|
SAE AMS 2404 : 2013
|
PLATING, ELECTROLESS NICKEL
|
|
MIL-DTL-5624 Revision W:2016
|
TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
|
|
SAE AS 81021 : 2016
|
COPPER-BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510), STRIP
|
|
SAE AMS 2402 : 2013
|
PLATING, ZINC
|
|
ASTM G 21 : 2015 : REDLINE
|
Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
|
|
MIL-PRF-5606 Revision H:2002
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
|
|
ASTM D 4067 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
|
|
ASTM E 595 : 2015 : REDLINE
|
Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
|
|
SAE AMS QQ A 200/8 : 2015
|
ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061
|
|
SAE AMS QQ N 290 : 2015
|
NICKEL PLATING (ELECTRODEPOSITED)
|
|
IPC J STD 006 : C
|
REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS
|
|
IPC J STD 004 : B
|
REQUIREMENTS FOR SOLDERING FLUXES
|
|
MIL-STD-889 Revision C:2016
|
DISSIMILAR METALS
|
|
MIL-PRF-87257 Revision C:2017
|
HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
|
|
MIL-DTL-5541 Revision F:2006
|
Chemical Conversion Coatings on Aluminum and Aluminum Alloys
|
|
SAE AMS R 25988 : 1998
|
RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
|
|
IPC J STD 005 : A
|
REQUIREMENTS FOR SOLDERING PASTES
|
|
ANSI/NCSL Z540 1 : 94(R2002)
|
CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
|
|
ASTM D 5138 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
|
|
ASTM B 567 : 1998
|
Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method
|
|
MIL-PRF-23699 Revision G:2014
|
Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
|
|
MIL-STD-790 Revision G:2011
|
ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
|
|
SAE AMS QQ A 225 : 2012
|
ALUMINUM AND ALUMINUM ALLOY, BAR, ROD, WIRE OR SPECIAL SHAPES; ROLLED, DRAWN OR COLD FINISHED; GENERAL SPECIFICATION FOR
|
|
ASTM B 194 : 2015 : REDLINE
|
Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
|
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS
|
|
SAE AMS5640V:2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING
|
|
MIL-M-24519 Revision E:1992
|
MOLDING PLASTICS, POLYESTER AND POLYARYLETHER THERMOPLASTIC
|
|
MIL-STD-202 Revision H:2015
|
ELECTRONIC AND ELECTRICAL COMPONENT PARTS
|
|
ASTM B 241/B241M : 2016 : REDLINE
|
Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
|
|
SAE AMS QQ A 200 : 2004
|
ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR
|
|
SAE AS 39029 : 2017
|
CONTACTS, ELECTRICAL CONNECTOR, GENERAL SPECIFICATION FOR
|
|
MIL-STD-1285 Revision D:2004
|
MARKING OF ELECTRICAL AND ELECTRONIC PARTS
|
|
ASTM A 342/A342M : 2014 : REDLINE
|
Standard Test Methods for Permeability of Weakly Magnetic Materials
|
|
FED-STD-H28 Revision A:1994
|
Screw-Thread Standards for Federal Services
|
|
ASTM D 570 : 1998 : R2018
|
Standard Test Method for Water Absorption of Plastics
|
Important note : All end users must be registered with an Account prior to user licenses being assigned.