INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR

Amended by

MIL-DTL-45910 Revision D Notice 1 - Validation:2020

Available format(s)

PDF

Language(s)

English

Published date

18-06-2015

Publisher

US Military Specs/Standards/Handbooks

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES

Specifies the requirements for locked in inserts.

DevelopmentNote	Supersedes MIL I 45910 (C). (07/2015) NEW CHILD NOT 1 IS ADDED NOW
DocumentType	Standard
Pages	25
ProductNote	NEW CHILD NOT 1 IS ADDED NOW
PublisherName	US Military Specs/Standards/Handbooks
Status	Current
Supersedes	MIL I 45910 : C

SAE AMS 5737 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 6382 : 2014	STEEL, BARS, FORGINGS, AND RINGS 0.95CR - 0.20MO (0.38 - 0.43C) (SAE 4140) ANNEALED
SAE AMS 6349 : 2013	STEEL BARS, 0.95CR - 0.20MO (0.38 TO 0.43C) (SAE 4140), NORMALIZED
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 6931 : 2014	TITANIUM ALLOY BARS, FORGINGS AND FORGING STOCK, 6.0AL - 4.0V, ANNEALED
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
SAE AMS 5734 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C) SOLUTION HEAT TREATED
SAE AMS 5732 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED
NASM1312-6:2013	FASTENER TEST METHODS, METHOD 6, HARDNESS
ASTM E 1417/E1417M : 2016 : REDLINE	Standard Practice for Liquid Penetrant Testing
MS51991 Revision D:2012	INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED
FED-STD-H28-2 Revision B:1991	Screw-Thread Standards for Federal Services Section 2 Unified Inch Screw Threads- UN and UNR Thread Forms
SAE AS 8879 : 2004	SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
MS51993 Revision B:2012	INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH
SAE AMS 5731 : 2012	STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED
MS51995 Revision D:2015	FASTENERS, RING LOCKED INSERTS AND STUDS, INSTALLATION AND REPLACEMENT OF
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2411 : 2013	PLATING, SILVER FOR HIGH TEMPERATURE APPLICATIONS
SAE AS 51997 : 2013	RING, LOCKED, SERRATED-HIGH STRENGTH
SAE AS 51990 : 2016	RING, LOCK, SERRATED
MS51994 Revision A:1988	HOLE PREPARATION - RING LOCKED INSERTS AND STUDS, STANDARD DIMENSIONS FOR
SAE AMS C 8837 : 2015	COATING, CADMIUM (VACUUM DEPOSITED)
SAE AMS QQ A 225/6 : 1998	ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
ASTM B 928/B928M : 2015 : REDLINE	Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
FED-STD-H28-20 Revision B:1994	SCREW THREAD STANDARDS FOR FEDERAL SERVICES, SECTION 20, INSPECTION METHODS FOR ACCEPTABILITY OF UN, UNR, UNJ, M, AND MJ SCREW THREADS
SAE AMS 4967 : 2014	TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS 6.0AL - 4.0V ANNEALED, HEAT TREATABLE
ASTM A 380/A380M : 2017	Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
MIL-PRF-46010 Revision H:2013	LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738