|
SAE AMS 5689 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, WIRE 18CR - 10.5NI - 0.40TI (321) SOLUTION HEAT TREATED |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
SAE AMS 5645 : 2016
|
STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
|
SAE AS 611F : 2010
|
HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR |
|
ASTM A 262 : 2015 : REDLINE
|
Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels |
|
MS 33786 : B
|
FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL |
|
SAE AMS 4115 : 2015
|
ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) |
|
NAS 1760 : 0
|
FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR |
|
SAE AMS 4120 : 2002
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
|
MIL PRF 7808 : L
|
LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
|
ANSI/NCSL Z540 3 : 2006(R2013)
|
REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
|
MIL PRF 5606 : H
|
HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
|
SAE AMS 5643 : 2016
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
|
SAE AS 4395 : 2013
|
FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD |
|
SAE AMS 5743 : 2014
|
STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED |
|
SAE AMS 5697 : 2012
|
STEEL, CORROSION-RESISTANT, WIRE, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
|
MIL DTL 32435 : 0
|
HOSE, POLYTETRAFLUOROETHYLENE, CONVOLUTED, 450 DEGREES F, MEDIUM PRESSURE |
|
SAE AMS QQ A 200/8 : 2015
|
ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061 |
|
SAE AMS WW T 700/4 : 2012
|
TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 5052 |
|
SAE AS 1055 : 2013
|
FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS |
|
SAE AMS A 22771 : 2012
|
ALUMINUM ALLOY FORGINGS, HEAT TREATED |
|
SAE AMS QQ A 225/4 : 2017
|
ALUMINUM ALLOY, 2014, BAR, ROD, WIRE AND SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS WW T 700/6C : 2001(S2015)
|
TUBE, ALUMINUM ALLOY, DRAWN, SEAMLESS, 6061 |
|
MIL DTL 27272 : D
|
FITTINGS, POLYTETRAFLUOROETHYLENE HOSE, HIGH-TEMPERATURE, MEDIUM-PRESSURE, GENERAL SPECIFICATION FOR |
|
SAE AMS 5647 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
|
MIL PRF 680 : C
|
DEGREASING SOLVENT |
|
SAE AMS 5566 : 2011
|
STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304) HIGH PRESSURE, COLD DRAWN |
|
SAE ARP 908 : 2013
|
TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING |
|
MIL PRF 87257 : C
|
HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
|
SAE AMS 5567 : 2015
|
STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
|
SAE AS 8879 : 2004
|
SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
SAE AMS 4117 : 2015
|
ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651) |
|
SAE AMS 4127 : 2012
|
ALUMINUM ALLOY, FORGINGS AND ROLLED OR FORGED RINGS, (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
ASTM A 493 : 2016 : REDLINE
|
Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
|
SAE AS 2078 : 2015
|
TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
|
MIL DTL 25579/1 : 0
|
HOSE ASSEMBLY LENGTH MEASUREMENT FOR NAS 1760 AND MS 8000 SERIES SEAL, (GLOBE SEAL, OR RADIUS SEAL) TO FLARELESS FITTING END DESIGN |
|
SAE AMS 2700E : 2011
|
PASSIVATION OF CORROSION RESISTANT STEELS |
|
MIL PRF 83282 : D
|
HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
SAE AS 1946 : 2015
|
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, UP TO 1500 PSI AND 450 DEGREES F, HYDRAULIC AND PNEUMATIC |
|
SAE AS 33514 : 2015
|
FITTING END, STANDARD DIMENSIONS FOR FLARELESS TUBE CONNECTION AND GASKET SEAL |
|
SAE AMS 4082 : 2014
|
ALUMINUM ALLOY, SEAMLESS DRAWN TUBING, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED |
|
SAE AS 4375 : 2013
|
FITTING END, FLARELESS, DESIGN STANDARD |
|
SAE AMS QQ A 225/6 : 1998
|
ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AS 5685 : 2015
|
STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED |
|
ASTM D 471 : 2016-02
|
TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
|
SAE AMS 5565L : 2013
|
STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
|
SAE AMS 5557 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED |