|
10/30218038 DC : DRAFT MAY 2010
|
BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
|
16/30333424 DC : 0
|
BS ISO 12764 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL |
|
ISO 1088:2007
|
Hydrometry Velocity-area methods using current-meters Collection and processing of data for determination of uncertainties in flow measurement |
|
17/30326671 DC : 0
|
BS ISO 27919-1 - CARBON DIOXIDE CAPTURE - PART 1: PERFORMANCE EVALUATION METHODS FOR POST-COMBUSTION CO[2] CAPTURE INTEGRATED WITH A POWER PLANT |
|
BS ISO 19970:2017
|
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels. Metering of gas as fuel on LNG carriers during cargo transfer operations |
|
ISO 2715:2017
|
Liquid hydrocarbons — Volumetric measurement by turbine flowmeter |
|
EN ISO 5801:2017
|
Fans - Performance testing using standardized airways (ISO 5801:2017) |
|
BS ISO 10790:2015
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - GUIDANCE TO THE SELECTION, INSTALLATION AND USE OF CORIOLIS FLOWMETERS (MASS FLOW, DENSITY AND VOLUME FLOW MEASUREMENTS) |
|
ISO 8178-1:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
|
09/30190929 DC : 0
|
BS ISO 29042-5 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 5: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH UNDUCTED OUTLET |
|
BS ISO 17089-1:2010
|
Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
|
15/30321263 DC : 0
|
BS EN 62828-5 ED. 1.0 - PROCEDURES FOR TESTING INDUSTRIAL AND PROCESS MEASUREMENT TRANSMITTERS - PART 5: SPECIFIC PROCEDURES FOR FLOW TRANSMITTERS |
|
16/30313383 DC : 0
|
BS ISO 19970 - REFRIGERATED HYDROCARBON AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - METERING OF GAS AS FUEL ON LNG CARRIERS DURING CARGO TRANSFER OPERATIONS |
|
BS 7526(1991) : 1991 AMD 7980
|
METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOWMETERS |
|
DIN EN 12405-3:2016-04
|
Gas meters - Conversion devices - Part 3: Flow computer |
|
CGSB-157.6 : M91
|
LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - VELOCITY-AREA METHODS - COLLECTION AND PROCESSING OF DATA FOR DETERMINATION OF ERRORS IN MEASUREMENT |
|
UNI 11363 : 2010
|
COMBUSTIBLE GASES - MEASUREMENTS OF FLOW RATE AND QUANTITY - METROLOGICAL TRACEABILITY |
|
ISO 29042-1:2008
|
Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 1: Selection of test methods |
|
ISO 29042-9:2011
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 9: Decontamination index |
|
API MPM CH13.3 : 2017
|
MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 13.3: MEASUREMENT UNCERTAINTY |
|
BS EN 12405-1 : 2005
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
|
S.R. CEN/TR 16787:2014
|
INDUSTRIAL GAS INSTALLATION - GUIDELINE |
|
I.S. EN ISO 15112:2014
|
NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
|
BS 3680-3B:1983
|
MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STREAM FLOW MEASUREMENT - GUIDE FOR ESTABLISHMENT AND OPERATION OF A GAUGING STATION |
|
17/30356734 DC : 0
|
BS EN 14236 - ULTRASONIC DOMESTIC GAS METERS |
|
EN ISO 6416:2017
|
Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017) |
|
EN 12261:2018
|
Gas meters - Turbine gas meters |
|
NF EN 62006 : 2011
|
HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
|
ISO 16956:2015
|
Thermal performance in the built environment Determination of air flow rate in building applications by field measuring methods |
|
UNE-EN ISO 5801:2010
|
Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) |
|
IEC 60193:1999
|
Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
|
ISO 4359:2013
|
Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes |
|
DIN EN 24006:1993-08
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS; VOCABULARY AND SYMBOLS |
|
ISO/TS 25377:2007
|
Hydrometric uncertainty guidance (HUG) |
|
BS EN ISO 748:2007
|
Hydrometry. Measurement of liquid flow in open channels using current-meters or floats |
|
BS EN ISO 14111:1999
|
NATURAL GAS - GUIDELINES TO TRACEABILITY IN ANALYSIS |
|
EN 1093-6:1998+A1:2008
|
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducted outlet |
|
EN 12405 : 2002
|
GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
|
CEN ISO/TS 25377:2007
|
Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007) |
|
DIN EN ISO 748:2008-02
|
Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007) |
|
BS 3680-4G:1990
|
MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - WEIRS AND FLUMES - FLAT-V WEIRS |
|
I.S. EN 60193:2000
|
HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES - MODEL ACCEPTANCE TESTS (IEC 60193:1999) |
|
DD CEN ISO/TS 25377:2007
|
Hydrometric uncertainty guide |
|
PD ISO/TR 26762:2008
|
Natural gas. Upstream area. Allocation of gas and condensate |
|
ISO/TR 12748:2015
|
Natural Gas Wet gas flow measurement in natural gas operations |
|
BS 2000-476(2002) : 2002
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING |
|
PREN 12405-1 : DRAFT 2017
|
GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
|
16/30319087 DC : 0
|
BS ISO 9123 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STAGE-FALL-DISCHARGE RELATIONSHIPS |
|
I.S. EN 12405:2002
|
GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
|
95/213867 DC : DRAFT OCT 1995
|
BS ISO 13550 - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS BY WEIRS AND FLUMES - VERTICAL UNDERFLOW GATES AND RADIAL GATES |
|
16/30334068 DC : 0
|
BS ISO 8178-4 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 4: STEADY-STATE TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
|
CEN/TR 16787:2014
|
Industrial Gas Installation - Guideline |
|
96/702049 DC : 0
|
PREN ISO 917 - TESTING OF REFRIGERANT COMPRESSORS |
|
BS 3680-3H:1993
|
MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STREAM FLOW MEASUREMENT - ELECTROMAGNETIC METHOD USING A FULL-CHANNEL-WIDTH COIL |
|
BS EN ISO 5801:2017
|
Fans. Performance testing using standardized airways |
|
16/30346580 DC : 0
|
BS EN 13771-2 - COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
|
ISO/TR 7066-1:1997
|
Assessment of uncertainty in calibration and use of flow measurement devices — Part 1: Linear calibration relationships |
|
DIN EN ISO 5167-5 E : 2016
|
MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
|
BS ISO 2425:2010
|
Hydrometry. Measurement of liquid flow in open channels under tidal conditions |
|
BS ISO 9123:2017
|
Hydrometry. Stage-fall-discharge relationships |
|
PD IEC/TS 62282-7-2:2014 (published 2014-05)
|
Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
|
BS ISO 2715:2017
|
Liquid hydrocarbons. Volumetric measurement by turbine flowmeter Volumetric measurement by turbine meter systems |
|
BS ISO 16956:2015
|
THERMAL PERFORMANCE IN THE BUILT ENVIRONMENT - DETERMINATION OF AIR FLOW RATE IN BUILDING APPLICATIONS BY FIELD MEASURING METHODS |
|
BS ISO 15112 : 2011
|
NATURAL GAS - ENERGY DETERMINATION |
|
PD ISO/TR 12748:2015
|
Natural Gas. Wet gas flow measurement in natural gas operations |
|
PREN 13053 : DRAFT 2017
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
|
BS ISO 8178-2:2008 (published 2009-05)
|
Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
|
DIN EN ISO 15112:2014-09
|
Natural gas - Energy determination (ISO 15112: 2011) |
|
UNE-EN 12405-3:2016
|
Gas meters - Conversion devices - Part 3: Flow computer |
|
ISO 6421:2012
|
Hydrometry — Methods for assessment of reservoir sedimentation |
|
I.S. EN ISO 5801:2017
|
FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS (ISO 5801: 2017) |
|
API MPM CH14.3.1 : 2012 : INC : ERR 1 : 2013
|
ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
|
ISO 13348:2007
|
Industrial fans Tolerances, methods of conversion and technical data presentation |
|
BS ISO 14511:2001
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - THERMAL MASS FLOWMETERS |
|
DIN EN ISO 15112 E : 2014
|
NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
|
ISO 29042-6:2010
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet |
|
ISO 12242:2012
|
Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
|
ISO 6416:2017
|
Hydrometry — Measurement of discharge by the ultrasonic transit time (time of flight) method |
|
BS EN ISO 6416:2005
|
HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO 6416:2017) |
|
AMCA 210 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
|
RM.AERO 80711 : 1982
|
MEASUREMENTS OF STEADY STATE FLUID FLOW - GENERAL INSTRUCTIONS |
|
EN 14236:2007
|
Ultrasonic domestic gas meters |
|
IEC 62006:2010
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
|
S.R. CEN/TR 12101-4:2009
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
|
I.S. EN 13053:2006
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
|
DIN EN 1359:2007-06
|
GAS METERS - DIAPHRAGM GAS METERS |
|
DIN EN ISO 9300 E : 2005
|
MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW - VENTURI NOZZLES |
|
DIN EN 13771-1:2015-01 (Draft)
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
|
DIN EN 13771-2:2016-11 (Draft)
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
|
DIN EN 14236:2008-06
|
ULTRASONIC DOMESTIC GAS METERS |
|
BS EN 29104:1993
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
|
BS EN 1093-6 : 1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
|
I.S. EN 1093-6:1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
|
I.S. EN ISO 9300:2005
|
MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURI NOZZLES |
|
DIN EN 1776:2016-05
|
GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
|
DIN EN 13053:2012-02
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011) |
|
I.S. EN 1359:2017
|
GAS METERS - DIAPHRAGM GAS METERS |
|
DIN EN 12405:2003-10
|
GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
|
I.S. EN 13771-2:2017
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
|
I.S. EN ISO 748:2007
|
HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS USING CURRENT-METERS OR FLOATS |
|
I.S. EN 13771-1:2016
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
|
I.S. EN 1093-7:1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
|
I.S. EN 1776:2015
|
GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
|
BS 848-1:1997
|
FANS FOR GENERAL PURPOSES - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
|
ASME MFC 3M : 2004
|
MEASUREMENT OF FLUID FLOW IN PIPES USING ORIFICE, NOZZLE, AND VENTURI |
|
VDI/VDE 2040 Blatt 5:1989-03
|
Calculation principles for the measurement of fluid flow using orifice plates, nozzles and venturi tubes; uncertainties |
|
BS 848-1(2007) : 2007 COR 2010
|
INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
|
BS 848-9:2007
|
FANS FOR GENERAL PURPOSES - PART 9: TOLERANCES, METHODS OF CONVERSION AND TECHNICAL DATA PRESENTATION |
|
VDI/VDE 2040 Blatt 2:1987-04
|
Calculation principles for measurement of fluid flow using orifice plates, nozzles and venturi tubes; equations and formulae |
|
ISO 1100-2:2010
|
Hydrometry Measurement of liquid flow in open channels Part 2: Determination of the stage-discharge relationship |
|
BS 848-9:2006
|
FANS FOR GENERAL PURPOSES - PART 9: TOLERANCES, METHODS OF CONVERSION AND TECHNICAL DATA PRESENTATION |
|
BS 1042-1.3(1991) : 1991 AMD 8878
|
MEASUREMENT OF FLUID FLOW IN CLOSED CIRCUITS - PRESSURE DIFFERENTIAL DEVICES - METHOD OF MEASUREMENT OF GAS FLOW BY MEANS OF CRITICAL FLOW VENTURI NOZZLES |
|
API MPM CH14.3.1 : 2012:R2017
|
ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
|
API TR 1149 : 2015
|
PIPELINE VARIABLE UNCERTAINTIES AND THEIR EFFECTS ON LEAK DETECTABILITY |
|
ISO 10790:2015
|
Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
|
14/30304116 DC : 0
|
BS EN 1359 - GAS METERS - DIAPHRAGM GAS METERS |
|
BS ISO 8178-1:2017
|
Reciprocating internal combustion engines. Exhaust emission measurement Test-bed measurement systems of gaseous and particulate emissions |
|
UNE-EN 62006:2011
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
|
11/30215951 DC : 0
|
BS ISO 17089-2 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 2: METERS FOR INDUSTRIAL APPLICATIONS |
|
BS ISO 2714:2017
|
Liquid hydrocarbons. Volumetric measurement by displacement meter Volumetric measurement by displacement meter systems other than dispensing pumps |
|
CGSB-157.2 : M91
|
LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - VELOCITY AREA METHODS |
|
BS ISO 6421:2012
|
HYDROMETRY - METHODS FOR ASSESSMENT OF RESERVOIR SEDIMENTATION |
|
07/30113186 DC : 0
|
BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
|
BS 3680-3C:1983
|
MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STREAM FLOW MEASUREMENT - METHODS FOR DETERMINATION OF THE STAGE DISCHARGE RELATION |
|
BS 1339-3:2004
|
Humidity Guide to the measurement of humidity |
|
BS 5792-1(1993) : 1993 AMD 9333
|
MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS - METHOD USING ELECTROMAGNETIC FLOWMETERS |
|
BS ISO 1088:2007
|
HYDROMETRY - VELOCITY-AREA METHODS USING CURRENT-METERS - COLLECTION AND PROCESSING OF DATA FOR DETERMINATION OF UNCERTAINTIES IN FLOW MEASUREMENT |
|
17/30352625 DC : DRAFT SEP 2017
|
BS IEC 62282-8-101 ED1.0 - FUEL CELL TECHNOLOGIES - PART 8-101: ENERGY STORAGE SYSTEMS USING FUEL CELL MODULES IN REVERSE MODE - TEST PROCEDURES FOR SOLID OXIDE SINGLE CELL AND STACK PERFORMANCE INCLUDING REVERSING OPERATION |
|
BS ISO 12764:2017
|
Measurement of fluid flow in closed conduits. Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
|
BS ISO 4360:2008
|
HYDROMETRY - OPEN CHANNEL FLOW MEASUREMENT USING TRIANGULAR PROFILE WEIRS |
|
BS ISO TR 12764:1997
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - FLOWRATE MEASUREMENT BY MEANS OF VORTEX SHEDDING FLOWMETERS INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL |
|
02/706744 DC : DRAFT MAY 2002
|
ISO/DIS 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
|
05/30134787 DC : DRAFT JUNE 2005
|
ISO 1088 - HYDROMETRY - VELOCITY-AREA METHODS - COLLECTION AND PROCESSING OF DATA FOR DETERMINATION OF UNCERTAINTIES IN FLOW MEASUREMENT |
|
BS ISO 7194:2008
|
Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes |
|
API TR 2571 : 2011
|
FUEL GAS MEASUREMENT |
|
ISO 12764:2017
|
Measurement of fluid flow in closed conduits — Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
|
ISO 2714:2017
|
Liquid hydrocarbons — Volumetric measurement by displacement meter |
|
CEI EN 60193 : 2000
|
HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES MODEL ACCEPTANCE TESTS |
|
ISO 9213:2004
|
Measurement of total discharge in open channels Electromagnetic method using a full-channel-width coil |
|
ISO 8178-4:2017
|
Reciprocating internal combustion engines Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications |
|
BS ISO 1217 : 2009
|
DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
|
I.S. EN 12405-3:2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
|
API MPM CH14.3.1:2012
|
ORIFICE METERING OF NATURAL GAS AND OTHER RELATED HYDROCARBON FLUIDS - CONCENTRIC, SQUARE-EDGED ORIFICE METERS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
|
BS ISO 4359 : 2013
|
FLOW MEASUREMENT STRUCTURES - RECTANGULAR, TRAPEZOIDAL AND U-SHAPED FLUMES |
|
ISO 3354:2008
|
Measurement of clean water flow in closed conduits — Velocity-area method using current-meters in full conduits and under regular flow conditions |
|
I.S. EN 14236:2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO 7194:2008
|
Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes |
|
BS EN 60193:1999
|
Hydraulic turbines, storage pumps and pump-turbines. Model acceptance tests |
|
EN 60193:1999
|
Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests |
|
CEI EN 60041 : 1997
|
FIELD ACCEPTANCE TESTS TO DETERMINE THE HYDRAULIC PERFORMANCE OF HYDRAULIC TURBINES, STORAGE PUMPS AND PUMP-TURBINES |
|
UNE-EN ISO 5167-5:2016
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
|
EN 62006:2011
|
Hydraulic machines - Acceptance tests of small hydroelectric installations |
|
PREN 1359 : DRAFT 2014
|
GAS METERS - DIAPHRAGM GAS METERS |
|
EN 12405-1:2005+A2:2010
|
Gas meters - Conversion devices - Part 1: Volume conversion |
|
ISO 17089-1:2010
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
|
API 551 : 2016
|
PROCESS MEASUREMENT |
|
I.S. EN 12261:2002
|
GAS METERS - TURBINE GAS METERS |
|
DIN EN ISO 6817:1995-11
|
MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CONDUITS; METHODS USING ELECTROMAGNETIC FLOW-METERS |
|
DIN EN 1093-6:2008-11
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
|
DIN EN 1093-7:2008-11
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
|
BS EN 13053 : 2006
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
|
ISO 8178-1:2020
|
Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
|
EN ISO 15112:2014
|
NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
|
I.S. EN ISO 6817:1996
|
MEASUREMENT OF CONDUCTIVE LIQUID FLOW IN CLOSED CIRCUITS - METHODS USING ELECTROMAGNETIC FLOWMETERS |
|
UNI EN 1093-6 : 2008
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: SEPARATION EFFICIENCY BY MASS, UNDUCTED OUTLET |
|
UNI EN 1093-7 : 2008
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
|
14/30285986 DC : 0
|
BS ISO 16956 - THERMAL PERFORMANCE IN THE BUILT ENVIRONMENT - DETERMINATION OF AIR FLOW RATE IN BUILDING APPLICATIONS BY FIELD MEASURING METHODS |
|
ISO 5801:2017
|
Fans — Performance testing using standardized airways |
|
SAE AIR 4979 : 2012
|
ESTIMATION OF MEASUREMENT UNCERTAINTY IN ENGINE TESTS BASED ON NATO AGARD UNIFORM ENGINE TEST PROGRAM |
|
BS EN ISO 15112:2014
|
NATURAL GAS - ENERGY DETERMINATION |
|
ISO 2425:2010
|
Hydrometry Measurement of liquid flow in open channels under tidal conditions |
|
12/30258979 DC : 0
|
BS ISO 10790 - MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - GUIDANCE TO THE SELECTION, INSTALLATION AND USE OF CORIOLIS METERS (MASS FLOW, DENSITY AND VOLUME FLOW MEASUREMENTS) |
|
BS ISO 3354:2008
|
Measurement of clean water flow in closed conduits. Velocity-area method using current-meters in full conduits and under regular flow conditions |
|
PD CEN/TR 16787:2014
|
Industrial Gas Installation. Guideline |
|
PREN 14236 : DRAFT 2017
|
ULTRASONIC DOMESTIC GAS METERS |
|
PD ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
|
ISO 29042-5:2010
|
Safety of machinery Evaluation of the emission of airborne hazardous substances Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet |
|
BS EN 12405-3:2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
|
BS 3195-2(1989) : 1989
|
METHODS FOR SAMPLING PETROLEUM PRODUCTS - AUTOMATIC PIPELINE SAMPLING OF LIQUID HYDROCARBONS |
|
11/30215954 DC : 0
|
BS ISO 4359 - LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - RECTANGULAR, TRAPEZOIDAL AND U-SHAPED FLUMES |
|
CEN/TR 12101-4:2009
|
Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation |
|
BS 3680-3A:1980
|
MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS - STREAM FLOW MEASUREMENT - VELOCITY AREA METHODS |
|
BS ISO TR 7066-1:1997
|
ASSESSMENT OF UNCERTAINTY IN CALIBRATION AND USE OF FLOW MEASUREMENT DEVICES - LINEAR CALIBRATION RELATIONSHIPS |
|
ISO/TR 24578:2012
|
Hydrometry Acoustic Doppler profiler Method and application for measurement of flow in open channels |
|
00/122905 DC : DRAFT JULY 2000
|
BS 1339-3 - GUIDE TO THE MEASUREMENT OF HUMIDITY |
|
14/30284736 DC : 0
|
BS EN ISO 5801 - FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
|
ISO 1217:2009
|
Displacement compressors Acceptance tests |
|
BS EN ISO 5167-5:2016
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Cone meters |
|
BS ISO 8178-4:2017
|
Reciprocating internal combustion engines. Exhaust emission measurement Steady-state and transient test cycles for different engine applications |
|
UNE-EN ISO 15112:2014
|
Natural gas - Energy determination (ISO 15112:2011) |
|
DIN EN 12405-3 E : 2016
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
|
BS ISO 17089-1:2019
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC METERS FOR GAS - PART 1: METERS FOR CUSTODY TRANSFER AND ALLOCATION MEASUREMENT |
|
10/30216361 DC : 0
|
BS ISO 29042-9 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 9: DECONTAMINATION INDEX |
|
BS ISO 5801 : 2007
|
INDUSTRIAL FANS - PERFORMANCE TESTING USING STANDARDIZED AIRWAYS |
|
DIN EN ISO 5167-5:2016-10
|
MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
|
SAE AIR 1678 : 2016
|
UNCERTAINTY OF IN-FLIGHT THRUST DETERMINATION |
|
CEI EN 62006 : 2011
|
HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
|
I.S. EN ISO 5167-5:2016
|
MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL - PART 5: CONE METERS (ISO 5167-5:2016) |
|
17/30339487 DC : 0
|
BS EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
|
DIN EN 14236 E : 2008
|
ULTRASONIC DOMESTIC GAS METERS |
|
ISO 20456:2017
|
Measurement of fluid flow in closed conduits — Guidance for the use of electromagnetic flowmeters for conductive liquids |
|
AGA XQ1201 : 2012(R2017)
|
AGA REPORT NO. 3, ORIFICE METERING OF NATURAL GAS - PART 1: GENERAL EQUATIONS AND UNCERTAINTY GUIDELINES |
|
ISO/TR 9464:2008
|
Guidelines for the use of ISO 5167:2003 |
|
ISO 15769:2010
|
Hydrometry Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
|
ISO 17089-2:2012
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
|
ISO 4360:2008
|
Hydrometry Open channel flow measurement using triangular profile weirs |
|
I.S. CEN TR 12101-4:2006
|
SMOKE AND HEAT CONTROL SYSTEMS - PART 4: INSTALLED SHEVS SYSTEMS FOR SMOKE AND HEAT VENTILATION |
|
I.S. EN 62006:2011
|
HYDRAULIC MACHINES - ACCEPTANCE TESTS OF SMALL HYDROELECTRIC INSTALLATIONS |
|
DIN EN ISO 748 E : 2008
|
HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS USING CURRENT-METERS OR FLOATS |
|
DIN EN 13771-1 E : 2017
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
|
DIN EN 1093-1:2009-02
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 1: SELECTION OF TEST METHODS |
|
DIN EN 13771-2:2017-11
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
|
ISO 9300:2005
|
Measurement of gas flow by means of critical flow Venturi nozzles |
|
BS EN ISO 8178-2:1997
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS AT SITE |
|
ISO 14111:1997
|
Natural gas Guidelines to traceability in analysis |
|
ISO 5198:1987
|
Centrifugal, mixed flow and axial pumps Code for hydraulic performance tests Precision grade |
|
UNE-EN 1776:2017
|
Gas infrastructure - Gas measuring systems - Functional requirements |
|
BS EN 14236:2007
|
ULTRASONIC DOMESTIC GAS METERS |
|
BS EN 1776:2015
|
Gas infrastructure. Gas measuring systems. Functional requirements |
|
BS EN ISO 5198 : 1999
|
CENTRIFUGAL, MIXED FLOW AND AXIAL PUMPS - CODE FOR HYDRAULIC PERFORMANCE TESTS - PRECISION CLASS |
|
UNI EN 13053 : 2011
|
VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS |
|
BS EN ISO 3171:1999
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-476: PETROLEUM LIQUIDS - AUTOMATIC PIPELINE SAMPLING |
|
UNE-EN 13771-1:2017
|
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
|
DIN EN ISO 9300:2005-11
|
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
|
ISO 3171:1988
|
Petroleum liquids — Automatic pipeline sampling |
|
ISO 5167-5:2016
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full — Part 5: Cone meters |
|
BS EN 1093-7 : 1999
|
SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 7: SEPARATION EFFICIENCY BY MASS, DUCTED OUTLET |
|
BS EN 12405:2002
|
GAS METERS - GAS-VOLUME ELECTRONIC CONVERSION DEVICES |
|
BS EN ISO 8178-1:1996
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS |
|
ISO 8316:1987
|
Measurement of liquid flow in closed conduits Method by collection of the liquid in a volumetric tank |
|
ISO 748:2007
|
Hydrometry Measurement of liquid flow in open channels using current-meters or floats |
|
EN 24006 : 1993
|
MEASUREMENT OF FLUID FLOW IN CLOSED CIRCUITS - VOCABULARY AND SYMBOLS |
|
EN ISO 6817:1995
|
Measurement of conductive liquid flow in closed conduits - Methods using electromagnetic flow-meters (ISO 6817:1992) |
|
EN ISO 5198:1998
|
CENTRIFUGAL, MIXED FLOW AND AXIAL PUMPS - CODE FOR HYDRAULIC PERFORMANCE TESTS - PRECISION CLASS |
|
EN ISO 5167-5:2016
|
Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) |
|
EN ISO 14111:1999
|
Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
|
EN 1776:2015
|
Gas infrastructure - Gas measuring systems - Functional requirements |
|
EN ISO 3171:1999
|
Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
|
EN 1359:2017
|
Gas meters - Diaphragm gas meters |
|
EN 13771-1:2016
|
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 1: Refrigerant compressors |
|
EN ISO 9300:2005 (edition 2)
|
Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005) |
|
EN ISO 8316:1995
|
Measurement of liquid flow in closed conduits - Method by collection of the liquid in a volumetric tank (ISO 8316:1987) |
|
EN 13771-2:2017
|
Compressors and condensing units for refrigeration - Performance testing and test methods - Part 2: Condensing units |
|
EN 24185:1993/AC:1993
|
MEASUREMENT OF LIQUID FLOW IN CLOSED CONDUITS - WEIGHING METHOD |
|
EN 27842 : 1991
|
Automatic steam traps - Determination of discharge capacity - Test methods (ISO 7842:1988) |
|
EN 29104 : 1993
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - METHODS OF EVALUATING THE PERFORMANCE OF ELECTROMAGNETIC FLOW-METERS FOR LIQUIDS |
|
09/30169001 DC : 0
|
BS ISO 2425 - HYDROMETRY - MEASUREMENT OF LIQUID FLOW IN OPEN CHANNELS UNDER TIDAL CONDITIONS |
|
ASHRAE 51 : 2016
|
LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING |
|
BS ISO 12242:2012
|
MEASUREMENT OF FLUID FLOW IN CLOSED CONDUITS - ULTRASONIC TRANSIT-TIME METERS FOR LIQUID |
|
CGSB-157.4 : M91
|
LIQUID FLOW MEASUREMENT IN OPEN CHANNELS - DETERMINATION OF STAGE-DISCHARGE RELATION |
|
13/30277457 DC : 0
|
BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS |
|
BS EN 62006:2011
|
Hydraulic machines. Acceptance tests of small hydroelectric installations |
|
BS ISO 15769:2010
|
Hydrometry. Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods |
|
PD ISO/TR 24578:2012
|
Hydrometry. Acoustic Doppler profiler. Method and application for measurement of flow in open channels |
|
17/30331584 DC : 0
|
BS ISO 2715 - LIQUID HYDROCARBONS - VOLUMETRIC MEASUREMENT BY TURBINE FLOWMETER |
|
16/30334062 DC : 0
|
BS ISO 8178-1 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 1: TEST-BED MEASUREMENT SYSTEMS OF GASEOUS AND PARTICULATE EMISSIONS |
|
17/30356728 DC : 0
|
BS EN 12261 - GAS METERS - TURBINE GAS METERS |
|
17/30331581 DC : 0
|
BS ISO 2714 - LIQUID HYDROCARBONS - VOLUMETRIC MEASUREMENT BY DISPLACEMENT METER |
|
PREN 12261 : DRAFT 2017
|
GAS METERS - TURBINE GAS METERS |
|
BS 3156-11.0.3(1997) : 1997 AMD 10655
|
ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
|
ISO/TR 12764:1997
|
Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full |
|
09/30190932 DC : 0
|
BS ISO 29042-6 - SAFETY OF MACHINERY - EVALUATION OF THE EMISSION OF AIRBORNE HAZARDOUS SUBSTANCES - PART 6: TEST BENCH METHOD FOR THE MEASUREMENT OF THE SEPARATION EFFICIENCY BY MASS OF AIR CLEANING SYSTEMS WITH DUCTED OUTLET |
|
BS ISO 9213:2004
|
MEASUREMENT OF TOTAL DISCHARGE IN OPEN CHANNELS - ELECTROMAGNETIC METHOD USING A FULL-CHANNEL-WIDTH COIL |
|
ISO/TR 26762:2008
|
Natural gas Upstream area Allocation of gas and condensate |
|
UNI EN ISO 15112 : 2014
|
NATURAL GAS - ENERGY DETERMINATION |
|
PREN 13771-2 : DRAFT 2016
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 2: CONDENSING UNITS |
|
ISO 19970:2017
|
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations |
|
17/30356731 DC : 0
|
BS EN 12405-1 - GAS METERS - CONVERSION DEVICES - PART 1: VOLUME CONVERSION |
|
ISO 15112:2011
|
Natural gas Energy determination |
|
ISO 8178-2:2008
|
Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
|
EN 13053:2006+A1:2011
|
Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
|
ISO 14511:2001
|
Measurement of fluid flow in closed conduits Thermal mass flowmeters |
|
ISO 9123:2017
|
Hydrometry — Stage-fall-discharge relationships |
|
I.S. CEN ISO/TS 25377:2007
|
HYDROMETRIC UNCERTAINTY GUIDANCE (HUG) |
|
I.S. EN ISO 6416:2017
|
HYDROMETRY - MEASUREMENT OF DISCHARGE BY THE ULTRASONIC TRANSIT TIME (TIME OF FLIGHT) METHOD (ISO 6416:2017) |
|
ISO 6817:1992
|
Measurement of conductive liquid flow in closed conduits Method using electromagnetic flowmeters |
|
BS EN ISO 8178-4:1996
|
RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS |
|
BS EN ISO 9300:2005
|
Measurement of gas flow by means of critical flow Venturi nozzles |
|
BS EN 13771-1:2016
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
|
BS EN 1359:2017
|
Gas meters. Diaphragm gas meters |
|
BS EN 13771-2:2017
|
Compressors and condensing units for refrigeration. Performance testing and test methods Condensing units |
|
DIN EN 13771-1:2017-04
|
COMPRESSORS AND CONDENSING UNITS FOR REFRIGERATION - PERFORMANCE TESTING AND TEST METHODS - PART 1: REFRIGERANT COMPRESSORS |
|
EN 12405-3 : 2015
|
GAS METERS - CONVERSION DEVICES - PART 3: FLOW COMPUTER |
|
EN 1093-7:1998+A1:2008
|
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Separation efficiency by mass, ducted outlet |
|
EN ISO 748:2007
|
Hydrometry - Measurement of liquid flow in open channels using current-meters or floats (ISO 748:2007) |