|
SAE J 1086 : 2012
|
NUMBERING METALS AND ALLOYS |
|
DOD V 24657 : 0
|
VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
|
MIL G 24716 : A
|
GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND |
|
ASME B16.34 : 2017
|
VALVES - FLANGED, THREADED, AND WELDING END |
|
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
|
MIL DTL 1222 : J
|
STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
|
MIL DTL 901 : E
|
SHOCK TESTS, H.I. (HIGH-IMPACT) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR |
|
MIL R 17131 : C
|
RODS AND POWDERS, WELDING, SURFACING |
|
MIL P 24503 : B
|
PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
|
NAVSEA T9074 AS GIB 010/271 : 0
|
REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
|
SAE AS 15003 : 2009
|
FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, 1/8 PIPE THREADS, STEEL, TYPE 3 |
|
MIL P 24583 : B
|
PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
|
MSS SP 25 : 2013
|
STANDARD MARKING SYSTEM FOR VALVES, FITTINGS, FLANGES, AND UNIONS |
|
NAVSEA S9074 AR GIB 010/278 : 0
|
REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
|
ASME B16.20 : 2012
|
METALLIC GASKETS FOR PIPE FLANGES |
|
MSS SP 61 : 2013
|
PRESSURE TESTING OF VALVES |
|
ASTM A 217/A217M : 2014 : REDLINE
|
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
|
SAE AS 35411 : 2010
|
FITTINGS, LUBRICATION |
|
MIL STD 1472 : G
|
HUMAN ENGINEERING |
|
ASTM A 105/A105M : 2014-11
|
SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
|
MIL P 15024/5 : 0
|
PLATE, IDENTIFICATION |
|
MIL HDBK 470 : A
|
DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1 |
|
ASTM F 2168 : 2013 : REDLINE
|
Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
|
MIL DTL 15024 : F
|
PLATES AND TAGS FOR IDENTIFICATION OF EQUIPMENT, GENERAL SPECIFICATION FOR |
|
ASTM A 515/A515M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
|
ASTM A 312/A312M : 2017-03
|
SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
|
MSS SP 91 : 2009
|
GUIDELINES FOR MANUAL OPERATION OF VALVES |
|
MIL-STD-167-1A : 2005
|
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
|
MIL DTL 24696 : C
|
GASKET, SHEET, NON-ASBESTOS |