• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 760:1978

Current
Current

The latest, up-to-date edition.

Determination of water Karl Fischer method (General method)
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English, French

Published date

01-12-1978

Two methods of titration depending on whether the end point is detected visually or electrometrically are specified. The visual method is only applicable to colourless solutions but can be used when no electrometric apparatus is available. The electrometric method, whether by direct titration or back-titration, is the more accurate one and for this reason recommended. The principle of the test consists in reaction of any water present in a test portion with a solution of iodine and sulphur dioxide in a pyridine/methanol mixture (Karl Fischer reagent), previously standardized by titration with an exactly known mass of water.

DocumentType
Standard
Pages
12
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
BS 2511:1970 Similar to
PN ISO 760 : 2001 Identical
SS-ISO 760 : 1993 Identical
NBN T 02 201 : 1979 Identical
UNE 55525:1990 Identical
BS 684-2.1:1976 Similar to

BS 576-2:1988 Acetic acid for industrial use Methods of test for acetic acid
BS 509-2:1984 Acetone for industrial use Methods of test
SAE AMS 2980/4 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 4 - PURCHASING SPECIFICATION - RESIN
BS 684-2.1:1976 Methods of analysis of fats and fatty oils. Other methods. Determination of water by the Karl Fischer method
BS ISO 15512 : 1999 AMD 14837 PLASTICS - DETERMINATION OF WATER CONTENT
ISO 4020:2001 Road vehicles — Fuel filters for diesel engines — Test methods
BS ISO 12922 : 99 AMD 13874 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
DIN EN 16682 E : 2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
ISO 4020-1:1979 Road vehicles — Fuel filters for automotive compression ignition engines — Part 1: Test methods
BS 4993-5:1980 Methods of test for aluminium fluoride for industrial use Determination of moisture content (Karl Fischer method)
DD ISO/TS 11365:2011 Petroleum and related products. Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
BS ISO 4020:2001 Road vehicles. Fuel filters for diesel engines.Test methods
07/30144836 DC : 0 EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT
12/30259884 DC : 0 BS EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
DIN EN 15692:2009-08 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
BS ISO 14900:2017 Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
EN ISO 3452-2:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
BS 3900-A24(2000) : 2000 AMD 13286 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A24: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A GAS CHROMATOGRAPHIC METHOD
04/30126883 DC : DRAFT DEC 2004 ISO 4437 - BURIED POLYETHYLENE (PE) PIPES FOR THE SUPPLY OF GASEOUS FUELS - METRIC SERIES - SPECIFICATIONS
EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
SAE AMS 2950/1 : 2008 PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
I.S. EN 61221:2004 PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS
ISO 1388-1:1981 Ethanol for industrial use — Methods of test — Part 1: General
ISO 17494:2001 Aromatic extracts, flavouring and perfuming compounds Determination of ethanol content Gas chromatographic method on packed and capillary columns
ISO 4317:2011 Surface-active agents and detergents — Determination of water content — Karl Fischer methods
UNI EN 1555-1 : 2011 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
ISO 14900:2017 Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number
DIN EN 14998 E : 2005 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: FLUXING OILS - SPECIFICATIONS AND TEST METHODS
DIN EN ISO 4491-3:2006-06 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
DIN EN 12201-1:2011-11 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
UNE-EN 16245-2:2014 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
BS EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage. Polyethylene (PE) General
BS EN 14998:2005 Derivatives from coal pyrolysis. Coal tar based oils: fluxings oils. Specifications and test methods
BS EN ISO 3452-2:2013 Non-destructive testing. Penetrant testing Testing of penetrant materials
EN ISO 12922:2012 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
BS EN ISO 9369:1997 Plastics. Basic materials for polyurethanes. Pure isocyanates. Analysis of isocyanate groups
BS EN ISO 12922:2012 Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
BS EN 1555-1:2010 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
BS EN 13991:2003 Derivatives from coal pyrolysis. Coal tar based oils. Creosotes. Specifications and test methods
EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
DIN EN 15536:2007-06 Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
DIN EN 13244-1:2003-04 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES, DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - PART 1: GENERAL
EN 13244-1:2002 Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Part 1: General
EN 1019:2005 Chemicals used for treatment of water intended for human consumption - Sulfur dioxide
DIN EN ISO 15512:2017-03 PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
EN 12123:2012 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
DIN EN 14998:2005-04 Derivatives from coal pyrolysis - Coal tar based oils: fluxing oils - Specifications and test methods
DIN EN ISO 3672-2:2002-07 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
10/30227632 DC : 0 BS ISO 4317 - SURFACE-ACTIVE AGENTS AND DETERGENTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD
05/30098184 DC : DRAFT MAY 2005 ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
BS 5050-9(1980) : 1980 METHODS OF TEST FOR CRYOLITE - DETERMINATION OF MOISTURE CONTENT (KARL FISHER METHOD)
BS EN ISO 14446:2010 Binders for paints and varnishes. Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
BS ISO 17322:2015 Fertilizers and soil conditioners. Analytical methods for Sulfur Coated Urea (SCU)
BS ISO 8068:2006 Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
BS ISO 11021:1999 Essential oils. Determination of water content. Karl Fischer method
ISO/TS 16332:2006 Diesel engines Fuel filters Method for evaluating fuel/water separation efficiency
11/30239977 DC : 0 BS EN 16245-2 - FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: ADDITIONAL REQUIREMENTS FOR RESINS, CURING SYSTEMS, ADDITIVES AND MODIFIERS
I.S. EN 13244-1:2002 PLASTICS PIPING SYSTEMS FOR BURIED AND ABOVE-GROUND PRESSURE SYSTEMS FOR WATER FOR GENERAL PURPOSES DRAINAGE AND SEWERAGE - POLYETHYLENE (PE) - GENERAL
DIN EN 16245-2:2013-08 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
93/708490 DC : 0 PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION
BS ISO 2596:2006 Iron ores. Determination of hygroscopic moisture in analytical samples. Gravimetric, Karl Fischer and mass-loss methods
12/30258200 DC : 0 BS EN 12123 - CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
PD CEN/TR 14548:2003 Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
PREN ISO 15512 : DRAFT 2013 PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013)
PREN 12123 : DRAFT 2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
08/30178054 DC : DRAFT FEB 2008 BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
BS EN 61221:2004 Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications
UNE-EN ISO 15494:2016 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
ISO 8068:2006 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
BS ISO 12492:2012 Rubber, raw. Determination of water content by Karl Fischer method
04/30098945 DC : DRAFT OCT 2004 EN ISO 3452-2 - NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
BS EN ISO 15494:2015 Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
SAE AMS 2980/1 : 2014 CARBON FIBER FABRIC AND EPOXY RESIN WET LAY-UP REPAIR MATERIAL - PART 1 - GENERAL REQUIREMENTS
PREN 3840 : 200P2 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
EN ISO 15512:2016 Plastics - Determination of water content (ISO 15512:2016)
ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) — Part 1: General
NF EN ISO 14446 : 2011 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
NF ISO 10050 : 2006 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS OF TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD)
I.S. EN ISO 15512:2016 PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
I.S. EN 15692:2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
DIN EN ISO 12922:2013-04 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
DIN EN 15536 E : 2007 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: WASH OILS - SPECIFICATIONS AND TEST METHODS
BS EN ISO 10082:2000 Plastics. Phenolic resins. Classification and test methods
ISO 5381:1983 Starch hydrolysis products Determination of water content Modified Karl Fischer method
UNE-EN ISO 11890-2:2013 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2013)
BS EN ISO 11890-1:2007 Paints and varnishes. Determination of volatile organic compound (VOC) content Difference method
BS EN 15536:2007 Derivatives from coal pyrolysis. Coal tar based oils. Wash oils. Specifications and test methods
BS EN 14156:2003 Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods
EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
I.S. EN ISO 3452-2:2013 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS (ISO 3452-2:2013)
I.S. EN 1019:2005 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - SULPHUR DIOXIDE
I.S. EN 12201-1:2011 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
I.S. EN ISO 11890-1:2007 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
I.S. EN 1555-1:2010-2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
ONORM EN ISO 11890-2 : 2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
I.S. EN 12123:2012 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
ONORM EN 12123 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
I.S. EN 3840:2007 AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION
ISO 17322:2015 Fertilizers and soil conditioners Analytical methods for Sulfur Coated Urea (SCU)
BS ISO 10050:2005 Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
UNI EN 15692 : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
PREN 1279-4 : DRAFT 2015 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS
06/30154367 DC : DRAFT AUG 2006 EN 15536 - DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS, WASH OILS - SPECIFICATIONS AND TEST METHODS
12/30256736 DC : 0 BS ISO 4437-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
03/303313 DC : DRAFT APR 2003 EN 14639 - CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
08/30191143 DC : 0 BS EN 1555-1 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
BS ISO 3672-2 : 2000 AMD 13326 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN ISO 14446:2011-02 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
BS 3900-A23(2000) : 2000 AMD 13285 METHODS OF TEST FOR PAINTS - GROUP A: TESTS ON LIQUID PAINTS (EXCLUDING CHEMICAL TESTS) - PART A 23: QUANTITATIVE DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT BY A DIFFERENCE METHOD
16/30323482 DC : 0 BS ISO 11365 - PETROLEUM AND RELATED PRODUCTS - MAINTENANCE AND USE GUIDE FOR TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS
BS ISO 4437-1:2014 Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) General
ISO 15494:2015 Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
ISO 11500:2008 Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
EN 15692:2009 Ethanol as a blending component for petrol - Determination of water content - Karl Fischer potentiometric titration method
I.S. EN 16245-2:2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
ISO 11365:2017 Petroleum and related products — Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
UNE-EN ISO 14446:2011 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
ISO/TS 11365:2011 Petroleum and related products Guidance for the maintenance and use of triaryl phosphate ester turbine-control fluids
EN 1279-2:2002 Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
ISO 20492-1:2008 Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests
UNE-EN ISO 3452-2:2014 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
DIN EN ISO 3672-2 E : 2002 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
DIN EN 1555-1:2010-12 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
DIN EN 1019:2005-08 Chemicals used for treatment of water intended for human consumption - Sulfur dioxide
DIN EN 14639 E : 2005 CRUDE TAR AND CRUDE BENZOLE - CHARACTERISTICS AND TEST METHODS
DIN EN ISO 11890-1:2007-09 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
DIN EN 12123:2013-02 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
DIN EN ISO 3452-2:2014-03 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013)
BS EN ISO 5381:1994 Starch hydrolysis products. Determination of water content. Modified Karl Fischer method
BS EN 12201-1:2011 Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE) General
UNI EN ISO 12922 : 2013 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU
I.S. EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
UNI EN ISO 11890-2 : 2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD
EN 14998:2005 Derivatives from coal pyrolysis - Coal tar based oils: fluxings oils - Specifications and test methods
EN 14156:2003 Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods
EN 16245-2:2013 Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 2: Specific requirements for resin, curing systems, additives and modifiers
UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN 16245-2 : 2013 FIBRE-REINFORCED PLASTIC COMPOSITES - DECLARATION OF RAW MATERIAL CHARACTERISTICS - PART 2: SPECIFIC REQUIREMENTS FOR RESIN, CURING SYSTEMS, ADDITIVES AND MODIFIERS
UNI EN 12123 : 2013 CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION - AMMONIUM SULFATE
UNI EN 12201-1 : 2012 PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
ONORM EN 16028 : 2013 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
13/30265463 DC : 0 BS ISO 17197 - DIMETHYL ETHER (DME) FOR FUELS - DETERMINATION OF WATER CONTENT - KARL FISCHER TITRATION METHOD
13/30212494 DC : 0 BS EN ISO 15494 - PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES
10/30212144 DC : 0 BS EN 12201-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY, AND FOR DRAINAGE AND SEWERAGE UNDER PRESSURE - POLYETHYLENE (PE) - PART 1: GENERAL
ISO 5787:1979 Methyl chloride and ethyl chloride for industrial use — Methods of test
PREN ISO 15494 : DRAFT 2013 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE) AND POLYPROPYLENE (PP) - SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM - METRIC SERIES (ISO/DIS 15494:2013)
ISO 11021:1999 Essential oils Determination of water content Karl Fischer method
UNI EN ISO 14446 : 2011 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
BS EN 16245-2:2013 Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
BS 6782-11(1999) : 1999 BINDERS FOR PAINTS - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND THEIR CLASSIFICATION
BS ISO 11500:2008 Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
09/30207718 DC : 0 BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE
03/300973 DC : DRAFT JAN 2003 ISO 6488 - TOBACCO AND TOBACCO PRODUCTS - DETERMINATION OF WATER CONTENT - KARL FISCHER METHOD
BS ISO 17197:2014 Dimethyl ether (DME) for fuels. Determination of water content. Karl Fischer titration method
BS EN 16682:2017 Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
13/30266500 DC : 0 BS EN ISO 15512 - PLASTICS - DETERMINATION OF WATER CONTENT (ISO/DIS 15512:2013)
BS EN ISO 15512:2016 Plastics. Determination of water content
DIN ISO 4491-3:1998-07 METALLIC POWDERS - DETERMINATION OF OXYGEN CONTENT BY REDUCTION METHODS - PART 3: HYDROGEN-REDUCIBLE OXYGEN
I.S. EN ISO 15494:2015 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
ISO 6191:1981 Light olefins for industrial use Determination of traces of water Karl Fischer method
BS EN 60464-2:2001 Varnishes used for electrical insulation Methods of test
I.S. EN ISO 14446:2010 BINDERS FOR PAINTS AND VARNISHES - DETERMINATION OF THE VISCOSITY OF INDUSTRIAL CELLULOSE NITRATE SOLUTIONS AND CLASSIFICATION OF SUCH SOLUTIONS
UNE-EN ISO 15512:2017 Plastics - Determination of water content (ISO 15512:2016)
I.S. CEN TR 14548:2003 ADHESIVES - GUIDE TO TEST METHODS AND OTHER STANDARDS FOR THE GENERAL REQUIREMENTS, CHARACTERIZATION AND SAFETY OF STRUCTURAL ADHESIVES
ISO 15512:2016 Plastics Determination of water content
DIN EN 16682:2016-01 (Draft) CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
I.S. EN 16682:2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
15/30319712 DC : 0 BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS
ISO 2596:2006 Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
BS EN 1279-2:2002 Glass in building. Insulating glass units Long term test method and requirements for moisture penetration
DIN EN ISO 15494:2016-03 PLASTICS PIPING SYSTEMS FOR INDUSTRIAL APPLICATIONS - POLYBUTENE (PB), POLYETHYLENE (PE), POLYETHYLENE OF RAISED TEMPERATURE RESISTANCE (PE-RT), CROSSLINKED POLYETHYLENE (PE-X), POLYPROPYLENE (PP) - METRIC SERIES FOR SPECIFICATIONS FOR COMPONENTS AND THE SYSTEM (ISO 15494:2015)
SAE AMS 2950/1 : 2008(R2019) PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS
BIS IS 16029 : 2012 ROASTED GROUND COFFEE - DETERMINATION OF MOISTURE CONTENT - KARL FISCHER METHOD (REFERENCE METHOD)
ISO 10050:2005 Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)
I.S. EN 1279-2:2002 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
BS EN ISO 10101-1:1998 Natural gas. Determination of water by the Karl Fischer method Introduction
UNE-EN ISO 12922:2013 Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012)
UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content
BS EN 14639:2005 Crude tar and crude benzole. Characteristics and test methods
ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
BS EN 1019:2005 Chemicals used for treatment of water intended for human consumption. Sulfur dioxide
BS EN ISO 3672-2:2001 Plastics. Unsaturated-polyester resins (UP-R) Preparation of test specimens and determination of properties
BS EN ISO 11890-2:2013 Paints and varnishes. Determination of volatile organic compound (VOC) content Gas-chromatographic method
BS EN 14155:2003 Derivatives from coal pyrolysis. Carbon black feedstock. Specifications and test methods
ISO 9369:1997 Plastics Basic materials for polyurethanes Pure isocyanates Analysis of isocyanate groups
UNE-EN 1555-1:2011 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General
IEC 60464-2:2001+AMD1:2006 CSV Varnishes used for electrical insulation - Part 2: Methods of test
I.S. EN ISO 12922:2012 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012)
ISO 4491-3:1997 Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen
IEC 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications
ISO 3672-2:2000 Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties
BS EN ISO 7327:1997 Plastics. Hardeners and accelerators for epoxide resins. Determination of free acid in acid anhydride
ISO 7327:1994 Plastics Hardeners and accelerators for epoxide resins Determination of free acid in acid anhydride
BS EN 12123:2012 Chemicals used for treatment of water intended for human consumption. Ammonium sulfate
UNE-EN 12123:2013 Chemicals used for treatment of water intended for human consumption - Ammonium sulfate
ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
BS EN ISO 4491-3:2006 Metallic powders. Determination of oxygen content by reduction methods Hydrogen-reducible oxygen
ISO 14446:1999 Binders for paints and varnishes — Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions
EN ISO 7327 : 1997 PLASTICS - HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE
EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
EN 16682:2017 Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage
EN ISO 3672-2 : 2001 PLASTICS - UNSATURATED-POLYESTER RESINS (UP-R) - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES
EN ISO 4491-3 : 2006 Metallic powders - Determination of oxygen content by reduction methods - Part 3: Hydrogen-reducible oxygen (ISO 4491-3:1997)
EN 3840:2007 Aerospace series - Paints and varnishes - Technical specification
EN ISO 960 : 1997 PLASTICS - POLYAMIDES (PA) - DETERMINATION OF WATER CONTENT
EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
EN ISO 5381:1994 Starch hydrolysis products - Determination of water content - Modified Karl Fischer method (ISO 5381:1983)
EN 14155:2003 Derivatives from coal pyrolysis - Carbon black feedstock - Specifications and test methods
EN 14639:2005 Crude tar and crude benzole - Characteristics and test methods
EN 13991:2003 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: CREOSOTES - SPECIFICATIONS AND TEST METHODS
EN ISO 9369 : 1997 PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS
EN ISO 14446:2010 Binders for paints and varnishes - Determination of the viscosity of industrial cellulose nitrate solutions and classification of such solutions (ISO 14446:1999)
EN 15536:2007 Derivatives from coal pyrolysis - Coal tar based oils: wash oils - Specifications and test methods
DIN EN 16028 E : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
BS ISO 7745:2010 Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use
DIN EN 15692 E : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
BS ISO 18237:2017 Hydraulic fluid power. Method for evaluating water separation performance of dehydrators
BS 2782-4.433E(1996) : AMD 9699 METHODS OF TESTING PLASTICS - CHEMICAL PROPERTIES - DETERMINATION OF FREE ACID IN ACID ANHYDRIDE FOR HARDENERS AND ACCELERATORS IN EPOXIDE RESINS
BS ISO 11365:2017 Petroleum and related products. Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids
I.S. EN ISO 9369:1997 PLASTICS - BASIC MATERIALS FOR POLYURETHANES - PURE ISOCYANATES - ANALYSIS OF ISOCYANATE GROUPS
NF ISO 28641 : 2010 RUBBER COMPOUNDING INGREDIENTS - ORGANIC CHEMICALS - GENERAL TEST METHODS
DIN EN 3840:2007-10 Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007
13/30253060 DC : 0 BS ISO 17322 - FERTILIZERS AND SOIL CONDITIONERS - SULFUR COATED UREA (SCU) - ANALYTICAL METHODS
16/30268528 DC : 0 BS ISO 18237 - HYDRAULIC FLUID POWER - METHOD FOR EVALUATING WATER SEPARATION PERFORMANCE OF DEHYDRATORS
07/30164620 DC : 0 BS EN 15692 - ETHANOL AS A BLENDING COMPONENT FOR GASOLINE - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
BS ISO 28641:2010 Rubber compounding ingredients. Organic chemicals. General test methods
BS EN 3840:2007 Aerospace series. Paints and varnishes. Technical specification
BS EN 15692:2009 Ethanol as a blending component for petrol. Determination of water content. Karl Fischer potentiometric titration method
05/30046519 DC : 0 ISO 2596 - IRON ORES - DETERMINATION OF HYGROSCOPIC MOISTURE IN ANALYTICAL SAMPLES - GRAVIMETRIC, KARL FISCHER AND MASS-LOSS METHODS
NF EN 16682 : 2017 CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE
NF ISO 8068 : 2006 LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES
ISO 7745:2010 Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use
EN ISO 15494:2015 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)
ISO 11817:1994 Roasted ground coffee Determination of moisture content Karl Fischer method (Reference method)
ISO 12492:2012 Rubber, raw — Determination of water content by Karl Fischer method
NF EN 1279-2 : 2003 GLASS IN BUILDING - INSULATING GLASS UNITS - PART 2: LONG TERM TEST METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION
DIN EN ISO 15512:2016-06 (Draft) PLASTICS - DETERMINATION OF WATER CONTENT (ISO 15512:2016)
BS 2000-572(2009) : 2009 ETHANOL AS A BLENDING COMPONENT FOR PETROL - DETERMINATION OF WATER CONTENT - KARL FISCHER POTENTIOMETRIC TITRATION METHOD
ISO 10933:1997 Polyethylene (PE) valves for gas distribution systems
ISO 12922:2012 Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU
UNE-EN 12201-1:2012 Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General
ISO 3452-2:2013 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
BS EN ISO 960:1998 Plastics. Polyamides (PA). Determination of water content
ONORM EN 1555-1 : 2015 PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL
CEN/TR 14548:2003 Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
DIN EN 14156:2003-11 DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: COAL TAR FUEL - SPECIFICATIONS AND TEST METHODS
DIN EN 14155:2003-11 DERIVATIVES FROM COAL PYROLYSIS - CARBON BLACK FEEDSTOCK - SPECIFICATIONS AND TEST METHODS
EN 60464-2:2001/A1:2006 VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
DIN EN 14639:2005-11 Crude tar and crude benzole - Characteristics and test methods; German version EN 14639:2005
UNI EN ISO 3452-2 : 2014 NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 2: TESTING OF PENETRANT MATERIALS
EN 61221:2004 Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications

UNE-EN ISO 15494:2019 Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) - Metric series for specifications for components and the system (ISO 15494:2015)

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.