ISO 4677-1:1985

Withdrawn

Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

14-02-2019

Language(s)

English, French

Published date

17-10-1985

Publisher

International Organization for Standardization

The method specified applies for temperatures within the range from 5 to 80 C. The property is determined with an uncertainty either not exceeding 3 % r. h. or not exceeding 3 % r. h., depending on the uncertainty in the value obtained for the wet-bulb temperature depression and on whether or not the dry-bulb temperature exceeds 40 C.

DocumentType	Standard
Pages	10
PublisherName	International Organization for Standardization
Status	Withdrawn

Standards	Relationship
NFX 15 118 : 1996	Similar to
UNE 7523-1:1997	Similar to

BS EN 62282-3-200:2016	Fuel cell technologies Stationary fuel cell power systems. Performance test methods
16/30296842 DC : 0	BS ISO 17168-3 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 3: REMOVAL OF TOLUENE
BS EN 60068-3-6:2002	Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers
DIN ISO 15592-2:2005-05	Fine-cut tobacco and smoking articles made from it - Methods of sampling, conditioning and analysis - Part 2: Atmosphere for conditioning and testing (ISO 15592-2:2001)
06/30159593 DC : 0	BS ISO/IEC 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS EN 61631:2001	Test method for the mechanical strength of cores made of magnetic oxides
08/30152625 DC : DRAFT APR 2008	BS ISO 16110-2 - HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 2: PROCEDURES TO DETERMINE EFFICIENCY
16/30296845 DC : 0	BS ISO 17168-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 4: REMOVAL OF FORMALDEHYDE
BS ISO 15592-2:2001	Fine-cut tobacco and smoking articles made from it. Methods of sampling, conditioning and analysis Atmosphere for conditioning and testing
INCITS/ISO/IEC 15457-3 : 2002 : R2007	IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
PREN 14425-3 : DRAFT 2009	ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
ISO 22197-2:2011	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 2: Removal of acetaldehyde
I.S. EN 62282-6-200:2017	FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
I.S. EN 62282-3-2:2006	FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
I.S. EN 14425-3:2010	ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
I.S. EN 62282-3-200:2016	FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
BS ISO 22197-1:2016	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of nitric oxide
ISO 22197-3:2011	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 3: Removal of toluene
BS ISO 22197-3:2011	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of toluene
NF EN 60068-3-6 : 2002	ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
11/30239716 DC : 0	BS EN 16242 - CONSERVATION OF CULTURAL PROPERTY - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
UNE-EN ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN 14425-3:2010	Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
NF EN 61631 : 2005	TEST METHOD FOR THE MECHANICAL STRENGTH OF CORES MADE OF MAGNETIC OXIDES
EN 60068-3-6:2002	Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers
EN 62282-3-200:2016	Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
ISO 16311-4:2014	Maintenance and repair of concrete structures — Part 4: Execution of repairs and prevention
14/30280137 DC : 0	BS EN 62282-3-200 ED 2.0 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
11/30246729 DC : 0	BS EN 62282-6-200 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
BS EN 16242:2012	Conservation of cultural heritage. Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
CSA ISO/IEC 15457-3 : 2009 : R2014	IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS 1339-3:2004	Humidity Guide to the measurement of humidity
PD IEC/TS 62282-7-2:2014	Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC)
03/305320 DC : DRAFT MAY 2003	BS 1339 - HUMIDITY - PART 3: GUIDE TO THE MEASUREMENT OF HUMIDITY
08/19979365 DC : DRAFT FEB 2008	BS ISO 15928-3 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 3: STRUCTURAL DURABILITY
DD ENV 12923-2:2001	Advanced technical ceramics. Monolithic ceramics Oxidation test
DIN ISO 22197-1 E : 2016	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007)
DIN EN 16242:2013-03	CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
ISO 187:1990	Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
I.S. EN ISO 8502-4:2017	PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINES - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017)
I.S. EN 843-1:2006	ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH
I.S. EN 16242:2012	CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
BS 5743:2000	Tobacco and tobacco products. Atmosphere for conditioning and testing
BS EN 62282-6-200:2012	Fuel cell technologies Micro fuel cell power systems. Performance test methods
14/30250134 DC : 0	BS EN ISO 8502-4 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION
CEI EN 60068-3-6 : 2002	ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
10/30173701 DC : 0	BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
BS ISO 22197-4:2013	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of formaldehyde
BS ISO 4524-2:2000	Metallic coatings. Test methods for electrodeposited gold and gold alloy coatings Mixed flowing gas (MFG) environmental tests
15/30323590 DC : 0	BS ISO 22197-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE
UNE-ISO 22197-1:2012	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials. Part 1: Removal of nitric oxide
09/30181336 DC : DRAFT AUG 2009	BS ISO 22197-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 2: REMOVAL OF ACETALDEHYDE
16/30296833 DC : 0	BS ISO 17168-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 5: REMOVAL OF METHYL MERCAPTAN
UNE-EN 62282-6-200:2013	Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
BS ISO/IEC 15457-3:2008	Identification cards. Thin flexible cards Test methods
09/30208469 DC : 0	BS EN 14425-3 - ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
BS EN 14425-3:2010	Advanced technical ceramics. Test methods for determination of fracture toughness of monolithic ceramics Chevron notched beam (CNB) method
ISO 16345:2014	Water-cooling towers — Testing and rating of thermal performance
IEC 62282-3-200:2015	Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods
IEC 62282-6-200:2016	Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
IEC TR 62866:2014	Electrochemical migration in printed wiring boards and assemblies - Mechanisms and testing
ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
EN 61631:2001	Test method for the mechanical strength of cores made of magnetic oxides
UNI EN 1504-10 : 2005	PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS
UNI EN 16242 : 2013	CONSERVATION OF CULTURAL HERITAGE - PROCEDURES AND INSTRUMENTS FOR MEASURING HUMIDITY IN THE AIR AND MOISTURE EXCHANGES BETWEEN AIR AND CULTURAL PROPERTY
IEC 61631:2001	Test method for the mechanical strength of cores made of magnetic oxides
11/30199652 DC : 0	BS ISO 22197-4 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 4: REMOVAL OF FORMALDEHYDE
I.S. EN 843-3:2005	ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 3: DETERMINATION OF SUBCRITICAL CRACK GROWTH PARAMETERS FROM CONSTANT STRESSING RATE FLEXURAL STRENGTH TESTS
BS 7079-B4(1993) : AMD 10700	PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - GUIDE TO THE ESTIMATION OF THE PROBABILITY OF CONDENSATION OF A SURFACE TO BE PAINTED
04/30125782 DC : DRAFT NOV 2004	EN 843-1 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - MECHANICAL PROPERTIES AT ROOM TEMPERATURE - PART 1: DETERMINATION OF FLEXURAL STRENGTH
BS ISO 16345:2014	Water-cooling towers. Testing and rating of thermal performance
06/30156520 DC : DRAFT SEP 2006	BS ISO 22197-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - REMOVAL OF NITRIC OXIDE
00/122905 DC : DRAFT JULY 2000	BS 1339-3 - GUIDE TO THE MEASUREMENT OF HUMIDITY
09/30181339 DC : DRAFT AUG 2009	BS ISO 22197-3 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 3: REMOVAL OF TOLUENE
BS EN 62282-3-2:2006	Fuel cell technologies Stationary fuel cell power systems. Performance test methods
CSA ISO/IEC 15457-3:09 (R2019)	Identification cards - Thin flexible cards - Part 3: Test methods (Adopted ISO/IEC 15457-3:2008, second edition, 2008-03-01)
16/30296848 DC : 0	BS ISO 17168-1 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 1: REMOVAL OF NITRIC OXIDE
NF EN 14425-3 : 2010	ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD
UNE-ISO 15592-2:2012	Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing
I.S. EN 60068-3-6:2002	ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS
INCITS/ISO/IEC 15457-3 : 2002	IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
BS ISO 22197-2:2011	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of acetaldehyde
ISO/IEC 15457-3:2008	Identification cards — Thin flexible cards — Part 3: Test methods
DIN EN ISO 8502-4:2014-06 (Draft)	PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017)
BS EN 843-1:2006	Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of flexural strength
BS EN 20187:1993	Paper, board and pulps. Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
PD IEC/TR 62866:2014	Electrochemical migration in printed wiring boards and assemblies. Mechanisms and testing
BS EN 843-3:2005	Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
UNE-EN 16242:2014	Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
BS EN ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Guidance on the estimation of the probability of condensation prior to paint application
DIN EN ISO 8502-4:2017-05	PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF CONDENSATION PRIOR TO PAINT APPLICATION (ISO 8502-4:2017)
EN 20187:1993	Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
EN ISO 8502-4:2017	Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 4: Guidance on the estimation of the probability of condensation prior to paint application (ISO 8502-4:2017)
EN 843-3:2005	Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
EN 16242:2012	Conservation of cultural heritage - Procedures and instruments for measuring humidity in the air and moisture exchanges between air and cultural property
EN 843-1:2006	Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
16/30296839 DC : 0	BS ISO 17168-2 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - PART 2: REMOVAL OF ACETALDEHYDE
11/30199655 DC : 0	BS ISO 22197-5 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 5: REMOVAL OF METHYL MERCAPTAN
17/30300673 DC : 0	BS ISO 19652 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR COMPLETE DECOMPOSITION PERFORMANCE OF SEMICONDUCTING PHOTO CATALYTIC MATERIALS UNDER INDOOR LIGHTING ENVIRONMENT - DECOMPOSITION OF ACETALDEHYDE
DD ENV 843-3:1997	Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
BS ISO 22197-5:2013	Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for air-purification performance of semiconducting photocatalytic materials Removal of methyl mercaptan
15/30301708 DC : 0	BS EN 62282-6-200 ED 3.0 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
01/648266 DC : DRAFT MAY 2001	ISO/IEC FCD 15457-3 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
CSA ISO/IEC 15457-3 : 2009	IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 3: TEST METHODS
ISO 4524-2:2000	Metallic coatings Test methods for electrodeposited gold and gold alloy coatings Part 2: Mixed flowing gas (MFG) environmental tests
ISO 22197-5:2013	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 5: Removal of methyl mercaptan
ISO 22197-4:2013	Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for air-purification performance of semiconducting photocatalytic materials Part 4: Removal of formaldehyde
IEC 62282-3-2:2006	Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
DIN ISO 22197-1:2016-04	FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR AIR-PURIFICATION PERFORMANCE OF SEMICONDUCTING PHOTOCATALYTIC MATERIALS - PART 1: REMOVAL OF NITRIC OXIDE (ISO 22197-1:2007)
EN 62282-3-2:2006	Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods
DIN EN 14425-3:2010-11	Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 3: Chevron notched beam (CNB) method
DIN EN 843-3:2005-08	Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests
EN 62282-6-200:2017	Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
DIN EN 843-1:2008-08	Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength