• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ISO/TS 20100:2008

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Gaseous hydrogen Fuelling stations
Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

18-03-2019

Language(s)

English

Published date

17-11-2008

ISO/TS 20100:2008 specifies the characteristics of outdoor public and non-public fuelling stations that dispense gaseous hydrogen used as fuel onboard land vehicles of all types.

Residential and home applications to fuel land vehicles are not covered.

DevelopmentNote
Earlier was withdrawn by publisher in 2015, now replaced by ISO TS 19880-1. (07/2016)
DocumentType
Technical Specification
Pages
47
PublisherName
International Organization for Standardization
Status
Withdrawn
SupersededBy

Standards Relationship
UNE-ISO/TS 20100:2013 Identical
NEN NPR ISO/TS 20100 : 2008 Identical
DD ISO/TS 20100:2008 Identical

ISO 22734-2:2011 Hydrogen generators using water electrolysis process Part 2: Residential applications
09/30150663 DC : 0 BS ISO 22734-2 - HYDROGEN GENERATORS USING WATER ELECTROLYSIS PROCESS - PART 2: RESIDENTIAL APPLICATIONS
BS ISO 22734-2:2011 Hydrogen generators using water electrolysis process Residential applications

ISO/TR 15916:2015 Basic considerations for the safety of hydrogen systems
EN 13458-2:2002/AC:2006 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
ISO 15649:2001 Petroleum and natural gas industries — Piping
EN 13530-2:2002/AC:2006 CRYOGENIC VESSELS - LARGE TRANSPORTABLE VACUUM-INSULATED VESSELS - PART 2: DESIGN, FABRICATION, INSPECTION AND TESTING
EN 13458-1:2002 Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
ISO 21013-3:2016 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 3: Sizing and capacity determination
ISO 21013-1:2008 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 1: Reclosable pressure-relief valves
ISO 4126-1:2013 Safety devices for protection against excessive pressure Part 1: Safety valves
IEC 61511-1:2016+AMD1:2017 CSV Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements
ISO 21011:2008 Cryogenic vessels — Valves for cryogenic service
IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
IEC 61340-5-1:2016 Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
EN 1503-2:2000 Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards
IEC 60204-1:2016 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
ISO 16110-1:2007 Hydrogen generators using fuel processing technologies Part 1: Safety
IEC 61000-6-1 : 3.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS
EN 13648-2:2002 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices for cryogenic service
ISO 14113:2013 Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)
EN 13237:2012 Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
ISO 5817:2014 Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections
ISO 21028-1:2016 Cryogenic vessels Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
EN 1626:2008 Cryogenic vessels - Valves for cryogenic service
IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
EN 764-7:2002/AC:2006 PRESSURE EQUIPMENT - PART 7: SAFETY SYSTEMS FOR UNFIRED PRESSURE EQUIPMENT
ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
ISO 22734-1:2008 Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications
IEC 61340-4-1:2003+AMD1:2015 CSV Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
ISO/IEC Guide 73:2002 Risk management Vocabulary Guidelines for use in standards
EN 13371:2001 Cryogenic vessels - Couplings for cryogenic service
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 61069-7:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety
ISO 16528-1:2007 Boilers and pressure vessels — Part 1: Performance requirements
ISO 4126-2:2003 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
IEC 60079-29-2:2015 RLV Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen
ISO 24490:2016 Cryogenic vessels Pumps for cryogenic service
IEC 60079-6:2015 Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"
IEC 60079-0:2011 Explosive atmospheres - Part 0: Equipment - General requirements
EN 13530-1:2002 Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements
EN 13648-1:2008 Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Safety valves for cryogenic service
EN 13501-3:2005+A1:2009 Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers
IEC 61000-6-1:2016 Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments
IEC 60079-14:2013 Explosive atmospheres - Part 14: Electrical installations design, selection and erection
ISO 17268:2012 Gaseous hydrogen land vehicle refuelling connection devices
ISO 7751:2016 Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure
ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
ISO 4414:2010 Pneumatic fluid power General rules and safety requirements for systems and their components
ISO 13850:2015 Safety of machinery Emergency stop function Principles for design
IEC 60079-30-1:2007 Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
CGA G 5.5 : 2014 HYDROGEN VENT SYSTEMS
1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
ISO 21013-2:2007 Cryogenic vessels Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
EN 12434:2000/AC:2001 CRYOGENIC VESSELS - CRYOGENIC FLEXIBLE HOSES
EN 1081:1998 Resilient floor coverings - Determination of the electrical resistance
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
ISO 21009-1:2008 Cryogenic vessels — Static vacuum-insulated vessels — Part 1: Design, fabrication, inspection and tests
IEC 62305-3:2010 Protection against lightning - Part 3: Physical damage to structures and life hazard
ISO 12944-7:2017 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work
ISO 23208:2017 Cryogenic vessels — Cleanliness for cryogenic service
EN 13458-3:2003/A1:2005 CRYOGENIC VESSELS - STATIC VACUUM INSULATED VESSELS - PART 3: OPERATIONAL REQUIREMENTS
ISO 21012:2006 Cryogenic vessels Hoses
1994/9/EC : 1994 DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT

View more information
£58.00
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.