ISO 9003:1994

Withdrawn

View Superseded by

Quality systems Model for quality assurance in final inspection and test

Amended by

ISO 9003:1994/Cor 1:1994

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

08-03-2019

Language(s)

English, French

Published date

30-06-1994

Publisher

International Organization for Standardization

DevelopmentNote	CORRIGENDUM 1 + 2 ONLY APPLY TO THE FRENCH VERSION. For the year 2000 revision, ISO 9001 will replace ISO 9001, 9002 and 9003 in the 1994 version. ISO 9000 is being developed in parallel with ISO 9001 and 9004. ISO 9004 will be used to go beyond Quality Management requirements. 31.8.99 ISO/FDIS 9000, ISO/FDIS 9001, ISO/FDIS 9004, Final Draft Available September 2000.
DocumentType	Standard
Pages	7
PublisherName	International Organization for Standardization
Status	Withdrawn
SupersededBy	ISO 9001:2000 ISO 9001:2015
Supersedes	ISO 9003:1987 NS 5803 : 1981

Standards	Relationship
BS EN ISO 9003:1994	Identical
NBN EN ISO 9003 : 1994	Identical
UNE-EN ISO 9003:1994	Identical
AS/NZS ISO 9001-3:1994 (Lam)	Identical
UNI EN ISO 9003 : 1994	Identical
CSA ISO 9003 : 94(R2000)	Identical
NEN EN ISO 9003 : 1994	Identical
I.S. EN ISO 9003:1994	Identical
DIN ISO 9003:1990-05	Identical
AS 3903-1987	Identical
GOST R ISO 9003 : 1996	Identical
BIS IS/ISO 9003 : 1994(R2000)	Identical
NS EN ISO 9003 : 1ED 94	Identical
NFX 50 133 : LATEST	Identical
AS/NZS ISO 9003:1994	Identical
EN ISO 9003:1994/AC:1997	Identical
SN EN ISO 9003 : 94 AC 97	Identical
NF EN ISO 9003 : 1994	Identical
DIN EN ISO 9003:1994-08	Identical
DIN EN ISO 9003 E : 1994	Identical
UNE 66903:1989	Identical
BS 5750-3:1987	Identical
CSA Q9003 : 1991	Identical

SAE AS 7103 : 2007	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) REQUIREMENTS FOR ACCREDITATION OF PASS THROUGH DISTRIBUTORS
DIN V ENV 61400-1 : 1996	WIND TURBINE GENERATOR SYSTEMS - PART 1: SAFETY REQUIREMENTS
BS IEC 61334-1.2 : 1997	DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS - GENERAL CONSIDERATIONS - GUIDE FOR SPECIFICATION
13/30277457 DC : 0	BS EN 1776 - GAS INFRASTRUCTURE - GAS MEASURING SYSTEMS - FUNCTIONAL REQUIREMENTS
BS EN 60746-1:2003	Expression of performance of electrochemical analyzers General
BS ISO 9000-2:1997	Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
DIN ISO 13411:1996-12 (Draft)	AEROSPACE - AIRFRAME ROLLING BEARINGS - NEEDLE ROLLER, NEEDLE TRACK ROLLER AND CYLINDRICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION
DD ENV 61112:2002	Blankets of insulating material for electrical purposes
03/304152 DC : DRAFT MAR 2003	IEC 61850-10 ED.1.0 - COMMUNICATION NETWORKS AND SYSTEMS IN SUBSTATIONS - PART 10: CONFORMANCE TESTING
07/30162629 DC : 0	BS ISO 4642-1 - RUBBER AND PLASTICS HOSES, NON-COLLAPSIBLE, FOR FIRE-FIGHTING SERVICE - PART 1: SEMI-RIGID HOSES FOR FIXED SYSTEMS
BS ISO 14964:2000	Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration
I.S. ISO 9000-2:1994	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003
API 683 : 1993	QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES
PD 6538:1993	Vision 2000. A strategy for international standards\' implementation in the quality arena during the 1990s
CEI EN 61897 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
DEFSTAN 05-93/1(1991) : 1991	QUALITY SYSTEM REQUIREMENTS FOR FINAL INSPECTION AND TEST
CSA E432.2 : 1998 : INC : UPD 1 : 1998 : R2012	SAFETY SPECIFICATIONS FOR INCANDESCENT LAMPS - TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
DEFSTAN 05-93/2(1995) : 1995	QUALITY SYSTEM REQUIREMENTS FOR FINAL INSPECTION AND TEST (ADOPTION OF ISO 9003 - 1994 WITH SUPPLEMENTARY REQUIREMENTS)
CSA C62155 : 2006 : R2015	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
CSA C1325 : 1999 : R2016	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
DIN ISO 9000-2 : DRAFT 92	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003
ISO 9000-2:1997	Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
IEEE/ISO/IEC 14764-2006	ISO/IEC/IEEE International Standard for Software Engineering - Software Life Cycle Processes - Maintenance
CEI EN 60746-1 : 2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
I.S. EN 61479:2001	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
I.S. CLC/TS 61112:2006	BLANKETS OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
ISO 3999-1:2000	Radiation protection Apparatus for industrial gamma radiography Part 1: Specifications for performance, design and tests
BS ISO/IEC 14764:2006	Software engineering. Software life cycle processes. Maintenance
CSA ISO 10012-1 : 0	QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - PART 1: METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT
I.S. ISO 9004-3:1994	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS
BS EN 1826:1997	Biotechnology. Large-scale process and production. Control procedures for raw materials
BS EN 12094-7:2001	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for nozzles for CO2 systems
ISO/IEC Guide 62:1996	General requirements for bodies operating assessment and certification/registration of quality systems
BS EN 12306:1998	Biotechnology. Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
BS EN 866-1:1997	Biological systems for testing sterilizers and sterilization processes General requirements
BS EN ISO 14111:1999	Natural gas. Guidelines to traceability in analysis
BS EN 12094-13:2001	Fixed firefighting systems. Components for gas extinguishing systems Requirements and test methods for check valves and non-return valves
EN 61479:2001/A1:2002	LIVE WORKING - FLEXIBLE CONDUCTOR COVERS (LINE HOSES) OF INSULATING MATERIAL
EN 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
CEN ISO/TR 13881:2011	Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000)
EN 12306:1997	Biotechnology - Guidance for quality control of diagnostic kits used in agriculture, plant and animal pest and disease control and environmental contamination
EN 12195-2:2000	Load restraint assemblies on road vehicles - Safety - Part 2: Web lashing made from man-made fibres
EN 12094-7:2000/A1:2005	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 7: REQUIREMENTS AND TEST METHODS FOR NOZZLES FOR CO[2] SYSTEMS
EN 61284:1997	Overhead lines - Requirements and tests for fittings
EN 60746-1:2003	Expression of performance of electrochemical analyzers - Part 1: General
EN 12094-13:2001/AC:2002	FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR GAS EXTINGUISHING SYSTEMS - PART 13: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES AND NON-RETURN VALVES
EN 12075:1997	Biotechnology - Large-scale process and production - Procedures for fermentation and downstream processes
EN 61229:1995/A2:2002	RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
DEFSTAN 23-6/3(2000) : 2000	GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT
BS ISO 10955:1999	End-fittings and turnbarrels for aircraft control wire rope. Technical specification
BS PD ISO/TR 13881 : 2001	PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES
BS 5750-14:1993	Quality systems Guide to dependability programme management
BS EN 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1000 V
BS 4778-1:1987	Quality vocabulary International terms
BS W 14:1999	Aircraft control wire rope assemblies. Technical specification
CEI EN 62155 : 2004	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
ISO 9000-1:1994	Quality management and quality assurance standards — Part 1: Guidelines for selection and use
DD ENV ISO 14907-1:2001	Road transport and traffic telematics (RTTT). Electronic fee collection (EFC). Test procedures for user and fixed equipment Description of test procedures
BS EN 61479:2001	Live working. Flexible conductor covers (line hoses) of insulating material
DD ENV 61111:2002	Matting of insulating material for electrical purposes
CSA C62155:2006	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
BS EN 61229:1996	Rigid protective covers for live working on a.c. installations
BS IEC 61111:1992	Matting of insulating material for electrical purposes
SAE AS 7001 : 2017	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM DESCRIPTION
CEI EN 61284 : 1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
BS EN 61264:1999	Ceramic pressurized hollow insulators for high-voltage switchgear and controlgear
CEI EN 61325 : 1998	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
CEI EN 61854 : 2000	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
I.S. EN 61897:1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR STOCKBRIDGE TYPE AEOLIAN VIBRATION DAMPERS
ISO 9139:1998	Aerospace — Nuts, plain or slotted (castellated) — Procurement specification
ISO 9002:1994	Quality systems — Model for quality assurance in production, installation and servicing
CEI UNI EN 46003 : 2001	QUALITY SYSTEMS - MEDICAL DEVICES - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9003
CSA ISO 10012-2 : 0	QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES
CSA C61400-2:2008	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
ISO/IEC Guide 25:1990	General requirements for the competence of calibration and testing laboratories
SAE AS 7200/1 : 2017	NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) - AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM
ASTM E 2066 : 2000	Standard Guide for Validation of Laboratory Information Management Systems
CSA ISO 10011-1 : 1994	GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING
ASTM E 1884 : 1997	Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004)
ISO 9004-1:1994	Quality management and quality system elements Part 1: Guidelines
I.S. EN 62155:2003	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
ISO/TR 13352:1997	Guidelines for interpretation of ISO 9000 series for application within the iron ore industry
DIN EN 12279:2005-12	GAS SUPPLY SYSTEMS - GAS PRESSURE REGULATING INSTALLATIONS ON SERVICE LINES - FUNCTIONAL REQUIREMENTS
DIN EN 12890 : 2002-05	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
ISO 10472-1:1997	Safety requirements for industrial laundry machinery Part 1: Common requirements
EN 61854:1998	Overhead lines - Requirements and tests for spacers
I.S. EN ISO 10472-1:2008	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
DIN EN 12890:2000-06	FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES
I.S. EN ISO 10007:1997	QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT
ASME B16.5 : 2017	PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
DIN EN 61284 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
BS 7011-2.2:1998	Consumable accessories for light microscopes. Slides Specification for materials and quality of finish
VDE 0212-1 : 1998	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR FITTINGS
ISO 13411:1997	Aerospace — Airframe needle roller, cylindrical roller and track roller bearings — Technical specification
ISO/IEC 14764:2006	Software Engineering Software Life Cycle Processes Maintenance
93/408219 DC : MAR 93	BS 5781 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT. PART 2: MEASUREMENT PROCESS CONTROL
BS 5750-8:1991	Quality systems Guide to quality management and quality systems elements for services
97/703020 DC : 0	ISO/DIS 3999 - APPARATUS FOR INDUSTRIAL GAMMA RADIOGRAPHY - DESIGN AND TEST CRITERIA
BS EN 60746-2:2003	Expression of performance of electrochemical analyzers pH value
04/30110333 DC : DRAFT MAR 2004	EN 14889-2 - FIBRES FOR CONCRETE - PART 2: POLYMER FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY
PD CEN ISO/TR 13881:2011	Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
DD ENV 61400-1:1995	Wind turbine generator systems Safety requirements
CSA ISO 9000-4 : 0	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDE TO DEPENDABILITY PROGRAMME MANAGEMENT
04/30112025 DC : DRAFT APR 2004	ISO 16010 - ELASTOMERIC SEALS - MATERIAL REQUIREMENTS FOR SEALS USED IN PIPES AND FITTINGS CARRYING GAS AND HYDROCARBON FLUIDS
CLC/TS 61111:2006	Matting of insulating material for electrical purposes
I.S. ISO 10011-1:1991	GUIDELINES FOR AUDITING QUALITY SYSTEMS - PART 1: AUDITING
BS EN 60383-1:1998	Insulators for overhead lines with a nominal voltage above 1000 V Ceramic or glass insulator units for a.c. systems. Definitions, test methods and acceptance criteria
02/121978 DC : DRAFT APR 2002	ISO/DIS 23711 - ELASTOMERIC SEALS - REQUIREMENTS FOR MATERIALS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - THERMOPLASTIC ELASTOMERS
SAE AS 7104 : 2007	NADCAP REQUIREMENTS FOR ACCREDITATION OF FULL DISTRIBUTORS
CAN/CSA-E432-2-98 (R2017)	Safety Specifications for Incandescent Lamps - Part 2: Tungsten Halogen Lamps for Domestic and Similar General Lighting Purposes (adopted IEC 432-2:1994, first edition, including Amendment 1:1996 and Amendment 2:1997, with Canadian deviations) \| Prescriptions de sécurité pour lampes à incandescence - Partie 2: Lampes tungstène-halogène pour usage domestique et éclairage général similaire (norme CEI 432-2:1994 adoptée, première édition, avec l\'amendement 1:1996 and l\'amendement 2:1997, avec exigences propres au Canada)
I.S. CLC/TS 61111:2006	MATTING OF INSULATING MATERIAL FOR ELECTRICAL PURPOSES
BS 7520:1995	Guide to quality assurance plans for tools for live working
CSA C61400-2 : 2008 : R2013	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
CSA N286.1 : 0	PROCUREMENT QUALITY ASSURANCE FOR NUCLEAR POWER PLANTS
I.S. EN 61854:1999	OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS
BS ISO 10290:1993	Textiles. Cotton yarns. Specifications
NF EN 50207 : 2004	RAILWAY APPLICATIONS - ELECTRONIC POWER CONVERTERS FOR ROLLING STOCK
BS EN 30011-1:1993	Guidelines for auditing quality systems Guidelines for auditing quality systems. Auditing
DEFSTAN 05-62(PT20)/1(1990) : 1990	GUIDANCE ON QUALITY ASSURANCE PROCEDURES - PART 20: ARRANGEMENTS FOR GOVERNMENT QUALITY ASSURANCE BETWEEN SWITZERLAND AND THE UNITED KINGDOM
ISO 16010:2005	Elastomeric seals Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
I.S. EN 61207-3:2002	GAS ANALYZERS - EXPRESSION OF PERFORMANCE - PARAMAGNETIC OXYGEN ANALYZERS
ISO 9000-4:1993	Quality management and quality assurance standards — Part 4: Guide to dependability programme management
DIN EN ISO 10472-1:2009-10	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
BS EN 681-4:2000	Elastomeric seals. Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
I.S. EN 12569:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
EN 12569:1999/AC:2000	INDUSTRIAL VALVES - VALVES FOR CHEMICAL AND PETROCHEMICAL PROCESS INDUSTRY - REQUIREMENTS AND TESTS
PD 3542:1991	The role of standards in company quality management
UNI EN ISO 10472-1 : 2009	SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY - PART 1: COMMON REQUIREMENTS
ASTM E 2066 : 2000 : R2007	Standard Guide for Validation of Laboratory Information Management Systems (Withdrawn 2015)
07/30043552 DC : 0	BS 5385-4 - WALL AND FLOOR TILING - PART 4: DESIGN AND INSTALLATION OF CERAMIC AND MOSAIC TILING IN SPECIAL CONDITIONS - CODE OF PRACTICE
MIL-B-45451 Revision B:1961	BENITE STRANDS
CEI EN 60746-2 : 2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE
I.S. ISO 10013:1995	GUIDELINES FOR DEVELOPING QUALITY MANUALS
BS EN 61284:1998	Overhead lines. Requirements and tests for fittings
PREN 45001 : DRAFT 1997	GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
BS 5750-0.1(1987) : 1987	QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO SELECTION AND USE
CEI EN 50103 : 1996	GUIDANCE ON THE APPLICATION OF EN 29001 AND EN 46001 AND OF EN 29002 AND EN 46002 FOR THE ACTIVE (INCLUDING ACTIVE IMPLANTABLE) MEDICAL DEVICE INDUSTRY
04/30110330 DC : DRAFT MAR 2004	EN 14889-1 - FIBRES FOR CONCRETE - PART 1: STEEL FIBRES - DEFINITION, SPECIFICATIONS AND CONFORMITY
BS EN 46003:1999	Quality systems. Medical devices. Particular requirements for the application of EN ISO 9003
ISO 14190:1998	Aerospace — Airframe rolling bearings: ball and spherical roller bearings — Technical specification
BS A 342:1999	Nuts, plain or slotted (castellated). Procurement specification
BS EN ISO 9000-1:1994	Quality management and quality assurance standards Guidelines for selection and use
CSA ISO 9004-2 : 0	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES
IEC TR 61334-1-2:1997	Distribution automation using distribution line carrier systems - Part 1-2: General considerations - Guide for specification
I.S. EN 60746-1:2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 1: GENERAL
CSA C61400-2 : 2008 : R2018	WIND TURBINES - PART 2: DESIGN REQUIREMENTS FOR SMALL WIND TURBINES
ISO 8402:1994	Quality management and quality assurance — Vocabulary
AQAP 130 : 2	NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST
CLC/TS 61112:2006	Blankets of insulating material for electrical purposes
ISO 10955:1999	Aerospace — End-fittings and turnbarrels for aircraft control wire rope — Technical specification
ISO/TR 13881:2000	Petroleum and natural gas industries Classification and conformity assessment of products, processes and services
I.S. ISO 9004-2:1994	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES
ISO 9763:1999	Aerospace — Aircraft control wire rope assemblies — Technical specification
IEC 61479:2001+AMD1:2002 CSV	Live working - Flexible conductor covers (line hoses) of insulating material
IEC 61207-3:2002	Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
ISO 8230:1997	Safety requirements for dry-cleaning machines using perchloroethylene
BS EN ISO 15541:2001	Ships and marine technology. Fire resistance of hose assemblies. Requirements for the test bench
IEC 60746-2:2003	Expression of performance of electrochemical analyzers - Part 2: pH value
BS EN 12569:1999	Industrial valves. Valves for chemical and petrochemical process industry. Requirements and tests
BS EN 45012:1998	General requirements for bodies operating assessment and certification/registration of quality systems
IEC 61229:1993+AMD1:1998+AMD2:2002 CSV	Rigid protective covers for live working on a.c. installations
IEC 60746-1:2003	Expression of performance of electrochemical analyzers - Part 1: General
ISO 10012-1:1992	Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)
EN ISO 9004-1 : 1994	QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS
EN ISO 10007 : 1996	QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT
EN ISO 8230 : 1997	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
EN ISO 9000-1 : 1994	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994)
BS 5750-4:1990	Quality systems Guide to the use of BS 5750:Part 1 \'Specification for design/development, production, installation and servicing\', Part 2 \'Specification for production and installation\' and Part 3 \'Specification for final inspection and test\'
I.S. EN 61229:1999	RIGID PROTECTIVE COVERS FOR LIVE WORKING ON A.C. INSTALLATIONS
DEFSTAN 05-94/2(1995) : 1995	GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92 AND 05-93
ABMA ISO 13411 : 1998	AEROSPACE - AIRFRAME NEEDLE ROLLER, CYLINDRICAL ROLLER AND TRACK ROLLER BEARINGS - TECHNICAL SPECIFICATION
I.S. EN 45012:1998	GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
I.S. EN ISO 8230:1998	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES USING PERCHLOROETHYLENE
99/201503 DC : 0	IEC 61479 ED.1 - LIVE WORKING - CONDUCTOR COVERS (LINE HOSES) OR INSULATING MATERIAL FOR ELECTRICAL PURPOSES
S.R. CEN ISO/TR 13881:2011	PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES
CSA ISO 11134 : 0	STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR VALIDATION AND ROUTINE CONTROL - INDUSTRIAL MOIST HEAT STERILIZATION
CSA ISO 9000-2 : 0	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002, AND ISO 9003
DIN ISO 15226:2017-03	TECHNICAL PRODUCT DOCUMENTATION - LIFE CYCLE MODEL AND ALLOCATION OF DOCUMENTS (ISO 15226:1999)
BS EN ISO 9004-1:1994	Quality management and quality assurance standards. Guidelines
DIN ISO 2859-3:2007-10	SAMPLING PROCEDURES FOR INSPECTION BY ATTRIBUTES - PART 3: SKIP-LOT SAMPLING PROCEDURES
I.S. EN 60746-2:2003	EXPRESSION OF PERFORMANCE OF ELECTROCHEMICAL ANALYZERS - PART 2: PH VALUE
ABMA ISO 14190 : 1997	AEROSPACE - AIRFRAME ROLLING BEARINGS: BALL AND SPHERICAL ROLLER BEARINGS - TECHNICAL SPECIFICATION
98/402025 DC : DRAFT JAN 1998	BS ISO 13448-1 - ACCEPTANCE SAMPLING PROCEDURES BASED ON THE ALLOCATION-OF-PRIORITIES PRINCIPLE (APP) - PART 1: GUIDE TO THE APP APPROACH
BS IEC 61112:1992	Blankets of insulating material for electrical purposes
CSA C62155 : 2006 : R2011	HOLLOW PRESSURIZED AND UNPRESSURIZED CERAMIC AND GLASS INSULATORS FOR USE IN ELECTRICAL EQUIPMENT WITH RATED VOLTAGES GREATER THAN 1000 V
97/402277 DC : DRAFT APR 1997	PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
DEFSTAN 05-94/1(1991) : 1991	GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92, AND 05-93
BS 5750-0.2(1987) : 1987	QUALITY SYSTEMS - PRINCIPAL CONCEPTS AND APPLICATIONS - GUIDE TO QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS
BS 7229-1(1991) : AMD 7922	GUIDE TO QUALITY SYSTEMS AUDITING - AUDITING
IEC 62155:2003	Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
CSA C1325 : 1999 : R2011	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 61325:1997	INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
ISO 11134:1994	Sterilization of health care products — Requirements for validation and routine control — Industrial moist heat sterilization
CSA ISO 9004-3 : 1994	QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS
CSA CEI/IEC 1258 : 1998	GUIDELINES FOR THE DEVELOPMENT AND USE OF MEDICAL ELECTRICAL EQUIPMENT EDUCATIONAL MATERIALS
BS EN 61207-3:2002	Expression of performance of gas analyzers Paramagnetic oxygen analyzers
I.S. EN ISO 9000-1:1994	QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE
ISO 10011-1:1990	Guidelines for auditing quality systems Part 1: Auditing
BS EN ISO 10472-1:2008	Safety requirements for industrial laundry machinery Common requirements
EN 61897:1998	Overhead lines - Requirements and tests for Stockbridge type aeolian vibration dampers
EN 61325:1995	Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
DIN EN 45012:1990-05	GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
EN 61207-3:2002	Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers
EN 60746-2:2003	Expression of performance of electrochemical analyzers - Part 2: pH value
BS 5781-1(1992) : AMD 8147	QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT - METROLOGICAL CONFIRMATION SYSTEM FOR MEASURING EQUIPMENT

ISO 10011-3:1991	Guidelines for auditing quality systems Part 3: Management of audit programmes
ISO 10011-1:1990	Guidelines for auditing quality systems Part 1: Auditing
ISO 10013:1995	Guidelines for developing quality manuals
ISO 8402:1994	Quality management and quality assurance — Vocabulary
ISO 9002:1994	Quality systems — Model for quality assurance in production, installation and servicing
ISO 9000-2:1997	Quality management and quality assurance standards — Part 2: Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003
ISO/TR 13425:2006	Guidelines for the selection of statistical methods in standardization and specification
ISO 9001:2015	Quality management systems — Requirements
ISO 10012-1:1992	Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
ISO 9000-1:1994	Quality management and quality assurance standards — Part 1: Guidelines for selection and use
ISO 9000-3:1997	Quality management and quality assurance standards Part 3: Guidelines for the application of ISO 9001:1994 to the development, supply, installation and maintenance of computer software
ISO 10011-2:1991	Guidelines for auditing quality systems — Part 2: Qualification criteria for quality systems auditors