MIL-HDBK-470 Revision A:1997
Current
Current
The latest, up-to-date edition.
DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1
Available format(s)
PDF
Publisher
Foreword
1.0 Scope and Purpose of Handbook
2.0 The Concept of Maintainability
3.0 Objective of a Maintainability Program
4.0 Elements of a Maintainability Program
Appendixes
Figures
Tables
A Department of Defense Handbook covering designing and developing maintainable products and systems, consisting of two volumes.
| Committee |
AREA SESS
|
| DevelopmentNote |
Supersedes MIL STD 470. (07/2004) A NOTICE 1 - Notice of Validation. (07/2007) A NOTICE 2 - Notice of Validation. (06/2012)
|
| DocumentType |
Standard
|
| Pages |
721
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
| MIL-PRF-85676 Revision A:2006 | LIGHTING, EMERGENCY EGRESS, SUBASSEMBLY |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| MIL-PRF-32272 Revision A:2016 | INTEGRATED POWER MANAGEMENT CENTER (IPMC) |
| MIL-PRF-83419 Revision F:2016 | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| SAE ARP 94910 : 2012 | AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR |
| SAE ARP 5120 : 2016 | AIRCRAFT GAS TURBINE ENGINE HEALTH MANAGEMENT SYSTEM DEVELOPMENT AND INTEGRATION GUIDE |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-PRF-17773 Revision D:2015 | SWITCH, BUS TRANSFER, ELECTRIC POWER, AUTOMATIC |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-16036 Revision M:2013 | SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
| AFGS-87219 Revision B:2012 | ELECTRICAL POWER SYSTEMS, AIRCRAFT |
| MIL-DTL-24765 Revision B:2016 | POWER SUPPLY, UNINTERRUPTIBLE, STATIC (NAVAL SHIPBOARD) |
| GEIA HEB 1 : 2005 | HUMAN ENGINEERING - PRINCIPLES AND PRACTICES |
| MIL-DTL-38195 Revision D:2000 | GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE |
| MIL-DTL-32572 Base Document:2017 | Anchor Windlass, Electro-Mechanical, Vertical, Two-Speedand Variable-Speed |
| SAE JA 1010 : 2011 | MAINTAINABILITY PROGRAM STANDARD |
| MIL-DTL-85061 Revision C:2009 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
| MIL-HDBK-115 Revision C:2016 | U.S. ARMY REVERSE ENGINEERING HANDBOOK (GUIDELINES AND PROCEDURES) |
| MIL-HDBK-516 Revision C:2014 | AIRWORTHINESS CERTIFICATION CRITERIA |
| MIL-HDBK-502 Revision A:2013 | Product Support Analysis |
| MIL-PRF-26139 Revision E:2015 | TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1) |
| MIL-DTL-18110 Revision G:2018 | VALVES, GATE TYPE, STEEL SIZES 2[1/2] INCHES TO 16 INCHES |
| MIL-HDBK-338 Revision B:1998 | ELECTRONIC RELIABILITY DESIGN HANDBOOK |
| SAE J 1776 : 2014 | MARINE VEHICLES - HYDRAULIC SYSTEM PUMPS AND MOTORS - DESIGN AND SPECIFICATION GUIDE |
| SAE AIR 5416 : 2016 | MAINTENANCE LIFE CYCLE COST MODEL |
| MIL-DTL-16392 Revision D:2015 | BRAKE, ELECTRO-MECHANICAL, NAVAL SHIPBOARD |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-53078 Revision A:2011 | MOUNTING KIT: M1 TANK CLEARED LANE MARKING SYSTEM (CLAMS) |
| CSA N290.8 : 2015 | TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS |
| SAE AS 94900 : 2007 | AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR |
| JSSG-2010-12 Base Document:1998 | Crew Systems Deployable Aerodynamic Decelerator (DAD) Systems Handbook |
| SAE AS 5356 : 2017 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
| MIL-DTL-24347 Revision C:2015 | MONITOR, AVAILABLE LOAD, 60 AND 400 HERTZ, A.C., 1 PHASE, ELECTRICAL POWER (NAVAL SHIPBOARD USE) |
| MIL-STD-280 Revision A:1969 | DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS |
| IEC 60863:1986 | Presentation of reliability, maintainability and availability predictions |
| MIL-STD-2155 Base Document:1985 | FAILURE REPORTING, ANALYSIS AND CORRECTIVE ACTION SYSTEM |
| DOD STD 2107 : NOTICE 1 | PRODUCT ASSURANCE PROGRAM REQUIREMENTS FOR CONTRACTORS |
| IEEE 762-2006 | IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity |
| IEC 60362:1971 | Guide for the collection of reliability, availability, and maintainability data from field performance of electronic items |
| MIL-HDBK-46855 Revision A:1999 | HUMAN ENGINEERING PROGRAM - PROCESS AND PROCEDURES |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| MIL-STD-2067 Base Document:1978 | AIRCREW AUTOMATED ESCAPE SYSTEMS RELIABILITY AND MAINTAINABILITY (R/M) PROGRAM REQUIREMENTS FOR |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| ARMP-3 : 1998 | LIST AND SOURCE OF NATIONAL AND INTERNATIONAL R&M DOCUMENTS |
| MIL-HDBK-759 Revision C:1995 | HANDBOOK FOR HUMAN ENGINEERING DESIGN GUIDELINES |
| MIL-STD-1761 Base Document:1979 | FASTENER RECESS TEST, METHOD FOR DAMAGE TOLERANCE EVALUATION |
| IEC 60706-3:2006 | Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data |
| SAE ARD 50010 : 1991 | RECOMMENDED RMS TERMS AND PARAMETERS |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| DOD-STD-863 Revision B:1979 | WIRING DATA AND SYSTEM SCHEMATIC DIAGRAMS PREPARATION OF |
| ARMP-5 : 1998 | GUIDANCE ON RELIABILITY AND MAINTAINABILITY TRAINING |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| ARMP-8 : 1991 | RELIABILITY & MAINTAINABILITY (R&M) IN THE PROCUREMENT OF OFF-THE-SHELF (OTS) EQUIPMENT |
| MIL-STD-1388-2 Revision B:1991 | DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD |
| MIL-STD-1388-1 Revision A:1983 | LOGISTIC SUPPORT ANALYSIS |
| IEC 60300-3-2:2004 | Dependability management - Part 3-2: Application guide - Collection of dependability data from the field |
| MIL-HDBK-798 Base Document:1994 | System Engineer\'s Design for Discard Handbook |
| MIL STD 1814 : NOTICE 1 | INTEGRATED DIAGNOSTICS |
| MIL-HDBK-472 Base Document:1966 | MAINTAINABILITY PREDICTION |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE J 1739 : 2009 | POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN DESIGN (DESIGN FMEA), POTENTIAL FAILURE MODE AND EFFECTS ANALYSIS IN MANUFACTURING AND ASSEMBLY PROCESSES (PROCESS FMEA) |
| MIL-HDBK-217 Revision F:1991 | RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT |
| MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
| MIL-HDBK-2165 Base Document:1995 | TESTABILITY PROGRAM FOR SYSTEMS AND EQUIPMENTS |
| SAE HS 2600 : 1999 | MAINTAINABILITY, REPAIRABILITY AND SERVICEABILITY STANDARDS MANUAL |
| IEC 60706-1:1982 | Guide on maintainability of equipment. Part 1 - Sections One, Two and Three. Introduction, requirements and maintainability programme |
| DOD-HDBK-791 Base Document:1988 | MAINTAINABILITY DESIGN TECHNIQUES |
| IEC 60706-2:2006 | Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ARMP-6 : 2008 | GUIDANCE FOR MANAGING IN-SERVICE R&M |
| MIL-STD-962 Revision D:2003 | DEFENSE STANDARDS FORMAT AND CONTENT |
| IEC 60706-5:2007 | Maintainability of equipment - Part 5: Testability and diagnostic testing |
| SAE ARD 50046 : 1993 | RMS INFORMATION SOURCEBOOK |
| MIL-STD-1629 Revision A:1980 | PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS |
| ARMP-1 : 2008 | NATO REQUIREMENTS FOR RELIABILITY AND MAINTAINABILITY |
| MIL-STD-721 Revision C:1981 | DEFINITIONS OF EFFECTIVENESS TERMS FOR RELIABILITY MAINTAINABILITY, HUMAN FACTORS, AND SAFETY |
| SAE AIR4276A:1990(S2011) | COMPUTERIZATION OF RELIABILITY, MAINTAINABILITY AND SUPPORTABILITY (RM&S) IN DESIGN |
| MIL-STD-2173 Base Document:1986 | RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT |
| IEEE 1149.1-2013 REDLINE | IEEE Standard for Test Access Port and Boundary-Scan Architecture |
| IEC 60706-6:1994 | Guide on maintainability of equipment - Part 6: Section 9: Statistical methods in maintainability evaluation |
| ARMP-2 : 1993 | GENERAL APPLICATION GUIDANCE ON THE USE OF ARMP-1 |
| IEC 60706-4:1992 | Guide on maintainability of equipment - Part 4 - Section 8: Maintenance and maintenance support planning |
| MIL-HDBK-2084 Base Document:1995 | GENERAL REQUIREMENTS FOR MAINTAINABILITY OF AVIONIC AND ELECTRONIC SYSTEMS AND EQUIPMENT |
| MIL-HDBK-792 Base Document:1989 | PROVE OUT OF PRODUCTION FACILITIES |
| MIL-STD-1309 Revision D:1992 | DEFINITIONS OF TERMS FOR TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.