ISO 683-17:2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Heat-treated steels, alloy steels and free-cutting steels — Part 17: Ball and roller bearing steels
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
22-09-2023
Language(s)
English, French
Published date
15-10-2014
ISO 683-17:2014 specifies the technical delivery requirements for five groups of wrought ball and roller bearing steels: through-hardening bearing steels (steels with about 1 % C and 1 % to 2 % Cr), case-hardening bearing steels, induction-hardening bearing steels (unalloyed and alloyed), stainless bearing steels, and high-temperature bearing steels.
| Committee |
ISO/TC 17/SC 4
|
| DevelopmentNote |
Supersedes ISO/DIS 683-17. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
25
|
| ProductNote |
THIS STANDARD ALSO HAVE CORRECTED VERSION FOR FRENCH FOR THE YEAR 2015 .
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| DS EN ISO 683-17 : 2014 | Identical |
| NF EN ISO 683-17 : 2015 | Identical |
| NBN EN ISO 683-17 : 2014 | Identical |
| NEN EN ISO 683-17 : 2014 | Identical |
| NS EN ISO 683-17 : 2014 | Identical |
| I.S. EN ISO 683-17:2014 | Identical |
| PN EN ISO 683-17 : 2015 | Identical |
| UNE-EN ISO 683-17:2015 | Identical |
| SN EN ISO 683-17 : 2014 | Identical |
| UNI EN ISO 683-17 : 2014 | Identical |
| SS-EN ISO 683-17:2014 | Identical |
| IS 17111:2019 | Identical |
| BS EN ISO 683-17:2014 | Identical |
| EN ISO 683-17:2014 | Identical |
| DIN EN ISO 683-17:2015-02 | Identical |
| ONORM EN ISO 683-17 : 2015 | Identical |
| DIN 17230:1980-09 | Similar to |
| BS 970-4:1970 | Similar to |
| SANS 357-17 : 1ED 2005(R2017) | Identical |
| NFA 35 565 : 1994 | Similar to |
| BS ISO 6370-2:2011 | Vitreous and porcelain enamels. Determination of the resistance to abrasion Loss in mass after sub-surface abrasion |
| ISO 13412:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Inch series |
| BS ISO 10792-1:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Metric series |
| 15/30287641 DC : 0 | BS EN ISO 16120-1 - NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS |
| 15/30303331 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| ISO 13414:1997 | Aerospace — Airframe needle roller bearings, single-row, shielded — Inch series |
| 15/30291038 DC : 0 | BS ISO 19291 - TESTING OF LUBRICANTS - TRIBOLOGICAL TEST IN THE TRANSLATORY OSCILLATION APPARATUS - DETERMINATION OF TRIBOLOGICAL QUANTITIES FOR OILS AND GREASES IN THE TRANSLATORY OSCILLATION APPARATUS |
| 07/30162058 DC : 0 | BS ISO 3290-1 - ROLLING BEARING - ROLLING ELEMENTS - PART 1: STEEL BALLS |
| ISO 14197:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, intermediate duty — Inch series |
| ISO 14212:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, extra-light duty — Inch series |
| ABMA ISO 14211 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
| 13/30279057 DC : 0 | BS ISO 683-4 - HEAT-TREATABLE STEELS, ALLOY STEELS AND FREE-CUTTING STEELS - PART 4: FREE-CUTTING STEELS |
| ABMA ISO 14210 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
| ISO 13416:1997 | Aerospace — Airframe needle track roller, yoke type, single-row, sealed — Metric series |
| ASTM A 485 : 2017 : REDLINE | Standard Specification for High Hardenability Antifriction Bearing Steel |
| ABMA ISO 13417 : 1997 | AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - METRIC SERIES |
| ISO 14208:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, intermediate duty — Inch series |
| ABMA ISO 14218 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES |
| ISO 19291:2016 | Lubricants — Determination of tribological quantities for oils and greases — Tribological test in the translatory oscillation apparatus |
| ISO 14193:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, sealed, extended inner ring intermediate duty — Inch series |
| ISO 6370-2:2011 | Vitreous and porcelain enamels Determination of the resistance to abrasion Part 2: Loss in mass after sub-surface abrasion |
| BS EN 14420-5:2013 | Hose fittings with clamp units Threaded connections |
| BS EN 13631-4:2002 | Explosives for civil uses. High explosives Determination of sensitiveness to impact of explosives |
| EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| EN 12080:2017 | Railway applications - Axleboxes - Rolling bearings |
| ABMA ISO 13413 : 1998 | AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, DOUBLE-ROW, SEALED - INCH SERIES |
| ABMA ISO 14221 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, LIGHT DUTY - INCH SERIES |
| ISO 13415:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Inch series |
| ISO 14203:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 8 and 9 — Metric series |
| ASTM A 756 : 2017 : REDLINE | Standard Specification for Stainless Anti-Friction Bearing Steel |
| 15/30304304 DC : 0 | BS EN 12080 - RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| ABMA ISO 14220 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, LIGHT DUTY - INCH SERIES |
| ABMA ISO 14202 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 0 AND 2 - METRIC SERIES |
| BS EN ISO 12156-1:2016 | Diesel fuel. Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Test method |
| ISO 14201:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, diameter series 2 — Metric series |
| ABMA ISO 14209 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, INTERMEDIATE DUTY - INCH SERIES |
| ABMA ISO 14217 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
| ABMA ISO 14206 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, LIGHT DUTY - INCH SERIES |
| ABMA ISO 14216 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, HEAVY DUTY - INCH SERIES |
| ABMA ISO 13416 : 1997 | AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - METRIC SERIES |
| PREN 12080 : DRAFT 2015 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| ISO 14214:1998 | Aerospace — Airframe ball bearings, double-row, rigid, sealed, heavy duty — Inch series |
| ASTM A 295/A295M : 2014 : REDLINE | Standard Specification for High-Carbon Anti-Friction Bearing Steel |
| DIN EN 12080:2015-06 (Draft) | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| BS EN 12080:2017 | Railway applications. Axleboxes. Rolling bearings |
| I.S. EN 14420-5:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| I.S. EN 12080:2017 | RAILWAY APPLICATIONS - AXLEBOXES - ROLLING BEARINGS |
| DIN EN 14420-5:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| DIN 611:2010-05 | Rolling bearings - Summary |
| DIN EN 13763-3:2002-12 | EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 3: DETERMINATION OF SENSITIVENESS TO IMPACT |
| DIN EN 12080:2017-11 | Railway applications - Axleboxes - Rolling bearings |
| BS IEC 62709:2014 | Radiation protection instrumentation. Security screening of humans. Measuring the imaging performance of X-ray systems |
| BS 2000-239(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-239: DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| ABMA ISO 14208 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, INTERMEDIATE DUTY - INCH SERIES |
| ABMA ISO 14201 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, SELF-ALIGNING, DIAMETER SERIES 2 - METRIC SERIES |
| ABMA ISO 14204 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, DIAMETER SERIES 0 - METRIC SERIES |
| ABMA ISO 14213 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES |
| ISO 10792-1:1995 | Aerospace — Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner — Part 1: Metric series |
| BS ISO 19291:2016 | Lubricants. Determination of tribological quantities for oils and greases. Tribological test in the translatory oscillation apparatus |
| ISO 14206:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, light duty — Inch series |
| UNE-EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| DIN EN ISO 16120-1:2017-09 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| 02/121969 DC : DRAFT APR 2002 | ISO/DIS 20623 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF THE EXTREME-PRESSURE AND ANTI-WEAR PROPERTIES OF FLUIDS - FOUR BALL METHOD (EUROPEAN CONDITIONS) |
| BS ISO 10792-2:1995 | Aerospace. Airframe spherical plain bearings in corrosion-resisting steel with self-lubricating liner Inch series |
| 17/30359115 DC : 0 | BS EN ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| BS EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire General requirements |
| DIN ISO 6370-2:2013-08 | Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011) |
| ISO 14194:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, extended inner ring, heavy duty — Inch series |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| PREN 13001-3-4 : DRAFT 2016 | CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| ABMA ISO 14194 : 1998 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, HEAVY DUTY - INCH SERIES |
| ABMA ISO 14193 : 1998 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, EXTENDED INNER RING, INTERMEDIATE DUTY - INCH SERIES |
| ISO 14192:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, shielded, intermediate duty — Metric series |
| ISO 14196:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, plain inner ring, heavy duty — Inch series |
| IEC 62709:2014 | Radiation protection instrumentation - Security screening of humans - Measuring the imaging performance of X-ray systems |
| EN ISO 12156-1:2016 | Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2016) |
| UNI EN 14420-5 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 5: THREADED CONNECTIONS |
| ABMA ISO 14192 : 1998 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SHIELDED, INTERMEDIATE DUTY - METRIC SERIES |
| ABMA ISO 13415 : 1997 | AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, STUD TYPE, SINGLE-ROW, SEALED - INCH SERIES |
| 16/30322061 DC : DRAFT MAR 2016 | BS EN 13001-3-4 - CRANES - GENERAL DESIGN - PART 3-4: LIMIT STATES AND PROOF OF COMPETENCE OF MACHINERY - BEARINGS |
| ABMA/ISO 3290-1 : 2014 | ROLLING BEARINGS - BALLS - PART 1: STEEL BALLS |
| ISO 13417:1997 | Aerospace — Airframe needle track roller, stud type, single-row, sealed — Metric series |
| ASTM A 534 : 2017 : REDLINE | Standard Specification for Carburizing Steels for Anti-Friction Bearings |
| ISO 13413:1997 | Aerospace — Airframe needle track roller, yoke type, double-row, sealed — Inch series |
| ISO 14191:1998 | Aerospace — Airframe spherical roller bearings, single row, self-aligning, diameter series 3 and 4 — Metric series |
| ABMA ISO 14219 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, SELF-ALIGNING, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
| I.S. EN ISO 12156-1:2016 | DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD (ISO 12156-1:2016) |
| ISO 14216:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, sealed, heavy duty — Inch series |
| ISO 12156-1:2016 | Diesel fuel Assessment of lubricity using the high-frequency reciprocating rig (HFRR) Part 1: Test method |
| ISO 14210:1998 | Aerospace — Airframe ball bearings, single-row, rigid, sealed, torque tube design, light duty — Inch series |
| ISO 14195:1998 | Aerospace — Airframe spherical roller bearings, double row, self-aligning, sealed, torque tube design, light duty — Inch series |
| ISO 14211:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, torque tube design, light duty — Inch series |
| ISO 14204:1998 | Aerospace — Airframe ball bearings, double-row, rigid, diameter series 0 — Metric series |
| ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire — Part 1: General requirements |
| UNE-EN 14420-5:2014 | Hose fittings with clamp units - Part 5: Threaded connections |
| BS EN 13763-3:2002 | Explosives for civil uses. Detonators and relays Determination of sensitiveness to impact |
| EN 13763-3 : 2002 | EXPLOSIVES FOR CIVIL USES - DETONATORS AND RELAYS - PART 3: DETERMINATION OF SENSITIVENESS TO IMPACT |
| EN 13631-4 : 2002 | EXPLOSIVES FOR CIVIL USES - HIGH EXPLOSIVES - PART 4: DETERMINATION OF SENSITIVENESS TO IMPACT OF EXPLOSIVES |
| EN 14420-5:2013 | Hose fittings with clamp units - Part 5: Threaded connections |
| I.S. EN ISO 16120-1:2017 | NON-ALLOY STEEL WIRE ROD FOR CONVERSION TO WIRE - PART 1: GENERAL REQUIREMENTS (ISO 16120-1:2017) |
| ABMA ISO 14214 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, SEALED, HEAVY DUTY - INCH SERIES |
| ISO 14209:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, intermediate duty — Inch series |
| ABMA ISO 14207 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, PRECISION, SEALED, LIGHT DUTY - INCH SERIES |
| ABMA ISO 14191 : 1997 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, DIAMETER SERIES 3 AND 4 - METRIC SERIES |
| ABMA ISO 13412 : 1998 | AEROSPACE - AIRFRAME NEEDLE TRACK ROLLER, YOKE TYPE, SINGLE-ROW, SEALED - INCH SERIES |
| ABMA ISO 13414 : 1998 | AEROSPACE - AIRFRAME NEEDLE ROLLER BEARINGS, SINGLE-ROW, SHIELDED - INCH SERIES |
| ABMA ISO 14197 : 1997 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, SINGLE-ROW, SELF-ALIGNING, SEALED, INTERMEDIATE DUTY - INCH SERIES |
| ABMA ISO 14195 : 1998 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, TORQUE TUBE DESIGN, LIGHT DUTY - INCH SERIES |
| ABMA ISO 14212 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, SEALED, TORQUE TUBE DESIGN, EXTRA-LIGHT DUTY - INCH SERIES |
| ABMA ISO 14203 : 1998 | AEROSPACE - AIRFRAME BALL BEARINGS, SINGLE-ROW, RIGID, DIAMETER SERIES 8 AND 9 - METRIC SERIES |
| ISO 683-4:2016 | Heat-treatable steels, alloy steels and free-cutting steels Part 4: Free-cutting steels |
| UNE-EN ISO 16120-1:2017 | Non-alloy steel wire rod for conversion to wire - Part 1: General requirements (ISO 16120-1:2017) |
| ABMA ISO 14196 : 1998 | AEROSPACE - AIRFRAME SPHERICAL ROLLER BEARINGS, DOUBLE-ROW, SELF-ALIGNING, SEALED, PLAIN INNER RING, HEAVY DUTY - INCH SERIES |
| API 2C : 2012 | OFFSHORE PEDESTAL-MOUNTED CRANES |
| ABMA ISO 14215 : 1997 | AEROSPACE - AIRFRAME BALL BEARINGS, DOUBLE-ROW, RIGID, PRECISION, SEALED, HEAVY DUTY - INCH SERIES |
| ISO 14202:1998 | Aerospace — Airframe ball bearings, single-row, rigid, diameter series 0 and 2 — Metric series |
| ISO 14217:1998 | Aerospace — Airframe ball bearings, double-row, self-aligning, precision, sealed, heavy duty — Inch series |
| ISO 14207:1998 | Aerospace — Airframe ball bearings, single-row, rigid, precision, sealed, light duty — Inch series |
| ISO 404:2013 | Steel and steel products — General technical delivery requirements |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| ISO 5949:1983 | Tool steels and bearing steels Micrographic method for assessing the distribution of carbides using reference photomicrographs |
| ISO 6929:2013 | Steel products — Vocabulary |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| SAC GB/T 28417 : 2012 | CARBON BEARING STEEL |
| SAC GB/T 3203 : 1982 | CARBURIZING STEELS FOR BEARING |
| ISO/TS 4949:2016 | Steel names based on letter symbols |
| EN 10027-2:2015 | DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
| ISO/TR 9769:1991 | Steel and iron Review of available methods of analysis |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| ISO 4969:2015 | Steel Etching method for macroscopic examination |
| ISO 16124:2015 | Steel wire rod — Dimensions and tolerances |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 22034-2:2016 | Steel wire and wire products Part 2: Tolerances on wire dimensions |
| ISO 1035-3:1980 | Hot-rolled steel bars — Part 3: Dimensions of flat bars |
| ISO 1035-4:1982 | Hot-rolled steel bars Part 4: Tolerances |
| ISO 3763:1976 | Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions |
| ISO 4948-1:1982 | Steels Classification Part 1: Classification of steels into unalloyed and alloy steels based on chemical composition |
| SAC GB/T 18254 : 2002 | HIGH-CARBON CHROMIUM BEARING STEEL |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 1035-1:1980 | Hot-rolled steel bars — Part 1: Dimensions of round bars |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 1035-2:1980 | Hot-rolled steel bars — Part 2: Dimensions of square bars |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| ISO 4948-2:1981 | Steels Classification Part 2: Classification of unalloyed and alloy steels according to main quality classes and main property or application characteristics |
| SAC GB/T 3086 : 2008 | HIGH CARBON CHROMIUM STAINLESS BEARING STEELS |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| ISO 9443:1991 | Heat-treatable and alloy steels Surface quality classes for hot-rolled round bars and wire rods Technical delivery conditions |
£58.00
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
Hardcopy - English
PDF - English
PDF 3 Users - English
PDF 5 Users - English
PDF 9 Users - English
Hardcopy - French
PDF - French
PDF 3 Users - French
PDF 5 Users - French
PDF 9 Users - French
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.