ISO 80000-4:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Quantities and units Part 4: Mechanics
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
01-08-2019
English, French, Russian
17-03-2006
ISO 80000-4:2006 specifies the names, symbols and definitions for quantities and units of classical mechanics. Where appropriate, conversion factors are also given.
DevelopmentNote |
Supersedes ISO 31-3 (03/2006) DRAFT ISO/DIS 80000-4 is also available for this standard. (08/2016)
|
DocumentType |
Standard
|
Pages |
24
|
ProductNote |
THIS STANDARD HAVE CORRECT VERSION FOR FR-2006
|
PublisherName |
International Organization for Standardization
|
Status |
Withdrawn
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ONORM EN ISO 80000-4 : 2014 | Identical |
JIS Z 8000-4:2014 | Identical |
NF EN ISO 80000-4 : 2013 | Identical |
NBN EN ISO 80000-4 : 2013 | Identical |
NEN EN ISO 80000-4 : 2013 | Identical |
NS EN ISO 80000-4 : 2013 | Identical |
I.S. EN ISO 80000-4:2013 | Identical |
PN EN ISO 80000-4 : 2013 | Identical |
SN EN ISO 80000-4 : 2013 | Identical |
UNI CEI EN ISO 80000-4 : 2013 | Identical |
ÖNORM EN ISO 80000-4: 2020 01 15 | Identical |
BIS IS/ISO 80000-4 : 2006 | Identical |
UNE-EN ISO 80000-4:2014 | Identical |
BS EN ISO 80000-4:2013 | Identical |
CEI UNI EN ISO 80000-4 : 1ED 2013 | Identical |
EN ISO 80000-4:2013 | Identical |
DIN EN ISO 80000-4:2013-08 | Identical |
DIN EN ISO 80000-4 E : 2013 | Identical |
CEI UNI ISO 80000-4 : 2010 | Identical |
NEN ISO 80000-4 : 2006 | Identical |
NF ISO 80000-4 : 2006 | Identical |
SANS 80000-4 : 1ED 2017 | Identical |
BS ISO 80000-4 : 2006 | Identical |
PN ISO 80000-4 : 2010 | Identical |
DIN ISO 21360-1 E : 2016 | VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
DIN ISO 21360-1:2016-09 | VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
10/30214897 DC : 0 | BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
15/30283700 DC : 0 | BS EN ISO 80000-12 - QUANTITIES AND UNITS - PART 12: CONDENSED MATTER PHYSICS |
17/30330389 DC : 0 | BS EN ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
DIN EN ISO 11372:2012-03 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
I.S. EN ISO 11810-2:2009 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
ISO 80000-7:2008 | Quantities and units Part 7: Light |
CEI UNI EN 80000-6 : 2009 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
DIN EN ISO 10961:2012-06 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
UNI CEI ISO 80000-12 : 2010 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
BS EN ISO 10961:2012 | Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
PREN 764-1 : DRAFT 2013 | PRESSURE EQUIPMENT - PART 1: VOCABULARY |
DIN EN ISO 80000-11 E : 2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
07/30126396 DC : DRAFT AUG 2007 | BS ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
16/30297082 DC : 0 | BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
BS EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement |
UNE-EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
12/30240396 DC : 0 | BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS |
DIN EN ISO 80000-12 E : 2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
UNI EN ISO 10462 : 2014 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
DIN EN ISO 80000-9:2013-08 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
I.S. EN ISO 13088:2012 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
I.S. EN 14531-6:2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 19634:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols |
ISO 21010:2017 | Cryogenic vessels — Gas/material compatibility |
BS EN ISO 13088:2012 | Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection |
API 11D2 : 2010 | PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
CEN/TR 13233 : 2007 COR 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
I.S. EN ISO 13769:2009 | GAS CYLINDERS - STAMP MARKING |
BIS IS/ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNI CEI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
EN ISO 8536-4:2013/A1:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013) |
DIN EN ISO 80000-8:2008-01 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
DIN EN ISO 12213-3:2010-01 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
BS EN ISO 80000-8:2007 | Quantities and units Acoustics |
BS EN ISO 12213-3:2009 | Natural gas. Calculation of compression factor Calculation using physical properties |
BS EN 13802:2013 | Railway applications. Suspension components. Hydraulic dampers |
UNE-EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
EN ISO 10462:2013 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
DIN EN ISO 4375:2015-03 | HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
EN 80000-14:2009 | Quantities and units - Part 14: Telebiometrics related to human physiology |
EN ISO 1628-1:2009/A1:2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009/AMD 1:2012) |
EN 80000-6:2008 | Quantities and units - Part 6: Electromagnetism |
BS ISO 21360-1:2012 | Vacuum technology. Standard methods for measuring vacuum-pump performance General description |
CEI UNI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
06/30160058 DC : 0 | BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
12/30243456 DC : DRAFT MAR 2012 | BS ISO 16249 - SPRINGS - SYMBOLS |
DIN EN ISO 3807 E : 2015 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING (ISO 3807:2013, CORRECTED VERSION 2014-11-01) |
DIN EN ISO 80000-10:2016-09 (Draft) | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
BS EN ISO 80000-11:2013 | Quantities and units Characteristic numbers |
UNI CEI EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF EN 14531-6 : 2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 80000-9 : 2009 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI CEN/TR 14473 : 2014 | TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
BS ISO 13088 : 2011 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
15/30280941 DC : 0 | BS EN ISO 24431 - GAS CYLINDERS - CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING |
16/30337558 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
BS ISO 24431:2006 | Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling |
CEI UNI ISO 80000-7 : 2009 | QUANTITIES AND UNITS - PART 7: LIGHT |
BS EN 14531-6:2009 | Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking Step by step calculations for train sets or single vehicles |
PREN 14531-2 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 10961 : 2010 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
BS EN ISO 8536-13:2016 | Infusion equipment for medical use Graduated flow regulators for single use with fluid contact |
OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BS ISO 18437-4:2008 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
NF EN 80000-14 : 2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
BS EN ISO 24431:2016 | Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling |
13/30274227 DC : 0 | BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY |
UNI EN ISO 11810-2 : 2009 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
UNI EN 4500-001 : 2014 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
07/30126405 DC : DRAFT DEC 2007 | ISO 80000-12 - QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
BS EN ISO 3807:2013 | Gas cylinders. Acetylene cylinders. Basic requirements and type testing |
16/30301546 DC : 0 | BS ISO 19634 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - NOTATIONS AND SYMBOLS |
BS ISO 17089-1:2019 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
BS ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
UNI EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES |
BS EN ISO 17078-3:2009 | Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
07/30126402 DC : 0 | BS ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
PREN 14531-1 : DRAFT 2012 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 13769:2007 | Gas cylinders Stamp marking |
UNI CEI ISO 80000-9 : 2010 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
EN 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
BS EN ISO 13769:2009 | Gas cylinders. Stamp marking |
ISO 19613:2018 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer |
I.S. EN ISO 8536-13:2016 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 13: GRADUATED FLOW REGULATORS FOR SINGLE USE WITH FLUID CONTACT (ISO 8536-13:2016) |
ISO 12242:2012 | Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
I.S. EN ISO 10462:2013 | GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE (ISO 10462:2013) |
EN ISO 13769:2009 | Gas cylinders - Stamp marking (ISO 13769:2007) |
BS EN ISO 80000-10:2013 | Quantities and units Atomic and nuclear physics |
UNI EN ISO 17078-3 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
EN ISO 10961:2012 | Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
UNE-EN ISO 8536-4:2013 | Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
I.S. EN ISO 15136-1:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
CEN/TR 14473:2014 | Transportable gas cylinders - Porous materials for acetylene cylinders |
I.S. EN ISO 4375:2014 | HYDROMETRIC - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
I.S. EN ISO 12213-2:2009 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
I.S. EN ISO 1628-1:2009 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
I.S. EN ISO 12213-3:2009 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
DIN EN ISO 11810-2:2009-07 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
I.S. EN ISO 10297:2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
I.S. EN 13802:2013 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
I.S. EN ISO 11810:2015 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
I.S. EN 764-2:2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
DIN EN 764-2:2012-04 | Pressure equipment - Part 2: Quantities, symbols and units |
UNE-EN ISO 24431:2017 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
BIS IS/IEC 80000-6 : 2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
12/30246381 DC : 0 | BS EN ISO 3807 - GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
NF ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI CEI EN ISO 80000-12 : 2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
17/30334065 DC : 0 | BS EN ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
DIN EN ISO 80000-12:2015-11 (Draft) | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
16/30299127 DC : DRAFT MAR 2016 | BS EN ISO 13769 - GAS CYLINDERS - STAMP MARKING |
UNI EN ISO 10961 : 2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
UNI CEI EN ISO 80000-11 : 2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
12/30263252 DC : 0 | BS EN 14531-1 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
UNE-EN ISO 11372:2012 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
DIN EN ISO 17871:2015-12 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
BS EN 4500-001:2012 | Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
BS ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI EN ISO 11372 : 2012 | GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION |
12/30245682 DC : 0 | BS EN ISO 10462 - GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
ISO 3898:2013 | Bases for design of structures — Names and symbols of physical quantities and generic quantities |
BS ISO 16249:2013 | Springs. Symbols |
BS EN ISO 11372:2011 | Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection |
UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
BIS IS/ISO 80000-11 : 2008 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
07/30156919 DC : DRAFT AUG 2007 | BS EN 14531-6 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 6: HIGH SPEED TRAINS |
ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
PD CEN/TR 13233:2007 | Advanced technical ceramics. Notations and symbols |
UNE-EN 14531-6:2010 | Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
BIS IS/ISO 80000-9 : 2009 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
BS EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
DIN EN ISO 1183-1:2013-04 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
DIN EN ISO 24431 E : 2017 | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
ISO 20475:2018 | Gas cylinders — Cylinder bundles — Periodic inspection and testing |
I.S. EN ISO 80000-5:2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007) |
UNI CEI ISO 80000-10 : 2010 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
S.R. CEN/TR 14473:2014 | TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
I.S. EN ISO 11372:2011 | GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION (ISO 11372:2011) |
BS EN ISO 80000-5:2013 | Quantities and units Thermodynamics |
BS EN ISO 80000-12:2013 | Quantities and units Solid state physics |
I.S. EN 62884-1:2017 | MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
UNE-EN ISO 13088:2013 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
EN 14531-1:2015 | Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
ISO 17089-1:2010 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
IEC 60050-212:2010 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
ISO 17871:2015 | Gas cylinders Quick-release cylinder valves Specification and type testing |
I.S. EN ISO 17078-3:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
DIN EN ISO 1628-1:2012-10 | Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
UNI EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
UNE-EN ISO 4375:2015 | Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
EN ISO 80000-11:2013 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
UNE-EN ISO 10462:2014 | Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
EN ISO 13088:2012 | Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
UNI CEI EN ISO 80000-8 : 2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
EN ISO 12213-3:2009 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
EN ISO 24431:2016 | Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 12213-3 : 2010 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
UNI EN 13802 : 2014 | RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
UNI EN ISO 12213-2 : 2010 | NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
UNI EN 764-2 : 2012 | PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
BS ISO 19634:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols |
UNI EN ISO 1183-1 : 2013 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD |
BIS IS/ISO 80000-5 : 2007 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
DIN EN ISO 80000-5 E : 2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
UNI CEI ISO 80000-11 : 2009 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
DIN EN ISO 80000-11:2013-08 | Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
UNE-EN ISO 80000-9:2014 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
06/30126364 DC : 0 | IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
UNE-EN ISO 8536-13:2017 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
BS EN 80000-6:2008 | Quantities and units Electromagnetism |
13/30243616 DC : 0 | BS EN ISO 4375 - HYDROMETRIC DETERMINATIONS - CABLEWAY SYSTEMS FOR STREAM GAUGING |
ONORM EN ISO 1628-1 : 2012 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009 + AMD 1:2012) |
BS ISO 22967:2010 | Forced draught gas burners |
BS EN 80000-14:2009 | Quantities and units Telebiometrics related to human physiology |
06/30126386 DC : DRAFT AUG 2006 | IEC 80000-6 - QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
BS ISO 9928-1:2015 | Cranes. Crane operating manual General |
IEEE/ASTM SI 10-2016 | American National Standard for Metric Practice |
BS ISO 80000-11 : 2008 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
ISO 21360-1:2012 | Vacuum technology Standard methods for measuring vacuum-pump performance Part 1: General description |
I.S. EN ISO 80000-12:2013 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
BS ISO 17089-1:2010 | Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
NF EN 80000-6 : 2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
BIS IS/ISO 80000-12 : 2009 | QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
DIN EN ISO 13088 E : 2013 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
UNI CEI EN ISO 80000-5 : 2013 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
UNI CEI EN ISO 80000-10 : 2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNE-EN ISO 80000-12:2014 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
API 19G3 : 2011 | RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
I.S. EN ISO 80000-10:2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
DIN EN ISO 80000-5:2016-02 (Draft) | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
UNI EN 14531-6 : 2009 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
UNI EN ISO 13088 : 2012 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
I.S. EN ISO 10961:2012 | GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
EN ISO 17871:2015 | Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015) |
ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
DIN EN 14531-1:2016-05 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
DIN EN ISO 13769:2016-05 (Draft) | GAS CYLINDERS - STAMP MARKING |
CEI UNI EN ISO 80000-8 : 2010 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
BS EN ISO 1183-1:2012 | Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method |
BS EN ISO 10462:2013 | Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance |
ISO 17089-2:2012 | Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
I.S. EN ISO 1183-1:2012 | PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
IEC 62884-1:2017 | Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
I.S. EN ISO 8536-4:2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
BS EN ISO 8536-4 : 2013 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
DIN EN 13802:2014-03 | Railway applications - Suspension components - Hydraulic dampers |
DIN EN ISO 8536-4:2013-07 | INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
I.S. EN ISO 80000-8:2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
ISO 24431:2016 | Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling |
EN ISO 80000-8 : 2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
BS EN ISO 17871 : 2015 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
BS EN ISO 4375:2014 | Hydrometry. Cableway systems for stream gauging |
UNE-EN ISO 10297:2015 | Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
IEC 80000-6:2008 | Quantities and units - Part 6: Electromagnetism |
ISO 8536-13:2016 | Infusion equipment for medical use Part 13: Graduated flow regulators for single use with fluid contact |
UNE-CEN/TR 14473:2014 IN | Transportable gas cylinders - Porous materials for acetylene cylinders |
UNE-EN 13802:2014 | Railway applications - Suspension components - Hydraulic dampers |
ISO 12213-3:2006 | Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
ISO 80000-5:2007 | Quantities and units Part 5: Thermodynamics |
ISO 12213-2:2006 | Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
IEC 80000-14:2008 | Quantities and units - Part 14: Telebiometrics related to human physiology |
ISO 11372:2011 | Gas cylinders — Acetylene cylinders — Filling conditions and filling inspection |
ISO 10462:2013 | Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance |
BS EN ISO 1628-1 : 2009 | PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
ISO 15136-1:2009 | Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ISO 80000-12:2009 | Quantities and units Part 12: Solid state physics |
ISO 8536-4:2010 | Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
ISO 80000-10:2009 | Quantities and units Part 10: Atomic and nuclear physics |
ISO 1628-1:2009 | Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
UNE-EN ISO 12213-2:2010 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
BS EN 764-2:2012 | Pressure equipment Quantities, symbols and units |
ISO 11810-2:2007 | Lasers and laser-related equipment Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Part 2: Secondary ignition |
UNE-EN ISO 12213-3:2010 | Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
ISO 17078-3:2009 | Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN ISO 10297 : 2014 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
ISO 80000-9:2009 | Quantities and units Part 9: Physical chemistry and molecular physics |
ISO 80000-8:2007 | Quantities and units Part 8: Acoustics |
ISO 80000-11:2008 | Quantities and units Part 11: Characteristic numbers |
UNE-EN ISO 3807:2014 | Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2013-11-15) |
BS EN ISO 11810-2:2009 | Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Secondary ignition |
ISO 10961:2010 | Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
ISO 13088:2011 | Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection |
EN ISO 8536-13:2016 | Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
EN ISO 4375:2014 | Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
EN ISO 80000-12:2013 | Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
EN ISO 11810-2:2009 | Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007) |
EN ISO 17078-3:2009 | Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN ISO 15136-1:2009 | Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
EN ISO 80000-9:2013 | Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
EN ISO 10297:2014/A1:2017 | GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017) |
EN ISO 80000-5:2013 | Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) |
EN ISO 11810:2015 | Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) |
EN 4500-001:2012 | Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
EN 13802:2013 | Railway applications - Suspension components - Hydraulic dampers |
EN ISO 12213-2:2009 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
EN 14531-6:2009 | Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
DIN EN ISO 80000-9 E : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
UNE-EN 80000-14:2011 | Quantities and units - Part 14: Telebiometrics related to human physiology |
16/30343594 DC : 0 | BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
BIS IS/ISO 80000-7 : 2008 | QUANTITIES AND UNITS - PART 7: LIGHT |
I.S. EN 80000-6:2008 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
I.S. EN ISO 80000-11:2013 | QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
12/30250646 DC : 0 | BS EN 14531-2 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 22967:2010 | Forced draught gas burners |
DIN EN 14531-6:2009-12 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 12242:2012 | Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
BS ISO 80000-10 : 2009 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
08/30126399 DC : DRAFT MAY 2008 | BS ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
PD CEN/TR 14473:2014 | Transportable gas cylinders. Porous materials for acetylene cylinders |
UNE-IEC 60050-212:2011 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
DIN EN ISO 17871 E : 2015 | GAS CYLINDERS - QUICKRELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
BS ISO 18437-1:2012 | Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
DIN EN ISO 13088:2013-01 | GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
DIN EN ISO 3807:2015-02 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
17/30361469 DC : 0 | BS EN ISO 80000-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS |
07/30126390 DC : 0 | BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT |
16/30300291 DC : 0 | BS ISO 19613 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT OF VISCOSITY OF CERAMIC SLURRY BY USE OF A ROTATIONAL VISCOMETER |
BIS IS/IEC 80000-14 : 2008 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
I.S. EN 14531-1:2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
DD CEN/TR 13233 : 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
UNI CEI ISO 80000-5 : 2009 | QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
16/30339669 DC : 0 | BS ISO 21010 - CRYOGENIC VESSELS - GAS/MATERIALS COMPATIBILITY |
UNI CEI EN ISO 4375 : 2015 | HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING |
BIS IS/ISO 80000-8 : 2007 | QUANTITIES AND UNITS - PART 8: ACOUSTICS |
API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
ISO 9928-1:2015 | Cranes Crane operating manual Part 1: General |
08/30126370 DC : DRAFT APR 2008 | BS ISO 80000-1 - QUANTITIES AND UNITS - PART 1: GENERAL |
UNI CEI EN ISO 80000-9 : 2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI EN ISO 13769 : 2009 | GAS CYLINDERS - STAMP MARKING |
DIN EN ISO 80000-10 E : 2013 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
I.S. EN ISO 3807:2013 | GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING (ISO 3807:2013, CORRECTED VERSION 2013-11-15) |
BS EN 14531-1 : 2015 | RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
PREN 4500-001 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
UNE-EN ISO 80000-10:2013 | Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
I.S. EN ISO 80000-9:2013 | QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
I.S. EN ISO 24431:2016 | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
ISO 16249:2013 | Springs — Symbols |
I.S. EN ISO 17871:2015 | GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
ISO 18437-4:2008 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
UNE-EN ISO 1183-1:2013 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
UNI CEI EN 80000-6 : 2009 | QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
I.S. EN 4500-001:2012 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
I.S. EN 80000-14:2009 | QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
BS ISO 80000-7:2008 | Quantities and units Light |
DIN EN ISO 24431:2015-08 (Draft) | GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
S.R. CEN TR 13233:2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
ISO 18437-1:2012 | Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
EN ISO 17078-2:2007/AC:2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
DIN EN ISO 12213-2:2010-01 | Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
ISO 4375:2014 | Hydrometry Cableway systems for stream gauging |
BS EN ISO 11810:2015 | Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition |
14/30262701 DC : 0 | BS EN ISO 17871 - GAS CYLINDERS - QUICK OPENING VALVES - SPECIFICATION AND TYPE TESTING |
BS EN ISO 15136-1:2001 | Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
ISO 3807:2013 | Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
BS EN ISO 12213-2:2009 | Natural gas. Calculation of compression factor Calculation using molar-composition analysis |
ISO 11810:2015 | Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Primary ignition, penetration, flame spread and secondary ignition |
DIN EN ISO 80000-10:2013-08 | QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
EN ISO 11372:2011 | Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
DIN EN ISO 11810:2016-06 | LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
DIN SPEC 4002-102:2011-05 | PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |
ISO 31-11:1992 | Quantities and units Part 11: Mathematical signs and symbols for use in the physical sciences and technology |
ISO 80000-3:2006 | Quantities and units Part 3: Space and time |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.