMENTS (ISO 4589-1:2017)
DIN EN ISO 14910-2:2013-06 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 14910-2:2013)
CEN/TS 45545-2:2009 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
EN 62329-2:2006 Heat shrinkable moulded shapes - Part 2: Methods of test
DIN EN ISO 8986-2:2010-04 PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials

ISO 3582:2000 Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
ISO 3167:2014 Plastics Multipurpose test specimens
ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
ISO 294:1995 Plastics Injection moulding of test specimens of thermoplastic materials
ISO 13943:2017 Fire safety — Vocabulary
ISO 2859-2:1985 Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725:1986 Precision of test methods Determination of repeatability and reproducibility for a standard test method by inter-laboratory tests
ISO 2818:1994 Plastics — Preparation of test specimens by machining
ISO 4589-1:2017 Plastics — Determination of burning behaviour by oxygen index — Part 1: General requirements

View more information
£139.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.