|
MIL V 1189 : D
|
VALVE, GATE, BRONZE, FLANGED ENDS, WORKING PRESSURES UP TO 400 PS [SHIPBOARD USE]
|
|
MIL F 24787/4 : 0
|
FITTINGS, END, TYPES E AND EL, SPLIT CLAMP, REUSABLE, WITH TYPES SC (SPLIT CLAMP), TF TAILPIECE FEMALE AND TM TAILPIECE MALE FOR FLEXIBLE HOSE ASSEMBLIES
|
|
MIL H 24136/4 : A
|
HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED, FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -40, -48 AND -64)
|
|
MIL F 24787/5 : 0
|
FITTINGS, END, TYPE D, HOSE TO HOSE 90 DEGREES ELBOW, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES
|
|
MIL-PRF-32307 Revision A:2017
|
VALVE, QUARTER TURN, TRIPLE-OFFSET, TORQUE SEATED, SHIPBOARD USE
|
|
SAE J 1781 : 2013
|
SHIP SYSTEMS AND EQUIPMENT - MATERIALS FOR FLUID SYSTEMS
|
|
MIL V 24569 : 0
|
VALVE, QUICK CLOSING, FOR FUEL OIL AND AUXILIARY STEAM EMERGENCY SHUTDOWN
|
|
MIL-V-2961 Revision D:1990
|
VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE
|
|
MIL STD 248 : D
|
WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
|
|
MIL H 24136/1 : A
|
HOSE, SYNTHETIC RUBBER, SYNTHETIC FIBER REINFORCED FOR FLEXIBLE HOSE ASSEMBLIES (LOW PRESSURE SIZES -80 THROUGH -192)
|
|
ASTM F 1370 : 1992 : R2011
|
Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
|
|
MIL V 24624 : 0
|
VALVE, BUTTERFLY, WAFER AND LUG STYLE, SHIPBOARD SERVICE
|
|
MIL-STD-278 Revision F:1987
|
WELDING AND CASTING STANDARD
|
|
ASTM F 1370 : 1992 : R2005
|
Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
|
|
MIL-DTL-24509 Revision B:2017
|
Valves, Flanged, Balland Plugfor Sewageand Seawater Service
|
|
MIL H 24595 : NOTICE 2
|
HOSE, WIRE REINFORCED LARGE DIAMETER WITH REUSABLE END FITTINGS FOR FLEXIBLE CONNECTIONS
|
|
DOD-HDBK-249 Revision A:1984
|
METALS AND ALLOYS RAPID ON-SITE IDENTIFICATION OF (RECOMMENDED PROCEDURE FOR CHEMICAL SPOT TESTING AND ASSOCIATED PHYSICAL TESTS TO VERIFY METAL ALLOY CLASSIFICATION) (METRIC)
|
|
MIL C 15730 : M
|
COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER
|
|
MIL C 19836 : B
|
COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD
|
|
ASTM F 1370 : 1992
|
Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
|
|
MIL-STD-2195 Revision A:1993
|
Inspection Procedure for Detection and Measurement of Dealloying Corrosion on Aluminum Bronze and Nickel-Aluminum Bronze Components
|
|
MIL-V-2042 Revision E:1990
|
VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE
|
|
DOD V 24657 : 0
|
VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC)
|
|
MIL-HDBK-270 Revision A:1991
|
METALLIC MATERIALS FOR LOW MAGNETIC APPLICATIONS, MAGNETIC PERMEABILITY AND ELECTRICAL CONDUCTIVITY, CHARACTERISTICS OF (METRIC)
|
|
MIL-E-24759 Base Document:1991
|
REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE
|
|
MIL V 17547 : A
|
VALVES, CHECK, BRONZE (NAVY)
|
|
NAVSEA S9074 AQ GIB 010/248 : 0
|
REQUIREMENTS FOR WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION
|
|
MIL-R-24414 Revision D:1991
|
REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED
|
|
MIL-DTL-17849 Revision F:2018
|
Strainers, Sediment, Pipeline, Duplex (with and without Magnet)
|
|
MIL V 23953 : C
|
VALVE, COMBINED VENT-CHECK FOR SUBMARINE MBT BLOW LINES (SIZES 1-1/2 TO 2-1/2 INCHES)
|
|
MIL V 24509 : A
|
VALVES, FLANGED, BALL & PLUG FOR SEWAGE & SEA WATER SERVICE
|
|
MIL-B-18558 Revision B:1988
|
Bearing, Propulsion Line Shaft, Oil Disc Lubricated
|
|
MIL-DTL-1189 Revision E:2018
|
VALVE, GATE, BRONZE
|
|
DOD-STD-2185 Base Document:1986
|
REQUIREMENTS FOR REPAIR AND STRAIGHTENING OF BRONZE NAVAL SHIP PROPELLERS
|
|
MIL F 24787/6 : 0
|
FITTINGS, END TYPE U, 180 DEGREES RETURN, HOSE TO HOSE, REUSABLE FOR FLEXIBLE HOSE ASSEMBLIES
|
|
MIL-E-23765-3 Revision A:1986
|
ELECTRODE, AND RODS - WELDING, BARE, SOLID COPPER ALLOY
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.