• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO 9705:1993

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Fire tests Full-scale room test for surface products
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

27-09-2018

Language(s)

English, French

Published date

17-06-1993

Specifies a test method that simulates a fire that under well ventilated conditions starts in a corner of a small room with a single open doorway. The method is intended to evaluate the contribution to fire growth provided by a surface product using a specified ignition source. It is especially suitable for products that for some reason cannot be tested in a small laboratory scale, e.g. thermoplastic materials, the effect of an insulating substrate, joints, surfaces with great irregularity.

DevelopmentNote
Also numbered as BS 476-33(1993). (07/2005)
DocumentType
Standard
Pages
31
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy

Standards Relationship
AS ISO 9705-2003 Identical
PN ISO 9705 : 1999 Identical

14/30300270 DC : 0 BS ISO 16733-1 - FIRE SAFETY ENGINEERING - SELECTION OF DESIGN FIRE SCENARIOS AND DESIGN FIRES - PART 1: SELECTION OF DESIGN FIRE SCENARIOS
BS ISO 24678-6:2016 Fire safety engineering. Requirements governing algebraic formulae Flashover related phenomena
05/30090262 DC : DRAFT MAY 2005 ISO 5658-2 - REACTION TO FIRE TESTS - PART 2: SPREAD OF FLAME
ISO 16405:2015 Room corner and open calorimeter Guidance on sampling and measurement of effluent gas production using FTIR technique
CEI UNI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BS ISO/TR 14696:1999 Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)
05/30136503 DC : 0 PREN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
06/30151267 DC : 0 BS ISO CD 10840 - PLASTICS - GUIDANCE FOR THE USE OF STANDARD FIRE TESTS
BS ISO 11925-3:1997 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Multi-source test
PREN 14309 : DRAFT 2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
16/30336421 DC : 0 BS EN 81-58 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
MIL-PRF-32489 Base Document:2014 PILLOW, FLAME RESISTANT, SHIPBOARD
12/30255984 DC : 0 BS ISO 16405 - MEASUREMENT OF TOXIC GAS PRODUCTION USING FTIR TECHNIQUE FOR ROOM CORNER TEST AND OPEN CALORIMETRY
DD ISO/TS 14934-4:2007 Fire tests. Calibration of heat flux meters Guidance on the use of heat flux meters in fire tests
ISO 24473:2008 Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW
DIN EN 16069:2015-04 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
ISO 10840:2008 Plastics Guidance for the use of standard fire tests
ISO 16733-1:2015 Fire safety engineering — Selection of design fire scenarios and design fires — Part 1: Selection of design fire scenarios
ISO 13785-2:2002 Reaction-to-fire tests for faades Part 2: Large-scale test
BS EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
I.S. EN 13501-1:2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
UNI EN ISO 25762 : 2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
ASTM E 1537 : 2016 : REDLINE Standard Test Method for Fire Testing of Upholstered Furniture
ISO/TR 5660-3:2003 Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
NFPA 555 : 2017 METHODS FOR EVALUATING POTENTIAL FOR ROOM FLASHOVER
NFPA 76 : 2016 FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES
03/318326 DC : DRAFT NOV 2003
UNE-EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
EN 60695-8-2:2017 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
BS 6203:2003 Guide to fire characteristics and fire performance of expanded polystyrene materials (EPS and XPS) used in building applications
06/30116005 DC : DRAFT MAY 2006 ISO/TR 14697 - REACTION TO FIRE TESTS - GUIDANCE ON THE CHOICE OF SUBSTRATES FOR BUILDING AND TRANSPORT PRODUCTS
04/19990095 DC : 0 BS EN 45545-2 - RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
BS ISO TR 9705-2:2001 Reaction to fire tests. Full scale room tests for surface products Technical background and guidance
DIN EN ISO 25762:2012-04 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
12/30260441 DC : 0 BS ISO 14886 - SHIPS AND MARINE TECHNOLOGY - LARGE YACHTS - STRUCTURAL FIRE PROTECTION FOR FRP YACHTS
07/30147204 DC : 0 BS 476-10 - FIRE TESTS ON BUILDING MATERIALS AND STRUCTURES - PART 10: GUIDE TO THE PRINCIPLES, SELECTION, ROLE AND APPLICATION OF FIRE TESTING AND THEIR OUTPUTS
ISO 13784-2:2002 Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
ISO 13785-1:2002 Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
BS ISO 10840:2008 Plastics. Guidance for the use of standard fire tests
BS ISO 16733-1:2015 Fire safety engineering. Selection of design fire scenarios and design fires Selection of design fire scenarios
06/30117323 DC : 0 ISO 20632 - ROOM TEST FOR PIPE INSULATION
ISO/TR 13387-4:1999 Fire safety engineering Part 4: Initiation and development of fire and generation of fire effluents
00/121556 DC : DRAFT APR 2000 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
BS ISO TR 11925-1:1999 Reaction to fire tests. Ignitability of building products subjected to direct impingement of flame Guidance on ignitability
UNE-EN 13501-1:2007 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
DIN EN 14309 E : 2016 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
DIN EN 45545-2:2016-02 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
UNE-EN 14309:2017 Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification
AFAP-1 : 2010 NATO REACTION-TO-FIRE TESTS FOR MATERIALS - POLICY FOR THE PRE-SELECTION OF MATERIALS FOR MILITARY APPLICATIONS
DIN EN 14309:2016-03 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
I.S. EN 45545-2:2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS
ISO 5658-2:2006 Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
UNE-EN 50399:2012 Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
ASTM E 2102 : 2017 : REDLINE Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
NFPA 301 : 2018 SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS
PD IEC/TR 62222:2012 Fire performance of communication cables installed in buildings
BS EN ISO 15791-1:2013 Plastics. Development and use of intermediate-scale fire tests for plastics products General guidance
EN 45545-2:2013+A1:2015 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components
I.S. EN ISO 15791-1:2013 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014)
BS 476-10:2009 Fire tests on building materials and structures Guide to the principles, selection, role and application of fire testing and their outputs
BS ISO/TR 14697:1997 Fire tests. Guidance on the choice of substrates for building products
UNI CEI EN 45545-2 : 2013 RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAUVIOR OF MATERIALS AND COMPONENTS
BS ISO TR 5658-1:1997 Reaction to fire tests. Spread of flame Guidance on flame spread
ASTM E 2280 : 2017 : REDLINE Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
ISO/TS 16733:2006 Fire safety engineering Selection of design fire scenarios and design fires
BS ISO/TR 11696-2:1999 Uses of reaction to fire test results Fire hazard assessment of construction products
03/115041 DC : DRAFT SEP 2003 ISO/DIS 17431 - FIRE TEST - REDUCED-SCALE MODEL BOX TEST
BS ISO/TR 11696-1:1999 Uses of reaction to fire test results Application of test results to predict fire performance of internal linings and other building products
I.S. EN 50399:2011 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS
BS ISO 14934-4:2014 Fire tests. Calibration and use of heat flux meters Guidance on the use of heat flux meters in fire tests
I.S. EN 14309:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
I.S. EN 60695-8-2:2017 FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
BS 7904:1998 Guide to smoke measurement units. Their basis and use in smoke opacity test methods
BS ISO 16405:2015 Room corner and open calorimeter. Guidance on sampling and measurement of effluent gas production using FTIR technique
ISO/TR 11925-1:1999 Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
BS ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
ISO 14697:2007 Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products
ISO 20632:2008 Reaction-to-fire tests — Small room test for pipe insulation products or systems
BS EN 14309:2015 Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
BS ISO 5658-2 : 2006 REACTION TO FIRE TESTS - SPREAD OF FLAME - PART 2: LATERAL SPREAD ON BUILDING AND TRANSPORT PRODUCTS IN VERTICAL CONFIGURATION
BS EN 50399:2011 Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
ISO/TS 14934-4:2007 Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
UNI EN 13501-1 : 2009 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
FM 4880 : 2017 EVALUATING THE FIRE PERFORMANCE OF INSULATED BUILDING PANEL ASSEMBLIES AND INTERIOR FINISH MATERIALS
ASTM E 1623 : 2016 : REDLINE Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
ASTM E 1822 : 2017 : REDLINE Standard Test Method for Fire Testing of Stacked Chairs
PREN 81-58 : DRAFT 2016 SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - EXAMINATION AND TESTS - PART 58: LANDING DOORS FIRE RESISTANCE TEST
ASTM F 1870 : 2016 : REDLINE Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
ISO/TR 10840:1993 Plastics Burning behaviour Guidance for development and use of fire tests
ISO 14934-4:2014 Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
ISO/TS 5660-3:2012 Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement
ISO 12949:2011 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets
BS EN 13501-1 : 2007 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
IEC TR 60695-8-2:2008 Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods
ASTM E 603 : 2017 : REDLINE Standard Guide for Room Fire Experiments
EN 13501-1:2007+A1:2009 Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
EN ISO 15791-1:2013 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
UNI EN ISO 15791-1 : 2014 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
ISO/TR 14696:1999 Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
15/30315084 DC : DRAFT MAY 2015 BS EN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
12/30255590 DC : 0 BS ISO 3008-2 - FIRE-RESISTANCE TESTS - PART 2: LIFT LANDING DOOR ASSEMBLIES
BS EN 16069 : 2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
BS ISO 25762 : 2009 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES
BS ISO 5658-4:2001 Reaction to fire tests. Spread of flame Intermediate-scale test of vertical spread of flame with vertically oriented specimen
BS ISO/TR 13387-4:1999 Fire safety engineering Initiation and development of fire and generation of fire effluents
ASTM E 2067 : 2015 : REDLINE Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
BS DD246(1999) : 1999 RECOMMENDATIONS FOR THE USE OF THE CONE CALORIMETER
FM 4924 : 2013 PIPE AND DUCT INSULATION
08/30192184 DC : 0 ISO 15928-4 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 4: FIRE SAFETY
10/30207740 DC : 0 BS ISO 12949 - STANDARD TEST METHOD FOR MEASURING THE HEAT RELEASE RATE OF LOW FLAMMABILITY MATTRESSES AND MATTRESS SET
ISO/TR 17252:2008 Fire tests Applicability of reaction to fire tests to fire modelling and fire safety engineering
ASTM E 2257 : 2017 : REDLINE Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
ISO/TS 17431:2006 Fire tests Reduced-scale model box test
08/30169534 DC : DRAFT APR 2008 BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
PD ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents. Steady-state tube furnace
I.S. EN 16069:2012 THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION
03/308231 DC : 0 EN 50399-1 - COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - PART 1: APPARATUS
DIN EN 13501-1:2010-01 FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS
PD ISO/TR 16576:2017 Fire safety engineering. Examples of fire safety objectives, functional requirements and safety criteria
NFPA 289 : 2013 STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES
BS ISO 15791-1 : 2002 AMD 15256 PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE
DD ISO/TS 5658-1:2006 Reaction to fire tests. Spread of flame Guidance on flame spread
ASTM E 1590 : 2017 : REDLINE Standard Test Method for Fire Testing of Mattresses
ISO 14886:2014 Ships and marine technology Large yachts Structural fire protection for FRP yachts
I.S. EN ISO 25762:2012 PLASTICS - GUIDANCE ON THE ASSESSMENT OF THE FIRE CHARACTERISTICS AND FIRE PERFORMANCE OF FIBRE-REINFORCED POLYMER COMPOSITES (ISO 25762:2009)
ISO 29903:2012 Guidance for comparison of toxic gas data between different physical fire models and scales
ISO 13784-1:2014 Reaction to fire test for sandwich panel building systems — Part 1: Small room test
ISO 14696:2009 Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)
ISO/TR 11696-2:1999 Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
BS EN ISO 10093:1999 Plastics. Fire tests. Standard ignition sources
BS EN 60695-8-2:2017 Fire hazard testing Heat release. Summary and relevance of test methods
09/30193524 DC : 0 BS EN 62222 - FIRE PERFORMANCE OF COMMUNICATION CABLES INSTALLED IN BUILDINGS - METHODS OF FIRE RETARDANCY
UNE-EN ISO 15791-1:2014 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
ISO 10093:1998 Plastics Fire tests Standard ignition sources
IEC TR 62222:2012 Fire performance of communication cables installed in buildings
UNE-EN 16069:2013 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
ISO 15791-1:2014 Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance
ISO 25762:2009 Plastics Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
EN ISO 10093:1998 PLASTICS - FIRE TESTS - STANDARD IGNITION SOURCES
EN 16069:2012+A1:2015 Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification
EN 14309:2015 THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION
EN ISO 25762:2012 Plastics - Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites (ISO 25762:2009)
ISO 3008-2:2017 Fire-resistance tests — Part 2: Lift landing door assemblies
BS EN ISO 25762:2012 Plastics. Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
13/30292037 DC : 0 BS ISO 14934-4 - FIRE TESTS - CALIBRATION OF HEAT FLUX METERS - PART 4: GUIDANCE ON THE USE OF HEAT FLUX METERS IN FIRE TESTS
16/30331280 DC (published 2016-04) BS ISO 3008-2. Fire-resistance tests. Part 2. Lift landing door assemblies
06/30133753 DC : DRAFT MAY 2006 ISO 24473 - FIRE TESTS - OPEN CALORIMETRY - MEASUREMENT OF THE RATE OF PRODUCTION OF HEAT AND COMBUSTION PRODUCTS FOR FIRES OF UP TO 20MW
12/30211334 DC : 0 BS ISO 15791-1 - PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO/DIS 15791-1:2012)
PD ISO/TS 5660-3:2012 Reaction-to-fire tests. Heat release, smoke production and mass loss rate Guidance on measurement
UNE-ISO 16733-1:2017 Fire safety engineering.Selection of design fire scenarios and design fires.Part 1: Selection of design fire scenarios
MIL-DTL-24688 Revision A:2011 INSULATION, THERMAL AND ACOUSTIC ABSORPTIVE, CELLULAR POLYIMIDE FOAM
BS ISO 14886:2014 Ships and marine technology. Large yachts. Structural fire protection for FRP yachts
BS ISO 14697:2007 Reaction-to-fire tests. Guidance on the choice of substrates for building and transport products
PD 7974-1:2003 Application of fire safety engineering principles to the design of buildings Initiation and development of fire within the enclosure of origin (Sub-system 1)
IEC 60695-1-12:2015 Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnical products - Fire safety engineering
UNE-EN 45545-2:2013 Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components
ISO 24678-6:2016 Fire safety engineering — Requirements governing algebraic formulae — Part 6: Flashover related phenomena
ISO/TR 16576:2017 Fire safety engineering Examples of fire safety objectives, functional requirements and safety criteria
ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace
ISO/TS 5658-1:2006 Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
ISO 19702:2015 Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy
ISO 29904:2013 Fire chemistry Generation and measurement of aerosols
DIN EN ISO 15791-1:2014-05 Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
13/30277762 DC : 0 BS EN 60695-8-2 IEC 60695-8-2 ED 1.0 - FIRE HAZARD TESTING - PART 8-2: HEAT RELEASE - SUMMARY AND RELEVANCE OF TEST METHODS
PD IEC/TR 60695-8-2:2008 Fire hazard testing Heat release. Summary and relevance of test methods
EN 50399 : 2011 AMD 1 2016 COMMON TEST METHODS FOR CABLES UNDER FIRE CONDITIONS - HEAT RELEASE AND SMOKE PRODUCTION MEASUREMENT ON CABLES DURING FLAME SPREAD TEST - TEST APPARATUS, PROCEDURES, RESULTS

ISO 3261:1975 Fire tests — Vocabulary

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.