ISO 9614-2:1996

Current

Current The latest, up-to-date edition.

Add to Watchlist

This Standard has been added successfully to your Watchlist.
Please visit My Watchlist to see all standards that you are watching.

Please log in or create an account to add this standard to your Watchlist.

We could not add this standard to your Watchlist.
Please retry or contact support for assistance.

You need to be logged in to add this standard to your Watchlist.
Please log in now or create an account to add.

You already added this Product in the Watchlist.

Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning

Available format(s): Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

Language(s): English, French

Published date: 01-08-1996

Publisher: International Organization for Standardization

Add to Watchlist

Abstract - (Show below) - (Hide below)

Specifies a method for measuring the component of sound intensity normal to a measurement surface which is chosen so as to enclose the noise source(s) of which the sound power level is to be determined.

General Product Information - (Show below) - (Hide below)

Document Type	Standard
ISBN
Pages
Product Note	THIS STANDARD ALSO REFERS TO IEC 942:1988,IEC 1043:1993
Published
Publisher	International Organization for Standardization
Status	Current

International Equivalents – Equivalent Standard(s) & Relationship - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
JIS Z 8736-2:1999	Identical
NF EN ISO 199614-2 : 1996	Identical
NBN EN ISO 9614-2 : 1996	Identical
NEN EN ISO 9614-2 : 1996	Identical
NS EN ISO 9614-2 : 1ED 1997	Identical
I.S. EN ISO 9614-2:1997	Identical
PN EN ISO 9614-2 : 2000	Identical
SANS 9614-2 : 1ED 1996(R2012)	Identical
SN EN ISO 9614-2 : 1997	Identical
UNI EN ISO 9614-2 : 1998	Identical
SS-EN ISO 9614-2 : 1996	Identical
UNE-EN ISO 9614-2:1997	Identical
BS EN ISO 9614-2:1997	Identical
EN ISO 9614-2 : 1996	Identical
DIN EN ISO 9614-2:1996-12	Identical
ECMA 160 : 2ED 92	Corresponds

Standards Referenced By This Book - (Show below) - (Hide below)

CEI EN 60349-4 : 2014	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER
BS EN 60349-1:2010	Electric traction. Rotating electrical machines for rail and road vehicles Machines other than electronic converter-fed alternating current motors
00/561015 DC : DRAFT FEB 2000	BS EN ISO 3745 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OFNOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOICAND HEMI-ANECHOIC ROOMS
UNE-EN 16286-2:2014	Railway applications - Gangway systems between vehicles - Part 2: Acoustic measurements
03/313810 DC : 0	EN 14753 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL
I.S. EN 12639:2000	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
09/30179854 DC : 0	BS EN 13114:2002/A1 - TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
07/30166409 DC : 0	BS EN 14861:2004/A1 - FOREST MACHINERY - SELF PROPELLED MACHINERY - SAFETY REQUIREMENTS
BS EN 16430-1:2014	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
01/202453 DC : DRAFT APRIL 2001	IEC 60034-9 ED.4 - ROTATING ELECTRICAL MACHINERY - PART 9: NOISE LIMITS
07/30158774 DC : 0	BS EN 791 AMD1 - DRILL RIGS - SAFETY
16/30337092 DC	BS EN 13378. Pasta processing plant. Pasta presses. Safety and hygiene requirements
03/307943 DC : 0	ISO 7183 - COMPRESSED AIR DRYERS - SPECIFICATION AND TESTING
DIN EN 16486 E : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
I.S. EN 50569:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
13/30284844 DC : 0	BS EN 16644 - PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE - AND FLUID-BORNE
05/30129922 DC : DRAFT FEB 2005	EN 15036-2 - HEATING BOILERS - TEST REGULATIONS FOR THE AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 2: FLUE GAS NOISE EMISSIONS AT THE OUTLET OF THE HEAT GENERATOR
03/306044 DC : DRAFT APR 2003	BS EN 14656 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
I.S. EN ISO 11553-3:2013	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013)
UNE-EN ISO 15186-3:2011	Acoustics - Measurement of sound insulation in buildings and of building elements using sound intensity - Part 3: Laboratory measurements at low frequencies (ISO 15186-3:2002)
EN ISO 11202:2010	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
BS 7698-10:1999	Reciprocating internal combustion engine driven alternating current generating sets Measurement of airborne noise by the enveloping surface method
IEC 60335-2-69 REDLINE : 5.0	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
ANSI S12.57 : 2011	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
BS EN 16252:2012	Machines for compacting waste materials or recyclable fractions. Horizontal baling presses. Safety requirements
09/30179845 DC : 0	BS EN 13112:2002/A1 - TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY
DIN EN ISO 11553-3:2013-07	SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 3: NOISE REDUCTION AND NOISE MEASUREMENT METHODS FOR LASER PROCESSING MACHINES AND HAND-HELD PROCESSING DEVICES AND ASSOCIATED AUXILIARY EQUIPMENT (ACCURACY GRADE 2) (ISO 11553-3:2013)
BS EN 60335-2-67:2012 (published 2013-04)	Household and similar electrical appliances. Safety Particular requirements for floor treatment machines for commercial use
11/30249223 DC : 0	BS EN 50570 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 415-9:2009	SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
BS EN 60335-2-72:2012	Household and similar electrical appliances. Safety Particular requirements for floor treatment machines with or without traction drive, for commercial use
PREN ISO 11200 : DRAFT 2012	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO/DIS 11200:2012)
CSA C22.2 No. 62109-1 : 2016	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
CAN/CSA-C22.2 NO. 60335-2-72:2017	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE, FOR COMMERCIAL USE
CEI EN 60335-2-67 : 2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES FOR COMMERCIAL USE
BS ISO 230-5:2000	TEST CODE FOR MACHINE TOOLS - PART 5: DETERMINATION OF THE NOISE EMISSION
UNI EN 12012-4 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 4: SAFETY REQUIREMENTS FOR AGGLOMERATORS
EEMUA 140 : 2014	NOISE PROCEDURE SPECIFICATION
DIN EN 16486:2014-10	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
I.S. EN 62109-1:2010	SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
BS EN 50570:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric tumble dryers
I.S. EN 13141-11:2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
I.S. EN ISO 3740:2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
I.S. EN 12102:2013	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN 415-10:2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
CEI EN 50569 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
I.S. EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
I.S. EN 50570:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
I.S. EN 60034-9:2005	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
UNE-EN 13141-11:2015	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
16/30322398 DC : 0	BS EN 1612 - PLASTICS AND RUBBER MACHINES - REACTION MOULDING MACHINES AND PLANTS - SAFETY REQUIREMENTS
PD IEC/TS 61973:2012	HIGH VOLTAGE DIRECT CURRENT (HVDC) SUBSTATION AUDIBLE NOISE
UNE-EN 16500:2015	Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements
NF EN ISO 19085-1 : 2017	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS
UNE-EN ISO 19085-1:2018	Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)
16/30314039 DC : 0	BS EN 12301 - PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
BS EN 50569:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric spin extractors
UNI EN 12102 : 2014	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
I.S. EN 16644:2014	PUMPS - ROTODYNAMIC PUMPS - GLANDLESS CIRCULATORS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE
EN 12013:2018	Plastics and rubber machines - Internal mixers - Safety requirements
ISO 8579-1:2002	Acceptance code for gear units Part 1: Test code for airborne sound
DIN EN 13379:2016-06 (Draft)	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 415-7:2009-12	Safety of packaging machines - Part 7: Group and secondary packaging machines (includes Amendment A1:2008)
DIN EN 415-5:2010-04	Safety of packaging machines - Part 5: Wrapping machines (includes Amendment A1:2009)
DIN EN ISO 9902-4 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 13525:2010-05	FORESTRY MACHINERY - WOOD CHIPPERS - SAFETY
DIN EN 13378:2016-05 (Draft)	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN 13355:2010-06	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
DIN EN 15036-1:2006-12	Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
DIN EN ISO 9902-1 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 13141-6:2015-02	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
DIN EN 12012-3:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN ISO 11200:2014-10	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
DIN EN 13418:2013-08	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
DIN EN ISO 11688-1:2009-11	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
BS EN ISO 3741:2009	Acoustics. Determination of sound power levels of noise sources using sound pressure. Precision methods for reverberation rooms
UNE-EN ISO 11200:2014	Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014)
BS EN ISO 15186-1:2003	Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity Laboratory measurements
BS EN ISO 10442:2002	Petroleum, chemical and gas service industries. Packaged, integrally geared centrifugal air compressors
UNE-EN 13977:2012	Railway applications - Track - Safety requirements for portable machines and trolleys for construction and maintenance
BS EN ISO 11691:1997	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
ISO 3746:2010	Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane
UNE-EN ISO 11205:2010	Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity (ISO 11205:2003)
UNE-EN 60335-2-69:2013	Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
ISO 11203:1995	Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
BS EN 13418:2013	Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
ISO 11205:2003	Acoustics — Noise emitted by machinery and equipment — Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions using sound intensity
BS EN ISO 11201:2010	Acoustics. Noise emitted by machinery and equipment. Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
BS EN 14462:2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
BS EN ISO 11690-2:1997	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACE MACHINERY - PART 2: NOISE CONTROL MEASURES
ISO 9902-3:2001	Textile machinery — Noise test code — Part 3: Nonwoven machinery
BS EN ISO 9902-3 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY
BS EN 13378 : 2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
BS EN 15067:2007	PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
I.S. EN ISO 11691:2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN 13977:2011	RAILWAY APPLICATIONS - TRACK - SAFETY REQUIREMENTS FOR PORTABLE MACHINES AND TROLLEYS FOR CONSTRUCTION AND MAINTENANCE
I.S. EN 13141-6:2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
I.S. EN 13289:2001	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 4871:2009	ACOUSTICS - DECLARATION AND VERIFICATION OF NOISE EMISSION VALUES OF MACHINERY AND EQUIPMENT
DIN EN 1151-2:2006-11	PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 2: NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE
EN 12545:2000+A1:2009	Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
EN 1265:1999+A1:2008	Safety of machinery - Noise test code for foundry machines and equipment
EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
EN 13023:2003+A1:2010	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
DIN EN 15067:2008-03	Plastics and rubber machines - Film converting machines for bags and sacks - Safety requirements
EN 1114-1:2011	Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements for extruders
EN 16644:2014	Pumps - Rotodynamic pumps - Glandless circulators having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise
EN 12012-4:2006+A1:2008	Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators
EN 16228-1:2014	Drilling and foundation equipment - Safety - Part 1: Common requirements
EN 13141-11:2015	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 11: Supply ventilation units
EN 13379:2001+A1:2013	Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, stick magazine - Safety and hygiene requirements
EN 12639:2000/AC:2004	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND GRADE 3 OF ACCURACY
DIN EN ISO 9902-1:2001-07	TEXTILE MACHINERY - NOISE TEST CODE - PART 1: COMMON REQUIREMENTS (ISO 9902-1:2001 + AMD 1:2009 + AMD 2:2014)
EN 13141-8:2014	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 8: Performance testing of un-ducted mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for a single room
EN 60704-1:2010/A11:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS (IEC 60704-1:2010)
DIN EN ISO 11691:2010-01	Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995); German version EN ISO 11691:2009
DIN ISO 230-5:2006-03	Test code for machine tools - Part 5: Determination of the noise emission (ISO 230-5:2000)
EN 12547:2014	Centrifuges - Common safety requirements
DIN EN ISO 9902-2:2001-07	TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014)
EN 13112:2002+A1:2009	Tannery machines - Splitting and bandknife shearing machines - Safety requirements
EN 12102:2013	Air conditioners, liquid chilling packages, heat pumps and dehumidifiers with electrically driven compressors for space heating and cooling - Measurement of airborne noise - Determination of the sound power level
DIN EN 1114-2:2010-01	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
EN 60034-9:2005/A1:2007	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
EN 1151-2:2006/AC:2007	PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 2: NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE
EN 13378:2001+A1:2013	Pasta processing plants - Pasta presses - Safety and hygiene requirements
EN 13114:2002+A1:2009	Tannery machines - Rotating process vessels - Safety requirements
DIN EN ISO 4871:2009-11	Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
EN 300 176-2 : 2.2.1	DIGITAL ENHANCED CORDLESS TELECOMMUNICATIONS (DECT); TEST SPECIFICATION; PART 2: AUDIO AND SPEECH
EN 1114-2:1998+A1:2008	Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements for die face pelletisers
EN 13113:2002+A1:2010	Tannery machines - Roller coating machines - Safety requirements
EN 12215:2004+A1:2009	Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
EN 13289:2001+A1:2013	Pasta processing plants - Dryers and coolers - Safety and hygiene requirements
EN 13355:2004+A1:2009	Coating plants - Combined booths - Safety requirements
EN 12012-3:2001+A1:2008	Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for shredders
EN 12012-2:2001+A2:2008	Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers
EN 50570:2013/A1:2018	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
ONORM EN 13141-8 : 2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
ONORM EN 16583 : 2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
UNI EN ISO 15186-3 : 2010	ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS USING SOUND INTENSITY - PART 3: LABORATORY MEASUREMENTS AT LOW FREQUENCIES
03/313337 DC : DRAFT AUG 2003	EN 1151-2 - PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING AN ELECTRICAL EFFECT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 2: NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE
I.S. EN 16252:2012	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
BS EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 12012-1:2015-05 (Draft)	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
ASTM E 2249 : 2002	Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
BS ISO 18564:2016	Machinery for forestry. Noise test code
BS EN 415-9:2009 (published 2009-09)	Safety of packaging machines Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
10/30210548 DC : 0	BS EN 60704-2-13 ED 2.0 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-13: PARTICULAR REQUIREMENTS FOR RANGE HOODS
BS EN ISO 20361:2015	Liquid pumps and pump units. Noise test code. Grades 2 and 3 of accuracy
15/30326831 DC : 0	BS EN 1114-3 - PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
UNI EN 16500 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
11/30247811 DC : 0	BS EN 415-10 - SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
04/30122794 DC : DRAFT SEP 2004	EN 15036-1 - HEATING BOILERS - TEST REGULATIONS FOR AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS - PART 1: AIRBORNE NOISE EMISSIONS FROM HEAT GENERATORS AT PLACE OF INSTALLATION
I.S. EN ISO 10439:2002	PETROLEUM, CHEMICAL AND GAS SERVICE INDUSTRIES - CENTRIFUGAL COMPRESSORS
17/30341100 DC : 0	BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
BS EN 60349-4:2013	Electric traction. Rotating electrical machines for rail and road vehicles Permanent magnet synchronous electrical machines connected to an electronic converter
14/30302844 DC : 0	BS EN 60335-2-72 ED 3.0/AMD 1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-72: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES WITH OR WITHOUT TRACTION DRIVE FOR COMMERCIAL USE
13/30267124 DC : 0	BS EN 13141-11 - VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: POSITIVE PRESSURE VENTILATION SYSTEMS
PREN 1672-1 : DRAFT 2012	FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
DIN EN ISO 11201:2010-10	Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
BS EN ISO 15186-3:2010	Acoustics. Measurement of sound insulation in buildings and of building elements using sound intensity Laboratory measurements at low frequencies
DIN EN 13141-11 E : 2015	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 11: SUPPLY VENTILATION UNITS
11/30236548 DC : 0	BS EN 474-1:2006/A3 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
BS EN 16500:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
ISO 3977-4:2002	Gas turbines — Procurement — Part 4: Fuels and environment
DIN EN 16583:2015-10	Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
PREN 1114-3 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS
DIN EN 16583 E : 2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
12/30259421 DC : 0	BS EN 1672-1 - FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 1: SAFETY REQUIREMENTS
UNI EN 16228-1 : 2014	DRILLING AND FOUNDATION EQUIPMENT - SAFETY - PART 1: COMMON REQUIREMENTS
CSA Z107.58 : 2015	NOISE EMISSION DECLARATIONS FOR MACHINERY
03/306593 DC : DRAFT APR 2003	BS EN 14673 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
12/30255086 DC : 0	BS EN 289 - PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
BS EN ISO 8230-1:2008	Safety requirements for dry-cleaning machines Common safety requirements
UNE-EN 691-1:2013	Safety of woodworking machines - Part 1: Common requirements
12/30271386 DC : 0	BS EN 12102 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
02/705656 DC : DRAFT APR 2002	BS 848-2.4 - INDUSTRIAL FANS - DETERMINATION OF FAN SOUND POWER LEVEL UNDER STANDARDIZED LABORATORY CONDITIONS - PART 4: SOUND INTENSITY METHOD
15/30295265 DC : 0	BS EN 13204 - DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN ISO 10821 : 2010	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS
16/30345760 DC : 0	BS EN 12102-2 - AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
PREN 12012-1 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS AND SHREDDERS
DIN EN 16228-1:2014-10	Drilling and foundation equipment - Safety - Part 1: Common requirements; German version EN 16228-1:2014
14/30279098 DC : 0	BS ISO 18564 - MACHINERY FOR FORESTRY - NOISE TEST CODE
BS ISO 15665:2003	ACOUSTICS - ACOUSTIC INSULATION FOR PIPES, VALVES AND FLANGES
12/30270038 DC : 0	BS EN 16500 - MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - VERTICAL BALING PRESSES - SAFETY REQUIREMENTS
BS ISO 7183:2007	Compressed-air dryers. Specifications and testing
07/30094858 DC : 0	BS ISO 3747 - ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
BS EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
DIN EN ISO 20361:2016-05	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY (ISO 20361:2015)
PREN 13053 : DRAFT 2017	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
PREN 14462 : DRAFT 2012	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
CEI EN 60335-2-69 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-69: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR COMMERCIAL USE
ISO 10494:1993	Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method
ISO 18564:2016	Machinery for forestry Noise test code
UNI EN 16252 : 2013	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - HORIZONTAL BALING PRESSES - SAFETY REQUIREMENTS
UNI EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
NF EN 60034-9 : 2005 AMD 1 2007	ROTATING ELECTRICAL MACHINES - PART 9: NOISE LIMITS
I.S. EN 16486:2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
BIS IS/ISO 8528-10 : 1998(R2014)	RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 10: MEASUREMENT OF AIRBORNE NOISE BY THE ENVELOPING SURFACE METHOD
BS EN 60335-2-69:2012	Household and similar electrical appliances. Safety Particular requirements for wet and dry vacuum cleaners, including power brush for commercial use
BS EN 50416 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
PREN 12102-2 : DRAFT 2016	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - DETERMINATION OF THE SOUND POWER LEVEL - PART 2: HEAT PUMP WATER HEATERS
CEI EN 60349-1 : 2012	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
CEI EN 50570 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
PREN 13141-6 : DRAFT 2012	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 6: EXHAUST VENTILATION SYSTEM PACKAGES USED IN A SINGLE DWELLING
ISO 19085-1:2017	Woodworking machines Safety Part 1: Common requirements
I.S. EN 16583:2015	HEAT EXCHANGERS - HYDRONIC ROOM FAN COILS UNITS - DETERMINATION OF THE SOUND POWER LEVEL
ANSI/ASA S12.54/ISO 3744 : 2011(R2016)	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
UNI EN 415-9 : 2010	SAFETY OF PACKAGING MACHINES - PART 9: NOISE MEASUREMENT METHODS FOR PACKAGING MACHINES, PACKAGING LINES AND ASSOCIATED EQUIPMENT, GRADE OF ACCURACY 2 AND 3
TS 100 392-16 : 1.2.1	TERRESTRIAL TRUNKED RADIO (TETRA); VOICE PLUS DATA (V+D); PART 16: NETWORK PERFORMANCE METRICS
CEI EN 60076-10 : 2002	POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
I.S. EN 691-1:2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
ISO 13261-1:1998	Sound power rating of air-conditioning and air-source heat pump equipment Part 1: Non-ducted outdoor equipment
UNE-EN 50569:2014	Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors
ASTM E 2249 : 2002 : R2016	Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
PREN 289 : DRAFT 2012	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
EN ISO 3740 : 2000	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
BS EN ISO 3740:2001	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES - GUIDELINES FOR THE USE OF BASIC STANDARDS
UNI EN 13141-7 : 2011	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
EN ISO 3746:2010	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010)
ISO 7183:2007	Compressed-air dryers Specifications and testing
I.S. EN 13053:2006	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
ISO/TR 18569:2004	Safety of machinery Guidelines for the understanding and use of safety of machinery standards
DIN EN 12215:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
DIN EN 13114:2010-03	Tannery machines - Rotating process vessels - Safety requirements (includes Amendment A1:2009)
DIN EN 13112:2011-03	Tannery machines - Splitting and bandknife shearing machines - Safety requirements (includes Amendment A1:2009)
DIN EN ISO 9902-7 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 7: DYEING AND FINISHING MACHINERY (ISO 9902-7:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 12301:2015-12 (Draft)	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
DIN EN 1547:2010-02	Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment (includes Amendment A1:2009)
DIN EN 12981:2010-06	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
DIN EN 1417:2015-03	PLASTICS AND RUBBER MACHINES - TWO ROLL MILLS - SAFETY REQUIREMENTS
DIN EN 1265:2009-07	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 13141-8:2014-09	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
DIN EN ISO 9902-3 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN ISO 11688-2:2001-03	Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); German version EN ISO 11688-2:2000
DIN EN 14462 E : 2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
DIN EN 14681:2010-10	Safety of machinery - Safety requirements for machinery and equipment for production of steel by electric arc furnaces (includes Amendment A1:2010)
DIN EN ISO 9902-5:2014-10	TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 14656:2010-10	Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN ISO 9902-3:2014-10	TEXTILE MACHINERY - NOISE TEST CODE - PART 3: NONWOVEN MACHINERY (ISO 9902-3:2001 + AMD 1:2009 + AMD 2:2014)
UNE-EN 289:2014	Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements
ISO 4871:1996	Acoustics Declaration and verification of noise emission values of machinery and equipment
IEC 60349-2:2010	Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
BS EN 13355 : 2004	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
BS EN ISO 9902-2 : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY
UNE-EN 60335-2-72:2013	Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use
BS EN ISO 11546-1:1996	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
BS EN 13379 : 2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
ISO 19859:2016	Gas turbine applications Requirements for power generation
BS EN ISO 3744:2010	Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering methods for an essentially free field over a reflecting plane
BS EN 14673 : 2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
BS EN 12981 : 2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
UNE-EN 12547:2015	Centrifuges - Common safety requirements
UNE-EN 13418:2013	Plastics and rubber machines - Winding machines for film or sheet - Safety requirements
I.S. EN 13114:2002	TANNERY MACHINES - ROTATING PROCESS VESSELS - SAFETY REQUIREMENTS
I.S. EN 289:2014	PLASTICS AND RUBBER MACHINES - COMPRESSION MOULDING MACHINES AND TRANSFER MOULDING MACHINES - SAFETY REQUIREMENTS
I.S. EN 14656:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
DIN EN 12012-2:2010-02	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN ISO 12001:2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - RULES FOR THE DRAFTING AND PRESENTATION OF A NOISE TEST CODE
I.S. EN ISO 3747:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING/SURVEY METHODS FOR USE IN SITU IN A REVERBERANT ENVIRONMENT
I.S. EN 13379:2001	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13113:2002	TANNERY MACHINES - ROLLER COATING MACHINES - SAFETY REQUIREMENTS
I.S. EN 1846-2:2009	FIREFIGHTING AND RESCUE SERVICE VEHICLES - PART 2: COMMON REQUIREMENTS - SAFETY AND PERFORMANCE
I.S. EN 12215:2004	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC LIQUID COATING MATERIALS - SAFETY REQUIREMENTS
I.S. EN ISO 3743-1:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR SMALL MOVABLE SOURCES IN REVERBERANT FIELDS - PART 1: COMPARISON METHOD FOR A HARD-WALLED TEST ROOM
UNI EN ISO 11691 : 2009	ACOUSTICS - MEASUREMENT OF INSERTION LOSS OF DUCTED SILENCERS WITHOUT FLOW - LABORATORY SURVEY METHOD
I.S. EN ISO 3745:2012	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR ANECHOIC ROOMS AND HEMI-ANECHOIC ROOMS (ISO 3745:2012)
I.S. EN ISO 11204:2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING ACCURATE ENVIRONMENTAL CORRECTIONS
DIN EN ISO 11200:1996-07	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS (ISO 11200:2014)
I.S. EN 13141-8:2014	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 8: PERFORMANCE TESTING OF UN-DUCTED MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR A SINGLE ROOM
I.S. EN 13378:2001	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 13141-7:2010	VENTILATION FOR BUILDINGS - PERFORMANCE TESTING OF COMPONENTS/PRODUCTS FOR RESIDENTIAL VENTILATION - PART 7: PERFORMANCE TESTING OF A MECHANICAL SUPPLY AND EXHAUST VENTILATION UNITS (INCLUDING HEAT RECOVERY) FOR MECHANICAL VENTILATION SYSTEMS INTENDED FOR SINGLE FAMILY DWELLINGS
DIN EN 13053:2012-02	VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATING AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS (INCLUDES AMENDMENT A1:2011)
I.S. EN 1265:2000	SAFETY OF MACHINERY - NOISE TEST CODE FOR FOUNDRY MACHINES AND EQUIPMENT
DIN EN 13141-7:2011-01	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
DIN EN 12639:2000-06	LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADE 2 AND 3 OF ACCURACY
I.S. EN ISO 9902-4:2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 4: YARN PROCESSING, CORDAGE AND ROPE MANUFACTURING MACHINERY (ISO 9902-4:2001)
I.S. EN ISO 3741:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - PRECISION METHODS FOR REVERBERATION TEST ROOMS
I.S. EN 12981:2005	COATING PLANTS - SPRAY BOOTHS FOR APPLICATION OF ORGANIC POWDER COATING MATERIAL - SAFETY REQUIREMENTS
I.S. EN 1114-1:2011	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 1: SAFETY REQUIREMENTS FOR EXTRUDERS
I.S. EN 13418:2013	PLASTICS AND RUBBER MACHINES - WINDING MACHINES FOR FILM OR SHEET - SAFETY REQUIREMENTS
I.S. EN 1915-4:2005	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
EN ISO 11690-1 : 1996	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE WORKPLACES CONTAINING MACHINERY - NOISE CONTROL STRATEGIES
I.S. EN 14681:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR PRODUCTION OF STEEL BY ELECTRIC ARC FURNACES
I.S. EN ISO 1680:2013	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
I.S. EN 1547:2001	Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
I.S. EN ISO 11546-1:2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 1: MEASUREMENTS UNDER LABORATORY CONDITIONS (FOR DECLARATION PURPOSES)
I.S. EN 13355:2005	COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
I.S. EN ISO 3744:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHODS FOR AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE
I.S. EN ISO 11546-2:2009	ACOUSTICS - DETERMINATION OF SOUND INSULATION PERFORMANCES OF ENCLOSURES - PART 2: MEASUREMENTS IN SITU (FOR ACCEPTANCE AND VERIFICATION PURPOSES)
I.S. EN ISO 11688-1:2009	ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 1: PLANNING
I.S. EN 12545:2000	FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES - NOISE TEST CODE - COMMON REQUIREMENTS
I.S. EN 12012-3:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 3: SAFETY REQUIREMENTS FOR SHREDDERS
DIN EN 13289:2013-05	PASTA PROCESSING PLANTS - DRYERS AND COOLERS - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 12012-2:2001	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 415-5:2006	SAFETY OF PACKAGING MACHINES - PART 5: WRAPPING MACHINES
I.S. EN 1417:2014	PLASTICS AND RUBBER MACHINES - TWO-ROLL MILLS - SAFETY REQUIREMENTS
ONORM EN ISO 11203 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS FROM THE SOUND POWER LEVEL
EN ISO 9902-6:2001/A2:2014	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001/AMD 2:2014)
I.S. EN 12547:2014	CENTRIFUGES - COMMON SAFETY REQUIREMENTS
I.S. EN 1114-2:1998	PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 2: SAFETY REQUIREMENTS FOR DIE FACE PELLETISERS
DIN EN 13378:2013-05	PASTA PROCESSING PLANTS - PASTA PRESSES - SAFETY AND HYGIENE REQUIREMENTS
DIN EN ISO 10821:2013-02	INDUSTRIAL SEWING MACHINES - SAFETY REQUIREMENTS FOR SEWING MACHINES, UNITS AND SYSTEMS (ISO 10821:2005 + AMD 1:2009)
DIN EN 13379:2013-05	PASTA PROCESSING PLANTS - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR, STICK MAGAZINE - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN ISO 11205:2009	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - ENGINEERING METHOD FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
I.S. EN ISO 2151:2008	ACOUSTICS - NOISE TEST CODE FOR COMPRESSORS AND VACUUM PUMPS - ENGINEERING METHOD (GRADE 2)
I.S. EN 14673:2006	SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HYDRAULICALLY POWERED OPEN DIE HOT FORGING PRESSES FOR THE FORGING OF STEEL AND NON-FERROUS METALS
I.S. EN ISO 9614-3:2009	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY - PART 3: PRECISION METHOD FOR MEASUREMENT BY SCANNING
I.S. EN 13112:2002	TANNERY MACHINES - SPLITTING AND BANDKNIFE SHEARING MACHINES - SAFETY REQUIREMENTS
EN ISO 11691:2009	Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995)
DIN EN 12012-2:2004-03	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 2: SAFETY REQUIREMENTS FOR STRAND PELLETISERS
I.S. EN 14462:2015	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN 13023:2003	NOISE MEASUREMENT METHODS FOR PRINTING, PAPER CONVERTING, PAPER MAKING MACHINES AND AUXILIARY EQUIPMENT - ACCURACY GRADES 2 AND 3
I.S. EN ISO 11202:2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 11201:2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE WITH NEGLIGIBLE ENVIRONMENTAL CORRECTIONS
I.S. EN ISO 3746:2010	ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS AND SOUND ENERGY LEVELS OF NOISE SOURCES USING SOUND PRESSURE - SURVEY METHOD USING AN ENVELOPING MEASUREMENT SURFACE OVER A REFLECTING PLANE
I.S. EN ISO 9902-6:2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 6: FABRIC MANUFACTURING MACHINERY (ISO 9902-6:2001)
I.S. EN 415-7:2006	SAFETY OF PACKAGING MACHINES - PART 7: GROUP AND SECONDARY PACKAGING MACHINES
I.S. EN 13204:2016	DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
ONORM EN 16486 : 2014	MACHINES FOR COMPACTING WASTE MATERIALS OR RECYCLABLE FRACTIONS - COMPACTORS - SAFETY REQUIREMENTS
VDI 2715:2011-11	NOISE CONTROL IN HEATING SYSTEMS
UNE-EN 60349-4:2013	Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
ISO 11204:2010	Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections
EN 13141-7:2010	Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 7: Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
UNI EN 691-1 : 2012	SAFETY OF WOODWORKING MACHINES - PART 1: COMMON REQUIREMENTS
DIN EN 415-9:2010-02	Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, packaging lines and associated equipment, grade of accuracy 2 and 3
UNI EN 415-8 : 2008	SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES
BS ISO 15664:2001	Acoustics. Noise control design procedures for open plant
DIN EN 16252:2013-03	Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
09/30175681 DC : 0	BS EN 14656:2006/A1 - SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR EXTRUSION PRESSES FOR STEEL AND NON-FERROUS METALS
CEI EN 50571 : 2014	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
09/30182105 DC : 0	BS EN 60349-2 - ELECTRICAL TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
I.S. EN 16430-1:2014	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
04/30092090 DC : 0	ISO 20039 - ACOUSTICAL TEST METHODS AND SOUND POWER EQUIPMENT RATING PROCEDURE FOR TRANSPORTATION REFRIGERATION EQUIPMENT
BS EN 60349-2:2010	Electrical traction. Rotating electrical machines for rail and road vehicles Electronic converter-fed alternating current motors
I.S. EN 1151-2:2006	PUMPS - ROTODYNAMIC PUMPS - CIRCULATION PUMPS HAVING A RATED POWER INPUT NOT EXCEEDING 200 W FOR HEATING INSTALLATIONS AND DOMESTIC HOT WATER INSTALLATIONS - PART 2: NOISE TEST CODE (VIBRO-ACOUSTICS) FOR MEASURING STRUCTURE- AND FLUID-BORNE NOISE
PREN 13379 : DRAFT 2016	PASTA PROCESSING PLANT - SPREADER, STRIPPING AND CUTTING MACHINE, STICK RETURN CONVEYOR - SAFETY AND HYGIENE REQUIREMENTS
I.S. EN 60349-1:2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 1: MACHINES OTHER THAN ELECTRONIC CONVERTOR-FED ALTERNATING CURRENT MOTORS
02/540559 DC : DRAFT JULY 2002	EN 14466 - FIRE FIGHTING PUMPS - PORTABLE PUMPS - SAFETY AND PERFORMANCE REQUIREMENTS, TESTS
11/30248966 DC : 0	BS EN 50416: 2005/FPRAB - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
BS ISO 21630:2007	Pumps. Testing. Submersible mixers for wastewater and similar applications
BS IEC 60076-10-1:2016	Power transformers Determination of sound levels. Application guide
BS EN 60335-2-58 : 2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-58: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC DISHWASHING MACHINES
BS EN 16228-1:2014	Drilling and foundation equipment. Safety Common requirements
UNE-EN ISO 20361:2015	Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)
PREN 13204 : DRAFT 2015	DOUBLE ACTING HYDRAULIC RESCUE TOOLS FOR FIRE AND RESCUE SERVICE USE - SAFETY AND PERFORMANCE REQUIREMENTS
UNI EN ISO 8230-1 : 2009	SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS
14/30298371 DC : 0	BS EN 60335-2-68 ED 4.0 /A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES; FOR COMMERCIAL USE
BS EN 415-8:2008	Safety of packaging machines Strapping machines
04/30126355 DC : DRAFT DEC 2004	ISO 20361 - LIQUID PUMPS AND PUMP UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
BS EN 50571:2013	Household and similar electrical appliances. Safety. Particular requirements for commercial electric washing machines
00/562811 DC : DRAFT JUN 2000	BS ISO 11205 - ACOUSTICS - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS IN SITU AT THE WORK STATION AND AT OTHER SPECIFIED POSITIONS USING SOUND INTENSITY
14/30271248 DC : 0	BS EN 60310 ED 4.0 - RAILWAY APPLICATIONS - TRACTION TRANSFORMERS AND INDUCTORS ON BOARD ROLLING STOCK
I.S. EN 50571:2013	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC WASHING MACHINES
DIN EN 16430-1:2015-03	FAN ASSISTED RADIATORS, CONVECTORS AND TRENCH CONVECTORS - PART 1: TECHNICAL SPECIFICATIONS AND REQUIREMENTS
03/316891 DC : DRAFT OCT 2003	EN 13053 - VENTILATION FOR BUILDINGS - AIR HANDLING UNITS - RATINGS AND PERFORMANCE FOR UNITS, COMPONENTS AND SECTIONS
BS EN ISO 11553-3:2013	Safety of machinery. Laser processing machines Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade 2)
08/30174113 DC : DRAFT AUG 2008	BS EN 1915-4 AMD1 - AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
18/30369856 DC : 0	BS EN ISO 20361 - LIQUID PUMPS AND PUMPS UNITS - NOISE TEST CODE - GRADES 2 AND 3 OF ACCURACY
BS EN 60704-1 : 2010	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE NOISE - PART 1: GENERAL REQUIREMENTS
UNE-EN 16430-1:2015	Fan assisted radiators, convectors and trench convectors - Part 1: Technical specifications and requirements
DIN EN 415-10:2014-07	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 60349-4:2013	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 4: PERMANENT MAGNET SYNCHRONOUS ELECTRICAL MACHINES CONNECTED TO AN ELECTRONIC CONVERTER (IEC 60349-4:2012 (EQV))
I.S. EN 60349-2:2010	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
EN 16252:2012	Machines for compacting waste materials or recyclable fractions - Horizontal baling presses - Safety requirements
PREN 50570 : DRAFT 2011	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC TUMBLE DRYERS
CEI EN 60349-2 : 2012	ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
IEC 60335-2-69:2016 RLV	Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
UNI EN 415-10 : 2014	SAFETY OF PACKAGING MACHINES - PART 10: GENERAL REQUIREMENTS
I.S. EN 50416:2005	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES
ISO 10843:1997	Acoustics Methods for the description and physical measurement of single impulses or series of impulses
ANSI/ASA S12.50/ISO 3740 : 2002(R2017)	Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards - Nationally Adopted International Standards
IEC 60335-2-67:2012+AMD1:2016 CSV	Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
I.S. EN 12013:2018	PLASTICS AND RUBBER MACHINES - INTERNAL MIXERS - SAFETY REQUIREMENTS
UNI EN 16286-2 : 2013	RAILWAY APPLICATIONS - GANGWAY SYSTEMS BETWEEN VEHICLES - PART 2: ACOUSTIC MEASUREMENTS
UNE-EN 16583:2016	Heat exchangers - Hydronic room fan coils units - Determination of the sound power level
PREN 12102 : DRAFT 2012	AIR CONDITIONERS, LIQUID CHILLING PACKAGES, HEAT PUMPS AND DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS FOR SPACE HEATING AND COOLING - MEASUREMENT OF AIRBORNE NOISE - DETERMINATION OF THE SOUND POWER LEVEL
PREN 12301 : DRAFT 2015	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
PREN 50569 : DRAFT 2011	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC SPIN EXTRACTORS
EN ISO 19085-1:2017/AC:2018	WOODWORKING MACHINES - SAFETY - PART 1: COMMON REQUIREMENTS (ISO 19085-1:2017)
UNI EN 12012-1 : 2008	PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS
I.S. EN 12301:2000	PLASTICS AND RUBBER MACHINES - CALENDERS - SAFETY REQUIREMENTS
I.S. EN 60335-2-68:2012	HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-68: PARTICULAR REQUIREMENTS FOR SPRAY EXTRACTION MACHINES, FOR COMMERCIAL USE (IEC 60335-2-68:2012 (MOD))
I.S. EN 60076-10:2016	POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS
IEC 60335-2-69:2016	Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
IEC TS 61973:2012	High voltage direct current (HVDC) substation audible noise
DIN EN ISO 9902-2 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 2: SPINNING PREPARATORY AND SPINNING MACHINERY (ISO 9902-2:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 12547:2014-12	CENTRIFUGES - COMMON SAFETY REQUIREMENTS
DIN EN ISO 9902-5 E : 2001	TEXTILE MACHINERY - NOISE TEST CODE - PART 5: WEAVING AND KNITTING PREPARATORY MACHINERY (ISO 9902-5:2001 + AMD 1:2009 + AMD 2:2014)
DIN EN 1915-4:2009-06	AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS - PART 4: NOISE MEASUREMENT METHODS AND REDUCTION
DIN EN 12545:2010-07	Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements (includes Amendment A1:2009)
DIN EN 13023:2010-08	Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3 (includes Amendment A1:2010)
DIN EN 13113:2011-05	Tannery machines - Roller coating machines - Safety requirements (includes Amendment A1:2010)
DIN EN ISO 1680:2014-04	ACOUSTICS - TEST CODE FOR THE MEASUREMENT OF AIRBORNE NOISE EMITTED BY ROTATING ELECTRICAL MACHINES (ISO 1680:2013)
DIN EN ISO 3747:2011-03	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment (ISO 3747:2010)
DIN EN 15067 E : 2008	PLASTICS AND RUBBER MACHINES - FILM CONVERTING MACHINES FOR BAGS AND SACKS - SAFETY REQUIREMENTS
UNI EN ISO 11202 : 2010	ACOUSTICS - NOISE EMITTED BY MACHINERY AND EQUIPMENT - DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORKSTATION AND AT OTHER SPECIFIED POSITIONS APPLYING APPROXIMATE ENVIRONMENTAL CORRECTIONS
DIN EN ISO 3741:2011-01	Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms (ISO 3741:2010)
DIN EN 14673:2010-10	Safety of machinery - Safety requirements for hydraulically powered open die hot forging presses for the forging of steel and non-ferrous metals (includes Amendment A1:2010)
DIN EN 14462:2015-08	SURFACE TREATMENT EQUIPMENT - NOISE TEST CODE FOR SURFACE TREATMENT EQUIPMENT INCLUDING ITS ANCILLARY HANDLING EQUIPMENT - ACCURACY GRADES 2 AND 3
ISO 11546-1:1995