• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 527-1:2012

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Plastics Determination of tensile properties Part 1: General principles
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

29-07-2019

Language(s)

English, French, Russian

Published date

22-02-2012

Preview

ISO 527-1:2012 specifies the general principles for determining the tensile properties of plastics and plastic composites under defined conditions. Several different types of test specimen are defined to suit different types of material which are detailed in subsequent parts of ISO 527.

The methods are used to investigate the tensile behaviour of the test specimens and for determining the tensile strength, tensile modulus and other aspects of the tensile stress/strain relationship under the conditions defined.

The methods are not normally suitable for use with rigid cellular materials, for which ISO 1926 is used, or for sandwich structures containing cellular materials.

DevelopmentNote
Supersedes ISO R 527. (04/2001) DRAFT ISO/DIS 527-1 is also available for this standard. (05/2018)
DocumentType
Standard
Pages
23
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

08/30180284 DC : DRAFT JUNE 2008 BS EN 1465 - ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
02/103631 DC : DRAFT MAY 2002 BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS
UNE-EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
UNI EN ISO 11296-7 : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
12/30264538 DC : 0 BS ISO 27127 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
UNE 104424:2015 Synthetic materials. Application. Waterproofing lining systems for tunnels and galleries made out of manufactured thermoplastic sheets of PVC-P
PREN ISO 7792-2 : DRAFT 2011 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
10/30196141 DC : 0 BS ISO 11119-3 - GAS CYLINDERS OF COMPOSITE CONSTRUCTION - SPECIFICATION AND TEST METHODS - PART 3: FULLY WRAPPED FIBRE REINFORCED COMPOSITE GAS CYLINDERS AND TUBES WITH NON-METALLIC AND NON-LOAD SHARING METAL LINERS
17/30353428 DC : DRAFT JUNE 2017 BS EN 17129 - CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION
DIN EN 15502-2-1:2013-01 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
PREN 13491 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
I.S. EN 1013-4:2000 LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 4: SPECIFIC REQUIREMENTS, TEST METHODS AND PERFORMANCE OF POLYCARBONATE (PC) SHEETS
06/30144978 DC : DRAFT JAN 2006 EN ISO 15014 - PLASTICS - EXTRUDED SHEETS OF POLY(VINYLIDENE FLUORIDE) (PVDF) - REQUIREMENTS AND TEST METHODS
14/30304003 DC : 0 BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES
06/30130313 DC : DRAFT MAR 2006 ISO 23559 - PLASTICS - FILM AND SHEETING - GUIDE FOR THE TESTING OF THERMOPLASTIC FILMS
13/30240164 DC : 0 BS ISO 16365-1 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
16/30338114 DC : 0 BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
16/30334902 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
16/30342057 DC : 0 BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
BS ISO 16525-7:2014 Adhesives. Test methods for isotropic electrically conductive adhesives Environmental test methods
10/30212123 DC : 0 BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS
BS ISO 6402-2 : 94 AMD 10652
17/30349217 DC : 0 BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 8510-2:2010-12 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
13/30263803 DC : 0 BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING
I.S. EN 1013-5:2000 LIGHT TRANSMITTING PROFILED PLASTIC SHEETING FOR SINGLE SKIN ROOFING - PART 5: SPECIFIC REQUIREMENTS, TEST METHODS AND PERFORMANCE OF POLYMETHYLMETHACRYLATE (PMMA) SHEETS
16/30338123 DC : 0 BS EN 16993 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF STORAGE LAGOONS, SECONDARY CONTAINMENT (ABOVE AND BELOW GROUND) AND OTHER CONTAINMENT APPLICATIONS FOR CHEMICALS, POLLUTED WATER AND PRODUCED LIQUIDS
09/30209028 DC : 0 BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
11/30192003 DC : 0 BS EN ISO 7792-2 - PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 124-6:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
ISO 11296-7:2011 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Part 7: Lining with spirally-wound pipes
UNI EN ISO 12215-5 : 2014 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
ISO 527-3:1995 Plastics Determination of tensile properties Part 3: Test conditions for films and sheets
BS EN 4702-05:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Retaining washer
ECMA 247 : 2ED 98 8 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - HH-1 FORMAT
INCITS/ISO/IEC 15521 : 1998 : R2005 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
05/30091855 DC : DRAFT MAR 2005 ISO 1874-2 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 6259-3 E : 2015 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
12/30267857 DC : 0 BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
DIN EN 15860 E : 2012 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
DIN EN 15345:2008-02 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
BS EN 60094-4:1994 Magnetic tape sound recording and reproducing systems Mechanical magnetic tape properties
12/30267848 DC : 0 BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
DIN EN 14963 E : 2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
DIN ISO 16486-1:2015-07 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 1: General (ISO 16486-1:2012 + AMD 1:2014)
04/30115317 DC : 0 BS EN ISO 10350-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS
04/30078976 DC : DRAFT OCT 2004 ISO 22088-3 - PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 3: BENT STRIP METHOD
BS ISO 13586 : 2000 PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
12/30240423 DC : 0 BS ISO 16396-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS
16/30338304 DC : 0 BS ISO/ASTM 52903-1 - ADDITIVE MANUFACTURING - STANDARD SPECIFICATION FOR MATERIAL EXTRUSION BASED ADDITIVE MANUFACTURING OF PLASTIC MATERIALS - PART 1: FEEDSTOCK MATERIALS
INCITS/ISO/IEC 22050 : 2002 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 12,7 MM, 384-TRACK MAGNETIC TAPE CARTRIDGES - ULTRIUM-1 FORMAT
ISO 12215-5:2008 Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination
05/30132152 DC : DRAFT APR 2005 ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY
UNI EN 16240 : 2014 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 16525-7:2014 Adhesives Test methods for isotropic electrically conductive adhesives Part 7: Environmental test methods
BS ISO 5912 : 2003 AMD 15519 CAMPING TENTS
PREN 2719 : 200P1 AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION
INCITS/ISO/IEC 17462 : 2000 : R2006 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
PREN 13160-7 : DRAFT 2014 LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
ASTM D 6779 : 2017 : REDLINE Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
ISO/IEC 15521:1998 Information technology 3,81 mm wide magnetic tape cartridge for information interchange Helical scan recording DDS-3 format using 125 m length tapes
API RP 17B : 2014 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
I.S. EN ISO 8510-2:2010 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREE PEEL
BS EN ISO 21003-2 : 2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
S.R. CLC/TS 50131-2-7-3:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE)
BS EN ISO 12215-1:2000 Small craft. Hull construction and scantlings Materials. Thermosetting resins, glass-fibre reinforcement, reference laminate
UNE-EN 13491:2013 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and associated underground structures
I.S. EN ISO 9093-2:2002 SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC
IEC 60893-2:2003 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
API SPEC 17J : 2014 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
ISO 18872:2007 Plastics Determination of tensile properties at high strain rates
I.S. EN 17098-1:2018 PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
I.S. EN 62333-3:2010 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
I.S. EN 13565-1:2004 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
EN ISO 899-1:2017 Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
BS EN 13493:2013 Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
UNE-EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
EN ISO 9093-2:2002 Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)
UNE-EN 15382:2013 Geosynthetic barriers - Characteristics required for use in transportation infrastructure
BS EN 15382:2013 Geosynthetic barriers. Characteristics required for use in transportation infrastructure
UNI EN 15860 : 2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
I.S. EN ISO 11296-7:2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
16/30317348 DC : 0 BS EN 15860 - PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
EN 13491:2018 Geosynthetic barriers - Characteristics required for use in the construction of tunnels and associated underground structures
NACE RP 03 04 : 2004 DESIGN, INSTALLATION, AND OPERATION OF THERMOPLASTIC LINERS FOR OILFIELD PIPELINES
CSA C22.2 No. 0.17 : 2000 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN 14963:2006 ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 61965:2003 MECHANICAL SAFETY OF CATHODE RAY TUBES
I.S. EN 13655:2018 PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
ASTM D 5935 : 1996 Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998)
I.S. EN ISO 899-1:2017 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP (ISO 899-1:2017)
I.S. EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
ASTM D 5592 : 1994 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
ONORM EN ISO 11403-1 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
ASTM D 6778 : 2014 : REDLINE Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
ASTM D 6865 : 2017 : REDLINE Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
EN 13206:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
I.S. EN ISO 11963:2012 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
ISO 21809-3:2016 Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN 13592:2015-09 (Draft) PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
DIN EN ISO 11403-1 E : 2003 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
DIN EN ISO 4613-2:2004-12 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 14598-3:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
DIN EN ISO 10618:2004-11 Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004)
DIN EN 13483:2013-09 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
DIN EN 26:2015-08 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 14598-2:2005-07 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 2: Methods of test and general requirements
EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN ISO 11403-3 E : 2002 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
BS EN ISO 13628-2:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications
BS EN 14471 : 2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
BS EN 13492:2013 Geosynthetic barriers. Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
BS EN 15347:2007 Plastics. Recycled Plastics. Characterization of plastics waste
BS EN ISO 11248:2000 Plastics. Thermosetting moulding materials. Evaluation of short-term performance at elevated temperatures
BS EN 14415:2004 Geosynthetic barriers. Test method for determining the resistance to leaching
BS EN ISO 527-5:2009 Plastics. Determination of tensile properties Test conditions for unidirectional fibre-reinforced plastic composites
BS EN ISO 1622-2:1999 Plastics. Polystrene (PS) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 11542-2 : 1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 15342 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
UNE-EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
ISO 13628-11:2007 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 11: Flexible pipe systems for subsea and marine applications
BS EN 1873 : 2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
BS EN 14628:2005 Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods
BS EN ISO 15252-2:2000 Plastics. Epoxy powder moulding compounds (EP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 16103:2005 Packaging. Transport packages for dangerous goods. Recycled plastics material
BS EN 60893-2:2004 Insulating materials. Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Methods of test
I.S. EN ISO 7823-1:2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
I.S. EN 89:2015 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
EN 13349:2002 Copper and coppper alloys - Pre-insulated copper tubes with solid covering
EN ISO 21003-2:2008/A1:2011 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes - Amendment 1 (ISO 21003-2:2008/Amd 1:2011)
DIN ISO 5355:2006-05 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
DIN EN 13492:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
CEN/TS 15534-1:2007 Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products
EN 62333-3:2010 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
EN 1013-4:2000 Light transmitting profiled plastic sheeting for single skin roofing - Part 4: Specific requirements, test methods and performance of polycarbonate (PC) sheets
EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
EN 1013:2012+A1:2014 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 13592:2017-05 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
EN 1337-2:2004 Structural bearings - Part 2: Sliding elements
EN 61965:2003 Mechanical safety of cathode ray tubes
EN 50131-2-8:2016 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
DIN EN 15502-2-1:2017-09 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016)
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 13160-7:2016 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
EN 1337-5:2005 Structural bearings - Part 5: Pot bearings
EN 60893-2:2004 Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 2: Methods of test
DIN EN 15382:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
DIN EN ISO 11296-7:2013-05 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
ONORM EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
ONORM EN 12245 : 2012 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
DIN EN ISO 16396-1 E : 2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
BS 2782-1.136(1994) : 1994 AMD 10687 METHODS OF TESTING PLASTICS - THERMAL PROPERTIES - DETERMINATION OF THE SHORT-TERM PERFORMANCE OF THERMOSETTING MOULDING MATERIALS AT ELEVATED TEMPERATURES
ONORM EN ISO 11542-2 : 2009 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 6259-3:2015-11 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
11/30189460 DC : 0 BS IEC 62582-3 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - ELECTRICAL EQUIPMENT CONDITION MONITORING METHODS - PART 3: ELONGATION AT BREAK
02/102695 DC : DRAFT MAY 2002 PREN 14415 - GEOSYNTHETIC BARRIERS - TEST METHOD FOR DETERMINING THE RESISTANCE TO LEACHING
UNE-EN 50290-2-23:2014 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
I.S. EN 4702-03:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
09/30202316 DC : 0 BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
I.S. EN ISO 12086-2:2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DD CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
BS ISO 5834-2:2011 Implants for surgery. Ultra-high-molecular-weight polyethylene Moulded forms
UNE-EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
SAE J 1639 : 1995(S2017) CLASSIFICATION SYSTEM FOR AUTOMOTIVE POLYAMIDE (PA) PLASTICS
16/30340787 DC : 0 BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH
10/30218935 DC : 0 BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. EN 483:2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
BS EN 50290-2-23:2013 Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
ISO/IEC 15757:1998 Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording DA-2 format
UNE 116005:2012 Manufacturing by additive of caps on plastics. Additive manufacturing. Preparation of test pieces
11/30237817 DC : 0 BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
ECMA 315 : 1ED 2000 12,65 MM WIDE MAGNETIC TAPE CASSETTE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DTF-2
BS IEC 61624:1997 Guidance on the development of lists of maximum allowable temperatures for polymeric compounds used in electrotechnical equipment
ISO 11566:1996 Carbon fibre Determination of the tensile properties of single-filament specimens
DIN EN 15382 E : 2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
BS EN ISO 22007-4:2017 Plastics. Determination of thermal conductivity and thermal diffusivity Laser flash method
11/30237814 DC : 0 BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
17/30342710 DC : 0 BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
BS EN 13565-1 : 2003 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
EN 15344:2007 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
12/30268279 DC : 0 BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
BS EN 50131-2-8:2016 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors
12/30267851 DC : 0 BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
98/123516 DC : DRAFT JULY 1998 PREN 13121-1 - GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
16/30317340 DC : 0 BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
NF EN ISO 23936-1 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
ISO 18263-2:2015 Plastics Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Part 2: Preparation of test specimens and determination of properties
05/30102804 DC : DRAFT MAY 2005 ISO 18872 - PLASTICS - DETERMINATION OF TENSILE PROPERTIES AT HIGH STRAIN RATES
UNI EN 15542 : 2008 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
ONORM EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
14/30295038 DC : 0 BS ISO 19095-1 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 1: GUIDELINES FOR THE APPROACH
PREN ISO 1874-1 : DRAFT 2008 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
PREN ISO 11403-1 : DRAFT 2012 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO/DIS 11403-1:2012)
DIN EN 15542 E : 2008 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
EN 4702-05:2017 Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 05: Retaining washer
UNI EN ISO 8510-2 : 2010 ADHESIVES - PEEL TEST FOR A FLEXIBLE-BONDED-TO-RIGID TEST SPECIMEN ASSEMBLY - PART 2: 180 DEGREES PEEL
BS ISO 17194:2007 Structural adhesives. A standard database of properties
17/30360679 DC : DRAFT SEP 2017 BS EN 17152-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND CONVEYANCE AND STORAGE OF NON-POTABLE WATER - BOXES USED FOR INFILTRATION, ATTENUATION AND STORAGE SYSTEMS - PART 1: SPECIFICATIONS FOR STORM WATER BOXES MADE OF PP AND PVC
BS ISO 12891-2:2014 Retrieval and analysis of surgical implants Analysis of retrieved surgical implants
14/30301266 DC : 0 BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
I.S. EN ISO 6259-3:2015 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES (ISO 6259-3:2015)
11/30250549 DC : 0 BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
08/30161535 DC : 0 BS EN ISO 1874-1 - PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION
PREN 13592 : DRAFT 2015 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
BS ISO 2897-2 : 1994 AMD 10661 PLASTICS - IMPACT-RESISTANT POLYSTYRENE (PS-I) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30109201 DC : DRAFT OCT 2004 EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS
BS ISO 7391-2 : 1996 AMD 10746 PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 4894-2 : AMD 10662 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DD CEN/TS 15534-1:2007 Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products
ASTM D 5083 : 2017 : REDLINE Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
INCITS/ISO/IEC 15521 : 1998 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-3 FORMAT USING 125 M LENGTH TAPES
08/30181778 DC : DRAFT JULY 2008 BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
ISO 11119-3:2013 Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners
CSA E61965 : 2004 : R2013 MECHANICAL SAFETY OF CATHODE RAY TUBES
BS EN 50465:2015 European product standard for combined heating power systems using gas fuel
BS ISO 14910-2 : 1997 AMD 16024 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
DIN ISO 5834-2:2014-02 IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS (ISO 5834-2:2011)
UNI EN 15345 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
I.S. EN 4702-05:2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 05: RETAINING WASHER
EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
I.S. EN 13766:2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
PREN 15860 : DRAFT 2016 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
SAE J 2749 : 2017 HIGH STRAIN RATE TENSILE TESTING OF POLYMERS
UNI CEN ISO/TS 24817 : 2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
ISO/TS 19392-1:2018 Paints and varnishes Coating systems for wind-turbine rotor blades Part 1: Minimum requirements and weathering
ISO 20029-2:2017 Plastics Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
I.S. EN 50131-2-8:2016 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS
I.S. EN ISO 22007-4:2017 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
ANSI/AAMI/ISO 15676:2016 CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
16/30330752 DC : 0 BS EN 13766 - THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
PREN 131-2 : DRAFT 2009 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
DIN EN 13361:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
PREN 14471 : DRAFT 2011 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
I.S. EN 124-6:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
DIN EN 13491:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
I.S. EN 17033:2018 PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS
DIN EN 13492:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
ISO 7823-2:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets
SAE J 2642 : 2017 RECOMMENDED PRACTICE FOR DEVELOPING SPECIFICATIONS FOR AUTOMOTIVE THERMOPLASTIC MATERIALS
PREN 14932 : DRAFT 2016 PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL
(INACTIVE RECORD)ASTM D 5336 : 2015-04 CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS
PREN 13362 : DRAFT 2012 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
CLC/TS 50131-2-7-1:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic)
ASTM D 5575 : 2007 : R2013 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM D 4000 : 2016 : REDLINE Standard Classification System for Specifying Plastic Materials
ASTM D 7436 : 2017 : REDLINE Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
ASTM F 2565 : 2013 : REDLINE Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
ASTM D 5575 : 2007 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
ASTM F 2026 : 2017 : REDLINE Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
EN 50465 : 2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
EN ISO 527-3:1995/AC:2002 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
I.S. EN 13361:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
I.S. EN 50465:2015 GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW
S.R. CLC/TS 50131-2-7-2:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE)
ISO 22621-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) Polyamide (PA) Part 1: General
IEC 62899-201:2016 Printed electronics - Part 201: Materials - Substrates
DIN EN 89:2015-08 GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
DIN EN 13206:2015-09 (Draft) PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
DIN EN 1465:2009-07 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
DIN EN 13493:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
DIN EN 15347:2008-02 Plastics - Recycled Plastics - Characterisation of plastics wastes
DIN EN 14427:2014-09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
DIN EN 15346 E : 2015 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14716:2005-03 Stretched ceilings - Requirements and tests methods; German version EN 14716:2004
DIN EN 14471:2015-03 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 14530-2:2000-08 Plastics - Unsaturated-polyester powder moulding compounds (UP-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14530-2:1999); German version EN ISO 14530-2:1999
DIN EN 15347 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
DIN EN 13361:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
DIN EN 1337-5:2005-07 Structural bearings - Part 5: Pot bearings
BS EN ISO 4894-2:1999 Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 4613-2:1995 Plastics. Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 15526-2:2004 Plastics. Polyketone (PK) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 1465:2009 Adhesives. Determination of tensile lap-shear strength of bonded assemblies
BS EN 295-4:2013 Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
ISO/TS 24817:2006 Petroleum, petrochemical and natural gas industries Composite repairs for pipework Qualification and design, installation, testing and inspection
BS EN 26:1998 Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
UNE-EN ISO 11403-1:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
BS EN ISO 14528-2:2000 Plastics. Melamine-formaldehyde powder moulding compounds (MF-PMCs) Preparation of test specimens and determination of properties
ISO 527-5:2009 Plastics Determination of tensile properties Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
BS EN 1337-5:2005 Structural bearings Pot bearings
BS EN 1013-4:2000 Light transmitting profiled plastic sheeting for single skin roofing Specific requirements, test methods and performance of polycarbonate (PC) sheets
BS EN 1337-2:2004 Structural bearings Sliding elements
BS EN 14716:2004 Stretched ceilings. Requirements and test methods
BS EN ISO 10618:2004 Carbon fibre. Determination of tensile properties of resin-impregnated yarn
BS EN 14598-2:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Methods of test and general requirements
I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
I.S. EN 14471:2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN ISO 6259-1:2002-02 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
I.S. EN ISO 15526-2:2004 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 13160-7:2016 LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS
I.S. EN ISO 13628-2:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN ISO 9523:2016-05 TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS (ISO 9523:2015)
I.S. EN 13592:2017 PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
I.S. EN ISO 10618:2004 CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESINIMPREGNATED YARN
I.S. EN ISO 11403-1:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
I.S. EN 13483:2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
I.S. EN 60893-2:2004 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
I.S. EN ISO 527-2:2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS (ISO 527-2:2012)
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
I.S. EN 131-2:2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
I.S. EN ISO 14663-2:2006 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM ISO 5355 : 2006 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
DIN 53363:2003-10 Determining the tear resistance of plastic film and sheeting by the trouser tear method
I.S. EN 14628:2005 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
I.S. EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
EN ISO 11963:2012 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
I.S. EN 26:2015 GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER
I.S. EN ISO 527-5:2009 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
I.S. EN ISO 4894-2:1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 1873:2014 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
I.S. EN ISO 10432:2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT
I.S. EN ISO 11403-3:2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
I.S. EN ISO 11542-2:1999 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 11963:2013-03 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012)
I.S. EN ISO 6259-1:2015 THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015)
I.S. EN 12814-2:2000 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST
DIN 16972:1995-03 COMPRESSION MOULDED PLATES MADE OF POLYETHYLENE HIGH DENSITY (PE-UHMW), (PE-HMW), (PE-HD) - TECHNICAL SPECIFICATIONS
DIN EN ISO 15526-2:2004-10 PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 11542-2:1998/AC:2008 PLASTICS - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE (PE-UHMW) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
I.S. EN 295-4:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
I.S. EN 14427:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
EN 12814-2:2000 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST
DIN EN 1873:2016-07 PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS
DIN EN ISO 12215-5:2014-10 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
I.S. EN 1465:2009 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH OF BONDED ASSEMBLIES
I.S. EN 12245:2009 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
VDI 3388:2012-03 Materials for trimming and forming dies
BS 2782-9 Method 910A:1996 Methods of testing plastics. Sampling and test specimen preparation Injection moulding test specimens of thermoplastic materials
VDI 3405 Blatt 1:2013-10 Additive manufacturing processes, rapid manufacturing - Laser sintering of polymer parts - Quality control
ONORM EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
NBR ISO 16486-1 : 2013 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL
ASME PCC 2 : 2015 REPAIR OF PRESSURE EQUIPMENT AND PIPING
VDI 2019:2016-04 Testing the adhesion of thermoplastic elastomers (TPE) on substrates
DIN EN ISO 21003-2:2011-07 Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008 + Amd 1:2011) (includes Amendment A1:2011)
DIN EN 15836-1:2010-11 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
BS EN 62333-3:2010 Noise suppression sheet for digital devices and equipment Characterization of parameters of noise suppression sheet
PREN 13766 : DRAFT 2016 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
DIN EN ISO 22007-4:2016-10 (Draft) PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
14/30292915 DC : 0 BS ISO 18488 - POLYETHYLENE (PE) MATERIALS FOR PIPING SYSTEMS - DETERMINATION OF STRAIN HARDENING MODULUS IN RELATION TO SLOW CRACK GROWTH - TEST METHOD
BS EN 4702-03:2017 Aerospace series. Quick release fastening systems for non-structural and lining applications Stud - quick-release and locking
11/30211349 DC : 0 BS ISO 13636 - PLASTICS - FILM AND SHEETING - NON-ORIENTED POLY(ETHYLENE TEREPHTHALATE) (PET) SHEETS
08/30165041 DC : DRAFT FEB 2008 BS ISO 28078-1 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
DIN EN 1013:2015-03 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
16/30341197 DC : 0 BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
BS EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods
I.S. EN ISO 22088-4:2007 PLASTICS - DETERMINATION OF RESISTANCE TO ENVIRONMENTAL STRESS CRACKING (ESC) - PART 4: BALL OR PIN IMPRESSION METHOD
14/30295044 DC : 0 BS ISO 19095-3 - ADHESIVES - EVALUATION OF THE ADHESION INTERFACE PERFORMANCE IN PLASTIC-METAL ASSEMBLIES - PART 3: TEST METHODS
DIN ISO 5912 E : 2004 CAMPING TENTS
14/30283167 DC : 0 BS ISO 18263-2 - PLASTICS - MIXTURES OF POLYPROPYLENE (PP) AND POLYETHYLENE (PE) RECYCLATE DERIVED FROM PP AND PE USED FOR FLEXIBLE AND RIGID CONSUMENR PACKAGING - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 13781:2017 Implants for surgery. Homopolymers, copolymers and blends on poly(lactide). In vitro degradation testing
ISO 29221:2014 Plastics Determination of mode I plane-strain crack-arrest toughness
UNI EN 15347 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF PLASTICS WASTES
ESPECIFICACION UNE 0059:2017 Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines
12/30258334 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30240167 DC : 0 BS ISO 16365-2 - PLASTICS - THERMOPLASTIC POLYURETHANES FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DD CLC/TS 50131-2-7-2:2009 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive)
BS 2782-3.326F(1997) : 1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
UNI EN ISO 23936-1 : 2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
DIN ISO 5355 E : 2006 ALPINE SKI-BOOTS - REQUIREMENTS AND TEST METHODS
INCITS/ISO/IEC 15757 : 1998 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT
BS ISO 18263-2:2015 Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging Preparation of test specimens and determination of properties
12/30274859 DC : 0 BS ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS
17/30335121 DC : 0 BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
15/30320571 DC : 0 BS EN 60335-1 ED 5.0 /A2 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN ISO 16396-1:2015 Plastics. Polyamide (PA) moulding and extrusion materials Designation system, marking of products and basis for specifications
DIN EN 124-6 E : 2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U)
16/30337302 DC : 0 BS EN ISO 22007-4 - PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD
01/121538 DC : DRAFT APRIL 2001 BS EN ISO 899-1 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS ISO 18488:2015 Polyethylene (PE) materials for piping systems. Determination of Strain Hardening Modulus in relation to slow crack growth. Test method
ISO 13636:2012 Plastics — Film and sheeting — Non-oriented poly(ethylene terephthalate) (PET) sheets
06/30146370 DC : DRAFT SEP 2006 ISO 15439-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 4 BAR - POLYAMIDE (PA) - PART 1: GENERAL
BS ISO 18872:2007 Plastics. Determination of tensile properties at high strain rates
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30113880 DC : DRAFT MAY 2004 BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING BALES - REQUIREMENTS AND TEST METHODS
12/30263853 DC : 0 BS EN 4702-03 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - STUD - QUICK-RELEASE AND LOCKING
BS ISO 10366-2 : 94 AMD 10665 PLASTICS - METHYL METHYLACRYLATE/ACRYLONITRILE/BUTADIENE/STYRENE (MABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30091878 DC : DRAFT FEB 2004 BS EN ISO 13000-2 - PLASTICS - POLYTETRAFLUOROETHYLENE (PTFE) SEMI-FINISHED PRODUCTS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/30091867 DC : DRAFT FEB 2004 BS EN ISO 12086-1 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
CEI EN 62333-3 : 2011 NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERIZATION OF PARAMETERS OF NOISE SUPPRESSION SHEET
DIN EN 14963:2006-12 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
BS ISO 2580-2 : 94 AMD 10660 PLASTICS - ACRYLONITRILE/BUTADIENE/STYRENE (ABS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
BS ISO 1163-2 : 1995 AMD 10744 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS
08/30165044 DC : DRAFT FEB 2008 BS ISO 28078-2 - PLASTICS - POLY(PHENYLENE SULFIDE) (PPS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
11/30238648 DC : DRAFT FEB 2011 BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN 4702-03 : 2017 AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - PART 03: STUD - QUICK-RELEASE AND LOCKING
04/30122412 DC : DRAFT SEP 2004 ISO 17194 - STRUCTURAL ADHESIVES - STANDARD DATABASE OF PROPERTIES
ASTM D 6835 : 2017 : REDLINE Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
BS ISO 1622-2 : 1995 AMD 10649 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 24817:2017 Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection
DIN ISO 16486-1 E : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 1: GENERAL (ISO 16486-1:2012 + AMD 1:2014)
IEC 61965:2003 Mechanical safety of cathode ray tubes
DIN EN ISO 11296-7 E : 2013 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES (ISO 11296-7:2011)
DIN EN ISO 16396-1:2015-05 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
API 14A : 2015 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
DIN EN 13766:2010-11 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics
UNI EN 15342 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLYSTYRENE (PS) RECYCLATES
BS EN 1013 : 2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN ISO 24817:2017 Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection
I.S. EN 16240:2013 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS EN 15502-2-1 : 2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
I.S. EN 13491:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
ASTM D 5938 : 1996 Standard Test Method for Determination of Tensile Properties (Withdrawn 1998)
UNE-EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
I.S. EN ISO 13628-11:2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 13362:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
BS EN ISO 11296-7:2013 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
ISO 12215-1:2000 Small craft — Hull construction and scantlings — Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate
PREN 13655 : DRAFT 2016 PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE
I.S. EN 15836-1:2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
EN 17098-1:2018 Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films
EN 13207:2018 Plastics - Thermoplastic silage films and tubes for use in agriculture
I.S. EN ISO 24817:2017 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01)
BS EN ISO 12215-5 : 2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION
ASTM D 5857 : 2017 : REDLINE Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
ISO 6993-3:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
ISO 5355:2005 Alpine ski-boots Requirements and test methods
DIN EN 13565-1:2016-08 (Draft) FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
ISO 10432:2004 Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment
ISO 6993-2:2006 Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
ISO 16486-1:2012 Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing Part 1: General
EN 13766:2010 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
EN ISO 20029-2:2018 Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimen and determination of properties (ISO 20029-2:2017)
ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas Specification
PREN 17096 : DRAFT 2017 GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS
ISO 4587:2003 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
EN 14932:2018 Plastics - Thermoplastic stretch films for wrapping silage bales
EN 17033:2018 Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods
IEC 62642-2-72:2015 Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive)
I.S. EN 13207:2018 PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
UNI EN ISO 11403-1 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
I.S. EN ISO 527-3:1996 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS
IEC 61241-1-1:1999 Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
UNE-EN 15860:2011 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
UNE-EN 13160-7:2017 Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets
ISO 17194:2007 Structural adhesives A standard database of properties
DIN EN ISO 22088-4:2006-11 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
DIN EN 12245:2012-03 Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011)
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 13628-2:2006/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
BS EN 13206:2017 Plastics. Thermoplastic covering films for use in agriculture and horticulture
DIN EN 13566-7:2007-06 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
DIN EN ISO 527-4:1997-07 Determination of tensile properties of plastics - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
DIN EN 295-4:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 14628 E : 2006 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
DIN EN 14471 E : 2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
DIN EN 14867 E : 2005 PACKAGING - PLASTIC FREEZER BAGS - SPECIFICATIONS AND TEST METHODS
DIN EN 1337-5 E : 2005 STRUCTURAL BEARINGS - PART 5: POT BEARINGS
DIN EN 15346:2015-01 PLASTICS - RECYCLED PLASTICS - CHARACTERIZATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 15342:2008-02 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
DIN EN ISO 11403-3:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
DIN EN 1337-2:2004-07 Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004
DIN EN 15344:2008-02 Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates
DIN EN ISO 11403-1:2014-09 Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties (ISO 11403-1:2014)
ISO 9523:2015 Touring ski-boots for adults — Interface with touring ski-bindings — Requirements and test methods
DIN EN 13206:2017-05 PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
BS EN ISO 12086-2:2006 Plastics. Fluoropolymer dispersions and moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN 1013-5:2000 Light transmitting profiled plastic sheeting for single skin roofing Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
BS EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
BS EN 13592:2017 Plastics sacks for household waste collection. Types, requirements and test methods
ISO 1163-2:1995 Plastics Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
DIN EN 15344 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
I.S. EN ISO 294-3:2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES
UNE-EN ISO 12215-5:2008 Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008)
ONORM EN 13766 : 2010 THERMOPLASTIC MULTI-LAYER (NON-VULCANIZED) HOSES AND HOSE ASSEMBLIES FOR THE TRANSFER OF LIQUID PETROLEUM GAS AND LIQUEFIED NATURAL GAS - SPECIFICATION
UNE-EN ISO 11963:2013 Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012)
UNE-EN 60730-1:2013 Automatic electrical controls for household and similar use - Part 1: General requirements
C22.2 NO. 18.5-13 (R2018) Positioning devices (Bi-national standard, with UL 1565)
EN ISO 14663-2:2006 Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999)
DIN EN 14427 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
CSA C22.2 No. 18.5:2013 POSITIONING DEVICES
EN ISO 294-3 : 2003 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - PART 3: SMALL PLATES
EN 1504-5:2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
EN 16240:2013 Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
EN ISO 22007-4:2017 Plastics - Determination of thermal conductivity and thermal diffusivity - Part 4: Laser flash method (ISO 22007-4:2017)
UNI EN 1465 : 2009 ADHESIVES - DETERMINATION OF TENSILE LAP-SHEAR STRENGTH BONDED ASSEMBLIES
BS 1970:2006 Hot water bottles manufactured from rubber and PVC. Specification
UNI EN 1337-2 : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
EN 50465:2015 Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW
UNI EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
UNI EN ISO 11963 : 2013 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
EN ISO 10432:2004 Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004)
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 295-4 : 2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
UNI EN ISO 13628-2 : 2007 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN 1504-5 : 2013 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
EN 483:1999/A4:2007 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
I.S. EN ISO 14126:2000 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
UNI EN 12245 : 2011 TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS
UNI EN ISO 527-2 : 2012 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS
UNI EN 13483 : 2013 RUBBER AND PLASTIC HOSES AND HOSE ASSEMBLIES WITH INTERNAL VAPOUR RECOVERY FOR MEASURED FUEL DISPENSING SYSTEMS - SPECIFICATION
UNI EN ISO 13628-11 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
UNI EN ISO 12086-2 : 2006 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ONORM EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
BS EN ISO 20029-2:2018 Plastics. Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion Preparation of test specimens and determination of properties
16/30338108 DC : DRAFT JULY 2016 BS EN 13362 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
I.S. EN ISO 10350-1:2017 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 1: MOULDING MATERIALS (ISO 10350-1:2017)
12/30267854 DC : 0 BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN CONSTRUCTION AND TUNNELS AND ASSOCIATED UNDER GROUND STRUCTURES
12/30267845 DC : 0 BS EN 13361 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
BS ISO 11566:1996 Carbon fibre. Determination of the tensile properties of single-filament specimens
DIN EN 15542:2008-06 Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
12/30258456 DC : 0 BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS
ISO/IEC 15718:1998 Information technology Data interchange on 8 mm wide magnetic tape cartridge Helical scan recording HH-1 format
12/30255180 DC : 0 BS EN ISO 11403-1 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES
UNI EN 15344 : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
BS ISO 16365-2:2014 Plastics. Thermoplastic polyurethanes for moulding and extrusion Preparation of test specimens and determination of properties
11/30248330 DC : 0 BS ISO 17467-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS JOINTED BY SOLVENT CEMENT - PART 1: GENERAL
BS ISO 7792-2 : 1997 AMD 15252 PLASTICS - THERMOPLASTIC POLYESTER (TP) MOULDING AND EXTRUSION MATERIALS - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 15836-1 : 2010 PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM
BS ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems jointed by solvent cement General
02/102694 DC : DRAFT MAY 2002 PREN 14414 - GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
BS EN 15836-1:2010 Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
08/30176958 DC : DRAFT JAN 2008 BS EN 62333-3 - NOISE SUPPRESSION SHEET FOR DIGITAL DEVICES AND EQUIPMENT - PART 3: CHARACTERISTICS OF PARAMETERS OF NOISE SUPPRESSION SHEET
10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
11/30236286 DC : 0 BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
CEI EN 50290-2-23 : 2014 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
05/30137738 DC : DRAFT AUG 2005 ISO 9523 - TOURING SKI-BOOTS FOR ADULTS - INTERFACE WITH TOURING SKI-BINDINGS - REQUIREMENTS AND TEST METHODS
12/30264198 DC : 0 BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
16/30338117 DC : 0 BS EN 13493 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
BS 2782-3.326G(1997) : 1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
ASTM D 5927 : 2017 : REDLINE Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
BS EN ISO 21809-3:2016 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings
11/30242905 DC : 0 BS EN ISO 3673-2 - PLASTICS - EPOXY RESINS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
ISO 11963:2012 Plastics Polycarbonate sheets Types, dimensions and characteristics
DIN EN 15345 E : 2008 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
10/30196135 DC : 0 BS ISO 11515 - GAS CYLINDERS - REFILABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
11/30229997 DC : 0 BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
I.S. EN 15502-2-1:2012 GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW
05/30128281 DC : DRAFT JAN 2005 ISO 9988-2 - PLASTICS - POLYOXYMETHYLENE (POM) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
INCITS/ISO/IEC 17462 : 2000 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
PREN 13565-1 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
DD CLC/TS 50131-2-7-1:2009 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic)
BS 7825-3.3:1997 Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of plastics
DIN EN 16240:2014-03 LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30274529 DC : 0 BS EN ISO 6259-3 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 3: POLYOLEFIN PIPES
15/30296854 DC : 0 BS ISO 13781 - INPLANTS FOR SURGERY - HOMOPOLYMERS, COPOLYMERS AND BLENDS ON POLY(LACTIDE) - IN VITRO DEGRADATION TESTING
PREN 13493 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
BS ISO 14663-2 : 1999 AMD 16029 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
00/717312 DC : 0 PREN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES, DESIGN STRESSES, SCANTLING DETERMINATION
PREN 13492 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
BS EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production Part 1: Thermoplastics
03/119348 DC : 0 PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS
DD CEN/TS 15534-2:2007 Wood-plastics composites (WPC) Characterisation of WPC materials
BS EN 61965:2003 Mechanical safety of cathode ray tubes
17/30360581 DC : 0 BS ISO 5834-2 - IMPLANTS FOR SURGERY - ULTRA-HIGH-MOLECULAR-WEIGHT POLYETHYLENE - PART 2: MOULDED FORMS
ISO 15814:1999 Implants for surgery Copolymers and blends based on polylactide In vitro degradation testing
14/30256269 DC : 0 BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
13/30242622 DC : 0 BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS
11/30203571 DC : DRAFT MAR 2011 BS ISO 29221 - PLASTICS - DETERMINATION OF MODE 1 PLANE-STRAIN CRACK-ARREST TOUGHNESS
CLC/TS 50131-2-7-2:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive)
03/118818 DC : DRAFT DEC 2003 BS EN ISO 7391-2 - PLASTICS - POLYCARBONATE (PC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CSA ISO/IEC 17462 :2004 INFORMATION TECHNOLOGY - 3,81 MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DDS-4 FORMAT
I.S. EN ISO 14632:1999 EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
BS EN 15345:2007 Plastics. Recycled plastics. Characterization of polypropylene (PP) recyclates
DD ISO/TS 24817 : 2006 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
UNI EN ISO 21003-2 : 2011 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
BS EN 15542:2008 Ductile iron pipes, fittings and accessories. External cement mortar coating for pipes. Requirements and test methods
ISO 13586:2000 Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach
PREN 13207 : DRAFT 2016 PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
CAN/CSA-ISO/IEC 17462-04 (R2014) Information Technology - 3,81 mm Wide Magnetic Tape Cartridge for Information Interchange - Helical Scan Recording - DDS-4 Format (Adopted ISO/IEC 17462:2000, first edition, 2000-09-15)
CSA E61965 : 2004 MECHANICAL SAFETY OF CATHODE RAY TUBES
17/30325386 DC : 0 BS ISO 18250-1- CONNECTORS FOR RESERVOIR DELIVERY SYSTEMS - PART 1: GENERAL REQUIREMENTS AND COMMON TEST METHODS
BS ISO 12086-2 : 2001 AMD 10637 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS
UNE-EN ISO 8510-2:2011 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2:2006)
API 17J REDLINE : 2008 SPECIFICATION FOR UNBONDED FLEXIBLE PIPE
UNE-EN 50131-2-8:2017 Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors
API 14A RUSSIAN : 2001 SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT
API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
NF EN 61965 : 2004 MECHANICAL SAFETY OF CATHODE RAY TUBES
I.S. EN 13492:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
BS IEC 62899-201 : 2016 PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES
CSA C22.2 No. 0.17 : 2000 : R2013 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
I.S. EN ISO 20029-2:2018 PLASTICS - THERMOPLASTIC POLYESTER/ESTER AND POLYETHER/ESTER ELASTOMERS FOR MOULDING AND EXTRUSION - PART 2: PREPARATION OF TEST SPECIMEN AND DETERMINATION OF PROPERTIES (ISO 20029-2:2017)
ISO 7076-2:2012 Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
I.S. EN ISO 21003-2:2008 MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 2: PIPES
I.S. EN 1013:2012 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
UNE-EN 13361:2013 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
UNE-EN 13362:2013 Geosynthetic barriers - Characteristics required for use in the construction of canals
DIN EN 15860:2016-07 (Draft) PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
BS EN 17098-1:2018 Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films
UNE-EN 13766:2011 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas - Specification
BS EN ISO 9093-2:2002 Small craft. Seacocks and through-hull fittings Non-metallic
ONORM EN ISO 12215-5 : 2014 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014)
14/30311128 DC : 0 BS EN 14716 - STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
EN 13493:2018 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
ASTM F 3091/F3091M : 2014 Standard Specification for Powder Bed Fusion of Plastic Materials
ASTM D 5592 : 1994 : R2010 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
I.S. EN ISO 12215-5:2008 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008)
EN ISO 12215-5:2008/A1:2014 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008/AMD 1:2014)
ISO 16365-2:2014 Plastics Thermoplastic polyurethanes for moulding and extrusion Part 2: Preparation of test specimens and determination of properties
EN 15382:2018 Geosynthetic barriers - Characteristics required for use in transportation infrastructure
ISO 12891-2:2014 Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants
EN 13492:2018 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
ISO 9093-2:2002 Small craft Seacocks and through-hull fittings Part 2: Non-metallic
EN ISO 11296-7:2013 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
ISO 15676:2016 Cardiovascular implants and artificial organs — Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
EN 13361:2018 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams
ISO 11515:2013 Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 L and 3000 L — Design, construction and testing
I.S. EN ISO 23936-1:2009 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 1: THERMOPLASTICS
S.R. CEN/TS 15534-2:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 2: CHARACTERISATION OF WPC MATERIALS
I.S. EN 15345:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYPROPYLENE (PP) RECYCLATES
I.S. EN 13493:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
I.S. EN 60730-1:2016 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
I.S. EN 15382:2013 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
IEC 62642-2-73:2015 Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active)
I.S. EN 13362:2018 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
UNI EN ISO 11403-3 : 2014 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES
ISO 899-1:2017 Plastics — Determination of creep behaviour — Part 1: Tensile creep
I.S. EN 15542:2008 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL CEMENT MORTAR COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
I.S. EN 13206:2017 PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
DIN EN ISO 7823-1:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS
DIN EN 14716 E : 2005 STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
DIN EN 1337-2 E : 2004 STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS
DIN EN ISO 16103:2005-09 Packaging - Transport packaging for dangerous goods - Recycled plastics material (ISO 16103:2005)
DIN EN ISO 11542-2:2010-01 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 11542-2:1998 + Cor. 1:2007) (includes Corrigendum AC:2008)
DIN EN 14415 E : 2004 GEOSYNTHETIC BARRIERS - TEST METHOD FOR DETERMINING THE RESISTANCE TO LEACHING
DIN EN ISO 7823-2:2003-12 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
BS EN ISO 14529-2:2000 Plastics. Melamine/phenolic powder moulding compounds (MP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 10432:2004 Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment
BS EN ISO 14126:1999 Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction
BS EN ISO 22088-4:2006 Plastics. Determination of resistance to environmental stress cracking (ESC) Ball or pin impression method
BS EN 60730-1:2011 Automatic electrical controls for household and similar use General requirements
BS EN ISO 10724-2:2001 Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates
ISO 14528-2:1999 Plastics Melamine-formaldehyde powder moulding compounds (MF-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN 13566-7:2007 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
ISO 11403-3:2014 Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties
EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
BS EN ISO 527-4:1997 Plastics. Determination of tensile properties Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
BS EN ISO 294-3:2003 Plastics. Injection moulding of test specimens of thermoplastic materials Small plates
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN 13160-7:2003 Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets
BS EN 131-2 : 2010 LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING
BS EN 12814-2:2000 Testing of welded joints of thermoplastics semi-finished products Tensile test
BS EN 14427:2014 LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction
ISO 18488:2015 Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
BS EN 13349:2002 Copper and copper alloys. Pre-insulated copper tubes with solid covering
ISO 14530-2:1999 Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7823-2:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets
ISO 21003-2:2008 Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes
UNE-EN 13592:2017 Plastics sacks for household waste collection - Types, requirements and test methods
ISO 10724-2:1998 Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
ISO 4894-2:1995 Plastics Styrene/acrylonitrile (SAN) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 6259-1:2015 Thermoplastics pipes Determination of tensile properties Part 1: General test method
ISO 14529-2:1999 Plastics Melamine/phenolic powder moulding compounds (MP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 16396-1:2015 Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications
UNE-EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
ISO 12086-2:2006 Plastics Fluoropolymer dispersions and moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
ISO 7823-1:2003 Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets
BS EN ISO 14527-2:2000 Preparation of test specimens and determination of properties
ISO 294-3:2002 Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates
ISO 11403-1:2014 Plastics Acquisition and presentation of comparable multipoint data Part 1: Mechanical properties
ISO 10618:2004 Carbon fibre — Determination of tensile properties of resin-impregnated yarn
BS EN 1504-5:2013 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Concrete injection
BS EN ISO 7823-1:2003 Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets
BS EN 483 : 2000 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
ISO 10350:1993 Plastics Acquisition and presentation of comparable single-point data
BS EN 14598-3:2005 Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC) Specific requirements
ISO 1622-2:1995 Plastics Polystyrene (PS) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 6259-1:2015 Thermoplastics pipes. Determination of tensile properties General test method
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
11/30233799 DC : 0 BS EN 60730-1 ED5 - AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 1: GENERAL REQUIREMENTS
ISO 11542-2:1998 Plastics Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
UNE-EN 12245:2009 Transportable gas cylinders - Fully wrapped composite cylinders
ISO 14526-2:1999 Plastics Phenolic powder moulding compounds (PF-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN 1013:2013 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods
UNE-EN 1873:2015 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
BS EN 14575:2005 Geosynthetic barriers. Screening test method for determining the resistance to oxidation
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
IEC 62333-3:2010 Noise suppression sheet for digital devices and equipment - Part 3: Characterization of parameters of noise suppression sheet
UNE-EN 13206:2017 Plastics - Thermoplastic covering films for use in agriculture and horticulture
ISO 14126:1999 Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction
UNE-EN ISO 11403-3:2014 Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014)
BS EN 15342:2007 Plastics. Recycled plastics. Characterization of polystyrene (PS) recyclates
UNE-EN 89:2016 Gas-fired storage water heaters for the production of domestic hot water
BS EN ISO 14663-2:2006 Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties
UNE-EN 26:2016 Gas-fired instantaneous water heaters for the production of domestic hot water
BS EN 14414:2004 Geosynthetics. Screening test method for determining chemical resistance for landfill applications
ISO 6259-3:2015 Thermoplastics pipes Determination of tensile properties Part 3: Polyolefin pipes
ISO 13628-2:2006 Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications
BS EN ISO 11403-1:2014 Plastics. Acquisition and presentation of comparable multipoint data Mechanical properties
BS EN ISO 14526-2:2000 Plastics. Phenolic powder moulding compounds (PF-PMCs) Preparation of test specimens and determination of properties
ISO 22088-4:2006 Plastics Determination of resistance to environmental stress cracking (ESC) Part 4: Ball or pin impression method
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
EN ISO 10618 : 2004 CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESIN-IMPREGNATED YARN
EN 15342:2007 Plastics - Recycled Plastics - Characterization of polystyrene (PS) recyclates
EN 89:2015 Gas-fired storage water heaters for the production of domestic hot water
EN ISO 1163-2 : 1999 PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 14628:2005 Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods
EN ISO 15252-2 : 1999 PLASTICS - EPOXY POWDER MOULDING COMPOUNDS (EP-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
EN 14598-2:2005/AC:2006 REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS
EN 14963:2006 Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods
EN ISO 14529-2 : 1999 PLASTICS - MELAMINE/PHENOLIC POWDER MOULDING COMPOUNDS (MP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 13592:2017 Plastics sacks for household waste collection - Types, requirements and test methods
EN 14867:2005 Packaging - Plastic freezer bags - Specifications and test methods
EN 15347:2007 Plastics - Recycled Plastics - Characterisation of plastics wastes
EN ISO 4613-2:1995/A1:2004 PLASTICS - ETHYLENE/VINYL ACETATE (E/VAC) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 15526-2:2004 Plastics - Polyketone (PK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 15526-2:2000)
EN ISO 12086-2:2006/AC:2009 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15345:2007 Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
EN ISO 10350-1:2017 Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
EN ISO 14126:1999/AC:2002 FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 22088-4:2006 Plastics - Determination of resistance to environmental stress cracking (ESC) - Part 4: Ball or pin impression method (ISO 22088-4:2006)
EN ISO 11248 : 1999 Plastics - Thermosetting moulding materials - Evaluation of short-term performance at elevated temperatures (ISO 11248:1993)
EN ISO 16103:2005 Packaging - Transport packages for dangerous goods - Recycled plastics material (ISO 16103:2005)
EN ISO 10724-2 : 2000 PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOSETTING POWDER MOULDING COMPOUNDS (PMCS) - PART 2: SMALL PLATES
EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation
EN 14716:2004 Stretched ceilings - Requirements and test methods
EN 1873:2014+A1:2016 Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods
EN 1465:2009 Adhesives - Determination of tensile lap-shear strength of bonded assemblies
EN 14415:2004 Geosynthetic barriers - Test method for determining the resistance to leaching
EN 15502-2-1:2012+A1:2016 Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW
EN ISO 6259-3:2015 Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
EN ISO 7823-1:2003 Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003)
EN 26:2015 Gas-fired instantaneous water heaters for the production of domestic hot water
EN ISO 8510-2:2010 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180 degree peel (ISO 8510-2:2006)
EN ISO 1622-2 : 1999 PLASTICS - POLYSTYRENE (PS) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 6259-1:2015 Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
EN ISO 4894-2 : 1999 PLASTICS - STYRENE/ACRYLONITRILE (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 23936-1:2009 Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009)
EN 12245:2009+A1:2011 Transportable gas cylinders - Fully wrapped composite cylinders
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN 15542:2008 Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods
EN ISO 7823-2 : 2003 PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS
EN ISO 16396-1:2015 Plastics - Polyamide (PA) moulding and extrusion materials - Part 1: Designation system, marking of products and basis for specifications (ISO 16396-1:2015)
EN 14598-3:2005 Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
EN 15836-1:2010 Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
EN ISO 14527-2 : 1999 PLASTICS - UREA-FORMALDEHYDE AND UREA/MELAMINE-FORMALDEHYDE POWDER MOULDING COMPOUNDS (UF- AND UF/MF-PMCS) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN 14414 : 2004 GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
PREN 13361 : DRAFT 2016 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
ISO 17467-1:2012 Plastics piping systems for the supply of gaseous fuels Unplasticized polyamide (PA-U) piping systems jointed by solvent cement Part 1: General
12/30263857 DC : 0 BS EN 4702-05 - AEROSPACE SERIES - QUICK RELEASE FASTENING SYSTEMS FOR NON-STRUCTURAL AND LINING APPLICATIONS - WASHER
BS EN 14963:2006 Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods
PREN 14716 : DRAFT 2014 STRETCHED CEILINGS - REQUIREMENTS AND TEST METHODS
ISO 8510-2:2006 Adhesives Peel test for a flexible-bonded-to-rigid test specimen assembly Part 2: 180 peel
DD CLC/TS 50131-2-7-3:2009 Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active)
BS EN ISO 8510-2:2010 Adhesives. Peel test for a flexible-bonded-to-rigid test specimen assembly 180 degree peel
17/30348286 DC : 0 BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS
BS EN 15860:2010 Plastics. Thermoplastic semi-finished products for machining. Requirements and test methods
INCITS/ISO/IEC 15757 : 1998 : R2005 INFORMATION TECHNOLOGY - DATA INTERCHANGE ON 8 MM WIDE MAGNETIC TAPE CARTRIDGE - HELICAL SCAN RECORDING - DA-2 FORMAT
02/106431 DC : DRAFT NOV 2002 PREN 14575 - GEOSYNTHETIC BARRIERS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION
ECMA 249 : 2ED 98 8MM WIDE MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - HELICAL SCAN RECORDING - DA-2 FORMAT
I.S. EN 13566-7:2007 PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
BS ISO 9523:2015 Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
ISO 21004:2006 Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply
05/30130524 DC : DRAFT MAR 2005 ISO 22621-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 1: GENERAL
I.S. EN ISO 21809-3:2016 PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016)
BS IEC/IEEE 62582-3:2012 Nuclear power plants. Instrumentation and control important to safety. Electrical equipment condition monitoring methods Elongation at break
06/30130317 DC : DRAFT JULY 2006 ISO 11833-1 - PLASTICS - UNPLASTICIZED POLY (VINYL CHLORIDE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
17/30335124 DC : 0 BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE
13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
CEI EN 60893-2 : 2005 INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST
BS ISO 11403-1 : AMD 10683 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - MECHANICAL PROPERTIES
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
UNE-EN 13492:2013 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment
UNE-EN ISO 6259-3:2015 Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)
BS ISO 13636:2012 Plastics. Film and sheeting. Non-oriented poly(ethylene terephthalate) (PET) sheets
ISO 5834-2:2011 Implants for surgery Ultra-high-molecular-weight polyethylene Part 2: Moulded forms
BS ISO 27127:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
15/30325373 DC : 0 BS EN 13592 - PLASTICS SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS
BS ISO 4587:2003 Adhesives. Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
13/30274532 DC : 0 BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD
08/30170332 DC : DRAFT JAN 2008 BS EN ISO 8986-2 - PLASTICS - POLYBUTENE-1 (PB-1) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 14632 : 1998 EXTRUDED SHEETS OF POLYETHYLENE (PE-HD) - REQUIREMENTS AND TEST METHODS
07/30169818 DC : 0 BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
13/30271610 DC : 0 BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS
BS EN 124-6:2015 Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)
16/30338111 DC : 0 BS EN 13491 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE AS A FLUID BARRIER IN THE CONSTRUCTION OF TUNNELS AND ASSOCIATED UNDERGROUND STRUCTURES
18/30369393 DC : 0 BS EN ISO 11296-7 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 7: LINING WITH SPIRALLY-WOUND PIPES
IEC 62642-2-71:2015 Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic)
ASTM D 5138 : 2016 : REDLINE Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
BS ISO 29221:2014 Plastics. Determination of mode I plane-strain crack-arrest toughness
I.S. EN 15344:2007 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLYETHYLENE (PE) RECYCLATES
15/30314236 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - REQUIREMENTS FOR SINGLE-USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANE OXYGENATION (ECMO)
BS EN ISO 6259-3:2015 Thermoplastics pipes. Determination of tensile properties Polyolefin pipes
BS ISO 12086-1 : 1995 AMD 10638 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS
07/30152076 DC : 0 BS ISO 25137-2 - PLASTICS - SULFONE PLASTICS (SP) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
04/19975667 DC : 0 BS ISO 15676 - CARDIOVASCULAR IMPLANTS AND ARTIFICIAL ORGANS - SINGLE - USE TUBING PACKS FOR CARDIOPULMONARY BYPASS AND EXTRACORPOREAL MEMBRANCE OXYGENATION
BS ISO 1268-8:2004 Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC
16/30338120 DC : 0 BS EN 15382 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
BS ISO 11515 : 2013 GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
UNE-EN 13493:2013 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites
PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
ISO 13781:2017 Implants for surgery — Homopolymers, copolymers and blends on poly(lactide) — In vitro degradation testing
BS ISO 13628-11:2007 Petroleum and natural gas industries. Design and operation of subsea production systems Flexible pipe systems for subsea and marine applications
CSA C22.2 No. 0.17 : 2000 : R2004 EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS
API 17B REDLINE : 2008 RECOMMENDED PRACTICE FOR FLEXIBLE PIPE
04/30091870 DC : DRAFT FEB 2004 BS EN ISO 12086-2 - PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
UNI EN 1013 : 2015 LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS
BS ISO 11833-1:1998 Plastics. Unplasticized poly(vinyl chloride) sheets. Tapes, dimensions and characteristics Sheets of thickness not less than 1 mm
BIS IS/IEC 61965 : 2003 MECHANICAL SAFETY OF CATHODE RAY TUBES
16/30338126 DC : 0 BS EN 13492 - GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF LIQUID WASTE DISPOSAL SITES, TRANSFER STATIONS OR SECONDARY CONTAINMENT
S.R. CLC/TS 50131-2-7-1:2009 ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC)
PREN ISO 11963 : DRAFT 2011 PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS
I.S. EN 14932:2018 PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES
UNE-EN ISO 21809-3:2016 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016)
CLC/TS 50131-2-7-3:2009 Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active)
I.S. EN ISO 16396-1:2015 PLASTICS - POLYAMIDE (PA) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM, MARKING OF PRODUCTS AND BASIS FOR SPECIFICATIONS (ISO 16396-1:2015)
DIN EN 15382:2016-08 (Draft) GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN TRANSPORTATION INFRASTRUCTURE
BS EN ISO 527-3:1996 Plastics. Determination of tensile properties Test conditions for films and sheets
UNE-EN ISO 11296-7:2014 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
17/30353406 DC : 0 BS EN 17096 - GEOSYNTHETICS - TEST METHOD FOR THE DETERMINATION OF THE STRAIN HARDENING MODULUS OF HDPE GEOSYNTHETIC BARRIERS
BS EN 13362:2018 Geosynthetic Barriers. Characteristics required for use in the construction of canals
BS EN ISO 10350-1:2017 Plastics. Acquisition and presentation of comparable single-point data Moulding materials
EN 13655:2018 Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture
EN 13362:2018 Geosynthetic Barriers - Characteristics required for use in the construction of canals
NF EN ISO 899-1 : 2017 PLASTICS - DETERMINATION OF CREEP BEHAVIOUR - PART 1: TENSILE CREEP
BS 2782-3.326E(1996) : 1996 AMD 13253 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - TEST CONDITIONS FOR FILMS AND SHEETS
PREN 17129 : DRAFT 2017 CONTINUOUS-FIBRE-REINFORCED PLASTIC COMPOSITES - PULTRUDED UNIDIRECTIONAL RODS - DETERMINATION OF TENSILE PROPERTIES IN PARALLEL TO THE FIBRE DIRECTION
ASTM D 5937 : 1996 Standard Test Method for Determination of Tensile Properties and Test Conditions for Moulding and Extrusion Plastics (Withdrawn 1998)
EN ISO 12215-1:2000 Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000)
ONORM EN ISO 11403-3 : 2015 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
BS EN 13766:2010 Thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
I.S. CEN TS 15354:2006 PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION
EN 15860:2010 Plastics - Thermoplastic semi-finished products for machining - Requirements and test methods
S.R. CEN TS 15534-1:2007 WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS
ASTM D 5592 : 1994 : R2002 : EDT 1 Standard Guide for Material Properties Needed in Engineering Design Using Plastics
IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
I.S. EN 15860:2010 PLASTICS - THERMOPLASTIC SEMI-FINISHED PRODUCTS FOR MACHINING - REQUIREMENTS AND TEST METHODS
ISO 6691:2000 Thermoplastic polymers for plain bearings Classification and designation
ISO 15439-1:2007 Plastics piping systems for the supply of gaseous fuels for maximum operating pressure up to and including 0,4 MPa (4 bar) Polyamide (PA) Part 1: General
S.R. CEN ISO TS 24817:2011 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION
IEC TS 62600-2:2016 Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems
EN ISO 13628-11:2008/AC:2009 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 11: FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS
DIN EN 14414 E : 2004 GEOSYNTHETICS - SCREENING TEST METHOD FOR DETERMINING CHEMICAL RESISTANCE FOR LANDFILL APPLICATIONS
DIN EN 14575 E : 2005 GEOSYNTHETIC BARRIERS - SCREENING TEST METHOD FOR DETERMINING THE RESISTANCE TO OXIDATION
DIN EN 1504-5:2013-06 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 5: CONCRETE INJECTION
ISO 11248:1993 Plastics — Thermosetting moulding materials — Evaluation of short-term performance at elevated temperatures
BS EN 13199-3:2000 Packaging. Small load carrier systems Bond Stackable System (BSS)
ISO 22007-4:2017 Plastics — Determination of thermal conductivity and thermal diffusivity — Part 4: Laser flash method
ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
UNE-EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
07/30091745 DC : 0 BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS
ISO 15252-2:1999 Plastics Epoxy powder moulding compounds (EP-PMCs) Part 2: Preparation of test specimens and determination of properties
ISO 16103:2005 Packaging — Transport packaging for dangerous goods — Recycled plastics material
BS EN ISO 1163-2:2000 Plastics. Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials Preparation of test specimens and determination of properties
BS EN ISO 527-2:1996 Plastics. Determination of tensile properties Test conditions for moulding and extrusion plastics
BS EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
BS EN ISO 11963:2012 Plastics. Polycarbonate sheets. Types, dimensions and characteristics
ISO 14663-2:1999 Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN ISO 14631:1999 Extruded sheets of impact-modified polystyrene (PS-I). Requirements and test methods
ISO 14527-2:1999 Plastics Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) Part 2: Preparation of test specimens and determination of properties
UNE-EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
BS EN 14867:2005 Packaging. Plastic freezer bags. Specifications and test methods
ISO 15526-2:2000 Plastics Polyketone (PK) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties
BS EN 15344:2007 Plastics. Recycled plastics. Characterization of polyethylene (PE) recyclates
BS EN 12814-7:2002 Testing of welded joints of thermoplastics semi-finished products Tensile test with waisted test specimens
BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
03/314451 DC : DRAFT SEP 2003 IEC 62392 TR ED.1 - SUITABILITY OF TYPICAL ELECTRICAL INSULATING MATERIAL FOR POLYMER RECYCLING
BS EN ISO 14530-2:2000 Plastics. Unsaturated-polyester powder moulding compounds (UP-PMCs) Preparation of test specimens and determination of properties
BS EN ISO 11403-3:2014 Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties
EN ISO 527-5:2009 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
EN 13473-2:2001 Reinforcement - Specifications for multi-axial multi-ply fabrics - Part 2: Methods of test and general requirements
I.S. EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
DIN EN 13362:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
DIN EN 14867:2005-09 Packaging - Plastic freezer bags - Specifications and test methods; German version EN 14867:2005
DIN EN 13493:2013-11 GEOSYNTHETIC BARRIERS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF SOLID WASTE STORAGE AND DISPOSAL SITES
DIN EN ISO 14663-2:2006-06 PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN 1013-5:2000 Light transmitting profiled plastic sheeting for single skin roofing - Part 5: Specific requirements, test methods and performance of polymethylmethacrylate (PMMA) sheets
DIN EN ISO 12086-2:2006-05 PLASTICS - FLUOROPOLYMER DISPERSIONS AND MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
CEN ISO/TS 24817:2011 Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006)
DIN ISO 5912:2004-05 CAMPING TENTS
EN ISO 527-4:1997 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 4: TEST CONDITIONS FOR ISOTROPIC AND ORTHOTROPIC FIBRE-REINFORCED PLASTIC COMPOSITES
EN 131-2:2010+A2:2017 Ladders - Part 2: Requirements, testing, marking
UNI EN ISO 527-5 : 2009 PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES
EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN EN 12814-7:2003-01 TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 7: TENSILE TEST WITH WAISTED TEST SPECIMENS
DIN EN ISO 11403-3:2002-02 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014)
DIN EN ISO 527-5:2010-01 Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009)
DIN EN 14575:2005-07 Geosynthetic barriers - Screening test method for determining the resistance to oxidation; German version EN 14575:2005
DIN EN ISO 527-2:2012-06 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
DIN EN 14415:2004-08 Geosynthetic barriers - Test method for determining the resistance to leaching
DIN EN 14414:2004-08 Geosynthetics - Screening test method for determining chemical resistance for landfill applications
DIN EN 483:2000-06 GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW
DIN EN ISO 11403-1:2003-09 PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 1: MECHANICAL PROPERTIES (ISO 11403-1:2014)
DIN EN ISO 22007-4:2012-04 PLASTICS - DETERMINATION OF THERMAL CONDUCTIVITY AND THERMAL DIFFUSIVITY - PART 4: LASER FLASH METHOD (ISO 22007-4:2017)
CEN/TS 15534-2:2007 Wood-plastics composites (WPC) - Part 2: Characterisation of WPC materials
EN 13483:2013 Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
CEN/TS 15354:2006 Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation
EN 13566-7:2007 Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes
DIN EN 14628:2006-01 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
BS 7008-1(1994) : AMD 8821 ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA

ISO 23529:2016 Rubber General procedures for preparing and conditioning test pieces for physical test methods
ISO 1926:2009 Rigid cellular plastics Determination of tensile properties
ISO 9513:2012 Metallic materials — Calibration of extensometer systems used in uniaxial testing
ISO 2602:1980 Statistical interpretation of test results Estimation of the mean Confidence interval
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
ISO 294-1:2017 Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
ISO 20753:2008 Plastics Test specimens
ISO 16012:2015 Plastics Determination of linear dimensions of test specimens
ASTM D 638 : 2014 : REDLINE Standard Test Method for Tensile Properties of Plastics

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.