• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 5459:2011

Current
Current

The latest, up-to-date edition.

Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

French, English, Russian

Published date

10-08-2011

Preview

ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in understanding the concepts involved.

ISO 5459:2011 defines the specification operator (see ISO 17450-2) used to establish a datum or datum system. The verification operator (see ISO 17450-2) can take different forms (physically or mathematically) and is not the subject of ISO 5459:2011.

The detailed rules for maximum and least material requirements for datums are given in ISO 2692.

Committee
ISO/TC 213
DevelopmentNote
DRAFT ISO/DIS 5459 has been withdrawn by the publisher. (03/2018)
DocumentType
Standard
Pages
82
ProductNote
THIS STANDARD ALSO REFERS TO ISO 1101:2004/Amd 1
PublisherName
International Organization for Standardization
Status
Current
Supersedes

ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
DIN EN ISO 10579:2013-11 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
DIN ISO 8062:1998-08 CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES
BS IEC 60191-1:2007 Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of discrete devices
EN IEC 60191-1:2018 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
14/30272936 DC : 0 BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES
ISO 17450-4:2017 Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations
DIN ISO 2692:1990-05 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE
I.S. EN ISO 10579:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
BS EN ISO 17450-3:2016 Geometrical product specifications (GPS). General concepts Toleranced features
17/30341082 DC : 0 BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
BS 6615:1985 Specification for dimensional tolerances for metal and metal alloy castings
BS ISO 10135:1994 Technical drawings. Simplified representation of moulded, cast and forged parts
12/30262686 DC : 0 BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR)
DIN ISO 10110-6:2016-06 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015)
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings
BS ISO 1101:1983 Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings
I.S. EN ISO 14638:2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
I.S. EN ISO 10135:2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
I.S. EN ISO 14405-2:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
I.S. EN ISO 17450-3:2016 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
ISO 7465:2007 Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type
UNE-EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
ISO 10579:2010 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts
BS EN ISO 2692:2014 Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN 1559-1:2011 Founding. Technical conditions of delivery General
EN ISO 14638:2015 Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015)
DIN EN ISO 1101:2017-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
ONORM EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
17/30348146 DC : 0 BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS EN ISO 10135:2009 Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD)
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
DIN ISO 2768-2:1991-04 General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989
DIN ISO 128-22:1999-11 Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999)
DIN EN ISO 5458:2016-08 (Draft) GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
12/30230676 DC : 0 BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
ISO 10303-238:2007 Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers
BS ISO 8062-4:2017 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system
DIN EN ISO 8015:2011-09 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
BS ISO 1099:2017 Metallic materials. Fatigue testing. Axial force-controlled method
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules
CEI EN 61754-1 : 2014 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
15/30295117 DC : 0 BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING
BS EN 61169-1:2013 Radio-frequency connectors Generic specification. General requirements and measuring methods
EN ISO 7083:1994 Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983)
BS ISO 23788:2012 Metallic materials. Verification of the alignment of fatigue testing machines
UNI EN ISO 8062-3 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
DIN ISO 10110-19:2016-04 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
DIN CEN ISO/TS 8062-2; DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
I.S. EN ISO 5459:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS
10/30234803 DC : 0 BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
14/30262683 DC : 0 BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM
05/30127444 DC : DRAFT JAN 2005 ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS
UNI EN ISO 10135 : 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD)
I.S. EN ISO 7083:1995 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
BS ISO 4156-3:2005 Straight cylindrical involute splines. Metric module, side fit Inspection
EN ISO 2692:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
EN ISO 5458 : 1998 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998)
UNI ISO 10579 : 1995 TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS
NF ISO 128-1 : 2003 TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes
I.S. EN 60191-1:2007 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method
ISO 10110-6:2015 Optics and photonics Preparation of drawings for optical elements and systems Part 6: Centring tolerances
ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
UNI ISO 7465 : 2010 PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE
DIN EN ISO 14405-2:2012-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011)
UNI EN ISO 14978 : 2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO/TR 18569:2004 Safety of machinery Guidelines for the understanding and use of safety of machinery standards
ISO 10303-223:2008 Industrial automation systems and integration — Product data representation and exchange — Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts
DIN EN ISO 10360-6:2009-01 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
DIN EN 1559-1:2011-05 Founding - Technical conditions of delivery - Part 1: General
UNE-EN ISO 2692:2015 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
ISO 8062-3:2007 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
I.S. EN ISO 14660-1:2000 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
DIN ISO 16792:2008-12 TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES
I.S. EN 22768-2:1994 GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
I.S. EN ISO 1101:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017)
I.S. EN 1559-1:2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
I.S. EN ISO 2692:2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014)
EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
I.S. EN ISO 1660:2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
BS 308-3:1990 Engineering drawing practice Recommendations for geometrical tolerancing
BS 308-1:1984 Engineering drawing practice Recommendations for general principles
BS 308-2:1985 Engineering drawing practice Recommendations for dimensioning and tolerancing of size
BS CECC 22000:1993 Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III)
BS 6615:1996 Specification for dimensional tolerances for metal and metal alloy castings
17/30348149 DC : 0 BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
12/30259955 DC : 0 BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
ONORM EN ISO 14978 : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
CEI EN 60191-1 : 2008 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
DIN EN ISO 8062-3 E : 2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
12/30268851 DC BS EN 9300-120. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. CAD 3D explicit geometry with product and manufacturing information
BS ISO 10110-19:2015 Optics and photonics. Preparation of drawings for optical elements and systems General description of surfaces and components
BS EN ISO 10579:2013 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
13/30272252 DC : 0 BS ISO 10110-6 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES
BS ISO 128-22:1999 Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines
BS ISO 8788:2000 Aerospace. Nuts, metric. Tolerances of form and position
09/30200834 DC : 0 BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
DIN EN ISO 8062-3:2008-09 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
DIN EN ISO 14638 E : 2015 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
UNE-EN ISO 17450-3:2017 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
BS ISO 10303-47:1997 Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances
DIN EN ISO 1660 E : 2017 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017)
BS EN ISO 5458:1999 Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing
S.R. CEN ISO/TS 8062-2:2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
ISO 8062-4:2017 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system
ISO 4156-3:2005 Straight cylindrical involute splines Metric module, side fit Part 3: Inspection
UNE-EN ISO 8015:2012 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
I.S. EN ISO 14978:2006 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
ISO 10303-224:2006 Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features
IEC 60191-1:2018 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
ISO 14405-2:2011 Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes
UNI EN ISO 10579 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
ISO/TS 17863:2013 Geometrical product specification (GPS) Tolerancing of moveable assemblies
ISO/TR 5460:1985 Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines
ISO 10303-219:2007 Industrial automation systems and integration — Product data representation and exchange — Part 219: Application protocol: Dimensional inspection information exchange
ISO 8788:2000 Aerospace Nuts, metric Tolerances of form and position
ISO 5458:1998 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing
DIN EN ISO 2692:2015-12 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014)
DIN EN ISO 14978:2006-09 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
BS EN 22768-2:1993 General tolerances Geometrical tolerances for features without individual tolerance indications
ISO 10135:2007 Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
IEC 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance
IEC 61169-1:2013 Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods
ISO 10360-6:2001 Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
EN ISO 14978:2006/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT
EN ISO 14660-1:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS
UNI EN ISO 10360-6 : 2005 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES
UNI EN 1559-1 : 2011 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
DIN SPEC 91184 E : 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
BS 308-2.3(1996) : 1996 TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING OF PROFILES
99/702254 DC : DRAFT JAN 1999 ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE
ISO 10303-519:2000 Industrial automation systems and integration — Product data representation and exchange — Part 519: Application interpreted construct: Geometric tolerances
BS ISO 10110-6:2015 Optics and photonics. Preparation of drawings for optical elements and systems Centring tolerances
13/30284676 DC : 0 BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING
EN ISO 17450-4:2018 Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017)
DIN EN ISO 10579 E : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011)
DIN EN ISO 14638:2015-12 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015)
UNI CEN ISO/TS 8062-2 : 2013 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES
BS EN ISO 8015:2011 Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules
DIN ISO 2768-1:1991-06 GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
05/30107533 DC : DRAFT JUL 2005 ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES
DIN ISO 1101:1985-03 TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS
BS EN ISO 14638:2015 Geometrical product specifications (GPS). Matrix model
BS EN 61754-1:2013 Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance
BS 308-3.6(1995) : 1995 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
BS ISO 492:2014 Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values
08/30184522 DC : DRAFT JUNE 2008 BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS
BS ISO 16792:2006 Technical product documentation. Digital product definition data practices
I.S. EN ISO 17450-4:2018 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017)
17/30346164 DC : 0 BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNE-EN ISO 10579:2015 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
I.S. EN IEC 60191-1:2018 MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES
NF ISO 4156-3 : 2006 STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION
I.S. EN ISO 8062-3:2007 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
PREN ISO 2692 : DRAFT 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012)
ISO/TR 10064-3:1996 Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
I.S. EN 61169-1:2013 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS
EN 61169-1:2013/AC:2016-02 RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013)
ISO 17450-3:2016 Geometrical product specifications (GPS) General concepts Part 3: Toleranced features
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
ISO 128-1:2003 Technical drawings General principles of presentation Part 1: Introduction and index
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
BS EN ISO 10360-6:2001 Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features
ISO 2768-2:1989 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
ISO 14638:2015 Geometrical product specifications (GPS) Matrix model
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
BS EN ISO 14660-1:2000 Geometrical product specifications (GPS). Geometrical features General terms and definitions
BS EN ISO 1660:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
ISO 14660-1:1999 Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions
ISO 7083:1983 Technical drawings Symbols for geometrical tolerancing Proportions and dimensions
EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017)
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
EN ISO 8015:2011 Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011)
EN 1559-1:2011 Founding - Technical conditions of delivery - Part 1: General
EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011)
EN ISO 17450-3:2016 Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016)
EN ISO 8062-3 : 2007 COR 2009 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS
EN ISO 7490 : 2000 Dental gypsum-bonded casting investments (ISO 7490:2000)
EN ISO 10360-6:2001/AC:2008 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES (ISO 10360-6:2001/Cor 1:2007)
EN ISO 10135:2009 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
DIN EN ISO 10135:2010-02 Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007)
16/30341970 DC : 0 BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES
BS ISO 2692:1988 Technical drawings. Geometrical tolerancing. Maximum material principle
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii
DIN ISO 10110-19 E : 2016 OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015)
BS ISO 10579 : 2010 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS
BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
DIN ISO 5458:1988-07 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
UNI EN ISO 8015 : 2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
ISO 10110-19:2015 Optics and photonics Preparation of drawings for optical elements and systems Part 19: General description of surfaces and components
04/30125936 DC : DRAFT NOV 2004 ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS
BS ISO TR 10064-3:1996 Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes
13/30253349 DC : 0 BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES
BIS IS 2102-2 : 1993(R2014) GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 23788:2012 Metallic materials — Verification of the alignment of fatigue testing machines
DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013)
DIN 406-10:1992-12 TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES
I.S. EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
UNI EN ISO 14405-2 : 2012 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES
PREN 1559-1 : DRAFT 2009 FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
ISO 16792:2015 Technical product documentation Digital product definition data practices
BS EN ISO 14978:2006 Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment
I.S. EN ISO 8015:2011 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES
ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
ISO 14978:2006 Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
I.S. EN 61754-1:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE
CEN ISO/TS 8062-2 : 2013 COR 2014 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01)
ISO 1101:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
PD ISO/TR 18569:2004 Safety of machinery. Guidelines for the understanding and use of safety of machinery standards.
BS EN ISO 7083:1995 Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions
ISO/TS 8062-2:2013 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules
EN 60191-1:2007 Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices
EN 61754-1:2013 Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance

ISO/TR 14638:1995 Geometrical product specification (GPS) Masterplan
ISO 8015:2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules
ISO 1101:2004 Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
ISO 2692:2014 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
ISO 128-24:2014 Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings
ISO 3098-5:1997 Technical product documentation Lettering Part 5: CAD lettering of the Latin alphabet, numerals and marks
ISO 7083:1983 TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS
ISO 14253-1:2017 Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications
ISO 81714-1:2010 Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules
ISO 2768-2:1989 GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
ISO 3098-0:1997 Technical product documentation Lettering Part 0: General requirements
ISO 14660-1:1999 Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions

View more information
£199.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.