• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 7539-6:2011

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

14-09-2018

Language(s)

English, French

Published date

10-10-2011

ISO 7539-6:2011 covers procedures for designing, preparing and using precracked specimens for investigating susceptibility to stress corrosion. It gives recommendations for the design, preparation and use of precracked specimens for investigating susceptibility to stress corrosion.

The term "metal" as used in ISO 7539-6:2011 includes alloys.

Because of the need to confine plasticity at the crack tip, precracked specimens are not suitable for the evaluation of thin products, such as sheet or wire, and are generally used for thicker products including plate bar and forgings. They can also be used for parts joined by welding.

Precracked specimens can be loaded with equipment for application of a constant load or can incorporate a device to produce a constant displacement at the loading points. Tests conducted under increasing displacement or increasing load are dealt with in ISO 7539-9.

A particular advantage of precracked specimens is that they allow data to be acquired from which critical defect sizes, above which stress corrosion cracking can occur, can be estimated for components of known geometry subjected to known stresses. They also enable rates of stress corrosion crack propagation to be determined. The latter data can be taken into account when monitoring parts containing defects during service.

DevelopmentNote
DRAFT ISO/DIS 7539-6 is also available for this standard. (08/2017)
DocumentType
Standard
Pages
38
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy
Supersedes

DIN EN ISO 7539-8:2008-08 Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments (ISO 7539-8:2000)
BS ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Safety
06/30148182 DC : DRAFT MAY 2006 ISO 7866 - GAS CYLINDERS REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
05/30042912 DC : DRAFT JAN 2005 PREN 15045 - TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE SEAMLESS ALUMINIUM OR ALUMINIUM ALLOY GAS CYLINDERS FOR PORTABLE CO[2] FIRE EXTINGUISHERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO 15 LITRES
17/30337655 DC : 0 BS ISO 21153 - CORROSION OF METALS AND ALLOYS - MEASUREMENT OF ENVIRONMENTALLY ASSISTED SMALL CRACK GROWTH RATE
BS EN ISO 7866:2012 Gas cylinders. Refillable seamless aluminium alloy gas cylinders. Design, construction and testing
DIN EN ISO 7539-11:2015-03 CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013)
I.S. EN ISO 7539-9:2008 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 9: PREPARATION AND USE OF PRE-CRACKED SPECIMENS FOR TESTS UNDER RISING LOAD OR RISING DISPLACEMENT
I.S. EN 16602-70-37:2014 SPACE PRODUCT ASSURANCE - DETERMINATION OF THE SUSCEPTIBILITY OF METALS TO STRESS-CORROSION CRACKING
UNI EN ISO 7539-9 : 2008 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 9: PREPARATION AND USE OF PRE-CRACKED SPECIMENS FOR TESTS UNDER RISING LOAD OR RISING DISPLACEMENT
ISO 7539-11:2013 Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
UNE-EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
BS EN 12862:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable welded aluminium alloy gas cylinders
EN 1975:1999/A1:2003 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS ALUMINIUM AND ALUMINIUM ALLOY GAS CYLINDERS OF CAPACITY FROM 0.5 LITRE UP TO 150 LITRE
DIN EN ISO 11114-4:2017-09 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
BS EN ISO 7539-9:2008 Corrosion of metals and alloys. Stress corrosion testing Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
DIN EN ISO 7539-11 E : 2015 CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013)
17/30341479 DC : 0 BS ISO 16111 - TRANSPORTABLE GAS STORAGE DEVICES - HYDROGEN ABSORBED IN REVERSIBLE METAL HYDRIDE
BS ISO 7539-11 : 2013 CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING
ISO 9591:2004 Corrosion of aluminium alloys Determination of resistance to stress corrosion cracking
BS 6980-5(1990) : 1990 AMD 1995 STRESS CORROSION TESTING - METHOD FOR THE PREPARATION AND USE OF C-RING SPECIMENS
03/104505 DC : DRAFT FEB 2003 BS ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING METALLIC MATERIALS RESISTANT TO HYDROGEN EMBRITTLEMENT
BS EN 16602-70-37:2014 Space product assurance. Determination of the susceptibility of metals to stress-corrosion cracking
08/30148224 DC : DRAFT FEB 2008 BS ISO 26444 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS FOR GREATER THAN 60 BAR TEST PRESSURE - DESIGN, CONSTRUCTION AND TESTING
DIN EN ISO 7866:2013-01 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
I.S. EN ISO 7539-8:2008 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 8: PREPARATION AND USE OF SPECIMENS TO EVALUATE WELDMENTS
ISO 21601:2013 Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
I.S. EN ISO 11114-4:2017 TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
EN ISO 7866:2012/AC:2014 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012/COR 1:2014)
PD 6493:1991 Guidance on methods for assessing the acceptability of flaws in fusion welded structures
UNE-EN ISO 7539-11:2015 Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
BS ISO 7539-8 : 2000 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PREPARATION AND USE OF SPECIMENS TO EVALUATE WELDMENTS
BS EN ISO 7539-7:2005 Corrosion of metals and alloys. Stress corrosion testing Method for slow strain rate testing
BS ISO 21601:2013 Corrosion of metals and alloys. Guidelines for assessing the significance of stress corrosion cracks detected in service
I.S. EN ISO 7866:2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING (ISO 7866:2012)
UNI EN ISO 7866 : 2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
ISO 16111:2008 Transportable gas storage devices Hydrogen absorbed in reversible metal hydride
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
ISO 20703:2006 Gas cylinders Refillable welded aluminium-alloy cylinders Design, construction and testing
EN 16602-70-37:2014 Space product assurance - Determination of the susceptibility of metals to stress-corrosion cracking
UNI EN ISO 7539-8 : 2008 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 8: PREPARATION AND USE OF SPECIMENS TO EVALUATE WELDMENTS
UNI EN 12862 : 2002 TRANSPORTABLE GAS CYLINDERS - SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE WELDED ALUMINIUM ALLOY GAS CYLINDERS
NF EN ISO 7866 : 2012 GAS CYLINDERS - REFILLABLE SEAMLESS ALUMINIUM ALLOY GAS CYLINDERS - DESIGN, CONSTRUCTION AND TESTING
DIN EN ISO 7539-7:2005-05 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 7: METHOD FOR SLOW STRAIN RATE TESTING
BS EN 16602-70-45:2014 Space product assurance. Mechanical testing of metallic materials
BS EN ISO 7539-8:2008 Corrosion of metals and alloys. Stress corrosion testing Preparation and use of specimens to evaluate weldments
15/30288130 DC : 0 BS EN ISO 11114-4 - TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT
BS ISO 16111:2008 Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
03/314809 DC : DRAFT SEP 2003 EN ISO 13680 - PETROLEUM AND NATURAL GAS INDUSTRIES - CORROSION-RESISTANT ALLOY SEAMLESS TUBES FOR USE AS CASING, TUBING AND COUPLING STOCK - TECHNICAL DELIVERY CONDITIONS
DIN EN ISO 7539-9:2008-08 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003)
11/30219194 DC : 0 BS ISO 7539-11 - CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING
05/30139447 DC : DRAFT SEP 2005 ISO 21601 - GUIDELINES FOR ASSESSING THE SIGNIFICANCE OF STRESS CORROSION CRACKS DETECTED IN SERVICE
11/30219244 DC : DRAFT SEP 2011 BS ISO 21601 - CORROSION OF METALS AND ALLOYS - GUIDELINES FOR ASSESSING THE SIGNIFICANCE OF STRESS CORROSION CRACKS DETECTED IN SERVICE
ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
I.S. EN ISO 7539-11:2014 CORROSION OF METALS AND ALLOYS - STRESS CORROSION CRACKING - PART 11: GUIDELINES FOR TESTING THE RESISTANCE OF METALS AND ALLOYS TO HYDROGEN EMBRITTLEMENT AND HYDROGEN-ASSISTED CRACKING (ISO 7539-11:2013)
SAE J 2579 : 2013 STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES
ISO 7539-7:2005 Corrosion of metals and alloys Stress corrosion testing Part 7: Method for slow strain rate testing
EN ISO 7539-9:2008 Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003)
ISO 7539-8:2000 Corrosion of metals and alloys Stress corrosion testing Part 8: Preparation and use of specimens to evaluate weldments
BS EN 1975:2000 Transportable gas cylinders. Specification for the design and construction of refillable transportable seamless aluminium and aluminium alloy gas cylinders of capacity from 0,5 litre up to 150 litre
BS EN ISO 7539-5:1995 Corrosion of metals and alloys. Stress corrosion testing Method for the preparation and use of C-ring specimens
ISO 7539-5:1989 Corrosion of metals and alloys Stress corrosion testing Part 5: Preparation and use of C-ring specimens
BS EN ISO 11114-4:2005 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents Test methods for selecting metallic materials resistant to hydrogen embrittlement
ISO 11114-4:2017 Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement
BS EN 14638-1:2006 Transportable gas cylinders. Refillable welded receptacles of a capacity not exceeding 150 litres Welded austenitic stainless steel cylinders made to a design justified by experimental methods
ISO 7866:2012 Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
UNE-ISO 16110-1:2015 Hydrogen generators using fuel processing technologies -- Part 1: Safety
ISO 7539-9:2003 Corrosion of metals and alloys Stress corrosion testing Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
UNE-EN ISO 7866:2013 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012)
EN ISO 7539-11:2014 Corrosion of metals and alloys - Stress corrosion testing - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013)
EN 14638-1:2006 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
EN ISO 11114-4:2017 Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017)
EN ISO 7539-7 : 2005 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 7: METHOD FOR SLOW STRAIN RATE TESTING (ISO 7539-7:2005)
EN ISO 7539-5 : 1995 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 5: PREPARATION AND USE OF C-RING SPECIMENS (ISO 7539-5:1989)
EN ISO 7539-8:2008 Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments (ISO 7539-8:2000)
EN ISO 7539-4 : 1995 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 4: PREPARATION AND USE OF UNIAXIALLY LOADED TENSION SPECIMENS
EN 16602-70-45:2014 Space product assurance - Mechanical testing of metallic materials
03/116565 DC : DRAFT OCT 2003 ISO 20703 - GAS CYLINDERS - REFILLABLE WELDED ALUMINIUM ALLOY - DESIGN, CONSTRUCTION AND TESTING
BS ISO 20703:2006 Gas cylinders. Refillable welded aluminium-alloy cylinders. Design, construction and testing
BS EN ISO 7539-11:2014 Corrosion of metals and alloys. Stress corrosion cracking Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
I.S. EN ISO 7539-7:2005 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 7: METHOD FOR SLOW STRAIN RATE TESTING
BS ISO 7539-9 : 2003 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 9: PREPARATION AND USE OF PRE-CRACKED SPECIMENS FOR TESTS UNDER RISING LOAD OR RISING DISPLACEMENT
I.S. EN 16602-70-45:2014 SPACE PRODUCT ASSURANCE - MECHANICAL TESTING OF METALLIC MATERIALS
DIN EN ISO 11114-4:2015-08 (Draft) TRANSPORTABLE GAS CYLINDERS - COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS - PART 4: TEST METHODS FOR SELECTING STEELS RESISTANT TO HYDROGEN EMBRITTLEMENT (ISO 11114-4:2017)
ONORM EN ISO 7539-9 : 2008 CORROSION OF METALS AND ALLOYS - STRESS CORROSION TESTING - PART 9: PREPARATION AND USE OF PRE-CRACKED SPECIMENS FOR TESTS UNDER RISING LOAD OR RISING DISPLACEMENT
DIN EN 14638-1:2006-07 Transportable gas cylinders - Refillable welded receptacles of a capacity not exceeding 150 litres - Part 1: Welded austenitic stainless steel cylinders made to a design justified by experimental methods
ASME STP-PT-017 : 2008 PROPERTIES FOR COMPOSITE MATERIALS IN HYDROGEN SERVICE

ISO 7539-1:2012 Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
ISO 11782-2:1998 Corrosion of metals and alloys Corrosion fatigue testing Part 2: Crack propagation testing using precracked specimens

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.