Laboratory sintered (fritted) filters — Porosity grading, classification and designation

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-10-1980

Publisher

International Organization for Standardization

Filters are graded according to their pore size index in one of the eight classes specified. This is applicable to laboratory filters made of glass, vitreous silica, ceramics, metals and plastic materials. Annex A specifies a method for determination of pore size index. Annex B and C concern with a procedure for assessing uniformity of filters and for determination of air permeability.

Committee	ISO/TC 48
DevelopmentNote	Also numbered as BS 1752(1983). (06/2005)
DocumentType	Standard
Pages	7
PublisherName	International Organization for Standardization
Status	Current

Standards	Relationship
PN 90/B-13045.02 : 1990	Identical
UNE 43343:1985	Identical
PN 89/B-13045.01 : 1989	Identical
NEN ISO 4793 : 1981	Identical
UNI ISO 4793 : 1984	Identical
IS 12305 : 2018	Identical

DIN ISO 11262 E : 2012	SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE (ISO 11262:2011)
ISO 1628-4:1999	Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 4: Polycarbonate (PC) moulding and extrusion materials
09/30201918 DC : 0	BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
BS EN ISO 10769:2011	Clay geosynthetic barriers. Determination of water absorption of bentonite
DIN ISO 6414:1984-02	TECHNICAL DRAWINGS FOR GLASSWARE
BS 5766-23:2001	Methods for analysis of animal feeding stuffs Determination of crude fibre content. Method with intermediate filtration
BS 2774(1983) : 1983 AMD 8620	SPECIFICATION FOR DRAWING CONVENTIONS FOR LABORATORY GLASS APPARATUS
I.S. EN 14035-35:2004	FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
BS EN 60422:2013	Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
13/30280257 DC : 0	BS ISO 6101-3 - RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION SPECTROMETRY - PART 3: DETERMINATION OF COPPER CONTENT
BS ISO 150 : 2006 AMD 17093	RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
BS 7825-3.1:1997	Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties
BS ISO 11667 : 1997 AMD 10676	FIBRE REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCEMENT-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
BS ISO 11262:2011	Soil quality. Determination of total cyanide
08/30184575 DC : DRAFT JUNE 2008	BS EN ISO 787-7 - GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
DIN EN ISO 787-7:2010-02	General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
I.S. EN ISO 4619:2010	DRIERS FOR PAINTS AND VARNISHES
BS 2782-1.130D(1993) : 1993 AMD 13567	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE POTENTIOMETRIC METHOD
17/30349869 DC : 0	BS ISO 20596-1 - WATER QUALITY - DETERMINATION OF CYCLIC VOLATILE METHYLSILOXANES IN WATER - PART 1: METHOD USING PURGE AND TRAP WITH GAS CHROMATOGRAPHY-MASS SPECTROMETRY (GC-MS)
BS ISO 6741-3:1987	Textiles. Fibres and yarns. Determination of commercial mass of consignments Specimen cleaning procedures
03/100561 DC : DRAFT JULY 2003	IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
97/700600 DC : DRAFT JAN 1997	PREN 3839 - AEROSPACE SERIES - ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL
02/122382 DC : DRAFT JUN 2002	PREN 14456 - PRODUCTS USED FOR TREATMENT WATER INTENDED FOR HUMAN CONSUMPTION - BONE CHARCOAL
DIN EN 1650:2013-08	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
BS 7164-25:1990	Chemical tests for raw and vulcanized rubber Method for determination of sulphide sulphur content
PREN 4503 : 200P1	AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
ISO 699:2015	Pulps Determination of alkali resistance
ISO 16000-14:2009	Indoor air Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
I.S. EN 16339:2013	AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING
I.S. EN 24938:1991	STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:1988)
I.S. EN ISO 150:2007	RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
NF ISO 16000-14 : 2009	INDOOR AIR - PART 14: DETERMINATION OF TOTAL (GAS AND PARTICLEPHASE) POLYCHLORINATED DIOXIN-LIKE BIPHENYLS (PCBS) AND POLYCHLORINATED DIBENZO-P-DIOXINS/DIBENZOFURANS (PCDDS/PCDFS) - EXTRACTION, CLEAN-UP AND ANALYSIS BY HIGH-RESOLUTION GAS CHROMATOGRAPHY AND MASS SPECTROMETRY
I.S. EN 16438:2014	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
NF EN 24938 : 1990	STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD
UNE-ISO 1628-4:2013	Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
ADA 6 : 1985(R2005)	DENTAL MERCURY
I.S. EN ISO 10769:2011	CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
EN ISO 150:2007	Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2006)
ISO 6414:1982	Technical drawings for glassware
UNI EN 12353 : 2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - PRESERVATION OF TEST ORGANISMS USED FOR THE DETERMINATION OF BACTERICIDAL (INCLUDING LEGIONELLA), MYCOBACTERICIDAL, SPORICIDAL, FUNGICIDAL AND VIRUCIDAL (INCLUDING BACTERIOPHAGES) ACTIVITY
BS EN 12353:2013	Chemical disinfectants and antiseptics. Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
BS EN ISO 182-2:2000	Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures pH method
BS EN ISO 12224-1:1998	Solder wire, solid and flux cored. Specification and test methods Classification and performance requirements
UNE-EN ISO 14184-1:2011	Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
BS EN 14035-35:2004	Fireworks Throwdowns. Specification and test methods
ISO 3262-2:1998	Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate)
BS EN ISO 3262-2:1998	Extenders for paints. Specifications and methods of test Barytes (natural barium sulfate)
BS EN 1164:1999	Feather and down. Test methods. Determination of the turbidity of an aqueous extract
BS EN ISO 1172:1999	Textile-glass-reinforced plastics. Prepregs, moulding compounds and laminates. Determination of the textile-glass and mineral-filler content. Calcination methods
DIN EN 14035-35:2005-02	FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
I.S. EN 12606-2:2000	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION
EN 12592:2014	Bitumen and bituminous binders - Determination of solubility
DIN ISO 11235:2006-07	RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS
EN 13624:2013	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
DIN ISO 4619:2002-04	DRIERS FOR PAINTS AND VARNISHES
BS 4227:1986	Specification for dental mercury
EN 1163:1996	Feather and down - Test methods - Determination of the oil and fat content
EN 1948-4:2010+A1:2013	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
EN 61125:1993/A1:2004	UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
EN 12386:2012	Chemicals used for treatment of water intended for human consumption - Copper sulfate
EN 12174:2013	Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
EN 12485:2017	Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime - Test methods
EN 1165:1996	Feather and down - Test methods - Determination of water-soluble chlorides
I.S. EN ISO 3262-3:1999	EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BLANC FIXE
DEFSTAN 68-113/2(2012) : 2012	SILICON, POWDERED
DEFSTAN 68-83/2(2012) : 2012	SULFUR
DEFSTAN 13-81/3(2013) : 2013	CALCIUM SILICIDE, SIZES 100, 200, 240
I.S. EN ISO 3262-2:1999	EXTENDERS FOR PAINTS - SPECIFICATIONS AND METHODS OF TEST - BARYTE (NATURAL BARIUM SULFATE)
DEFSTAN 13-128/2(2013) : 2013	BORON, AMORPHOUS, GRADES 1 AND 2
DEFSTAN 68-43/3(2013) : 2013	ZINC OXIDE
DEFSTAN 13-123/2(2012) : 2012	ACAROID RESIN
DEFSTAN 13-70/3(2013) : 2013	SODIUM NITRATE, GRADE 1
DEFSTAN 68-211/2(2009) : 2009	PHOSPHORUS AMORPHOUS
I.S. EN ISO 1172:1999	TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
DEFSTAN 68-265/2(2009) : 2009	AMMONIUM PERCHLORATE, LF QUALITY
DEFSTAN 13-52/3(2012) : 2012	BISMUTH (3) OXIDE
DEFSTAN 68-77/2(2013) : 2013	CALCIUM OXALATE MONOHYDRATE
DEFSTAN 13-168/2(2013) : 2013	COMPOSITION SR 214
DEFSTAN 13-166/2(2013) : 2013	GUNPOWDER, SULFURLESS - TYPES: SFG 12, SFG 20, SFG 40, SFG 90 AND SMP
DEFSTAN 68-44/3(2013) : 2013	GUM ACACIA
DEFSTAN 68-80/2(2013) : 2013	POTASSIUM PERCHLORATE
DEFSTAN 13-85/3(2013) : 2013	LACTOSE (MONOHYDRATE) - SIZE 72, SIZE 120, SIZE 170
PREN 13697 : DRAFT 2012	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
DIN ISO 4619 E : 2002	DRIERS FOR PAINTS AND VARNISHES
13/30280260 DC : 0	BS ISO 6101-4 - RUBBER - DETERMINATION OF METAL CONTENT BY ATOMIC ABSORPTION SPECTROMETRY - PART 4: DETERMINATION OF MANGANESE CONTENT
BS ISO 18068:2014	Cotton fibres. Test method for sugar content. Spectrophotometry
I.S. EN 14035-24:2004	FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
I.S. EN 60422:2013	MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
UNI EN ISO 4619 : 2011	DRIERS FOR PAINTS AND VARNISHES
17/30366149 DC : 0	BS ISO 28198 - VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER
04/30124059 DC : DRAFT OCT 2004	ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
PREN 12592 : DRAFT 2013	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
BS 2782-1.130C(1993) : 1993 AMD 13566	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE CONDUCTOMETRIC METHOD
13/30264749 DC : 0	BS ISO 18068 - COTTON FIBERS - TEST METHOD FOR SUGAR CONTENT - SPECTROPHOTOMETRY
03/105714 DC : DRAFT MAR 2003	ISO 24234 - DENTISTRY - MERCURY AND ALLOYS FOR DENTAL AMALGAM
00/120794 DC : DRAFT FEB 2000	BS 3483-X - METHODS FOR TESTING PIGMENTS FOR PAINTS - DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
ISO 10238:1999	Carbonaceous materials used in the production of aluminium — Pitch for electrodes — Determination of sulfur content by an instrumental method
BS ISO 6101-3:2014	Rubber. Determination of metal content by atomic absorption spectrometry Determination of copper content
I.S. EN 1948-4:2010	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
DIN ISO 11235 E : 2006	RUBBER COMPOUNDING INGREDIENTS - SULFENAMIDE ACCELERATORS - TEST METHODS
BS ISO 6235:2016	Rubber, raw. Determination of block polystyrene content. Ozonolysis method
05/30138264 DC : DRAFT AUG 2005	EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
BS 2000-53(1999) : 1999	CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
BS EN 61125:1993	Unused hydrocarbon-based insulating liquids. Test methods for evaluating the oxidation stability
UNI EN 4503 : 2014	AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
PD CEN/TS 17060:2017	Fertilizers. Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline
10/30199670 DC : 0	BS ISO 11262 - SOIL QUALITY - DETERMINATION OF TOTAL CYANIDE
PREN 12174 : DRAFT 2012	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
BS ISO 7780:1998	Rubber and rubber latices. Determination of manganese content. Sodium periodate photometric methods
BS EN ISO 4938:2016	Steel and iron. Determination of nickel content. Gravimetric or titrimetric method
BS ISO 14849:1999	Plastics. Phenol-formaldehyde mouldings. Determination of free ammonia and ammonium compounds. Indophenol method
BS 7164-28.1(1990) : 1990	CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF COPPER CONTENT - ATOMIC ABSORPTION SPECTROPHOTOMETRY
PREN 12386 : DRAFT 2012	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
DIN EN 13697:2015-06	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
DIN EN ISO 150:2007-05	RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
NFT 75 611 : 2007	COSMETICS - MICROBIOLOGY - EVALUATION OF THE ANTIMICROBIAL PROTECTION OF A COSMETIC PRODUCT
I.S. EN IEC 61125:2018	INSULATING LIQUIDS - TEST METHODS FOR OXIDATION STABILITY - TEST METHOD FOR EVALUATING THE OXIDATION STABILITY OF INSULATING LIQUIDS IN THE DELIVERED STATE
PREN 1657 : DRAFT 2014	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
BS EN ISO 150:2007	Raw, refined and boiled linseed oil for paints and varnishes. Specifications and methods of test
UNI EN 16438 : 2014	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NONPOROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
BS EN 15947-4 : 2016	PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
VDE 0370-12 : 1994	SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
UNE-EN ISO 787-7:2010	General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009)
EN 12353:2013	Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
NF EN ISO 4619 : 2011	DRIERS FOR PAINTS AND VARNISHES
BS EN 13697:2001	Chemical disinfectants and antiseptics. Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas. Test method and requirements without mechanical action (phase 2/step 2)
DIN EN ISO 14184-1:2011-12	Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
DIN EN 12353:2013-04	Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
UNE-EN 12485:2010	Chemicals used for treatment of water intended for human consumption - Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide and calcium magnesium carbonate - Test methods
BS EN ISO 6865 : 2001	METHODS FOR ANALYSIS OF ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION
BS EN 12485:2017	Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime. Test methods
ISO 3735:1999	Crude petroleum and fuel oils Determination of sediment Extraction method
ISO 6865:2000	Animal feeding stuffs — Determination of crude fibre content — Method with intermediate filtration
UNE-EN 12353:2013	Chemical disinfectants and antiseptics - Preservation of test organisms used for the determination of bactericidal (including Legionella), mycobactericidal, sporicidal, fungicidal and virucidal (including bacteriophages) activity
BS EN ISO 182-4:2001	Plastics. Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Potentiometric method
ISO 1172:1996	Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
UNE-EN 1657:2016	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
BS EN 12386:2012	Chemicals used for treatment of water intended for human consumption. Copper sulfate
DIN EN 14035-24:2004-11	FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
DIN EN 1948-2:2006-06	Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs
DIN EN 1275:2006-03	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1); German version EN 1275:2005
DIN EN 12485:2017-10	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
I.S. EN 12485:2017	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
I.S. EN 12386:2012	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
I.S. EN 1657:2016	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
I.S. EN 1948-2:2006	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
I.S. EN 12353:2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - PRESERVATION OF TEST ORGANISMS USED FOR THE DETERMINATION OF BACTERICIDAL (INCLUDING LEGIONELLA), MYCOBACTERICIDAL, SPORICIDAL, FUNGICIDAL AND VIRUCIDAL (INCLUDING BACTERIOPHAGES) ACTIVITY
I.S. EN 12592:2014	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
I.S. EN 12174:2013	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
I.S. EN ISO 14184-1:2011	TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD)
I.S. EN 13624:2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
DIN EN 1911-2:1998-07	STATIONARY SOURCE EMISSIONS - MANUAL METHOD OF DETERMINATION OF HCL - PART 2: GASEOUS COMPOUNDS ABSORPTION
BS 7164-26.1:1997	Chemical tests for raw and vulcanized rubber. Methods for determination of manganese content Atomic absorption spectrometry
VDI 3498 Blatt 1:2002-07	Ambient air measurement - Indoor air measurement - Measurement of polychlorinated dibenzo-p-dioxins and dibenzofurans; Method using large filters
BS 7164-28.1:1997	Chemical tests for raw and vulcanized rubber. Methods for determination of copper content Atomic absorption spectrometry
BS 2782-7:Method 732D:1999	Methods of testing plastics. Rheological properties Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers - Method 732D: Determination of the viscosity of polycarbonate (PC) moulding and extrusion materials in dilute solution using capillary viscometers
ONORM EN 12174 : 2013	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
BS 6043-1.13:2000	Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrode pitch - Determination of sulfur content
UNE-EN ISO 4938:2016	Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016)
BS ISO 4619 : 1998	DRIERS FOR PAINTS AND VARNISHES
BS EN ISO 4619:2010	Driers for paints and varnishes
BS 3900-B17:1991	Methods of test for paints Preparation of acid extracts from dried paint films
I.S. EN ISO 4938:2016	STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:2016)
BIS IS 1448-123 : 2013	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 123: PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
09/30198710 DC : 0	BS EN 1948-4 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
12/30258191 DC : 0	BS EN 12386 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
BS 3483-B3:1982	Methods for testing pigments for paints Determination of residue on sieve (water method, using a manual procedure)
DIN EN 16339:2013-11	Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
18/30369599 DC : 0	BS EN ISO 150 - RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
ISO 6978:1992	Natural gas Determination of mercury
DIN 19266:2015-05	PH MEASUREMENT - REFERENCE BUFFER SOLUTIONS FOR THE CALIBRATION OF PH MEASURING EQUIPMENT
13/30255303 DC : 0	BS EN 12592 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
DIN EN 1948-4:2014-03	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
BS 7678:1993	Method for determination of mercury in natural gas
BS EN IEC 61125:2018	Insulating liquids. Test methods for oxidation stability. Test method for evaluating the oxidation stability of insulating liquids in the delivered state
04/30115588 DC : DRAFT JUN 2004	ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
BS EN 4503:2013	Aerospace series. Non-metallic materials. Textiles. Test method. Determination of water soluble chloride and sulfate of aqueous extracts
BS 6806:2002	Textiles. Determination of formaldehyde. Method for the determination of total and free (water extraction method) formaldehyde using chromotropic acid
BS ISO 6101-4:2014	Rubber. Determination of metal content by atomic absorption spectrometry Determination of manganese content
BIS IS 1448-30 : 2013	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 30: CRUDE PETROLEUM AND FUEL OILS - DETERMINATION OF SEDIMENT - EXTRACTION METHOD
UNI EN ISO 787-7 : 2009	GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
10/30215366 DC : 0	BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
BS 7164-26.2(1990) : 1990	CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF MANGANESE CONTENT - SODIUM PERIODATE PHOTOMETRIC METHODS
PREN 3839 : DRAFT 1996	AEROSPACE SERIES ELECTROLESS NICKEL PLATING OF CORROSION RESISTANCE STEEL
DIN EN ISO 10769:2011-09	Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
BIS IS/ISO 6741-3 : 1987	TEXTILES - FIBRES AND YARNS - DETERMINATION OF COMMERCIAL MASS OF CONSIGNMENTS
ISO 7624:1997	Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability
DIN EN 15947-4:2016-02	Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
I.S. EN 1650:2008	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
IP 459-2 : 2000	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE PARAFFIN WAX CONTENT - PART 2: METHOD BY EXTRACTION
DIN EN 60465 : 1994	SPECIFICATION FOR UNUSED INSULATING MINERAL OILS FOR CABLES WITH OIL DUCTS
ISO 4619:1998	Driers for paints and varnishes
UNE-EN 16339:2014	Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
ISO 11235:2016	Rubber compounding ingredients — Sulfenamide accelerators — Test methods
ISO 7780:1998	Rubbers and rubber latices Determination of manganese content Sodium periodate photometric methods
ISO 11425:1996	Rubber hoses and hose assemblies for automobile power-steering systems Specification
ISO 14849:1999	Plastics Phenol-formaldehyde mouldings Determination of free ammonia and ammonium compounds Indophenol method
ISO 5796:2000	Rubber compounding ingredients Natural calcium carbonate Test methods
IEC 61125:2018	Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
DIN EN 12386:2013-01	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
DIN EN 12592:2015-01	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
DIN EN 12174:2013-08	Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
DIN EN 14456 E : 2004	PRODUCTS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - BONE CHARCOAL
DIN EN 14562:2006-08	Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
ISO 14184-1:2011	Textiles — Determination of formaldehyde — Part 1: Free and hydrolysed formaldehyde (water extraction method)
BS EN ISO 182-3 : 2001	PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 3: CONDUCTOMETRIC METHOD
BS EN 1948-3:2006	Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Identification and quantification of PCDDs/PCDFs
BS EN 1657:2016	Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1)
BS EN 14562:2006	Chemical disinfectants and antiseptics. Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area. Test method and requirements (phase 2, step 2)
ISO 14182:1999	Animal feeding stuffs — Determination of residues of organophosphorus pesticides — Gas chromatographic method
BS EN 1650 : 2008	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
I.S. EN 1275:2006	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF BASIC FUNGICIDAL OR BASIC YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS - TEST METHOD AND REQUIREMENTS (PHASE 1)
EN ISO 4619:2010	Driers for paints and varnishes (ISO 4619:1998)
EN 1650:2008+A1:2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
EN 1948-2:2006	Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs
EN 1657:2016	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
UNI EN 12386 : 2013	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - COPPER SULFATE
UNI EN ISO 14184-1 : 2011	TEXTILES - DETERMINATION OF FORMALDEHYDE - PART 1: FREE AND HYDROLYSED FORMALDEHYDE (WATER EXTRACTION METHOD)
UNI EN 12174 : 2013	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
UNI EN ISO 10769 : 2011	CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
UNI EN 1948-2 : 2006	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
UNI EN 12592 : 2015	BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF SOLUBILITY
DEFSTAN 13-67/3(2013) : 2013	POTASSIUM DICHROMATE
EN IEC 61125:2018	Insulating liquids - Test methods for oxidation stability - Test method for evaluating the oxidation stability of insulating liquids in the delivered state
BS EN 16339:2013	Ambient air. Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
15/30324378 DC : 0	BS EN 12485 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE AND CALCIUM MAGNESIUM CARBONATE - TEST METHODS
ISO 8332:2011	Rubber compounding ingredients Sulfur Methods of test
12/30262905 DC : 0	BS EN 13697 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
13/30276415 DC : 0	BS EN ISO 4938 - STEEL AND IRONS - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD
DIN EN 16438:2014-07	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
08/30189644 DC : DRAFT SEP 2008	BS ISO 28198 - ANIMAL AND VEGETABLE FATS AND OILS - DETERMINATION OF TOLUENE INSOLUBLE MATTER
BS ISO 16000-14:2009	Indoor air Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs). Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
BS 2000-280(1999) : 1999	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
BS 2461:1983	Specification for gas washing bottles
UNE-EN 15947-4:2016	Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
99/711597 DC : DRAFT JULY 1999	PREN 4503 - AEROSPACE SERIES - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
02/207269 DC : 0	IEC 60422 ED.3 - SUPERVISION AND MAINTENANCE GUIDE FOR MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT
BS ISO 699:2015	Pulps. Determination of alkali resistance
UNE-EN 1948-4:2011	Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
BS 4784-3:1988	Methods for determination of commercial mass of consignments of textiles Specimen cleaning procedures
10/30212476 DC : 0	BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
03/320961 DC : DRAFT NOV 2003	EN 1948-2 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 2: EXTRACTION AND CLEAN-UP OF PCDDS/PCDFS
14/30282212 DC : 0	BS EN 1657 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
DEFSTAN 68-118/1(1993) : INTERIM	DEICING & ANTI ICING FLUID FOR RUNWAYS
BS ISO 5796:2000	Rubber compounding ingredients. Natural calcium carbonate. Test methods
ISO 10237:1997	Carbonaceous materials for use in the production of aluminium Calcined coke Determination of residual-hydrogen content
DIN 18132:2012-04	SOIL, TESTING PROCEDURES AND TESTING EQUIPMENT - DETERMINATION OF WATER ABSORPTION
DIN EN 16438 E : 2014	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SURFACE TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY AREA ON NON-POROUS SURFACES WITHOUT MECHANICAL ACTION - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
I.S. EN 4503:2013	AEROSPACE SERIES - NON-METALLIC MATERIALS - TEXTILES - TEST METHOD - DETERMINATION OF WATER SOLUBLE CHLORIDE AND SULFATE OF AQUEOUS EXTRACTS
UNI ISO 1657 : 2014	RUBBER, RAW AND RUBBER LATEX - DETERMINATION OF IRON CONTENT - 1,10-PHENANTHROLINE PHOTOMETRIC METHOD
I.S. EN 13697:2015	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)
ISO 18068:2014	Cotton fibres Test method for sugar content Spectrophotometry
ISO 6101-4:2014	Rubber Determination of metal content by atomic absorption spectrometry Part 4: Determination of manganese content
ISO 25947-4:2017	Fireworks — Categories 1, 2 and 3 — Part 4: Test methods
BS ISO 28198:2009	Vegetable fats and oils. Determination of toluene insoluble matter
DIN EN ISO 150 E : 2007	RAW, REFINED AND BOILED LINSEED OIL FOR PAINTS AND VARNISHES - SPECIFICATIONS AND METHODS OF TEST
BS 2000-306(2011) : 2011	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PART 306: DETERMINATION OF OXIDATION STABILITY OF STRAIGHT MINERAL OIL
I.S. EN 15947-4:2015	PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
ISO 6741-3:1987	Textiles — Fibres and yarns — Determination of commercial mass of consignments — Part 3: Specimen cleaning procedures
ISO 28198:2009	Vegetable fats and oils Determination of toluene insoluble matter
ISO 11262:2011	Soil quality — Determination of total cyanide
EN 13697:2015	Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
I.S. EN 61125:1993	UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY
ISO 6101-3:2014	Rubber Determination of metal content by atomic absorption spectrometry Part 3: Determination of copper content
EN ISO 6414:1994	Technical drawings for glassware (ISO 6414:1982)
I.S. EN ISO 6414:1995	TECHNICAL DRAWINGS FOR GLASSWARE
DIN EN 12485:2015-08 (Draft)	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
DIN EN 14562 E : 2006	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE CARRIER TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY FOR INSTRUMENTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
ISO 787-7:2009	General methods of test for pigments and extenders — Part 7: Determination of residue on sieve — Water method — Manual procedure
BS EN ISO 3262-3:1998	Extenders for paints. Specifications and methods of test Blanc fixe
BS EN ISO 14182:2000	Animal feeding stuff. Determination of residues of organophosphorus pesticides. Gas chromatographic method
BS EN ISO 14184-1:2011	Textiles. Determination of formaldehyde Free and hydrolised formaldehyde (water extraction method)
BS EN 13624:2013	Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area. Test method and requirements (phase 2, step 1)
ISO 10769:2011	Clay geosynthetic barriers Determination of water absorption of bentonite
ISO 182-4:1993	Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 4: Potentiometric method
BS EN 12606-2:2000	Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of the paraffin wax content Method by extraction
ISO 11667:1997	Fibre-reinforced plastics — Moulding compounds and prepregs — Determination of resin, reinforced-fibre and mineral-filler content — Dissolution methods
BS EN 1911-2:1998	Stationary source emissions. Manual method of determination of HCI Gaseous compounds absorption
ISO 182-3:1993	Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method
BS EN 12174:2013	Chemicals used for treatment of water intended for human consumption. Sodium hexafluorosilicate
BS EN 12592:2014	Bitumen and bituminous binders. Determination of solubility
BS EN 1948-2:2006	Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Extraction and clean-up of PCDDs/PCDFs
ISO 3262-3:1998	Extenders for paints — Specifications and methods of test — Part 3: Blanc fixe
BS EN 14035-24:2004	Fireworks Novelty matches. Specification and test methods
ISO 4938:2016	Steel and iron Determination of nickel content Gravimetric or titrimetric method
UNE-EN 12174:2013	Chemicals used for treatment of water intended for human consumption - Sodium hexafluorosilicate
BS EN ISO 3735:1999	Crude petroleum and fuel oils. Determination of sediment. Extraction method
BS EN 1275:2005	Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics. Test method and requirements (phase 1)
UNE-EN 12592:2015	Bitumen and bituminous binders - Determination of solubility
UNE-EN 13624:2014	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
UNE-EN 1650:2008	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
BS EN 14456:2004	Products used for treatment of water intended for human consumption. Bone charcoal
UNE-EN 13697:2015	Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
UNE-EN ISO 4619:2011	Driers for paints and varnishes (ISO 4619:1998)
UNE-EN 60422:2013	Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
IEC 60422:2013	Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
BS EN ISO 11667:2000	Fibre reinforced plastics. Moulding compounds and prepregs. Determination of resin, reinforcement-fibre and mineral-filler content. Dissolution methods
EN ISO 3262-2:1998	Extenders for paints - Specifications and methods of test - Part 2: Baryte (natural barium sulfate) (ISO 3262-2:1998)
EN ISO 3735:1999	Crude petroleum and fuel oils - Determination of sediment - Extraction method (ISO 3735:1999)
EN 14562 : 2006	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE CARRIER TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY FOR INSTRUMENTS USED IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 2)
EN ISO 787-7 : 2009	ISO 787-7:2009 specifies a general method of test for determining the residue on sieve from a sample of pigment or extender dispersed in water.
EN 14035-35 : 2004	FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
EN 14456:2004	Products used for treatment of water intended for human consumption - Bone charcoal
EN ISO 12224-1:1998	Solder wire, solid and flux cored - Specification and test methods - Part 1: Classification and performance requirements (ISO 12224-1:1997)
EN 14035-24 : 2004	FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
EN 16438:2014	Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
EN ISO 182-3:2000	Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 3: Conductometric method (ISO 182-3:1993)
EN ISO 14182 : 1999	ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD
EN 15947-4:2015	Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
EN ISO 1172:1998	Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
EN ISO 4938:2016	Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016)
EN ISO 182-2 : 1999	PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 2 - PH METHOD
EN ISO 11667 : 1999	FIBRE-REINFORCED PLASTICS - MOULDING COMPOUNDS AND PREPREGS - DETERMINATION OF RESIN, REINFORCED-FIBRE AND MINERAL-FILLER CONTENT - DISSOLUTION METHODS
EN ISO 6865 : 2000	ANIMAL FEEDING STUFFS - DETERMINATION OF CRUDE FIBRE CONTENT - METHOD WITH INTERMEDIATE FILTRATION
EN 24938:1990/AC:1991	STEEL AND IRON - DETERMINATION OF NICKEL CONTENT - GRAVIMETRIC OR TITRIMETRIC METHOD (ISO 4938:1988)
EN ISO 3262-3:1998	Extenders for paints - Specifications and methods of test - Part 3: Blanc fixe (ISO 3262-3:1998)
EN 16339:2013	Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling
EN 4503:2013	Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water soluble chloride and sulfate of aqueous extracts
EN ISO 10769:2011	Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011)
EN ISO 14184-1:2011	Textiles - Determination of formaldehyde - Part 1: Free and hydrolysed formaldehyde (water extraction method) (ISO 14184-1:2011)
EN ISO 182-4 : 2000	PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 4: POTENTIOMETRIC METHOD
BS ISO 11425:1996	Rubber hoses and hose assemblies for automobile power-steering systems. Specification
BS EN 16438:2014	Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
14/30303444 DC : 0	BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
DEFSTAN 68-74/2(2013) : 2013	BARIUM NITRATE, GRADES 1 AND 1A
ISO 1657:1986	Rubber, raw and rubber latex Determination of iron content 1,10-Phenanthroline photometric method
DD CEN/TS 1948-4:2007	Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Sampling and analysis of dioxin-like PCBs
12/30268242 DC : 0	BS EN 12174 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SODIUM HEXAFLUOROSILICATE
BS ISO 11235:2016	Rubber compounding ingredients. Sulfenamide accelerators. Test methods
BS EN 1948-4 : 2010	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
UNE-ISO 1628-6:2013	Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
BS ISO 1172 : 96 AMD 10350	TEXTILE-GLASS-REINFORCED PLASTICS - PREPREGS, MOULDING COMPOUNDS AND LAMINATES - DETERMINATION OF THE TEXTILE-GLASS AND MINERAL-FILLER CONTENT - CALCINATION METHODS
09/30202313 DC : 0	BS EN 12514-3 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 3: SAFETY REQUIREMENTS AND TESTS - VALVES AND METERS
BS EN ISO 787-7:2009	General methods of test for pigments and extenders Determination of residue on sieve. Water method. Manual procedure
09/30175168 DC : 0	BS EN ISO 10769 - CLAY GEOSYNTHETIC BARRIERS (GBR-C) - DETERMINATION OF WATER ABSORPTION OF BENTONITE
DIN ISO 11262:2012-04	Soil quality - Determination of total cyanide (ISO 11262:2011)
05/30092751 DC : DRAFT APR 2005	EN 1657 - CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN THE VETERINARY FIELD - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
NF EN ISO 10769 : 2011	CLAY GEOSYNTHETIC BARRIERS - DETERMINATION OF WATER ABSORPTION OF BENTONITE
UNI EN 16339 : 2013	AMBIENT AIR - METHOD FOR THE DETERMINATION OF THE CONCENTRATION OF NITROGEN DIOXIDE BY DIFFUSIVE SAMPLING
BS 2000-280(1996) : 1996	METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND LUBRICANTS - INHIBITED MINERAL TURBINE OILS - DETERMINATION OF OXIDATION STABILITY
17/30355140 DC : 0	BS ISO 8332 - RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
BS 7164-26.1(1990) : 1990	CHEMICAL TESTS FOR RAW AND VULCANIZED RUBBER - METHODS FOR DETERMINATION OF MANGANESE CONTENT - ATOMIC ABSORPTION SPECTROMETRY
CGSB 4.2-72.3 : M1991(R2013)	TEXTILE TEST METHODS - TEXTILES - FIBRES AND YARNS - DETERMINATION OF COMMERCIAL MASS OF CONSIGNMENTS - PART 3: SPECIMEN CLEANING PROCEDURES
02/564187 DC : DRAFT OCT 2002	BS EN 14562 - CHEMICAL DISINFECTANTS - QUANTITATIVE CARRIER TEST FOR EVALUATION OF FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS FOR INSTRUMENTS USED IN MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2/STEP 2)
BS 5766-20(2000) : 2000	ANIMAL FEEDING STUFFS - DETERMINATION OF RESIDUES OF ORGANOPHOSPHORUS PESTICIDES - GAS CHROMATOGRAPHIC METHOD
S.R. CEN TS 1948-4:2007	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
BS 2782-7 Method 732D:1991	Methods of testing plastics. Rheological properties Determination of viscosity number of polycarbonate moulding and extrusion materials
BS ISO 11338-1:2003	Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons Sampling
DIN ISO 16000-14:2012-03	Indoor air - Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) - Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry (ISO 16000-14:2009)
UNI EN 1650 : 2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS AND ANTISEPTICS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
BS ISO 8332:2011	Rubber compounding ingredients. Sulfur. Methods of test
UNI EN 1948-4 : 2014	STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 4: SAMPLING AND ANALYSIS OF DIOXIN-LIKE PCBS
NF ISO 8332 : 2012	RUBBER COMPOUNDING INGREDIENTS - SULFUR - METHODS OF TEST
S.R. CEN/TS 17060:2017	FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS > 10% USING A GRAVIMETRIC METHOD WITH 8-HYDROXYQUINOLINE
DIN EN ISO 4619:2011-02	DRIERS FOR PAINTS AND VARNISHES
ISO 6235:2016	Rubber, raw Determination of block polystyrene content Ozonolysis method
PREN 12485 : DRAFT 2015	CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - CALCIUM CARBONATE, HIGH-CALCIUM LIME, HALF-BURNT DOLOMITE, MAGNESIUM OXIDE, CALCIUM MAGNESIUM CARBONATE AND DOLOMITIC LIME - TEST METHODS
NF EN ISO 787-7 : 2009	GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS - PART 7: DETERMINATION OF RESIDUE ON SIEVE - WATER METHOD - MANUAL PROCEDURE
ISO 11338-1:2003	Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling
ISO 150:2006	Raw, refined and boiled linseed oil for paints and varnishes Specifications and methods of test
ISO 6745:1990	Zinc phosphate pigments for paints — Specifications and methods of test
DIN EN ISO 1172:1998-12	Textile glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
DIN EN 13624:2013-12	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase2, step 1)
ISO 182-2:1990	Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method
UNE-EN 12386:2013	Chemicals used for treatment of water intended for human consumption - Copper sulfate
EN 1162:1996	Feather and down - Test methods - Determination of the oxygen index number
DIN EN 14456:2004-09	Products used for treatment of water intended for human consumption - Bone charcoal
CEN/TS 17060 : 2017	FERTILIZERS - DETERMINATION OF MOLYBDENUM IN CONCENTRATIONS > 10% USING A GRAVIMETRIC METHOD WITH 8-HYDROXYQUINOLINE
EN 12606-2:1999	Bitumen and bituminous binders - Determination of the paraffin wax content - Part 2: Method of extraction
CEN/TS 1948-4:2007	Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs
EN 1164:1998	Feather and down - Test methods - Determination of the turbidity of an aqueous extract
EN 1275:2005	Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)
UNI EN 13624 : 2013	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE SUSPENSION TEST FOR THE EVALUATION OF FUNGICIDAL OR YEASTICIDAL ACTIVITY IN THE MEDICAL AREA - TEST METHOD AND REQUIREMENTS (PHASE 2, STEP 1)
EN 60422:2013	Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
BS 2782-1.130B(1991) : 1991 AMD 10685	METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE THERMAL STABILITY OF POLYVINYL CHLORIDE BY THE pH METHOD
BS 4382(1980) : 1980 AMD 8898	METHOD FOR DETERMINATION OF SEDIMENT IN CRUDE PETROLEUM AND FUEL OILS (EXTRACTION METHOD)
NF EN ISO 182-3 : 2000	PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 3: CONDUCTOMETRIC METHOD
ONORM EN 13697 : 2015	CHEMICAL DISINFECTANTS AND ANTISEPTICS - QUANTITATIVE NON-POROUS SURFACE TEST FOR THE EVALUATION OF BACTERICIDAL AND/OR FUNGICIDAL ACTIVITY OF CHEMICAL DISINFECTANTS USED IN FOOD, INDUSTRIAL, DOMESTIC AND INSTITUTIONAL AREAS - TEST METHOD AND REQUIREMENTS WITHOUT MECHANICAL ACTION (PHASE 2, STEP 2)