|
ISO 5660-1:2015
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
|
|
ISO 16736:2006
|
Fire safety engineering — Requirements governing algebraic equations — Ceiling jet flows
|
|
ISO 5725-1:1994
|
Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions
|
|
ISO 13785-1:2002
|
Reaction-to-fire tests for façades — Part 1: Intermediate-scale test
|
|
ISO 5658-2:2006
|
Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration
|
|
ISO 13784-2:2002
|
Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms
|
|
ISO/TR 13387-1:1999
|
FIRE SAFETY ENGINEERING - PART 1: APPLICATION OF FIRE PERFORMANCE CONCEPTS TO DESIGN OBJECTIVES
|
|
ISO 9705:1993
|
Fire tests Full-scale room test for surface products
|
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
|
ISO 5657:1997
|
Reaction to fire tests Ignitability of building products using a radiant heat source
|
|
ISO 16734:2006
|
Fire safety engineering — Requirements governing algebraic equations — Fire plumes
|
|
ISO 5660-2:2002
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 2: Smoke production rate (dynamic measurement)
|
|
ISO/TR 13387-3:1999
|
Fire safety engineering Part 3: Assessment and verification of mathematical fire models
|
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
|
ISO/TS 14934-1:2002
|
Fire tests Calibration and use of radiometers and heat flux meters Part 1: General principles
|
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
|
ISO 5658-4:2001
|
Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen
|
|
ISO/TR 13387-8:1999
|
FIRE SAFETY ENGINEERING - PART 8: LIFE SAFETY - OCCUPANT BEHAVIOUR, LOCATION AND CONDITION
|
|
ISO/TR 14696:1999
|
Reaction to fire tests Determination of fire parameters of materials, products and assemblies using an intermediate-scale heat release calorimeter (ICAL)
|
|
ISO/TS 16732:2005
|
Fire safety engineering Guidance on fire risk assessment
|
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
|
ISO/TR 3814:1989
|
Tests for measuring "reaction-to-fire" of building materials — Their development and application
|
|
ISO 13785-2:2002
|
Reaction-to-fire tests for façades — Part 2: Large-scale test
|
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
|
ISO/TS 5658-1:2006
|
Reaction to fire tests — Spread of flame — Part 1: Guidance on flame spread
|
|
ISO/TR 13387-7:1999
|
Fire safety engineering Part 7: Detection, activation and suppression
|
|
ISO/TR 9705-2:2001
|
Reaction-to-fire tests Full-scale room tests for surface products Part 2: Technical background and guidance
|
|
ISO 17554:2014
|
Reaction to fire tests Mass loss measurement
|
|
ISO/IEC Guide 52:1990
|
Glossary of fire terms and definitions
|
|
ISO/TR 11696-1:1999
|
Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products
|
|
ISO/TR 5660-3:2003
|
Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 3: Guidance on measurement
|
|
ISO/TR 13387-4:1999
|
Fire safety engineering — Part 4: Initiation and development of fire and generation of fire effluents
|
|
ISO/TR 13387-2:1999
|
Fire safety engineering Part 2: Design fire scenarios and design fires
|
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
|
|
ISO/TS 14934-4:2007
|
Fire tests Calibration of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests
|
|
ISO/TR 13387-6:1999
|
Fire safety engineering Part 6: Structural response and fire spread beyond the enclosure of origin
|
|
ISO 9239-2:2002
|
Reaction to fire tests for floorings — Part 2: Determination of flame spread at a heat flux level of 25 kW/m2
|
|
ISO 14934-2:2013
|
Fire tests — Calibration and use of heat flux meters — Part 2: Primary calibration methods
|
|
ISO 14934-3:2012
|
Fire tests — Calibration and use of heat flux meters — Part 3: Secondary calibration method
|
|
ISO 554:1976
|
Standard atmospheres for conditioning and/or testing — Specifications
|
|
ISO 13784-1:2014
|
Reaction to fire test for sandwich panel building systems — Part 1: Small room test
|
|
ISO 9239-1:2010
|
Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source
|
|
ISO/TR 11696-2:1999
|
Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products
|
|
ISO 13927:2015
|
Plastics — Simple heat release test using a conical radiant heater and a thermopile detector
|
|
ISO/TR 11925-1:1999
|
Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability
|
|
ISO/TR 13387-5:1999
|
Fire safety engineering Part 5: Movement of fire effluents
|
|
ISO 16737:2012
|
Fire safety engineering — Requirements governing algebraic equations — Vent flows
|
|
ISO 11907-4:1998
|
Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.