MIL-DTL-3950 Revision K:2016
Current
Current
The latest, up-to-date edition.
Switches, Toggle, Environmentally Sealed, General Specification for
Available format(s)
PDF
Published date
29-02-2016
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - Procedure for Qualification
Inspection - Mounting and Terminal
Hardware
APPENDIX B - DC INDUCTOR CALIBRATION PROCESS
Describes the requirements for environmentally sealed toggle switches.
This specification covers the requirements for environmentally sealed toggle switches.
| DevelopmentNote |
Supersedes MIL S 3950 (F) (01/2004)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MS27785 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-2726 Revision C:2006 | RECEPTACLE, RECEPTACLE PLUGS, SWITCH AND RECEPTACLES, AND OUTLETS (ELECTRICAL), GENERAL SPECIFICATION FOR |
| MIL-DTL-3950-16 Revision A:2008 | SWITCHES, TOGGLE, THREE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS27407 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED |
| MS27734 Revision E:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MS27409 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27784 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MIL-DTL-5423-17 Base Document:2010 | Boot, Dust and Water Seal, Bushing Seal, Type A Style 10 (Panel Seal Only)<br> |
| MIL HDBK 1132 : 0 | SWITCHES, SELECTION AND USE OF |
| MS27724 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS24659 Revision G:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MIL-DTL-3950-15 Revision A:2008 | SWITCHES, TOGGLE, DOUBLE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS24524 Revision K:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED |
| MS24660 Revision G:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27788 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27783 Revision D:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27737 Revision G:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER-LOCK, SOLDER TERMINAL |
| MS27735 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MIL-DTL-3950-17 Revision A:2008 | SWITCHES, TOGGLE, FOUR POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS27787 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27786 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS24523 Revision J:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED |
| MS27723 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS27782 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS24525 Revision K:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED |
| MS24658 Revision G:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MIL-DTL-5423-16 Revision E:2009 | BOOT, DUST AND WATER SEAL, BUSHING SEAL, TYPE A (FOR TOGGLE SWITCH 0.469 DIAMETER) STYLE 10 (PANEL BUSHING SEAL ONLY) |
| MS27408 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27789 Revision D:2005 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MIL-HDBK-525 Base Document:2013 | ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) INTEGRITY PROGRAM |
| MS27406 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED |
| MS27736 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | METHOD 210, RESISTANCE TO SOLDERING HEAT |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| MIL-STD-202-101 Base Document:2015 | METHOD 101, SALT ATMOSPHERE (CORROSION) |
| MIL-STD-202-311 Base Document:2015 | METHOD 311, LIFE, LOW LEVEL SWITCHING |
| MIL-PRF-15160-2 Revision J:2014 | Fuses, Instrument, Power, and Telephone (Nonindicating), Style F02 |
| MIL-STD-202-107 Base Document:2015 | METHOD 107, THERMAL SHOCK |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-STD-202-106 Base Document:2015 | METHOD 106, MOISTURE RESISTANCE |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| MIL-STD-202-301 Base Document:2015 | METHOD 301, DIELECTRIC WITHSTANDING VOLTAGE |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AS 50861 : 2011 | WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-310 Base Document:2015 | METHOD 310, CONTACT-CHATTER MONITORING |
| MIL-STD-202-110 Base Document:2015 | METHOD 110, SAND AND DUST |
| MIL-STD-202-105 Base Document:2015 | METHOD 105, BAROMETRIC PRESSURE (REDUCED) |
| MIL-STD-202-208 Base Document:2015 | METHOD 208, SOLDERABILITY |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-204 Base Document:2015 | METHOD 204, VIBRATION, HIGH FREQUENCY |
| MIL-STD-202-213 Base Document:2015 | METHOD 213, SHOCK (SPECIFIED PULSE) |
| MIL-STD-202-307 Base Document:2015 | METHOD 307, CONTACT RESISTANCE |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.