ISO 6507-1:2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Metallic materials Vickers hardness test Part 1: Test method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
29-11-2018
Language(s)
English, French
Published date
08-12-2005
ISO 6507-1:2005 specifies the Vickers hardness test method for the three different ranges of test force for metallic materials.
The Vickers hardness test is specified in ISO 6507-1:2005 for lengths of indentation diagonals between 0,020 mm and 1,400 mm.
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| EN ISO 6507-1:2005 | Identical |
| IS 1501 : Part 1 : 2013(R2018) | Identical |
| DIN EN ISO 6507-1:2016-08 (Draft) | Identical |
| BS EN ISO 6507-1:2005 | Identical |
| NFA 03 154 : 1983 | Similar to |
| SANS 6507-1 : 3ED 2006(R2013) | Identical |
| UNE-EN ISO 6507-1:2006 | Identical |
| NBN E 82 001 : 1972 | Identical |
| GOST R ISO 6507-1 : 2007 | Identical |
| EN ISO 6507-1:2018 | Identical |
| PN EN ISO 6507-1 : 2007 | Identical |
| ONORM EN ISO 6507-1 : 2006 | Identical |
| I.S. EN ISO 6507-1:2018 | Identical |
| UNI EN ISO 6507-1 : 2006 | Identical |
| DIN 50133:1985-02 | Similar to |
| NF EN ISO 6507-1 : 2018 | Identical |
| NS 10110 : 1985 | Similar to |
| NFA 03 253 : 72 FD | Similar to |
| UNI 1955 : 1990 | Similar to |
| UNE 7423-1:1984 | Identical |
| DIN EN ISO 6507-1:2006-03 | Identical |
| DS EN ISO 6507-1 : 2006 | Identical |
| I.S. EN 4700-007:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| NF EN ISO 9015-1 : 2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| 03/108761 DC : DRAFT MAY 2003 | EN ISO 10477 - DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| DIN EN ISO 6506-2:2016-04 (Draft) | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 15156-3:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| BS EN 4700-001:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Plate, sheet and strip |
| BS EN 4677-001:2012 | Aerospace series. Welded and brazed assemblies for aerospace construction. Joints of metallic materials by electron beam welding Quality of welded assemblies |
| BS ISO 8535-1:2016 | Diesel engines. Steel tubes for high-pressure fuel injection pipes Requirements for seamless cold-drawn single-wall tubes |
| 11/30216118 DC : 0 | BS EN ISO 1797-3 - DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
| UNE-EN ISO 12670:2016 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| DIN EN ISO 21672-1:2012-07 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| BS 6516-1:1984 | Solderless connections Solderless wrapped connections. General requirements, test methods and practical guidance. |
| ISO 9652-4:2000 | Masonry Part 4: Test methods |
| 04/30098257 DC : DRAFT MAY 2004 | EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| UNI EN 4677-001 : 2013 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| 14/30261090 DC : 0 | BS EN ISO 17937 - DENTISTRY - OSTEOTOME FOR BONE COMPACTION AND SINUS FLOOR ELEVATION |
| BS 2782-7:Method 722B:1996 | Methods of testing plastics. Rheological properties Determination of the fluidity of plastics using capillary and slit-die rheometers |
| DIN ISO 22826:2008-08 | Destructive tests on welds in metallic materials - Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) (ISO 22826:2005) |
| BS ISO 16877:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade TH |
| UNE-EN ISO 5182:2017 | Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) |
| 17/30357660 DC : DRAFT AUG 2017 | BS ISO 4960 - STEEL STRIP, COLD-REDUCED WITH A MASS FRACTION OF CARBON OVER 0,25% |
| API 11D3 :2008 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| UNI EN 14587-3 : 2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| 17/30346738 DC : 0 | BS EN 10225-2 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 2: SECTIONS |
| UNI EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| DIN EN ISO 9015-2:2016-10 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| DIN EN ISO 1797:2016-05 (Draft) | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| 13/30290101 DC : 0 | BS EN 4700-2 - AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN ISO 16744:2004 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| OIML G 4 : 1984 | HARDNESS TEST BLOCKS AND INDENTERS |
| DIN ISO 13411:1996-12 (Draft) | AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| I.S. EN 14587-3:2012 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 3: WELDING IN ASSOCIATION WITH CROSSING CONSTRUCTION |
| BS 7814:1995 | Specification for bolts and screws incorporating either underhead locking or anti-rotation features |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| 16/30327067 DC : 0 | BS EN ISO 3887 - STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| BS EN ISO 14998:2013 | Petroleum and natural gas industries. Downhole equipment. Completion accessories |
| 00/709299 DC : DRAFT JUNE 2000 | ISO 8535-2:1993 (REVISION) - COMPRESSION IGNITION ENGINES - STEEL TUBES FOR HIGH PRESSURE FUEL INJECTION PIPES - PART 2: REQUIREMENTS FOR COMPOSITE TUBES |
| API 5DP CHINESE : 2009 | SPECIFICATION FOR DRILL PIPE |
| BS EN ISO 21672-1:2012 | Dentistry. Periodontal probes General requirements |
| BS ISO 7689:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1100 MPa. Procurement specification |
| BS 3900-E12:1986 | Methods of test for paints Indentation test (spherical or pyramidal) |
| ISO 6208:1992 | Nickel and nickel alloy plate, sheet and strip |
| UNI EN 4700-006 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| DIN 17751:2002-09 | TUBES OF WROUGHT NICKEL AND NICKEL ALLOYS - PROPERTIES |
| 01/714323 DC : DRAFT OCT 2001 | EN ISO 15156-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW ALLOY STEELS |
| BS ISO 11443:2014 | Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers |
| NF EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| XP PREN 3299 : 1997 XP | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| BS ISO 17804:2005 | Founding. Ausferritic spheroidal graphite ausferrite cast iron. Classification |
| BIS IS 1500-2 : 2013 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 08/30190326 DC : DRAFT DEC 2008 | BS EN 10225 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| 17/30315891 DC : 0 | BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
| 16/30297742 DC : DRAFT JUNE 2016 | BS EN ISO 19490 - DENTISTRY - SINUS MEMBRANE ELEVATOR |
| 10/30197302 DC : 0 | BS ISO 22068 - SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN 6773:2001-04 | HEAT TREATMENT OF FERROUS METALS - HEAT TREATED PARTS, PRESENTATION AND INDICATIONS ON DRAWINGS |
| 16/30319126 DC : 0 | BS ISO 20267 - THERMAL SPRAYING - DETERMINATION OF INTERFACIAL TOUGHNESS OF CERAMIC COATINGS BY INDENTATION |
| PD ISO/TR 10809-1:2009 | Cast irons Materials and properties for design |
| 04/30074927 DC : DRAFT JUN 2004 | EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| 02/711556 DC : 0 | LINKS FOR USE WITH STEEL CHAINS OF GRADE 8 |
| BS ISO 8535-2:2003 | Compression ignition engines. Steel tubes for high pressure fuel injection pipes Requirements for composite tubes |
| UNE-EN ISO 19490:2018 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| 12/30258463 DC : 0 | BS EN 16451 - RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| BS EN 4700-005:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Forging stock |
| BS EN ISO 12670:2015 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| 06/30151815 DC : 0 | BS ISO 898-1 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS |
| DIN EN 15551 E : 2011 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| 16/30302541 DC : 0 | BS EN ISO 19715 - DENTISTRY - FILLING INSTRUMENTS WITH CONTRA SET |
| 15/30314608 DC : 0 | BS EN ISO 7153-1 - SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS |
| 15/30293878 DC : 0 | BS ISO 19207 - THERMAL SPRAYING - CLASSIFICATION METHOD OF ADHESIVE STRENGTH BY INDENTATION |
| 12/30258615 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| 13/30261096 DC : 0 | BS EN ISO 17945 - MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS |
| 17/30361645 DC : DRAFT SEP 2017 | BS EN ISO 11961 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| 06/30143946 DC : 0 | EN 485-1 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN 15594:2009 | Railway applications. Track. Restoration of rails by electric arc welding |
| PREN 10225-4 : DRAFT 2017 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| API 16A : 2017 : INC : ERR 1+ERR2+ADD1 : 2018 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| 04/30095196 DC : DRAFT MAY 2004 | EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| ISO 15590-2:2003 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
| 05/30128668 DC : DRAFT FEB 2005 | ISO 7689 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1100 MPA - PROCUREMENT |
| API 11D3 : 2008 : R2015 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - SURFACE-DRIVE SYSTEMS |
| UNE-EN 14587-3:2013 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| BS 6828-1:1987 | Dental rotary instruments Specification for shanks |
| 04/30116297 DC : DRAFT JUL 2004 | ISO 20826 - ROAD VEHICLES - AUTOMOTIVE LPG COMPONENTS - CONTAINERS |
| UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| ISO 3887:2017 | Steels — Determination of the depth of decarburization |
| I.S. EN ISO 17945:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| I.S. EN 16602-70-46:2014 | SPACE PRODUCT ASSURANCE - REQUIREMENTS FOR MANUFACTURING AND PROCUREMENT OF THREADED FASTENERS |
| PREN 2646 : 200P3 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN STEEL, CADMIUM PLATED |
| DIN EN ISO 14917:2015-09 (Draft) | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| PREN 10208-3 : DRAFT 1997 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| PREN 3299 : 200P1 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| ISO 20267:2017 | Thermal spraying — Determination of interfacial toughness of ceramic coatings by indentation |
| PREN 3908 : 200P2 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| ISO 15787:2016 | Technical product documentation Heat-treated ferrous parts Presentation and indications |
| I.S. EN 16771:2016 | RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
| ONORM EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| ISO/TR 15461:1997 | Steel forgings Testing frequency, sampling conditions and test methods for mechanical tests |
| I.S. EN ISO 21672-1:2012 | DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS (ISO 21672-1:2012) |
| I.S. EN 16725:2016 | RAILWAY APPLICATIONS - TRACK - RESTORATION AND REPAIR OF MANGANESE CROSSINGS |
| I.S. EN ISO 1797:2017 | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| I.S. EN ISO 18556:2016 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| PREN 1015-11 : DRAFT 2017 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| ISO 10477:2004 | Dentistry Polymer-based crown and bridge materials |
| UNE-EN ISO 16635-2:2015 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| ISO 5857:2008 | Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa Procurement specification |
| 18/30365854 DC : 0 | BS EN 1337-6 - STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| ISO 8642:2008 | Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Test methods |
| I.S. EN ISO 1797-3:2013 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| UNI EN 14399-9 : 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| ASTM F 3213 : 2017 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion |
| UNE-EN ISO 16859-2:2016 | Metallic materials - Leeb hardness test - Part 2: Verification and calibration of the testing devices (ISO 16859-2:2015) |
| BIS IS 15311-1 : 2003 AMD 1 | DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| EN 10132-1:2000 | Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General |
| ISO 22826:2005 | Destructive tests on welds in metallic materials Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| ISO 22394:2010 | Hardmetals Knoop hardness test |
| UNE-EN ISO 6506-2:2015 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| I.S. EN ISO 16859-2:2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| NF EN 3299 : A2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| EN ISO 80079-36:2016 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| I.S. EN 12390-4:2000 | TESTING HARDENED CONCRETE - PART 4: COMPRESSIVE STRENGTH - SPECIFICATION FOR TESTING MACHINES |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN ISO 15156-2:2015-12 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN ISO 5470-1:2015-04 (Draft) | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
| DIN EN ISO 10673:2009-10 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| DIN EN ISO 10669:1999-11 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999); German version EN ISO 10669:1999 |
| DIN EN 586-2:1994-11 | ALUMINIUM AND ALUMINIUM ALLOYS - FORGINGS - PART 2: MECHANICAL PROPERTIES AND ADDITIONAL PROPERTY REQUIREMENTS |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| UNE-EN ISO 8752:2010 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| BS EN ISO 13628-2:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Unbonded flexible pipe systems for subsea and marine applications |
| BS EN ISO 15098-1:2001 | Dental tweezers General requirements |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| BS EN ISO 14310:2008 | Petroleum and natural gas industries. Downhole equipment. Packers and bridge plugs |
| BS EN ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN 1301-1:2008 | Aluminium and aluminium alloys. Drawn wire Technical conditions for inspection and delivery |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| BS EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres Basic method and requirements |
| BS EN ISO 7089:2000 | Plain washers. Normal series. Product grade A |
| BS EN ISO 10673:2009 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A |
| BS EN 10328:2005 | Iron and steel. Determination of the conventional depth and hardening after surface heating |
| BS EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| BS EN 586-2:1994 | Aluminium and aluminium alloys. Forgings Mechanical properties and additional property requirements |
| BS EN ISO 10669:1999 | Plain washers for tapping screw and washer assemblies. Normal and large series. Product grade A |
| BS EN 13348:2016 | Copper and copper alloys. Seamless, round copper tubes for medical gases or vacuum |
| BS EN ISO 7153-1:2016 | Surgical instruments. Materials Metals |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| BS EN ISO 7091:2000 | Plain washers. Normal series. Product grade C |
| UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BS EN 14730-1:2017 | Railway applications. Track. Aluminothermic welding of rails Approval of welding processes |
| BS EN 24498-1:1993 | Sintered metal materials, exluding hardmetals. Determination of apparent hardness. Materials of essentially uniform section hardness |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| ISO 7085:1999 | Mechanical and performance requirements of case hardened and tempered metric thread rolling screws |
| BS EN ISO 8750:2007 | Spring-type straight pins. Coiled, standard duty |
| BS EN ISO 8752:2009 | Spring-type straight pins. Slotted, heavy duty |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
| DIN EN 20898-2:1994-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH COARSE PITCH THREAD AND SPECIFIED PROOF LOAD VALUES |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| I.S. EN ISO 8748:2007 | SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
| EN 1043-1:1995 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints |
| EN 50109-2-3:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-3: Particular requirements for contacts of electrical connectors |
| EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| EN 12805:2002 | Automotive LPG components - Containers |
| EN 1057:2006+A1:2010 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| EN 10088-4:2009 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| EN 10109-2 : 1994 | METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 15732:2005-09 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| DIN EN 657:2005-06 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| EN 10003-2 : 1994 | METALLIC MATERIALS - BRINELL HARDNESS TEST - VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| EN 12797:2000/A1:2003 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| DIN ISO 4498:2005-11 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| EN 1337-2:2004 | Structural bearings - Part 2: Sliding elements |
| EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| DIN EN ISO 8750:2007-07 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| DIN EN ISO 5470-1:2017-04 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| EN 10109-3 : 1994 | METALLIC MATERIALS - HARDNESS OF TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN EN 15551:2011-01 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| DIN EN ISO 15087-1:2002-03 | DENTAL ELEVATORS - PART 1: GENERAL REQUIREMENTS |
| ONORM EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| ONORM EN ISO 2702 : 2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| ISO 13411:1997 | Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| UNI EN ISO 16635-2 : 2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS |
| BS EN ISO 16635-2:2014 | Dentistry. Dental rubber dam instruments Clamp forceps |
| 10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| DIN 13906-1:1990-07 | DENTISTRY - DENTAL CASTING GOLD ALLOYS |
| DIN EN 60352-1:1998-04 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 07/30139530 DC : 0 | BS ISO 8752 - SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| BS EN 16273:2014 | Railway applications. Track. Forged rail transitions |
| DIN EN ISO 19715 E : 2017 | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| 05/30136295 DC : DRAFT JUL 2005 | ISO 4875-2 - METAL-CUTTING BAND SAW BLADES - PART 2: CHARACTERISTICS AND DIMENSIONS |
| 14/30268499 DC : 0 | BS ISO 16872 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE VH |
| DIN EN ISO 16635-1 E : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| API SPEC 11D1 : 2015 | PACKERS AND BRIDGE PLUGS |
| 16/30290358 DC : 0 | BS EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| DIN EN ISO 1133-1:2012-03 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| API 64 : 2017-08 | DIVERTER EQUIPMENT SYSTEMS |
| BS EN 4700-006:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Pre-production and production forgings |
| 14/30285793 DC : 0 | BS EN 16771 - RAILWAY APPLICATIONS - INFRASTRUCTURE - ALUMINOTHERMIC WELDING OF GROOVED RAILS |
| I.S. EN 657:2005 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| ISO 17918:2015 | Corrosion of metals and alloys Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| BS EN ISO 17509:2016 | Dentistry. Torque transmitter for handpieces |
| DIN EN ISO 22068 E : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| DIN EN 16273:2015-03 | Railway applications - Track - Forged rail transitions |
| API 16A CHINESE : 2004 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| BS ISO 7492 : 1997 AMD 10134 | DENTAL EXPLORERS |
| I.S. EN 1043-1:1996 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| PREN 14587-1 : DRAFT 2017 | RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| BS ISO 22394:2010 | Hardmetals. Knoop hardness test |
| ISO 13533:2001 | Petroleum and natural gas industries — Drilling and production equipment — Drill-through equipment |
| 15/30278527 DC : 0 | BS EN ISO 18559 - DENTISTRY - EXTRAORAL SPATULAS FOR MIXING DENTAL CEMENTS |
| DIN EN 16451:2015-09 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| I.S. EN ISO 14917:2017 | THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION (ISO 14917:2017) |
| BS EN ISO 19490:2017 | Dentistry. Sinus membrane elevator |
| BS ISO 15341:2014 | Graphic technology. Method for radius determination of printing cylinders |
| ISO 2853:1993 | Stainless steel threaded couplings for the food industry |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| BS ISO 22068 : 2012 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| DIN EN 14587-3:2013-01 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| DIN EN ISO 9873:2016-03 (Draft) | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| 17/30352980 DC : 0 | BS EN ISO 14918 - THERMAL SPRAYING - QUALIFICATION TESTING OF THERMAL SPRAYERS |
| BS EN ISO 19715:2017 | Dentistry. Filling instrument with contra angle |
| BS ISO 19207:2016 | Thermal spraying. Classification method of adhesive strength by indentation |
| DIN EN 15594:2009-08 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 03/105579 DC : DRAFT APR 2003 | ISO 17744 - PLASTICS - DETERMINATION OF SPECIFIC VOLUME AS A FUNCTION OF TEMPERATURE AND PRESSURE (PVT DIAGRAM) - PISTON APPARATUS METHOD |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| ISO 16872:2015 | Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade VH |
| ISO 12900:2015 | Hard coal Determination of abrasiveness |
| BS EN ISO 16859-2:2015 | Metallic materials. Leeb hardness test Verification and calibration of the testing devices |
| BS A 343:1999 | Nuts, plain or slotted (castellated). Test methods |
| BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
| EN 4700-002:2016 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 002: Bar and section |
| 07/30107797 DC : 0 | BS EN 14399-9 - HIGH STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - BOLT AND NUT ASSEMBLIES WITH DIRECT TENSION INDICATORS |
| ISO 15341:2014 | Graphic technology Method for radius determination of printing cylinders |
| ISO 11443:2014 | Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers |
| BS ISO 16143-1:2014 | Stainless steels for general purposes Corrosion-resistant flat products |
| BS EN 4700-003:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube |
| I.S. EN 3908:2017 | AEROSPACE SERIES - NIPPLES, LUBRICATING, AXIAL TYPE, IN CORROSION RESISTING STEEL, PASSIVATED |
| 16/30348401 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| BS EN 16602-70-46:2014 | Space product assurance. Requirements for manufacturing and procurement of threaded fasteners |
| BS ISO 16635-1 : 2013 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| 11/30240285 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| 13/30246059 DC : 0 | BS ISO 15341 - GRAPHIC TECHNOLOGY - METHOD FOR RADIUS DETERMINATION OF PRINTING CYLINDERS |
| DIN EN ISO 17937:2016-01 | Dentistry - Osteotome (ISO 17937:2015) |
| BS EN 60372:2004 | Locking devices for ball and socket couplings of string insulator units. Dimensions and tests |
| 11/30212226 DC : 0 | BS ISO 21672-1 - DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
| 02/563622 DC : DRAFT AUG 2002 | BS EN ISO 1562 - DENTISTRY - CASTING GOLD ALLOYS |
| UNI EN ISO 16635-1 : 2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH |
| PREN 10088-2 : DRAFT 2011 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 16877:2015 | Round steel short link chains for lifting purposes Fine tolerance hoist chains for hand operated chain hoists Grade TH |
| 04/30098250 DC : DRAFT MAY 2004 | EN ISO 6507-2 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 12891-2:2014 | Retrieval and analysis of surgical implants Analysis of retrieved surgical implants |
| 12/30246071 DC : 0 | BS ISO 15787 - TECHNICAL PRODUCT DOCUMENTATION - HEAT-TREATED FERROUS PARTS - PRESENTATION AND INDICATIONS |
| 13/30252136 DC : 0 | BS ISO 16468 - INVESTMENT CASTINGS (STEEL, NICKEL ALLOYS AND COBALT ALLOYS) - GENERAL TECHNICAL REQUIREMENTS |
| BS ISO 404:2013 | Steel and steel products. General technical delivery requirements |
| BS EN 50109-2-5:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Termination of twin-ax cable for databus applications |
| 15/30312459 DC : 0 | BS EN ISO 5182 - RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| 09/30201953 DC : 0 | BS EN ISO 14271 - RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| 05/30136491 DC : DRAFT JUL 2005 | EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| BS ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for hardness of monolithic ceramics at room temperature |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| BS ISO 17744:2004 | Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method |
| API 11D1 REDLINE : 2009 | PACKERS AND BRIDGE PLUGS |
| BS 2000-450(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - TEST METHOD |
| UNE-EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| UNE-EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| 07/30144587 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| 07/30144593 DC : 0 | BS ISO 10384 - HOT-ROLLED CARBON STEEL SHEET AS DEFINED BY CHEMICAL COMPOSITION |
| BS ISO 4498:2005 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| BS EN 50340:2010 | Hydraulic cable cutting devices. Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| 00/121221 DC : DRAFT MARCH 2000 | ISO/CE 1133 - PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| CEI EN 60372 : 2005 | LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
| BS EN 60352-1:1998 | Solderless connections Wrapped connections. General requirements, test methods and practical guidance |
| I.S. EN ISO 17937:2015 | DENTISTRY - OSTEOTOME (ISO 17937:2015) |
| I.S. EN ISO 80079-36:2016 | EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO/DIS 80079-36:2014) |
| 05/30091555 DC : DRAFT MAY 2005 | ISO 3183 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPE FOR PIPELINE TRANSPORTATION SYSTEMS |
| 07/30139533 DC : 0 | BS ISO 13337 - SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| ISO 3077:2001 | Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain |
| I.S. EN ISO 10477:2004 | DENTISTRY - POLYMER-BASED CROWN AND BRIDGE MATERIALS |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| UNI EN ISO 2702 : 2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| ONORM EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| UNE-EN 14399-1:2016 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| ISO 16798:2004 | Links of Grade 8 for use with slings |
| ISO/TR 10809-1:2009 | Cast irons — Part 1: Materials and properties for design |
| I.S. EN 16273:2014 | RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| ISO 1797:2017 | Dentistry — Shanks for rotary and oscillating instruments |
| BS EN ISO 11961:2008 | Petroleum and natural gas industries. Steel drill pipe |
| OIML G 3 : 1983 | FACTORS INFLUENCING HARDNESS MEASUREMENT (A SYSTEMATIC SURVEY OF RESEARCH RESULTS) |
| I.S. EN ISO 14457:2017 | DENTISTRY - HANDPIECES AND MOTORS (ISO 14457:2017) |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| I.S. EN ISO 14998:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES (ISO 14998:2013) |
| ISO 6931-2:2005 | Stainless steels for springs Part 2: Narrow strip |
| ISO 4875-2:2006 | Metal-cutting band saw blades — Part 2: Characteristics and dimensions |
| ISO 18203:2016 | Steel — Determination of the thickness of surface-hardened layers |
| ISO 9873:2017 | Dentistry Intra-oral mirrors |
| ISO 7091:2000 | Plain washers Normal series Product grade C |
| EN ISO 11961:2008/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| DIN EN ISO 19715:2016-03 (Draft) | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| PREN 12797 : DRAFT 2017 | BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| UNE-EN ISO 14457:2013 | Dentistry - Handpieces and motors (ISO 14457:2012) |
| I.S. EN ISO 9873:2017 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| UNE-EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| ISO 16143-1:2014 | Stainless steels for general purposes Part 1: Corrosion-resistant flat products |
| I.S. EN ISO 9015-1:2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| I.S. EN ISO 16635-2:2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| UNE-EN ISO 14271:2018 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
| UNE-EN 16273:2015 | Railway applications - Track - Forged rail transitions |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| PREN 1337-6 : DRAFT 2018 | STRUCTURAL BEARINGS - PART 6: ROCKER BEARINGS |
| BS EN ISO 6506-2:2014 | Metallic materials. Brinell hardness test Verification and calibration of testing machines |
| NF EN ISO 17078-3 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ASTM F 3056 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| UNE-EN 10088-4:2010 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| DIN EN 14399-9:2016-01 (Draft) | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| ASTM F 3055 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN ISO 6507-3:2018 | Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2018) |
| ASTM F 3055 : 2014 : EDT 1 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion |
| EN ISO 6507-2:2018 | Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2018) |
| EN ISO 6507-4:2018 | Metallic materials - Vickers hardness test - Part 4: Tables of hardness values (ISO 6507-4:2018) |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| I.S. EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| I.S. ISO 6441:1988 | PAINTS AND VARNISHES - INDENTATION TEST (SPHERICAL OR PYRAMIDAL) |
| ISO 683-13:1974 | Heat-treated steels, alloy steels and free-cutting steels Part 13: Wrought stainless steels |
| I.S. EN 3299:2007 | AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER PLATED - TECHNICAL SPECIFICATION |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN 14730-1:2014-05 (Draft) | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN ISO 80079-36 E : 2016 | EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES - BASIC METHOD AND REQUIREMENTS (ISO 80079-36:2016) |
| DIN EN ISO 4498:2010-11 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| BS EN ISO 10666:1999 | Drilling screws with tapping screw threads. Mechanical and functional properties |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| ISO 7092:2000 | Plain washers Small series Product grade A |
| ISO 80079-36:2016 | Explosive atmospheres Part 36: Non-electrical equipment for explosive atmospheres Basic method and requirements |
| BS EN 772-1 : 2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| ISO 18265:2013 | Metallic materials — Conversion of hardness values |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| UNE-EN ISO 13337:2010 | Spring-type straight pins. Slotted, light duty (ISO 13337:2009) |
| BS EN 12797:2000 | Brazing. Destructive tests of brazed joints |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| UNE-EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| BS EN ISO 898-6:1996 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| BS EN 10109-3:1996 | Metallic materials. Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A, B, C, D, E, F, G, H, K, N, T) |
| BS EN 1337-2:2004 | Structural bearings Sliding elements |
| UNE-EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
| BS EN 14399-1:2015 | High-strength structural bolting assemblies for preloading General requirements |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 485-1:2016 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 6508-2:2015 | METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES AND INDENTERS (ISO 6508-2:2015) |
| I.S. EN ISO 13628-2:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| I.S. EN ISO 8751:2007 | SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
| DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
| I.S. EN 772-1:2011 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN ISO 10510:2011 | TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS |
| I.S. EN ISO 7153-1:2016 | SURGICAL INSTRUMENTS - MATERIALS - PART 1: METALS (ISO 7153-1:2016) |
| I.S. EN ISO 5470-1:2016 | RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER (ISO 5470-1:2016) |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| I.S. EN ISO 7085:2000 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| I.S. EN ISO 8750:2007 | SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
| I.S. EN ISO 8752:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 1301-1:2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 1043-1:1996-02 | DESTRUCTIVE TEST ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| I.S. EN ISO 15156-2:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 2: CRACKING-RESISTANT CARBON AND LOW-ALLOY STEELS, AND THE USE OF CAST IRONS (ISO 15156-2:2015) |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN 34820:2004-05 | CHAMFERED PLAIN WASHERS FOR USE IN STRUCTURAL STEELWORK |
| I.S. EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN EN 1172:2012-02 | Copper and copper alloys - Sheet and strip for building purposes |
| I.S. EN ISO 3887:2018 | STEELS - DETERMINATION OF THE DEPTH OF DECARBURIZATION (ISO 3887:2017) |
| DIN EN 1057:2010-06 | Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications (includes Amendment A1:2010) |
| DIN EN 10003-2:1995-01 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| DIN EN ISO 16744:2004-05 | DENTISTRY - BASE METAL MATERIALS FOR FIXED DENTAL RESTORATIONS |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN 818-7:2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 2702:2011 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| I.S. EN ISO 1522:2006 | PAINTS AND VARNISHES - PENDULUM DAMPING TEST |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| DIN EN 10088-2:2014-12 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN ISO 10673:2009 | PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| EN ISO 15156-2:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of cast irons (ISO 15156-2:2015) |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN ISO 18265:2013 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| I.S. EN 1172:2011 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| DIN EN 13463-1:2009-07 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 772-1:2000-09 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN ISO 14310:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| I.S. EN 13348:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN ISO 14727:1999 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| DIN EN ISO 1133:2000-02 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| DIN EN ISO 1133:2005-09 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| I.S. EN ISO 13337:2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| EN ISO 15156-3:2015 | Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys (ISO 15156-3:2015) |
| I.S. EN 14730-1:2017 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| I.S. EN 10003-2:1995 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION OF BRINELL HARDNESS TESTING MACHINES |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| DIN EN ISO 6506-2:2015-02 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| DIN EN ISO 11970:2016-08 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN ISO 10451:2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| I.S. EN ISO 11970:2016 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS (ISO 11970:2016) |
| I.S. EN 12735-2:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 2: TUBES FOR EQUIPMENT |
| I.S. EN ISO 4498:2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN 14399-1:2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| SBAC TS 220 : 1 | TECHNICAL SPECIFICATION FOR UNION NUTS, SELF-LOCKING (UNIFIED THREADS) - HIGH TEMPERATURE NICKEL ALLOY INCONEL 718 CLASSIFICATION R[M] >= 1270 MPA (185000 LBF/IN[2]) @ T[A]/+705 DEGREES C |
| BS 2782-3:Method 370:1996 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
| BS 2782-7.720A(1997) : 1997 AMD 10722 | METHODS OF TESTING PLASTICS - RHEOLOGICAL PROPERTIES - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS 1016-111:1998 | Methods for analysis and testing of coal and coke Determination of abrasion index of coal |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| ONORM EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
| DIN EN ISO 16635-2 E : 2014 | DENTISTRY - DENTAL RUBBER DAM INSTRUMENTS - PART 2: CLAMP FORCEPS (ISO 16635-2:2014) |
| UNE-EN ISO 12690:2011 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| ASTM F 3302 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion |
| BS EN 14587-1:2007 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| 07/30161097 DC : 0 | EN ISO 14310 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT PACKERS AND BRIDGE PLUGS |
| 06/30143291 DC : DRAFT MAY 2006 | ISO 5182 - WELDING - MATERIALS FOR RESISTANCE WELDING ELECTRODES AND ANCILLARY EQUIPMENT |
| 16/30290361 DC : 0 | BS EN ISO 6507-3 - METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| API SPEC 19OH : 2018 | OPENHOLE ISOLATION EQUIPMENT |
| 14/30278521 DC : 0 | BS EN ISO 18556 - DENTISTRY - INTRAORAL SPATULAS |
| I.S. EN 13463-1:2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| I.S. EN ISO 1562:2004 | DENTISTRY - CASTING GOLD ALLOYS |
| BS EN ISO 12690:2010 | Metallic and other inorganic coatings. Thermal spray coordination. Tasks and responsibilities |
| DIN EN ISO 16635-1:2014-09 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| BS ISO 17218:2014 | Sterile acupuncture needles for single use |
| DIN EN ISO 16859-2:2016-02 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| BS EN 4700-004:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Wire |
| 09/30196832 DC : 0 | BS ISO 12690 - THERMAL SPRAYING - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| 11/30215841 DC : 0 | BS EN ISO 14457 - DENTISTRY - HAND PIECES AND MOTORS |
| BIS IS 1239-2 : 2011 AMD 1 2012 | STEEL TUBES, TUBULARS AND OTHER STEEL FITTINGS - SPECIFICATION - PART 2: STEEL PIPE FITTINGS |
| BS ISO 17918:2015 | Corrosion of metals and alloys. Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement |
| BS ISO 12900:2015 | Hard coal. Determination of abrasiveness |
| 15/30285035 DC : 0 | BS EN ISO 14917 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| BS ISO 9154:2016 | Aerospace. Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| I.S. EN ISO 1797-1:2011 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
| 04/30074924 DC : DRAFT JUNE 2004 | EN ISO 6508-3 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 3: CALIBRATION AND REFERENCE BLOCKS (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 18556 E : 2016 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| DIN EN ISO 1797 E : 2017 | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| CEI EN 50340 : 2011 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| 07/30154260 DC : 0 | BS ISO 23848-1 - MACHINE TOOLS - BALL SPLINES - PART 1: CLASSIFICATION AND GEOMETRICAL REQUIREMENTS |
| I.S. EN 843-4:2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| I.S. EN ISO 898-6:1996 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| BS EN 20898-6:1992 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| 13/30286988 DC : 0 | BS EN 16662 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - SAFETY REQUIREMENTS AND TEST METHOD |
| 17/30346741 DC : 0 | BS EN 10225-1 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 1: PLATES |
| UNE-EN ISO 17509:2017 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| I.S. EN 10109-2:1995 | METALLIC MATERIALS - HARDNESS TEST - PART 2: VERIFICATION OF ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| 05/30128683 DC : DRAFT FEB 2005 | ISO 5857 - AEROSPACE - BOLTS, WITH MJ THREADS, MADE OF ALLOY STEEL, STRENGTH CLASS 1250 MPA - PROCUREMENT SPECIFICATION |
| I.S. EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT-MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| 09/30193829 DC : 0 | BS EN ISO 1797-1 - DENTAL ROTARY INSTRUMENTS - SHANKS - PART 1: SHANKS MADE OF METALS |
| UNE-EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| BS EN 4700-002:2016 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Bar and section |
| UNI EN 4700-005 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| DIN EN ISO 18556:2016-09 | DENTISTRY - INTRAORAL SPATULAS (ISO 18556:2016) |
| DIN EN ISO 12670 E : 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| PREN 14399-9 : DRAFT 2015 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| BS EN ISO 9015-1:2011 | Destructive tests on welds in metallic materials. Hardness testing Hardness test on arc welded joints |
| 11/30254171 DC : 0 | BS EN 10088-2 - STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 4700-004 : 2011 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| 15/30269176 DC : 0 | BS ISO 6336-5 - CALCULATION OF LOAD CAPACITY OF SPUR AND HELICAL GEARS - PART 5: STRENGTH AND QUALITY OF MATERIALS |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| 06/19981869 DC : DRAFT OCT 2006 | BS ISO 16877 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE TH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| DIN EN 15594 E : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 12/30245294 DC : 0 | BS ISO 16635-1 - DENTISTRY - DENTAL DAM TECHNIQUE - PART 1: HOLE PUNCH |
| 07/30162661 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| DIN EN 14587-2:2009-08 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| 16/30339349 DC : DRAFT APR 2016 | BS EN ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 5857:2008 | Aerospace. Bolts, with MJ threads, made of alloy steel, strength class 1250 MPa. Procurement specification |
| DIN EN ISO 17945 E : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| 11/30210148 DC : 0 | BS EN ISO 18265 - METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| API 5DP : 2010(R2015) | SPECIFICATION FOR DRILL PIPE |
| DIN EN ISO 1797-3:2013-06 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS (ISO 1797-3:2013) |
| BS 5600-3.11.1:1991 | Powder metallurgical materials and products. Methods of testing sintered metal material and products, excluding hard metals. Determination of apparent hardness. Materials of essentially uniform section hardness |
| UNE-EN 14587-2:2010 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| ISO 8535-1:2016 | Diesel engines Steel tubes for high-pressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes |
| 02/703231 DC : DRAFT FEB 2002 | BS EN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S- CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
| ISO 10384:2012 | Hot-rolled carbon steel sheet as defined by chemical composition |
| 14/30281833 DC : 0 | BS EN ISO 17509 - DENTISTRY - TORQUE TRANSMITTER FOR HANDPIECES USED FOR IMPLANTATION |
| 06/19981867 DC : DRAFT OCT 2006 | BS ISO 16872 - SHORT LINK CHAIN FOR LIFTING PURPOSES - GRADE VH, FINE TOLERANCE FOR MANUALLY OPERATED CHAIN HOISTS |
| 02/712761 DC : DRAFT OCT 2002 | ISO 15509-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - INDUCTION BENDS, FITTINGS AND FLANGES FOR PIPELINE TRANSPORTATION SYSTEMS - PART 2: FITTINGS |
| 14/30272288 DC : 0 | BS ISO 18203 - STEELS - DETERMINATION OF THE THICKNESS OF SURFACE-HARDENED LAYERS |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| 16/30328578 DC : 0 | BS ISO 14705 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR HARDNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE |
| DIN EN ISO 12679 E : 2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| 17/30312468 DC : 0 | BS ISO 15461 - STEEL FORGINGS - TESTING FREQUENCY, SAMPLING CONDITIONS AND TEST METHODS FOR MECHANICAL TESTS |
| I.S. EN ISO 19490:2017 | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| BS EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials. Hardness testing Microhardness testing of welded joints |
| BS ISO 23848-1:2009 | Machine tools. Ball splines General characteristics and requirements |
| BS EN ISO 5182:2009 | Resistance welding. Materials for electrodes and ancillary equipment |
| PREN 12451 : DRAFT 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| BS EN 16771:2016 | Railway applications. Infrastructure. Aluminothermic welding of grooved rails |
| BS EN 15551:2017 | Railway applications. Railway rolling stock. Buffers |
| 99/121962 DC : DRAFT JUN 1999 | EN ISO 3126 - PLASTICS PIPING SYSTEMS - PLASTICS PIPING COMPONENTS - MEASUREMENT AND DETERMINATION OF DIMENSIONS |
| API 17G:2006 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| 05/30126202 DC : 0 | EN 10088-4 - STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNE-EN 50340:2011 | Hydraulic cable cutting devices - Devices to be used on electrical installations with nominal voltage up to AC 30 kV |
| BS EN 50109-2-2 : 1996 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-2: PARTICULAR REQUIREMENTS FOR RADIO FREQUENCY CONNECTORS AND CONCENTRIC CONTACTS - OPEN THROAT TOOLS WITH REMOVABLE AND INTERCHANGEABLE DIES, SIZES A TO G, Q TO T, V AND W |
| ISO 19207:2016 | Thermal spraying — Classification method of adhesive strength by indentation |
| BS EN ISO 14271:2017 | Resistance welding. Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| UNE-EN ISO 9015-2:2016 | Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2016) |
| UNE-ISO 23848-1:2013 | Machine tools -- Ball splines -- Part 1: General characteristics and requirements |
| ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys) General technical requirements |
| DIN EN ISO 6507-3:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 17/30351887 DC : 0 | BS EN 1015-11 - METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| DIN EN ISO 19490 E : 2017 | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| API 2SF : 2013 | MANUFACTURE OF STRUCTURAL STEEL FORGINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| API 17G : 2006 : R2011 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| DIN EN ISO 19490:2016-07 (Draft) | DENTISTRY - SINUS MEMBRANE ELEVATOR (ISO 19490:2017) |
| API 11D1 CHINESE : 2009 | PACKERS AND BRIDGE PLUGS |
| I.S. EN 4700-001:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| I.S. EN ISO 16635-1:2014 | DENTISTRY - DENTAL RUBBER DAM TECHNIQUE - PART 1: HOLE PUNCH (ISO 16635-1:2013) |
| ISO 15461:2018 | Steel forgings — Testing frequency, sampling conditions and test methods for mechanical tests |
| ISO 9140:1998 | Aerospace Nuts, plain or slotted (castellated) Test methods |
| I.S. EN 4677-001:2012 | AEROSPACE SERIES - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTION - JOINTS OF METALLIC MATERIALS BY ELECTRON BEAM WELDING - PART 001: QUALITY OF WELDED ASSEMBLIES |
| UNI EN 4700-003 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| ISO 28079:2009 | Hardmetals — Palmqvist toughness test |
| ISO 6507-4:2018 | Metallic materials — Vickers hardness test — Part 4: Tables of hardness values |
| ONORM EN ISO 6507-3 : 2006 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| UNE-EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| ISO 17218:2014 | Sterile acupuncture needles for single use |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| UNE-EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| ISO 6207:1992 | Seamless nickel and nickel alloy tube |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
| ONORM EN ISO 6506-2 : 2015 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| UNI EN 4700-007 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| I.S. EN 4700-006:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 006: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| ISO 716:1986 | Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| ISO 23848-1:2009 | Machine tools Ball splines Part 1: General characteristics and requirements |
| EN ISO 1797 : 2017 | DENTISTRY - SHANKS FOR ROTARY AND OSCILLATING INSTRUMENTS (ISO 1797:2017) |
| UNI EN ISO 11961 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| EN 14587-1:2007 | Railway applications - Track - Flash butt welding of rails - Part 1: New R220, R260, R260Mn and R350HT grade rails in a fixed plant |
| I.S. EN 10225:2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 7492:2018 | DENTISTRY - DENTAL EXPLORER (ISO 7492:2018) |
| ISO 17804:2005 | Founding Ausferritic spheroidal graphite cast irons Classification |
| ISO 7492:2018 | Dentistry — Dental explorer |
| DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
| I.S. EN 1057:2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| ISO 14271:2017 | Resistance welding — Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds |
| I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 3183-3:1999 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 3: Pipes of requirement class C |
| UNE-EN 10088-2:2015 | Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| I.S. EN ISO 7091:2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| DIN EN 1669:1997-02 | ALUMINIUM AND ALUMINIUM ALLOYS - TEST METHODS - EARING TEST FOR SHEET AND STRIP |
| I.S. EN 10132-1:2000 | COLD ROLLED NARROW STEEL STRIP FOR HEAT TREATMENT - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN ISO 13628-2:2006/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| DIN EN ISO 7093-1:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A |
| DIN EN ISO 8751 E : 2007 | SPRING-TYPE STRAIGHT PINS - COILED, LIGHT DUTY |
| DIN EN 10328:2005-04 | Iron and steel - Determination of the conventional depth of hardening after surface heating |
| DIN EN 14436 E : 2004 | COPPER AND COPPER ALLOYS - ELECTROLYTICALLY TINNED STRIP |
| UNE-EN 14730-1:2018 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| DIN EN 1337-2:2004-07 | Structural bearings - Part 2: Sliding elements; German version EN 1337-2:2004 |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| ISO 8748:2007 | Spring-type straight pins Coiled, heavy duty |
| BS EN 1043-2:1997 | Destructive tests on welds in metallic materials. Hardness testing Micro hardness testing on welded joints |
| BS EN 12735-2:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for equipment |
| BS EN ISO 642:1999 | Steel hardenability test by end quenching (Jominy test) |
| ISO 1133-1:2011 | Plastics Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
| BS EN ISO 14923:2003 | Thermal spraying. Characterization and testing of thermally sprayed coatings |
| BS EN 14436:2004 | Copper and copper alloys. Electrolytically tinned strip |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| ISO 16635-1:2013 | Dentistry — Dental rubber dam technique — Part 1: Hole punch |
| ISO 9015-1:2001 | Destructive tests on welds in metallic materials Hardness testing Part 1: Hardness test on arc welded joints |
| BS EN 657:2005 | Thermal spraying. Terminology, classification |
| ISO 9015-2:2016 | Destructive tests on welds in metallic materials Hardness testing Part 2: Microhardness testing of welded joints |
| ISO 2702:2011 | Heat-treated steel tapping screws — Mechanical properties |
| UNE-EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| ISO 7090:2000 | Plain washers, chamfered Normal series Product grade A |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| UNE-EN ISO 1797-1:2012 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN 60372:2004 | Locking devices for ball and socket couplings of string insulator units - Dimensions and tests |
| EN ISO 6506-2:2014 | Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2014) |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| UNE-EN 10225:2010 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| EN ISO 1522:2006 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| EN ISO 8748:2007 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| EN 485-1:2016 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| EN ISO 16635-1:2014 | Dentistry - Dental rubber dam technique - Part 1: Hole punch (ISO 16635-1:2013) |
| EN ISO 2639:2002 | Steels - Determination and verification of the depth of carburized and hardened cases (ISO 2639:2002) |
| EN ISO 7085 : 1999 | MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS |
| EN ISO 16744:2003 | Dentistry - Base metal materials for fixed dental restorations (ISO 16744:2003) |
| EN ISO 14923:2003 | Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003) |
| EN ISO 17937:2015 | Dentistry - Osteotome (ISO 17937:2015) |
| UNI EN 1057 : 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| UNI EN 13348 : 2008 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR MEDICAL GASES OR VACUUM |
| UNI EN ISO 4498 : 2010 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| UNI EN 10225 : 2009 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 1172 : 2012 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| UNI EN 12513 : 2011 | Founding - Abrasion resistant cast irons |
| UNI EN ISO 10673 : 2009 | PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| UNI EN ISO 8752 : 2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| UNI EN ISO 10451 : 2010 | DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| UNI EN 1337-2 : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| UNI EN ISO 10510 : 2011 | TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS |
| UNI EN ISO 18265 : 2014 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES |
| I.S. EN ISO 7094:2000 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| UNI EN 13463-1 : 2009 | NON-ELECTRICAL EQUIPMENT FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES - PART 1: BASIC METHOD AND REQUIREMENTS |
| UNI EN 1652 : 1999 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| UNI EN 12451 : 2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| UNI EN ISO 13628-2 : 2007 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 2: UNBONDED FLEXIBLE PIPE SYSTEMS FOR SUBSEA AND MARINE APPLICATIONS |
| UNI EN ISO 3506-4 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 13337 : 2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, LIGHT DUTY |
| I.S. EN ISO 2639:2002 | STEELS - DETERMINATION AND VERIFICATION OF THE DEPTH OF CARBURIZED AND HARDENED CASES |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN 10328:2005 | IRON AND STEEL - DETERMINATION OF THE CONVENTIONAL DEPTH OF HARDENING AFTER SURFACE HEATING |
| UNI EN 818-7 : 2008 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| UNI EN ISO 1797-1 : 2011 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS |
| UNI EN 12450 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| UNI EN ISO 14310 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - PACKERS AND BRIDGE PLUGS |
| UNI EN 10088-2:2014 | STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN 12452 : 2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| UNI EN 1301-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - DRAWN WIRE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| UNI EN ISO 14998 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - COMPLETION ACCESSORIES |
| UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| UNI EN 14163 : 2003 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
| UNI EN 15594 : 2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| API 2SC : 2010 | MANUFACTURE OF STRUCTURAL STEEL CASTINGS FOR PRIMARY OFFSHORE APPLICATIONS |
| BIS IS 1501-2 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| BS ISO 20826:2006 | Automotive LPG components. Containers |
| 08/30180052 DC : DRAFT MAR 2008 | BS EN 50340 AMD1 - HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| 15/30282343 DC : 0 | BS ISO 18746 - TRADITIONAL CHINESE MEDICINE - INTRADERMAL ACUPUNCTURE NEEDLES |
| 03/100442 DC : DRAFT MAY 2003 | IEC 60352-2 ED.2 - SOLDERLESS CONNECTIONS - PART 2: SOLDERLESS CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| 15/30317619 DC : 0 | BS EN ISO 5470-1 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF ABRASION RESISTANCE - PART 1: TABER ABRADER |
| DIN 17750:2002-09 | Wrought nickel and nickel alloys sheet, plate and strip - Requirements and testing |
| BS 7251-7:1990 | Orthopaedic joint prostheses Guide to hip joint simulators |
| 12/30245297 DC : 0 | BS EN ISO 16635-2 - DENTISTRY - RUBBER DAM TECHNIQUE - PART 2: RUBBER DAM CLAMP FORCEPS |
| BS ISO 12670 : 2011 COR 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 16/30302544 DC : 0 | BS EN ISO 9873 - DENTISTRY - INTRA-ORAL MIRRORS |
| UNI EN ISO 1133-1 : 2012 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| ISO 898-3:2018 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes |
| I.S. EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| 04/30118524 DC : DRAFT AUG 2004 | EN 1057 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| 08/30179025 DC : DRAFT MAR 2008 | BS EN ISO 10673 - PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES - SMALL, NORMAL AND LARGE SERIES - PRODUCT GRADE A |
| BS EN 14587-3:2012 | Railway applications. Track. Flash butt welding of rails Welding in association with crossing construction |
| I.S. EN ISO 12670:2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| BS EN ISO 22068:2014 | Sintered-metal injection-moulded materials. Specifications |
| DIN 21530-4:2016-09 | MINE SUPPORT - PART 4: TESTING |
| 09/30208233 DC : 0 | BS ISO 2702 - HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| BS EN 16725:2016 | Railway applications. Track. Restoration and repair of manganese crossings |
| PREN 485-2 : DRAFT 99 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| DIN EN 10088-4:2010-01 | Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| 13/30264734 DC : 0 | BS ISO 17918 - EVALUATION OF SELECTIVE CORROSION OF ALLOYS BY VISUAL INSPECTION AND HARDNESS MEASUREMENT |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| 10/30215691 DC : DRAFT NOV 2010 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| 99/710776 DC : DRAFT JULY 1999 | PREN 485-2 - ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 2: MECHANICAL PROPERTIES |
| 02/120925 DC : DRAFT MAR 2002 | ISO/DIS 11443 - PLASTICS - DETERMINATION OF THE FLUIDITY OF PLASTICS USING CAPILLARY AND SLIT-DIE RHEOMETERS |
| DIN 13950-1:1990-05 | DENTISTRY - DENTAL ROTARY INSTRUMENTS - SHANKS |
| 14/30297210 DC : 0 | BS EN 16273 - RAILWAY APPLICATIONS - TRACK - FORGED RAIL TRANSITIONS |
| 09/30183435 DC : 0 | BS EN ISO 1133-1 - PLASTICS DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD |
| ISO 6506-2:2017 | Metallic materials Brinell hardness test Part 2: Verification and calibration of testing machines |
| ISO 7741:1986 | Instruments for surgery — Scissors and shears — General requirements and test methods |
| 02/702536 DC : DRAFT FEB 2002 | PREN ISO 15156-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS |
| 09/30180393 DC : 0 | BS EN ISO 10451 - DENTISTRY - CONTENTS OF TECHNICAL FILE FOR DENTAL IMPLANT SYSTEMS |
| 13/30259011 DC : 0 | BS ISO 17218 - STERILE ACUPUNCTURE NEEDLES FOR SINGLE USE |
| BS ISO 28079:2009 | Hardmetals. Palmqvist toughness test |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 13/30264459 DC : 0 | BS EN ISO 6508-2 - METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| 16/30310674 DC : 0 | BS EN ISO 14457 - DENTISTRY - HANDPIECES AND MOTORS |
| BS EN 14587-2:2009 | Railway applications. Track. Flash butt welding of rails New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| UNI EN ISO 22068 : 2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS |
| 13/30268502 DC : 0 | BS ISO 16877 - ROUND STEEL SHORT LINK CHAINS FOR LIFTING PURPOSES - FINE TOLERANCE HOIST CHAINS FOR HAND OPERATED CHAIN HOISTS - GRADE TH |
| 11/30211730 DC : 0 | BS ISO 9352 - PLASTICS - DETERMINATION OF RESISTANCE TO WEAR BY ABRASIVE WHEELS |
| DIN EN ISO 9015-1:2011-05 | Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) |
| BS ISO 9352:2012 | Plastics. Determination of resistance to wear by abrasive wheels |
| BS 3900-E15(1997) : 1997 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE RUBBER WHEEL) |
| BS EN ISO 1133-1:2011 | Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics Part 1: Standard method |
| 04/30109383 DC : DRAFT MAY 2004 | ISO 8535-1 - COMPRESSION-IGNITION ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| 12/30250146 DC : 0 | BS ISO 16143-1 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 1: FLAT PRODUCTS |
| 17/30323194 DC : 0 | BS EN ISO 20569 - DENTISTRY - TREPHINE BURS |
| DD ENV 1090-1:1998 | Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| BS EN ISO 15156-3:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| ISO 6507-3:2018 | Metallic materials — Vickers hardness test — Part 3: Calibration of reference blocks |
| BS EN 50109-2-1:1996 | Radio frequency connectors and concentric contacts. Open throat tools with fixed dies, sizes A to E, V and WHand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements |
| 17/30323197 DC : 0 | BS EN ISO 20570 - DENTISTRY - ORAL SURGICAL SCALPEL HANDLE |
| DIN EN ISO 17937 E : 2016 | DENTISTRY - OSTEOTOME (ISO 17937:2015) |
| 04/301144 DC : DRAFT JAN 2004 | ISO 6931-2 - STAINLESS STEELS FOR SPRINGS - PART 2: NARROW STRIP |
| 05/30136401 DC : DRAFT JULY 2005 | ISO 8642 - AEROSPACE - SELF-LOCKING NUTS WITH MAXIMUM OPERATING TEMPERATURE GREATER THAN 425 DEGREES C - TEST METHODS |
| BS ISO 16872:2015 | Round steel short link chains for lifting purposes. Fine tolerance hoist chains for hand operated chain hoists. Grade VH |
| 03/106174 DC : DRAFT APR 2003 | ISO 22826 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING OF NARROW WELDED JOINTS BY LASER AND ELECTRON BEAM (VICKERS AND KNOOP HARDNESS TESTS) |
| 10/30229550 DC : 0 | BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| GOST R ISO 8891 : 2005 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% - TECHNICAL REQUIREMENTS - TEST METHODS |
| I.S. EN 60372:2004 | LOCKING DEVICES FOR BALL AND SOCKET COUPLINGS OF STRING INSULATOR UNITS - DIMENSIONS AND TESTS |
| BS ISO 12156-1:1997 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| 13/30242622 DC : 0 | BS ISO 12891-2 - RETRIEVAL AND ANALYSIS OF SURGICAL IMPLANTS - PART 2: ANALYSIS OF RETRIEVED SURGICAL IMPLANTS |
| BS ISO 20267:2017 | Thermal spraying. Determination of interfacial toughness of ceramic coatings by indentation |
| BS ISO 16468:2015 | Investment castings (steel, nickel alloys and cobalt alloys). General technical requirements |
| BS ISO 22826:2005 | Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) |
| 04/30103964 DC : DRAFT MAY 2004 | BS ISO 16070 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| 04/30107683 DC : DRAFT DEC 2004 | BS EN ISO 15136-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMPS SYSTEMS FOR ARTIFICIAL LIFT - PART 2: SURFACE DRIVE SYSTEMS |
| API 2RD : 2013 | DYNAMIC RISERS FOR FLOATING PRODUCTION SYSTEMS |
| BS EN ISO 9873:2017 | Dentistry. Intra-oral mirrors |
| UNI EN ISO 21672-1 : 2012 | DENTISTRY - PERIODONTAL PROBES - PART 1: GENERAL REQUIREMENTS |
| BS 7598(1992) : 1992 AMD 8488 | SPECIFICATION FOR MECHANICAL PROPERTIES OF HEAT-TREATED STEEL TAPPING SCREWS |
| UNI EN ISO 1797-3 : 2013 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 3: SHANKS MADE OF CERAMICS |
| API 17G : 2006 : R2016 | RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS |
| 08/30141132 DC : DRAFT APR 2008 | BS EN ISO 10423 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - WELLHEAD AND CHRISTMAS TREE EQUIPMENT |
| ISO 674:1988 | Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) |
| 04/30123693 DC : DRAFT OCT 2004 | EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
| NF EN ISO 11961 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| ISO 14190:1998 | Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification |
| BS EN 10088-4:2009 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes |
| BS EN ISO 14917:2017 | Thermal spraying. Terminology, classification |
| API 17J REDLINE : 2008 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| ASTM F 3056 : 2014 | Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion |
| ASTM F 2924 : 2014 : REDLINE | Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion |
| API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| ISO 6621-3:2000 | Internal combustion engines Piston rings Part 3: Material specifications |
| BS EN ISO 7492:2018 | Dentistry. Dental explorer |
| NF EN ISO 12690 : 2011 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| I.S. EN 15551:2017 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| ISO 1355:1989 | Metallic materials Hardness test Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) |
| UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| I.S. EN ISO 14271:2017 | RESISTANCE WELDING - VICKERS HARDNESS TESTING (LOW-FORCE AND MICROHARDNESS) OF RESISTANCE SPOT, PROJECTION, AND SEAM WELDS (ISO 14271:2017) |
| I.S. EN ISO 14918:1999 | THERMAL SPRAYING - APPROVAL TESTING OF THERMAL SPRAYERS |
| BS ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| ISO 7689:2008 | Aerospace Bolts, with MJ threads, made of alloy steel, strength class 1 100 MPa Procurement specification |
| DIN EN ISO 9873 E : 2000 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| ISO 15590-3:2004 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
| KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
| 17/30363994 DC : 0 | BS EN 16662-1 - ROAD VEHICLES - SUPPLEMENTARY GRIP DEVICES FOR TYRES OF PASSENGER CARS AND LIGHT DUTY VEHICLES - PART 1: GENERAL SAFETY AND PERFORMANCE REQUIREMENTS |
| 17/30358164 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF NEW RAILS - PART 1: R220, R260, R260MN, R320CR, R350HT, R350LHT, R370CRHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| CEI EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| DIN EN 14587-1:2016-08 (Draft) | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN FIXED PLANT |
| ASTM E 92 : 2017 : REDLINE | Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials |
| UNI EN 4700-001 : 2011 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| EN ISO 14271:2017 | Resistance welding - Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds (ISO 14271:2017) |
| ONORM EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| ONORM EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 4739:1985 | Wrought copper and copper alloy products Selection and preparation of specimens and test pieces for mechanical testing |
| ISO 1562:2004 | Dentistry Casting gold alloys |
| ISO 20826:2006 | Automotive LPG components Containers |
| ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| I.S. EN ISO 12690:2010 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAY COORDINATION - TASKS AND RESPONSIBILITIES |
| I.S. EN 4700-005:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 005: FORGING STOCK |
| DIN EN ISO 3887:2016-08 (Draft) | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| I.S. EN ISO 6507-3:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 6507-3:2018) |
| I.S. EN 50109-2-5:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-5: PARTICULAR REQUIREMENTS FOR THE TERMINATION OF TWIN-AX CABLE FOR DATABUS APPLICATIONS |
| I.S. EN 14587-1:2007 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN AND R350HT GRADE RAILS IN A FIXED PLANT |
| I.S. EN ISO 6506-2:2014 | METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6506-2:2014) |
| EN 14163:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - WELDING OF PIPELINES |
| DIN EN ISO 8752 E : 2009 | SPRING-TYPE STRAIGHT PINS - SLOTTED, HEAVY DUTY |
| DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| DIN EN ISO 8750 E : 2007 | SPRING-TYPE STRAIGHT PINS - COILED, STANDARD DUTY |
| DIN EN ISO 14233:2003-10 | DENTISTRY - POLYMER-BASED DIE MATERIALS |
| DIN EN ISO 8748 E : 2007 | SPRING-TYPE STRAIGHT PINS - COILED, HEAVY DUTY |
| DIN EN ISO 1797-1:2011-11 | DENTISTRY - SHANKS FOR ROTARY INSTRUMENTS - PART 1: SHANKS MADE OF METALS (ISO 1797-1:2011) |
| DIN EN 485-1:2016-10 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| DIN EN 1337-2 E : 2004 | STRUCTURAL BEARINGS - PART 2: SLIDING ELEMENTS |
| DIN EN 10151:2003-02 | STAINLESS STEEL STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS |
| DIN EN 818-7:2008-07 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| DIN EN ISO 7093-2:2000-11 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| DIN EN 10225:2009-10 | WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS |
| DIN EN ISO 18265:2014-02 | METALLIC MATERIALS - CONVERSION OF HARDNESS VALUES (ISO 18265:2013) |
| BS EN 12811-3:2002 | Temporary works equipment Load testing |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| BS EN 12805:2002 | Automotive LPG components. Containers |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 19715:2017 | Dentistry — Filling instrument with contra angle |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| BS EN 12735-1:2016 | Copper and copper alloys. Seamless, round tubes for air conditioning and refrigeration Tubes for piping systems |
| BS EN 14163:2001 | Petroleum and natural gas industries. Pipeline transportation systems. Welding of pipelines |
| ISO 13337:2009 | Spring-type straight pins — Slotted, light duty |
| BS EN 14870-3:2006 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Flanges |
| ISO 10673:2009 | Plain washers for screw and washer assemblies — Small, normal and large series — Product grade A |
| BS EN ISO 15156-2:2015 | Petroleum and natural gas industries. Materials for use in H2S-containing environments in oil and gas production Cracking-resistant carbon and low alloy steels, and the use of cast irons |
| BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
| ISO 14727:1998 | Dental implants Prefabricated parts connecting suprastructures to dental implants Contents of technical file |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| BS EN ISO 13628-7:2006 | Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems |
| UNE-EN ISO 1522:2007 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
| ISO 17937:2015 | Dentistry Osteotome |
| ISO 15156-3:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys |
| BS EN 23878:1993 | Hardmetals. Vickers hardness test |
| ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
| ISO 16744:2003 | Dentistry Base metal materials for fixed dental restorations |
| BS EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics. Determination of abrasion resistance Taber abrader |
| BS EN ISO 7090:2000 | Plain washers, chamfered. Normal series. Product grade A |
| BS EN ISO 14233:2003 | Dentistry. Polymer-based die materials |
| ISO 8752:2009 | Spring-type straight pins — Slotted, heavy duty |
| ISO 7153-1:2016 | Surgical instruments Materials Part 1: Metals |
| ISO 15087-1:1999 | Dental elevators — Part 1: General requirements |
| ISO 13628-7:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems |
| ISO 1797-3:2013 | Dentistry Shanks for rotary instruments Part 3: Shanks made of ceramics |
| ISO 21672-1:2012 | Dentistry — Periodontal probes — Part 1: General requirements |
| ISO 8750:2007 | Spring-type straight pins Coiled, standard duty |
| ISO 14233:2003 | Dentistry Polymer-based die materials |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| UNE-EN ISO 7153-1:2017 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| BS EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals. Determination of apparent hardness and microhardness |
| BS EN ISO 4516:2002 | Metallic and other inorganic coatings. Vickers and Knoop microhardness tests |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS EN ISO 1562:2004 | Dentistry. Casting gold alloys |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| BS EN ISO 15136-2:2006 | Petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Surface drive systems |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| BS EN ISO 1522:2006 | Paints and varnishes. Pendulum damping test |
| UNI EN 12735-1 : 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| BS EN 818-7 : 2002 | SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 7: FINE TOLERANCE HOIST CHAIN, GRADE T (TYPES T, DAT AND DT) |
| UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| ISO 7093-2:2000 | Plain washers Large series Part 2: Product grade C |
| ISO 3878:1983 | Hardmetals — Vickers hardness test |
| BS EN ISO 15087-1:2001 | Dental elevators General requirements |
| BS EN ISO 14727:1999 | Dental implants. Prefabricated parts connecting suprastructures to dental implants. Contents of technical file |
| BS EN 12390-4:2000 | Testing hardened concrete Compressive strength. Specification for testing machines |
| UNE-EN 12735-2:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| ISO 14917:2017 | Thermal spraying — Terminology, classification |
| ISO 16635-2:2014 | Dentistry Dental rubber dam instruments Part 2: Clamp forceps |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| BS EN ISO 1133:2005 | Plastics. Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| UNE-EN ISO 10673:2010 | Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) |
| ISO 8891:1998 | Dental casting alloys with noble metal content of at least 25 % but less than 75 % |
| EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| ISO 15136-2:2006 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 2: Surface-drive systems |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 5470-1:2016 | Rubber- or plastics-coated fabrics Determination of abrasion resistance Part 1: Taber abrader |
| ISO 1797-1:2011 | Dentistry Shanks for rotary instruments Part 1: Shanks made of metals |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| ISO 16859-2:2015 | Metallic materials — Leeb hardness test — Part 2: Verification and calibration of the testing devices |
| ISO 18556:2016 | Dentistry Intraoral spatulas |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 4498:2010 | Sintered metal materials, excluding hardmetals Determination of apparent hardness and microhardness |
| ISO 7093-1:2000 | Plain washers Large series Part 1: Product grade A |
| I.S. EN 12735-1:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR AIR CONDITIONING AND REFRIGERATION - PART 1: TUBES FOR PIPING SYSTEMS |
| ISO 4498-1:1990 | Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 1: Materials of essentially uniform section hardness |
| ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings |
| ISO 4516:2002 | Metallic and other inorganic coatings — Vickers and Knoop microhardness tests |
| ISO 898-6:1994 | Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| BS EN ISO 8748:2007 | Spring-type straight pins. Coiled, heavy duty |
| ISO 14998:2013 | Petroleum and natural gas industries — Downhole equipment — Completion accessories |
| ISO 14310:2008 | Petroleum and natural gas industries — Downhole equipment — Packers and bridge plugs |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 15156-2:2015 | Petroleum and natural gas industries Materials for use in H2S-containing environments in oil and gas production Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons |
| ISO 1133:2005 | Plastics Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics |
| ISO 15098-1:1999 | Dental tweezers Part 1: General requirements |
| ISO 13625:2002 | Petroleum and natural gas industries — Drilling and production equipment — Marine drilling riser couplings |
| BS EN ISO 2702:2011 | Heat-treated steel tapping screws. Mechanical properties |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| BS EN 3299:2007 | Aerospace series. Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated. Technical specification |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| BS EN ISO 3650:1999 | Geometrical product specifications (GPS). Length standards. Gauge blocks |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| BS EN ISO 2639:2002 | Steels. Determination and verification of the depth of carburized and hardened cases |
| BS EN ISO 10451:2010 | Dentistry. Contents of technical file for dental implant systems |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| UNE-EN ISO 18265:2014 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| ISO 22068:2012 | Sintered-metal injection-moulded materials — Specifications |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 19490:2017 | Dentistry — Sinus membrane elevator |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN ISO 3126:2005 | Plastics piping systems. Plastics components. Determination of dimensions |
| ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
| BS EN ISO 8751:2007 | Spring-type straight pins. Coiled, light duty |
| ISO 12670:2011 | Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
| ISO 2639:2002 | Steels Determination and verification of the depth of carburized and hardened cases |
| ISO 7089:2000 | Plain washers Normal series Product grade A |
| UNE-EN 13348:2016 | Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN ISO 8891:2000 | Dental casting alloys with noble metal content of at least 25% but less than 75% |
| ISO 10451:2010 | Dentistry — Contents of technical file for dental implant systems |
| UNE-EN ISO 898-5:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| UNE-EN 13463-1:2011 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| BS EN ISO 13337:2009 | Spring-type straight pins. Slotted, light duty |
| ISO 17945:2015 | Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| ISO 13628-2:2006 | Petroleum and natural gas industries Design and operation of subsea production systems Part 2: Unbonded flexible pipe systems for subsea and marine applications |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| UNE-EN 485-1:2017 | Aluminium and aluminium alloys - Sheet, strip and plate - Part 1: Technical conditions for inspection and delivery |
| UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| DIN EN ISO 80079-36:2016-12 | Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) |
| DIN EN ISO 3887:2003-10 | STEELS - DETERMINATION OF DEPTH OF DECARBURIZATION |
| EN 20898-6 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| EN 15594:2009 | Railway applications - Track - Restoration of rails by electric arc welding |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN ISO 11970:2016 | Specification and qualification of welding procedures for production welding of steel castings (ISO 11970:2016) |
| EN ISO 7089 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE A |
| EN 14587-2:2009 | Railway applications - Track - Flash butt welding of rails - Part 2: New R220, R260, R260Mn and R350HT grade rails by mobile welding machines at sites other than a fixed plant |
| EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries - Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments (ISO 17945:2015) |
| EN 14399-1:2015 | High-strength structural bolting assemblies for preloading - Part 1: General requirements |
| EN 14798:2005 | Glass packaging - Hand-held crown bottle openers - Dimensions |
| EN 24498-1 : 1993 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS - MATERIALS OF ESSENTIALLY UNIFORM SECTION HARDNESS |
| EN 3908:2017 | Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| EN ISO 1133:2005 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THE THERMOPLASTICS |
| EN ISO 7093-2 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 2: PRODUCT GRADE C |
| EN ISO 3126:2005 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN 10225:2009 | Weldable structural steels for fixed offshore structures - Technical delivery conditions |
| EN ISO 18556:2016 | Dentistry - Intraoral spatulas (ISO 18556:2016) |
| EN ISO 8752:2009 | Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) |
| EN ISO 4516 : 2002 | METALLIC AND OTHER INORGANIC COATINGS - VICKERS AND KNOOP MICROHARDNESS TESTS |
| EN ISO 7091 : 2000 | PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN 4700-005:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 005: Forging stock |
| EN ISO 16859-2 : 2015 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| EN ISO 7153-1:2016 | Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) |
| EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| EN ISO 10673:2009 | Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:2009) |
| EN 15551:2017 | Railway applications - Railway rolling stock - Buffers |
| EN ISO 5182:2016 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT (ISO 5182:2016) |
| EN 14399-9:2018 | High-strength structural bolting assemblies for preloading - Part 9: System HR or HV - Direct tension indicators for bolt and nut assemblies |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN 23878:1993 | Hardmetals - Vickers hardness test (ISO 3878:1983) |
| EN 16451:2015 | Railway applications - Braking - Brake pad holder |
| EN ISO 14727:1998/AC:1998 | DENTAL IMPLANTS - PREFABRICATED PARTS CONNECTING SUPRASTRUCTURES TO DENTAL IMPLANTS - CONTENTS OF TECHNICAL FILE |
| EN 16602-70-46:2014 | Space product assurance - Requirements for manufacturing and procurement of threaded fasteners |
| EN 4700-003:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 003: Tube |
| EN ISO 15087-1:2001 | Dental elevators - Part 1: General requirements (ISO 15087-1:1999) |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN ISO 19490:2017 | Dentistry - Sinus membrane elevator (ISO 19490:2017) |
| EN ISO 10666 : 1999 | DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES |
| EN ISO 18265:2013 | Metallic materials - Conversion of hardness values (ISO 18265:2013) |
| EN ISO 3887:2018 | Steels - Determination of the depth of decarburization (ISO 3887:2017) |
| EN ISO 7094:2000/AC:2002 | PLAIN WASHERS - EXTRA LARGE SERIES - PRODUCT GRADE C |
| EN 843-4 : 2005 | ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
| EN ISO 1133-1:2011 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| EN ISO 4498:2010 | Sintered metal materials, excluding hardmetals - Determination of apparent hardness and microhardness (ISO 4498:2010) |
| EN ISO 14310:2008 | Petroleum and natural gas industries - Downhole equipment - Packers and bridge plugs (ISO 14310:2008) |
| EN ISO 13628-7:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005) |
| EN ISO 14233:2003 | Dentistry - Polymer-based die materials (ISO 14233:2003) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN ISO 8751:2007 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| EN 657:2005 | Thermal spraying - Terminology, classification |
| EN ISO 1797-3:2013 | Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) |
| EN ISO 10451:2010 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| EN ISO 3650:1998 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - LENGTH STANDARDS - GAUGE BLOCKS |
| EN 1652:1997/AC:2003 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| EN ISO 14917:2017 | Thermal spraying - Terminology, classification (ISO 14917:2017) |
| EN ISO 10669 : 1999 | Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN 1653:1997/A1:2000 | COPPER AND COPPER ALLOYS - PLATE, SHEET AND CIRCLES FOR BOILERS, PRESSURE VESSELS AND HOT WATER STORAGE UNITS |
| EN 4700-007:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 007: Remelting stock |
| EN 14870-3:2006 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
| EN ISO 7090 : 2000 | PLAIN WASHERS, CHAMFERED - NORMAL SERIES - PRODUCT GRADE A (ISO 7090:2000) |
| EN 14436:2004 | Copper and copper alloys - Electrolytically tinned strip |
| EN 818-7:2002+A1:2008 | Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
| EN ISO 7092 : 2000 | PLAIN WASHERS - SMALL SERIES - PRODUCT GRADE A |
| EN ISO 7093-1 : 2000 | PLAIN WASHERS - LARGE SERIES - PART 1: PRODUCT GRADE A (ISO 7093-1:2000) |
| EN 16725:2016 | Railway applications - Track - Restoration and repair of manganese crossings |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN ISO 15732 : 2005 | FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003) |
| EN ISO 16635-2:2014 | Dentistry - Dental rubber dam instruments - Part 2: Clamp forceps(ISO 16635-2:2014) |
| EN ISO 2702:2011 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| EN ISO 19715:2017 | Dentistry - Filling instrument with contra angle (ISO 19715:2017) |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 15098-1:2001 | Dental tweezers - Part 1: General requirements (ISO 15098-1:2000) |
| EN 4677-001:2012 | Aerospace series - Welded and brazed assemblies for aerospace construction - Joints of metallic materials by electron beam welding - Part 001: Quality of welded assemblies |
| EN ISO 8891 : 2000 | DENTAL CASTING ALLOYS WITH NOBLE METAL CONTENT OF AT LEAST 25% BUT LESS THAN 75% |
| EN ISO 8750:2007 | Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) |
| EN 3299:2007 | Aerospace series - Shaft-nuts and threaded rings, self-locking, right- or left-hand MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated - Technical specification |
| EN ISO 14998:2013 | Petroleum and natural gas industries - Downhole equipment - Completion accessories (ISO 14998:2013) |
| EN 14587-3:2012 | Railway applications - Track - Flash butt welding of rails - Part 3: Welding in association with crossing construction |
| EN ISO 13337:2009 | Spring-type straight pins - Slotted, light duty (ISO 13337:2009) |
| EN ISO 1562 : 2004 | DENTISTRY - CASTING GOLD ALLOYS |
| EN ISO 15136-2:2006 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems (ISO 15136-2:2006) |
| EN 14730-1:2017 | Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes |
| EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN 1669:1996 | Aluminium and aluminium alloys - Test methods - Earing test for sheet and strip |
| EN ISO 17509:2016 | Dentistry - Torque transmitter for handpieces (ISO 17509:2016) |
| EN 4700-004:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 004: Wire |
| EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| EN 4700-001:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 001: Plate, sheet and strip |
| EN ISO 13625:2002 | Petroleum and natural gas industries - Drilling and production equipment - Marine drilling riser couplings (ISO 13625:2002) |
| EN ISO 5470-1:2016 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| EN 4700-006:2010 | Aerospace series - Steel and heat resisting alloys - Wrought products - Technical specification - Part 006: Pre-production and production forgings |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| EN 16273:2014 | Railway applications - Track - Forged rail transitions |
| EN ISO 1797-1:2011 | Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011) |
| EN 3380 : 1996 | AEROSPACE SERIES - RINGS, RETAINING - TECHNICAL SPECIFICATION |
| EN ISO 12670:2015 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| EN ISO 898-6 : 1995 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| EN 13892-2 : 2002 | METHODS OF TEST FOR SCREED MATERIALS - PART 2: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH |
| UNE-EN ISO 21672-1:2012 | Dentistry - Periodontal probes - Part 1: General requirements (ISO 21672-1:2012) |
| API 16A : 2017 | SPECIFICATION FOR DRILL-THROUGH EQUIPMENT |
| BS EN 16451:2015 | Railway applications. Braking. Brake pad holder |
| 04/30105010 DC : DRAFT JUL 2004 | ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS ISO 8642:2008 | Aerospace. Self-locking nuts with maximum operating temperature greater than 425 degrees C. Test methods |
| UNI EN ISO 9015-1 : 2011 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 1: HARDNESS TEST ON ARC WELDED JOINTS |
| BS A 295:1985 | Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C |
| ISO 12891-2:2014 | Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants |
| ABMA ISO 13411 : 1998 | AEROSPACE - AIRFRAME NEEDLE ROLLER, CYLINDRICAL ROLLER AND TRACK ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| I.S. EN 50109-2-3:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-3: PARTICULAR REQUIREMENTS FOR CONTACTS OF ELECTRICAL CONNECTORS |
| 13/30263773 DC : 0 | BS ISO 6506-2 - METALLIC MATERIALS - BRINELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
| DIN EN ISO 22068:2014-06 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| 16/30339983 DC : 0 | BS ISO 8535-1 - DIESEL ENGINES - STEEL TUBES FOR HIGH-PRESSURE FUEL INJECTION PIPES - PART 1: REQUIREMENTS FOR SEAMLESS COLD-DRAWN SINGLE-WALL TUBES |
| API SPEC 16C : 2015 | CHOKE AND KILL EQUIPMENT |
| BS EN ISO 16635-1:2014 | Dentistry. Dental rubber dam technique Hole punch |
| 14/30284697 DC : 0 | BS ISO 683-5 - HEAT TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 5: NITRIDING STEELS |
| BS EN 50109-2-3:1996 | Hand crimping tools. Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications. Particular requirements Contacts of electrical connectors |
| I.S. EN 10109-3:1995 | METALLIC MATERIALS - HARDNESS TEST - PART 3: CALIBRATION OF STANDARDIZED BLOCKS TO BE USED FOR ROCKWELL HARDNESS TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| ISO 17744:2004 | Plastics — Determination of specific volume as a function of temperature and pressure (pvT diagram) — Piston apparatus method |
| 15/30303331 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| ISO 18746:2016 | Traditional Chinese medicine — Sterile intradermal acupuncture needles for single use |
| I.S. EN 4700-002:2016 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| PREN ISO 2702 : DRAFT 2009 | HEAT-TREATED STEEL TAPPING SCREWS - MECHANICAL PROPERTIES |
| BS ISO 13628-7 : 2005 AMD 16887 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| 15/30311766 DC : 0 | BS ISO 9015-2 - DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS |
| API SPEC 17J : 2014 | SPECIFICATION FOR UNBONDED FLEXIBLE PIPE |
| DIN EN 15551:2013-05 (Draft) | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS |
| BS 2782-3 Method 370:1990 | Methods of testing plastics. Mechanical properties Determination of resistance to wear by abrasive wheels |
| BS EN 3908:2017 | Aerospace series. Nipples, lubricating, axial type, in corrosion resisting steel, passivated |
| 17/30361675 DC : 0 | BS EN 3299 - AEROSPACE SERIES - SHAFT-NUTS AND THREADED RINGS, SELF-LOCKING, RIGHT- OR LEFT-HAND MJ THREADS, IN HEAT RESISTING STEEL FE-PA2601 (A286), SILVER-PLATED - TECHNICAL SPECIFICATION |
| I.S. EN 4700-003:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 003: TUBE |
| 17/30346735 DC : 0 | BS EN 10225-3 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 3: HOT FINISHED HOLLOW SECTIONS |
| BIS IS 513 : 2008 AMD 2 2016 | COLD REDUCED LOW CARBON STEEL SHEET AND STRIP |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNE-EN ISO 17937:2016 | Dentistry - Osteotome (ISO 17937:2015) |
| DIN ISO 4498 E : 2005 | SINTERED METAL MATERIALS, EXCLUDING HARDMETALS - DETERMINATION OF APPARENT HARDNESS AND MICROHARDNESS |
| 17/30303088 DC : 0 | BS EN ISO 7492 - DENTISTRY - DENTAL EXPLORER |
| DIN EN ISO 16859-2 E : 2016 | METALLIC MATERIALS - LEEB HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF THE TESTING DEVICES (ISO 16859-2:2015) |
| BS ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels Nitriding steels |
| BS EN ISO 17945:2015 | Petroleum, petrochemical and natural gas industries. Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments |
| BS EN ISO 18556:2016 | Dentistry. Intraoral spatulas |
| 13/30280533 DC : 0 | BS ISO 6932 - COLD-REDUCED CARBON STEEL STRIP WITH A MAXIMUM CARBON CONTENT OF 0,25% |
| BS ISO 18203:2016 | Steel. Determination of the thickness of surface-hardened layers |
| 03/306713 DC : DRAFT APR 2003 | EN 657 - THERMAL SPRAYING - TERMINOLOGY, CLASSIFICATION |
| BS EN 4700-007:2010 | Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Remelting stock |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| 09/30194594 DC : 0 | BS ISO 22394 - HARDMETALS - KNOOP HARDNESS TEST |
| DIN EN ISO 17945:2015-08 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - METALLIC MATERIALS RESISTANT TO SULFIDE STRESS CRACKING IN CORROSIVE PETROLEUM REFINING ENVIRONMENTS (ISO 17945:2015) |
| DIN EN 16451 E : 2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| 13/30252112 DC : 0 | BS EN ISO 11970 - SPECIFICATION AND APPROVAL OF WELDING PROCEDURES FOR PRODUCTION WELDING OF STEEL CASTINGS |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| UNE-EN ISO 22068:2014 | Sintered-metal injection-moulded materials - Specifications (ISO 22068:2012) |
| BS EN ISO 1797-3:2013 | Dentistry. Shanks for rotary instruments Shanks made of ceramics |
| ISO 156:1982 | Metallic materials Hardness test Verification of Brinell hardness testing machines |
| BS 3900-E14(1997) : 1997 AMD 16870 | METHODS OF TEST FOR PAINTS - DETERMINATION OF RESISTANCE TO ABRASION (ROTATING ABRASIVE-PAPER-COVERED WHEEL) |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) Length standards Gauge blocks |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| BIS IS 1501-3 : 2013 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 3: CALIBRATION OF REFERENCE BLOCKS |
| 15/30332554 DC : 0 | BS EN 14399-9 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| 15/30291323 DC : 0 | BS EN ISO 1797 - DENTISTRY - SHANKS FOR ROTARY, OSCILLATING AND RECIPROCATING INSTRUMENTS |
| BS ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Strength and quality of materials |
| BS EN ISO 17937:2015 | Dentistry. Osteotome |
| UNE-EN ISO 1133-1:2012 | Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) |
| ABMA ISO 14190 : 1997 | AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION |
| 97/703009 DC : 0 | PREN 10208-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 3: PIPES OF REQUIREMENT CLASS C |
| 17/30335249 DC : 0 | BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
| BS ISO 6932:2014 | Cold-reduced carbon steel strip with a maximum carbon content of 0,25 % |
| BS ISO 5182 : 2008 | RESISTANCE WELDING - MATERIALS FOR ELECTRODES AND ANCILLARY EQUIPMENT |
| BS EN ISO 1797:2017 | Dentistry. Shanks for rotary and oscillating instruments |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS A 363:2000 | Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa. Procurement specification |
| 03/118501 DC : DRAFT NOV 2003 | ISO/DIS 17804 - FOUNDING - AUSFERRITIC SPHEROIDAL GRAPHITE CAST IRONS - CLASSIFICATION |
| AWS D3.6M : 2010 | UNDERWATER WELDING CODE |
| BS 2A 295:2000 | Nuts, self-locking, with maximum operating temperature less than or equal to 425°C. Test methods |
| ISO 9154:2016 | Aerospace — Bolts, with MJ threads, made of heat-resistant nickel-based alloy, strength class 1 550 MPa — Procurement specification |
| ISO/TR 10108:1989 | Steel Conversion of hardness values to tensile strength values |
| DIN EN ISO 12690:2011-04 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| ISO 4498-2:1981 | Sintered metal materials, excluding hardmetals Determination of apparent hardness Part 2: Case-hardened ferrous materials, surface enriched by carbon or carbon and nitrogen |
| I.S. EN ISO 19715:2017 | DENTISTRY - FILLING INSTRUMENT WITH CONTRA ANGLE (ISO 19715:2017) |
| UNE-EN 15594:2010 | Railway applications - Track - Restoration of rails by electric arc welding |
| PREN 4700-007 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 007: REMELTING STOCK |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| PREN 4700-001 : 200P2 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP |
| PREN 4700-002 : 200P3 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 002: BAR AND SECTION |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| ISO 6507-2:2018 | Metallic materials — Vickers hardness test — Part 2: Verification and calibration of testing machines |
| UNI EN 14587-2 : 2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| I.S. EN ISO 1133-1:2011 | PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS - PART 1: STANDARD METHOD (ISO 1133-1:2011) |
| API 16AR : 2017 | STANDARD FOR REPAIR AND REMANUFACTURE OF DRILL-THROUGH EQUIPMENT |
| I.S. EN 16451:2015 | RAILWAY APPLICATIONS - BRAKING - BRAKE PAD HOLDER |
| I.S. EN ISO 6507-2:2018 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2018) |
| I.S. EN ISO 22068:2014 | SINTERED-METAL INJECTION-MOULDED MATERIALS - SPECIFICATIONS (ISO 22068:2012) |
| I.S. EN 15594:2009 | RAILWAY APPLICATIONS - TRACK - RESTORATION OF RAILS BY ELECTRIC ARC WELDING |
| 16/30258490 DC : 0 | BS EN 14587-1 - RAILWAY APPLICATIONS - INFRASTRUCTURE - FLASH BUTT WELDING OF RAILS - PART 1: NEW R220, R260, R260MN, R320CR, R350HT, R370LHT AND R400HT GRADE RAILS IN A FIXED PLANT |
| I.S. EN ISO 15156-3:2015&LC:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H[2]S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION - PART 3: CRACKING-RESISTANT CRAS (CORROSION-RESISTANT ALLOYS) AND OTHER ALLOYS (ISO 15156-3:2015) |
| EN ISO 7492:2018 | Dentistry - Dental explorer (ISO 7492:2018) |
| I.S. EN 4700-004:2010 | AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 004: WIRE |
| ISO 22034-1:2007 | Steel wire and wire products — Part 1: General test methods |
| ISO 9352:2012 | Plastics — Determination of resistance to wear by abrasive wheels |
| ISO 7481:2000 | Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods |
| I.S. EN ISO 9015-2:2016 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| BS EN 14399-9:2009 | High strength structural bolting for preloading System HR or HV. Direct tension indicators for bolt and nut assemblies |
| 17/30359541 DC : 0 | BS EN 12797 - BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS |
| BS EN ISO 14918:1998 | Thermal spraying. Approval testing of thermal sprayers |
| 17/30346732 DC : 0 | BS EN 10225-4 - WELDABLE STRUCTURAL STEELS FOR FIXED OFFSHORE STRUCTURES - TECHNICAL DELIVERY CONDITIONS - PART 4: COLD FORMED WELDED HOLLOW SECTIONS |
| UNI EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| ASTM F 3184 : 2016 | Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion |
| I.S. EN ISO 11961:2008 | PETROLEUM AND NATURAL GAS INDUSTRIES - STEEL DRILL PIPE |
| EN ISO 14457:2017 | Dentistry - Handpieces and motors (ISO 14457:2017) |
| ASTM F 3318 : 2018 | Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam |
| ISO 683-5:2017 | Heat treatable steels, alloy steels and free-cutting steels — Part 5: Nitriding steels |
| EN ISO 14918:1998 | Thermal spraying - Approval testing of thermal sprayers (ISO 14918:1998) |
| EN ISO 9873:2017 | Dentistry - Intra-oral mirrors (ISO 9873:2017) |
| I.S. EN 10088-4:2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| I.S. EN ISO 6507-4:2006 | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 4: TABLES OF HARDNESS VALUES (ISO 6507-4:2018) |
| ISO 683-10:1987 | Heat-treatable steels, alloy steels and free-cutting steels Part 10: Wrought nitriding steels |
| ISO 4960:2007 | Cold-reduced carbon steel strip with a mass fraction of carbon over 0,25 % |
| ISO 8535-2:2003 | Compression-ignition engines Steel tubes for high-pressure fuel injection pipes Part 2: Requirements for composite tubes |
| ISO 14457:2017 | Dentistry — Handpieces and motors |
| I.S. EN 14587-2:2009 | RAILWAY APPLICATIONS - TRACK - FLASH BUTT WELDING OF RAILS - PART 2: NEW R220, R260, R260MN AND R350HT GRADE RAILS BY MOBILE WELDING MACHINES AT SITES OTHER THAN A FIXED PLANT |
| I.S. EN 14399-9:2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 9: SYSTEM HR OR HV - DIRECT TENSION INDICATORS FOR BOLT AND NUT ASSEMBLIES |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 13533:2001/AC:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN ISO 10510:2011-07 | Tapping screw and washer assemblies with plain washers (ISO 10510:2011) |
| DIN EN 772-1:2016-05 | METHODS OF TEST FOR MASONRY UNITS - PART 1: DETERMINATION OF COMPRESSIVE STRENGTH |
| DIN EN ISO 15087-1 E : 2002 | DENTAL ELEVATORS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 10451:2010-11 | Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) |
| DIN EN 14399-1:2015-04 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 10666:2000-02 | Drilling screws with tapping screw thread - Mechanical and functional properties (ISO 10666:1999); German version EN ISO 10666:1999 |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| ISO 17509:2016 | Dentistry Torque transmitter for handpieces |
| ISO 10669:1999 | Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A |
| BS EN ISO 6508-2:2015 | Metallic materials. Rockwell hardness test Verification and calibration of testing machines and indenters |
| ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
| BS EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| UNE-EN ISO 5470-1:2017 | Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) |
| BS EN 10088-2:2014 | Stainless steels Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes |
| BS EN 10003-2:1995 | Metallic materials. Brinell hardness test Verification of Brinell hardness testing machines |
| UNE-EN 12735-1:2016 | Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 1: Tubes for piping systems |
| BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
| BS EN ISO 6507-3:2005 | Metallic materials. Vickers hardness test Calibration of reference blocks |
| BS EN 14798:2005 | Glass packaging. Hand-held crown bottle openers. Dimensions |
| BS EN ISO 1797-1:2011 | Dentistry. Shanks for rotary instruments Shanks made of metals |
| ISO 10510:2011 | Tapping screw and washer assemblies with plain washers |
| ISO 8751:2007 | Spring-type straight pins Coiled, light duty |
| BS EN 843-4:2005 | Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Vickers, Knoop and Rockwell superficial hardness |
| BS EN 13892-2:2002 | Methods of test for screed materials Determination of flexural and compressive strength |
| BS EN 10225:2009 | Weldable structural steels for fixed offshore structures. Technical delivery conditions |
| BS EN 1043-1:1996 | Destructive tests on welds in metallic materials. Hardness testing. Hardness test on arc welded joints |
| ISO 10666:1999 | Drilling screws with tapping screw thread — Mechanical and functional properties |
| BS EN ISO 10510:2011 | Tapping screw and washer assemblies with plain washers |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| BS EN ISO 13533:2002 | Petroleum and natural gas industries. Drilling and production equipment. Drill-through equipment |
| BS EN ISO 18265:2013 | Metallic materials. Conversion of hardness values |
| 01/715268 DC : DRAFT NOV 2001 | BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| 12/30236742 DC : 0 | BS ISO/IEC 80079-36 - EXPLOSIVE ATMOSPHERES - PART 36: NON-ELECTRICAL EQUIPMENT FOR USE IN EXPLOSIVE ATMOSPHERES - BASIC METHODS AND REQUIREMENTS |
| BS EN ISO 16744:2003 | Dentistry. Base metal materials for fixed dental restorations |
| BS EN ISO 13625:2002 | Petroleum and natural gas industries. Drilling and production equipment. Marine drilling riser couplings |
| BS EN 10151:2002 | Stainless steel strip for springs. Technical delivery conditions |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| DIN EN ISO 8748:2007-07 | Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) |
| EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| EN ISO 9015-2:2016 | DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - HARDNESS TESTING - PART 2: MICROHARDNESS TESTING OF WELDED JOINTS (ISO 9015-2:2016) |
| EN 10328:2005 | Iron and steel - Determination of the conventional depth of hardening after surface heating |
| DIN EN ISO 9873:2000-07 | DENTISTRY - INTRA-ORAL MIRRORS (ISO 9873:2017) |
| DIN EN ISO 1562:2004-08 | DENTISTRY - CASTING GOLD ALLOYS |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 12811-3:2002 | Temporary works equipment - Part 3: Load testing |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 50109-2-5:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-5: Particular requirements for the termination of twin-ax cable for databus applications |
| DIN EN ISO 2702:2011-08 | Heat-treated steel tapping screws - Mechanical properties (ISO 2702:2011) |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| EN 1301-1:2008 | Aluminium and aluminium alloys - Drawn wire - Part 1: Technical conditions for inspection and delivery |
| EN 10151:2002 | Stainless steel strip for springs - Technical delivery conditions |
| BS 4425:1988 | Specification for dental casting gold alloys |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| DIN EN 14436:2004-11 | Copper and copper alloys - Electrolytically tinned strip |
| EN 50340:2010 | HYDRAULIC CABLE CUTTING DEVICES - DEVICES TO BE USED ON ELECTRICAL INSTALLATIONS WITH NOMINAL VOLTAGE UP TO AC 30 KV |
| DIN EN ISO 8751:2007-07 | Spring-type straight pins - Coiled, light duty (ISO 8751:2007) |
| EN ISO 12690:2010 | Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities (ISO 12690:2010) |
| DIN EN ISO 898-6:1996-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| DIN EN 843-4:2005-08 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| DIN EN ISO 3126:2005-05 | Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
| DIN EN ISO 4516:2002-10 | Metallic and other inorganic coatings - Vickers and Knoop microhardness tests (ISO 4516:2002) |
| I.S. EN ISO 13533:2002 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - DRILL-THROUGH EQUIPMENT |
| DIN EN 14730-1:2010-12 | RAILWAY APPLICATIONS - TRACK - ALUMINOTHERMIC WELDING OF RAILS - PART 1: APPROVAL OF WELDING PROCESSES |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| DIN EN ISO 13337:2009-10 | SPRING-TYPE STRAIGHT PINS, SLOTTED, LIGHT DUTY |
| UNE-EN 772-1:2011 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| ASME B89.1.9 : 2002 : R2007 | GAGE BLOCKS |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003 : R2007 | GAGE BLOCKS |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2002 | GAGE BLOCKS |
| ASME B89.1.9 : 2002 : INC : ERR 1 : 2003-12 : R2012 | GAGE BLOCKS |
£58.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.