MIL-P-116 Revision J:1988
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PRESERVATION, METHODS OF
Available format(s)
PDF
Superseded date
01-10-1996
Publisher
NO CONTENTS SECTION
Specifies methods of preservation to safeguard material against environmental corrosion and deterioration, physical and mechanical damage and other forms of degradation. Provides for routine examination and when specified, test procedures to be used in verifying conformance (unit pack validation) with the requirements contained in this standard. Coverage includes characteristics, changes and applicable documents.
| Committee |
FSC PACK
|
| DevelopmentNote |
Supersedes FED STD 102 (B) (09/2004)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM F 1145 : 2005 : R2011 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| MIL-I-25859 Revision C:1995 | INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED |
| MIL-B-50451 Revision B:1976 | BLASTING MACHINE, M32 PARTS AND ASSEMBLY |
| MIL-C-47224 Revision B:1993 | COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
| MIL-C-53052 Base Document:1985 | CONNECTOR, ELECTRICAL, POWER |
| MIL-F-60037 Revision C:1975 | FLARE SET, AN/ALA-17 ASSEMBLING AND PACKING |
| AA-B-260 Revision F:1975 | BEDSPRING, BOX TYPE |
| MIL-S-52541 Base Document:1966 | SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| MIL C 81984 : B | CARTRIDGE, IMPULSE, MARK 107 MOD 1 |
| MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL-I-27674 Revision C:1994 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE MULTIFUNCTION, MINUS 5O DEG TO PLUS 2OO DEG C |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| MIL-I-8580 Revision B:1965 | INDICATOR, TACHOMETER, HELICOPTER, 0-4000 RPM TYPE MA 1 |
| ASTM F 1567 : 1994 : R2006 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| MIL E 5589 : D | EARPHONE, (EXTENDED RANGE), H-301/U |
| MIL-M-8609 Revision B:1965 | MOTOR, DC 28 VOLT SYSTEM AIRCRAFT, GENERAL SPECIFICATION FOR |
| GGG-G-670 Base Document:1956 | GRASS HOOKS, WHIP GRASS CUTTERS, AND WHIP WEED CUTTERS |
| MIL-A-10894 Revision C:1959 | AMPLIFIER POWER SUPPLY AM-598( )/U |
| MIL-S-23665 Revision B:1968 | SONOBUOY, DETECTION DEVICES, PRESERVATION, PACKAGING AND PACKING, PROCEDURES FOR |
| MIL G 2145 : A NOTICE 1 | GENERATOR SET, GASOLINE ENGINE DRIVEN, DIRECT AND ALTERNATING CURRENT [NAVAL SHIPBOARD USE] |
| DOD-S-87956 Base Document:1979 | SHELTER, S-80A AND S-82A |
| MIL-R-83372 Base Document:1972 | RELAY, ELECTROMAGNETIC, HYBRID, EMI SUPPRESSED, GENERAL SPECIFICATION FOR |
| MIL-R-38370 Revision B:1972 | RECORDING SET, FLIGHT DATA A/A24U-10 |
| MIL-S-55689 Base Document:1969 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778()/GRC |
| MIL-A-38307 Revision A:1981 | ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7 |
| MIL-T-38034 Revision E:1970 | TIMER, FIRE CONTROL, BOMBING, DUAL |
| MIL-P-52281 Revision B:1978 | PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES |
| MIL P 51529 : 0 | PACKAGING OF DECONTAMINATING AGENT |
| MIL-C-1173 Revision E:1976 | CART, GENERAL HAULING |
| MIL-F-45216 Revision A:1984 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| MIL-A-52568 Revision C:1982 | AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR |
| MIL STD 1427 : A NOTICE 1 | ACTIVATED DESICCANTS (METRIC) |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| MIL-P-81655 Base Document:1970 | PITOT STATIC TUBE, L-SHAPED, COMPENSATED, ELECTRICALLY HEATED, GENERAL SPECIFICATION FOR |
| MIL C 48683 : A | CARTRIDGE, 40MM, M918 TP; PROJECTILE ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| MIL-P-11520 Revision F:1989 | PRESERVATIVE COATING, RUBBER, FOR RUBBER SURFACES |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| MIL-D-63370 Base Document:1981 | DISPENSER, MINE GROUND VEHICLE, M128 PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL P 21454 : 0 | POWER SUPPLIES, METALLIC RECTIFIER, CATHODIC PROTECTION, RESERVE FLEET |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-J-87250 Base Document:1988 | JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER |
| GGG-M-125-7 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PESTICIDES AND ORGANIC VAPORS) |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-B-63094 Revision B:1978 | BLASTING MACHINE, 50 CAP, M34 |
| MIL C 24231 : D | CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-I-22598 Revision B:1989 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET SIZE BS-5 |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| MIL-P-24377 Revision A:1982 | PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED |
| MIL-T-23759 Revision D:1989 | TANK, ASPHALT STORAGE, WHEEL MOUNTED |
| MIL-A-55674 Revision A:1969 | ANTENNA GROUP AN/TRA-37() |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL-C-10479 Revision B:1969 | CRYSTAL IMPEDANCE METER TS 683/TSM |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-R-10879 Revision D:1958 | RADIOSONDE BASELINE CHECK SET AN/GMM-1 (COMPONENTS OF) |
| MIL-G-52859 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 400 HERTZ, PU-760/M |
| MIL T 14387 : A | TEST SET, RADAR AN/UPM-60() |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL S 24317 : 0 | SWITCH, MULTI-STATION, PUSHBUTTON (ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| MIL-H-43905 Revision C:1990 | HASP, HIGH SECURITY PADLOCKS |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL-C-24495 Base Document:1973 | CHAIR, STACKING, STEEL, NAVAL SHIPBOARD USE |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| MIL G 18474 : 0 | GENERATORS AND MOTORS, ALTERNATING CURRENT, NAVAL SHIP PROPULSION |
| MIL-C-50288 Base Document:1970 | CABLE ASSEMBLIES FOR WAR RESERVE ATOMIC DEMOLITION CHARGES, GENERAL SPECIFICATION FOR |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL-R-10761 Revision A:1962 | ROTARY CONVERTER (MOTOR GENERATOR) PU 134 ()/U, PU 140 ()/U, PU 141()/U & PU 143 ()/U |
| MIL-T-13420 Revision A:1959 | TELEPHONE SET TA 264() PT |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| MIL-T-21677 Base Document:1958 | TEST SET MARK 3 MOD 2 |
| MIL-G-17713 Revision D:1988 | GAGES, LIQUID LEVEL MEASURING, TANK |
| MIL-S-55234 Base Document:1963 | STANDING WAVE RATIO-POWER METER, ME-165 ( )/G |
| MIL-C-13766 Revision C:1983 | CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005 |
| MIL-I-7062 Revision C:1975 | INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR |
| MIL-I-7065 Revision A:1976 | INDICATOR, POSITION, AILERON TRIM TAB |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL-I-82812 Base Document:1989 | IGNITION STRANDS |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| DOD-B-24559 Base Document:1977 | BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC) |
| SAE AS 7997:1999 | MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR |
| MIL-D-13670 Revision C:1975 | DETONATOR, STAB, M63 PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-S-50899 Base Document:1971 | SPACER |
| MIL-W-48105 Base Document:1972 | WASHER |
| MIL-F-50407 Revision A:1973 | FUZE, ROCKET, M412A1 ASSEMBLING AND PACKING |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-L-53106 Base Document:1990 | LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED |
| MIL-I-82847 Base Document:1990 | IGNITION COMPOUND, MAGNESIUM-POLYTETRAFLUOROETHYLENE |
| MIL-M-24476 Revision B:1993 | MOUNT, RESILIENT, TYPES 7M5O, 6M15O, 6M45O AND 6M9OO |
| MIL-T-17585 Revision C:1983 | THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE |
| MIL-R-22368 Revision D:1980 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS AND BOATS |
| MIL-P-55213 Base Document:1963 | POWER SUPPLY PP-1588 ( ) MPQ-4A |
| MIL-T-21684 Base Document:1958 | TEST SET MARK 96 MOD 1 |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| J-W-1177 Revision B:1988 | WIRE, MAGNET, ELECTRICAL, GENERAL SPECIFICATION |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-A-11755 Revision E:1994 | ANTIFREEZE, ARCTIC-TYPE |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| MIL-H-24776 Base Document:1992 | HYDRAZINE TEST KIT, NAVAL SHIPBOARD |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-R-46837 Revision B:1990 | RACEWAY, STEEL, RIGID |
| MIL-B-13656 Revision B:1964 | BINOCULAR, M15A1 AND M17A1 |
| MIL-C-38392 Revision A:1969 | COMPRESSOR, HERMETIC, AIR CONDITIONING, GENERAL SPECIFICATION FOR |
| MIL A 23798 : C | AIR CONDITIONER, FAN-COIL ASSEMBLY |
| MIL C 0017124 : D | CORD, DETONATING |
| MIL W 5521 : B | WASHER, AIRCRAFT HYDRAULIC PACKING BACK UP |
| MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| MIL-V-82466 Base Document:1967 | VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM |
| MIL-P-15280 Revision J:1988 | PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES) |
| MIL-S-52836 Revision A:1974 | SUPPLEMENTARY SET, BRIDGE, TROOP SUPPORT, PACKAGING OF |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| MIL A 87136 : NOTICE 1 | ANTENNAS, AIRBORNE GENERAL SPECIFICATION FOR |
| MIL-T-83460 Base Document:1975 | TRANSDUCER, MOTIONAL PICKUP TRU-164/A |
| MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
| MIL-R-81202 Revision D:1981 | RECEIVER ASSEMBLY, NITROGEN, FOR LAU-7 SERIES LAUNCHERS |
| MIL-I-83152 Revision B:1974 | INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER) |
| MIL I 7627 : F | INDICATOR, TURN AND SLIP 28V DC |
| MIL D 9129 : D | DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR |
| MIL-P-53124 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| MIL-I-7721 Revision D:1992 | INDICATOR, VERTICAL SPEED, 3-INCH |
| MIL-G-52557 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5 KW 60 HERTZ PU-620M |
| MIL-P-25621 Revision B:1974 | PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| MIL-C-87230 Revision A:1989 | Coveralls, Flyer\'s, CWU-64/P (No S/S Document) |
| MIL-C-48887 Base Document:1976 | CHARGE, PROPELLING, PA500, FOR MINE M16 |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-C-22362 Revision D:1986 | CARTRIDGE, IMPULSE, MK 18 MOD O |
| MIL-C-82891 Base Document:1993 | CARTRIDGE, IMPULSE, MARK 14 MOD 1 |
| MIL-C-51211 Revision B:1967 | CALCULATOR, DOWNWIND TOXIC VAPOR HAZARD, POINT SOURCE, ABC-M2 |
| MIL-L-28654 Revision C:1988 | LIFTING, LAUNCHING AND SIDE CARRYING EQUIPMENT FOR PONTOONS ON 1179 CLASS LST VESSELS |
| MIL-L-7768 Revision B:1981 | LIGHT, DESK, AIRCRAFT |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-T-26561 Revision C:1984 | TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE |
| GG-F-00336 Revision G:1976 | FILE AND REAMER, PULP CANAL, DENTAL, STANDARDIZED |
| MIL M 28837 : 0 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-P-52854 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 30 KW, 50/60 HERTZ, AN/MJQ-10A |
| MIL I 25688 : A | INDICATOR, ELECTRICAL TACHOMETER ERU-3/A. CRANKSHAFT SPEED 500-4,000 RPM, 3 1/4 INCH SIZE |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
| MIL-C-81703 Base Document:1971 | CONNECTOR, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| MIL H 26626 : D | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN |
| MIL-A-5885 Revision D:1987 | ACCELEROMETER, AIRCRAFT |
| MIL-I-27677 Revision E:1990 | INDICATOR, LIQUID OXYGEN QUANTITY |
| MIL M 5794 : B | MICROPHONE, UNIT M 6A/UR AND MICROPHONE CARBON M 51/UR |
| MIL-C-3131 Revision F:1995 | CORDAGE, PACKING OF |
| MIL-M-49199 Revision A:1985 | MICROPHONE, LINEAR M-162/AIC GENERAL SPECIFICATIONS FOR |
| MIL D 83320 : 0 | DETECTOR, MAGNETIC AZIMUTH DSU-14/A |
| MIL C 38214 : B | COMPASS, MAGNETIC,MOUNTED |
| MIL-H-18158 Revision E:1990 | HOSE ASSEMBLY, AIR DUCT, LOW PRESSURE, FABRIC, WIRE STIFFENED, RETRACTABLE, NAVAL SHIPBOARD PORTABLE VENTILATING SET USE |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-T-5483 Revision D:1964 | TRANSMITTER, PRESSURE, SYNCHRO AIRCRAFT 165 DEGREE MOVEMENT |
| MIL-D-19399 Base Document:1956 | DRIVE, ANTENNA, PATTERN CONTROL, FOR AS-473/ASB-1 (BOARD DRAWINGS 776376, 776520) |
| MIL-M-50559 Base Document:1971 | MODULE ASSEMBLIES, FIRING AND SAFING, TRAINING |
| MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
| MIL-F-8839 Revision A:1988 | FITTING, LUBRICATION, DRIVE TYPE |
| MIL-M-15071 Revision H:1991 | MANUAL, TECHNICAL, EQUIPMENTS AND SYSTEMS CONTENT REQUIREMENTS FOR |
| MIL-T-21669 Base Document:1958 | TEST SET, MARK 25 MOD 1 |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| MIL-C-27298 Revision B:1980 | CLOCK, AIRCRAFT, MECHANICAL ABU AND 9-A |
| MIL-B-49436 Revision B:1993 | BATTERIES, RECHARGEABLE, NICKEL CADMIUM, SEALED |
| MIL-D-60095 Base Document:1964 | DETONATOR, ELECTRIC, XM65 LOADING, ASSEMBLING & PACKING |
| MIL-B-81502 Revision B:1980 | BATTERY, SILVER ZINC ALKALI, GEN |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL A 52512 : A NOTICE 1 | AIR CONDITIONERS: VERTICAL, COMPACT 6,000 BTU/HR |
| MIL-T-38473 Revision A:1972 | TIMER, PRECISION, BOMBING, 0 - 30 MINUTES |
| MIL M 17508 : F | MOUNTS, RESILIENT: TYPES 6E100, 6E150, 7E450, 6E900, 6E2000, 5E3500, 6E100BB, 6E150BB, 7E450BB, AND 6E900BB |
| MIL R 39002 : 0 | RESISTOR, VARIABLE, WIREWOUND, SEMI PRECISION, GENERAL SPECIFICATION FOR |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-R-12540 Revision B:1967 | RECTIFIER, METALLIC RA-91 |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MIL-B-53081 Base Document:1988 | BERM LINER ASSEMBLIES |
| MIL-T-22047 Base Document:1959 | TEST SET MARK 27 MOD 1 |
| MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
| MIL-S-27447 Revision A:1976 | SURVIVAL KIT, PARACHUTE PACK SRU-16/P |
| MIL-T-52956 Revision A:1984 | TEST SET, POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-427 |
| MIL E 85726 : A | ENCLOSURE, STANDARD AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-A-38140 Revision B:1977 | ALTIMETER, PRESSURE AAU-16/A |
| MIL-B-14075 Revision B:1975 | BAG, COOPER'S TOOLS |
| MIL B 81757 : C | BATTERIES & CELLS STORAGE, NICKEL CADMIUM, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL C 27536 : B | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL H 81014 : A NOTICE 1 | HOOK, HELICOPTER, EXTERNAL CARGO, 20,000 POUND CAPACITY, TYPE C |
| MIL-C-0010244 Revision H:1978 | CRYPTOGRAPHIC EQUIPMENT DESTROYER INCENDIARY, TH4, M2A1 |
| MIL-C-27505 Revision B:1967 | Cartridge, Engine Starter MXU-4A/A |
| MIL-G-25597 Revision D:1973 | GYROSCOPE, DISPLACEMENT, ROLL AND PITCH, TYPE MD-1 |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL-E-82803 Base Document:1989 | EXPLOSIVE, THIN LAYER |
| DOD D 23443 : B | DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-S-81238 Base Document:1965 | SODIUM DIOCTYL SULFOSUCCINATE |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| MIL-B-28635 Revision D:1990 | BOOKSHELF FOR BUNK BED |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| MIL-H-12240 Revision A:1958 | HYDROMETER, SYRINGE, BATTERY TS-765()/U |
| MIL B 0043998 : C | BATH UNIT, AUTOMATED, MULTI-HEAD |
| MIL-B-8568 Revision B:1967 | BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG] |
| MIL S 25879 : C | SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A |
| MIL R 62220 : B | RECOVERY VEHICLE, FULL TRACKED, MEDIUM, M88A1, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL A 49295 : 0 | ANTENNA GROUP OE-303 ()/GRC |
| MIL-A-49067 Revision A:1984 | Air Traffic Control Central AN/TSW-7A (No S/S Document) |
| MIL-M-29355 Base Document:1975 | MANUAL, TECHNICAL, OPERATION AND MAINTENANCE INSTRUCTIONS FOR OPERATORS OF VARIOUS TYPES OF EQUIPMENT PREPARATION OF |
| A-B-2787 Base Document:1992 | BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE) |
| MIL A 45564 : 0 | ASSAULT VEHICLE, FULL TRACKED, AMPHIBIOUS, XM733; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-27305 Revision C:1987 | TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ |
| MIL-P-70456 Revision C:1989 | PROPELLANT, STICK, M31A1E1 FOR USE IN CHARGE PROPELLING M203A1 |
| MIL-T-24103 Base Document:1964 | THERMOMETER, SELF INDICATING, 5 INCH SCALE SIZE, LIQUID IN GLASS, MERCURY |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL-S-37438 Base Document:1976 | STIRRING BAR SET, MAGNETIC |
| MIL-D-46256 Revision B:1973 | DETONATOR STAB M24 - PARTS FOR, & LOADING, ASSEMBLING & PACKING |
| MIL-A-22847 Base Document:1961 | AIR REFUELING STORE SYSTEM; D-704 |
| SS-C-661 Revision A:1974 | CRAYON, MARKING |
| MIL-B-55298 Base Document:1965 | BAROGRAPH ML-563 /UM |
| MIL E 75 : H | ELECTRON TUBES PACKING OF |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL R 1229 : C | RUBBER SHEET PACKING, SOLID, WIRE CLOTH INSERTED, SYMBOL, 2354 |
| MIL-G-16959 Revision B:1967 | GASKET, METALLIC, BOILER, ECONOMIZER AND SUPERHEATER HANDHOLE |
| MIL-R-22628 Base Document:1964 | RESIN, CASTING, EPOXY, ALUMINUM FILLED |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL C 39028 : C | CAPACITORS, PACKAGING OF |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL C 62015 : F NOTICE 1 | CARRIER, CARGO, FULL-TRACKED, M548 AND N548A1; AND CARRIER, ELECTRONIC WARFARE SYSTEMS, FULL-TRACKED SHIPMENT OF |
| MIL-S-46383 Revision B:1970 | STRAP, WRIST: INSTRUMENT |
| MIL C 55661 : B | CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837 ( )/U |
| MIL-A-55671 Revision A:1970 | ANTENNA AS-1425 ()/GRC |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-P-22296 Revision B:1973 | PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN) HEAVY WALLED |
| MIL-T-55402 Base Document:1974 | TRANSMITTER GROUP, SIMULATED RADIAC, HOT SPOT OT-52( )/T |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL-D-3898 Revision B:1985 | Drafting Machine and Scales General Specification for |
| MIL-B-45389 Revision A:1979 | BULLDOZER, EARTH MOVING: TANK MOUNTING, M9; PREPARATION FOR STORAGE AND SHIPMENT OF |
| SAE AS 8905 : 2012 | FITTINGS AND CARGO RINGS, TIE-DOWN, AIRCRAFT FLOOR |
| PPP-S-760 Revision B:1973 | STRAPPING, NONMETALLIC, (AND CONNECTORS) |
| MIL-C-12103 Revision C:1963 | COMPUTER, STADIA, CIRCULAR SCALE |
| MIL-B-40028 Revision B:1976 | BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS |
| HH-G-101 Revision E:1990 | GASKET, METALLIC-ENCASED |
| MIL-B-21442 Revision B:1963 | BATTERY, STORAGE, NICKEL-CADMIUM |
| MIL-G-51491 Revision A:1986 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A4 |
| MIL-S-38160 Revision B:1968 | Selector, Antenna C-4808/ARC |
| GGG-P-463 Revision C:1973 | PLATE, SURFACE, (GRANITE) |
| MIL P 83497 : A | PROCEDURES FOR PREPARATION OF PROGRAMMED TAPES AND CARDS |
| MIL I 15379 : B NOTICE 1 | MILITARY SPECIFICATION - INHALATOR, DIVERS, FOR ADMINISTERING HELIUM OXYGEN DURING DECOMPRESSION |
| MIL-H-3280 Revision E:1990 | HOIST, CHAIN, MANUALLY OPERATED, PACKAGING OF |
| MIL-A-82690 Base Document:1980 | ARMING-FIRING DEVICE, ROCKET MOTOR, MARK 28 MOD 0 |
| MIL-P-584 Revision B:1967 | |
| MIL I 7231 : B | INDICATOR, TRUE AIRSPEED, SYNCHRO REPEATER TYPE N 1 |
| MIL-I-81186 Base Document:1966 | INDICATOR, RATE OF FUEL FLOW SYNCHRO TYPE, M590360 |
| MIL-R-19558 Revision A:1960 | REGULATOR, AIR, DEMAND, DIVER'S |
| MIL-M-7255 Revision B:1969 | MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1 |
| MIL-B-85667 Revision A:1991 | BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD GENERAL SPECIFICATION FOR |
| GG M 181 : D | MEASURER, MAP |
| MIL-M-6867 Revision C:1969 | MAGNETIC INSPECTION UNITS |
| MIL T 2118 : 0 | TRAP, STEAM, THERMOSTATIC, NAVAL SHIPBOARD USE |
| MIL-P-83310 Base Document:1971 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| MIL-I-21206 Revision B:1960 | INDICATOR, RATE OF FLOW, FUEL; EFU-7/A (300-5000-15000 PPH) |
| MIL-S-12991 Revision B:1971 | SURVEYING SET, TOPOGRAPHIC COMPANY, PACKAGING OF |
| MIL-I-27709 Revision A:1962 | INDICATOR, ATTITUDE ARU-14/A, REMOTE |
| MIL T 55248 : A | TEST SET, TELETYPEWRITER AN/UGM-1 ( ) |
| MIL I 47204 : 0 | INVERTER, POWER, STATIC |
| MIL-S-52548 Revision A:1975 | SURVEYING SET, TRIANGULATION, PRINCIPAL OBSERVER AND SIGNAL TENDER PACKAGING OF |
| MIL-E-5627 Revision B:1965 | EXTINGUISHERS, FIRE, CARBON DIOXIDE, PORTABLE |
| MIL-S-81246 Revision A:1988 | STABILIZER, ORGANIC-TIN-SULFUR |
| MIL-M-17556 Base Document:1953 | MOTOR, DIRECT CURRENT, FRACTIONAL HP (SHIPBOARD USE) |
| MIL G 52886 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60 KW, 400 HERTZ, PU-707 A/M |
| MIL-P-9024 Revision G:1972 | PACKAGING, MATERIALS HANDLING AND TRANSPORTABILITY, SYSTEM AND SYSTEM SEGMENTS GENERAL SPECIFICATION FOR |
| MIL-B-13164 Revision A:1973 | BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN |
| MIL-M-38706 Revision A:1984 | MULTIMETER |
| MIL-S-13224 Revision A:1959 | SURVEYING SET, SUPPLEMENTARY EQUIPMENT TOPOGRAPHIC BATTALION: SET NO. 15 PACKAGING OF |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL F 55171 : A | FREQUENCY METER AN/USM-159()/U |
| MIL P 83207 : B | PITOT STATIC TUBE, NOSE BOOM, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL T 5780 : D NOTICE 1 | TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY |
| MIL W 87893 : A | WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL |
| MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
| MIL T 24487 : A | TILE, RUBBER VIBRATION DAMPING, TYPE MIRL NO. 3 |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| SAE AS 6451 : 2013 | SHIELDS, PROTECTIVE, AIRCRAFT AND MISSILES |
| GG-S-745 Revision A:1956 | STAPLERS AND STAPLES, PAPER FASTENING, OFFICE TYPE |
| MIL P 49080 : A | POWER SUPPLY PP-6224( )/U |
| MIL-T-26922 Revision D:1977 | TEST SET, ELECTRICAL POWER A/M24T-8() |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-C-27845 Revision C:1977 | COVERALLS, MEN'S, CMU-3/P |
| MIL-P-6457 Revision E:1974 | POWER SUPPLY, METALLIC RECTIFIER TYPE, GENERAL SPECIFICATION FOR |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| MIL C 8087 : C | CORE MATERIAL, FOAMED IN PLACE, URETHANE TYPE |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER, (UNDERGROUND CONNECTED) |
| MIL T 8878 : D | TURNBUCKLE, POSITIVE SAFETYING |
| MIL T 781 : D | TERMINAL, WIRE ROPE, SWAGING |
| MIL-W-50258 Revision A:1971 | WARHEAD SECTION, 762MM ROCKET, PRACTICE: M38 METAL PARTS FOR |
| MIL V 85855 : 0 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL |
| MIL-T-7305 Revision C:1987 | TRANSMITTER, PRESSURE TORQUE TYPE D 5 |
| MIL-S-16104 Revision B:1983 | |
| MIL-P-53125 Base Document:1992 | POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL-A-29247 Base Document:1986 | AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-STD-1816 Base Document:1992 | PRESERVATION, PACKAGING & PACKING OF RUBBER & NYLON FUEL, OIL & WATER-ALCOHOL CELLS |
| MIL-S-52362 Revision D:1977 | SURVEYING SET GENERAL PURPOSE FOR PLAINMETRIC CONSTRUCTION & TOPOGRAPHIC SURVEYS, PACKAGING OF |
| MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
| MIL-I-50089 Revision A:1960 | INSTALLATION KIT, GAS PARTICULATE FILTER UNIT COMBAT VEHICLE M20 |
| DOD-C-24556 Base Document:1977 | CURTAIN, TRACK AND SUSPENSION SYSTEM, BERTH (SHIPBOARD USE) (METRIC) |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-P-0037564 Revision A:1978 | PLUG, EAR, HEARING PROTECTION UNIVERSAL SIZE WITH HEADBAND |
| MIL-V-21701 Revision B:1969 | VALVE, CHECK, OXYGEN MASK, INLET |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-V-50010 Base Document:1959 | VALVE, ANTIBACK DRAFT, PROTECTIVE SHELTER, M2 |
| GG D 475 : A | DIVIDER, SPACING, EQUAL |
| MIL-G-29170 Revision B:1988 | GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL N 27444 : D | NET, CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, AND HCU-16/C |
| MIL-H-51059 Revision A:1961 | HOSE, FUEL, FLAME THROWER, M8 |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL A 14399 : B | ANALYZER, SPECTRUM AN/UPM-58() |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL-A-12636 Revision B:1969 | ANALYZER ZM-3/U |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL-C-11260 Revision D:1980 | CLAMP, HANDLE, STEEL TAPE |
| MIL P 14257 : C | PRINTER, REDUCTION, STEREOPLOTTER, MULTIPLEX |
| MIL-C-10872 Revision E:1985 | CAP, FLUE, 4-INCH, CYLINDRICAL |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| MIL R 16847 : E | RING BUOY, LIFESAVING, UNICELLULAR PLASTIC |
| MIL-C-5499 Revision B:1984 | CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE |
| MIL G 9398 : C | GENERATOR, TACHOMETER, TWO POLE HIGH TEMPERATURE AIRCRAFT |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| PPP-C-2020 Revision A:1994 | CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| MIL-P-43951 Revision A:1989 | PADLOCK AND PADLOCK SETS, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE |
| GG-M-001371 Base Document:1978 | MALLET, PLUGGING, DENTAL |
| MIL-M-37448 Base Document:1977 | METER, SALINITY INDICATING, ELECTRIC |
| MIL-C-3133 Revision C:1976 | CELLULAR ELASTOMERIC MATERIALS, MOLDED OR FABRICATED |
| MIL-R-46710 Revision B:1984 | RECOVERY VEHICLE, FULL-TRACKED, LIGHT, ARMORED, M578, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-52674 Base Document:1969 | PHOTOMAPPING SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| GGG-T-2761 Base Document:1991 | TONGS, MATERIAL LIFTING, PIPE |
| MIL-I-27202 Revision A:1980 | INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-F-51163 Revision A:1981 | FILTER UNIT, GAS-PARTICULATE, GED OR EMD, 300 CFM, ABCA-M6A1 |
| MIL I 18369 : C | INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
| MIL-C-12512 Revision A:1960 | COILS, TELEPHONE REPEATING (COILS C-161() AND C-288()) |
| MIL D 11586 : D | DRIVER, ARMATURE WEDGE |
| MIL-S-13171 Revision B:1959 | SWITCHBOARD, TELEPHONE, MANUAL (TELEPHONE SWITCHBOARD SB-55) (FTC) |
| MIL-F-51217 Base Document:1965 | FILTER UNIT, GAS PARTICULATE, EMD, 1200 CFM, M10A2 |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL B 83424 : 0 | BATTERY SYSTEMS, SEALED CELL, NICKEL CADMIUM, INTEGRAL CHARGE CONTROL, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-D-24542 Revision B:1988 | DIVING OUTFIT, LIGHTWEIGHT |
| MIL-P-5431 Revision A:1967 | Plastic, Phenolic, Graphited Sheets, Rods, Tubes and Shapes |
| NNN-T-785 Revision B:1969 | TUBE CENTRIFUGE PLASTIC |
| MIL T 25627 : C | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| MIL-M-10670 Revision A:1952 | MONITORING SET, TELEPHONE [MONITORING EQUIPMENT] AN/PTA-1] |
| MIL P 49163 : A | PREAMPLIFIER, VIDEO AM-6923/UA |
| MIL P 46662 : C | PRIMER, PERCUSSION, M90, LOADING, ASSEMBLING AND PACKING |
| MIL-F-46220 Revision A:1962 | FUZE, PD, M525A1E1, HEAD ASSEMBLY FOR |
| MIL-A-22891 Base Document:1962 | AMPLIFIER, ERROR LIGHT, ASSEMBLY |
| MIL-B-12128 Revision C:1965 | BRASS, SINTERED: STRUCTURAL PARTS |
| MIL C 50525 : 0 | CHARGE ASSEMBLY, DEMOLITION, M183 WITH CHARGE, DEMOLITION M112, PARTS FOR, LOADING, ASSEMBLY AND PACKING |
| MIL-R-46903 Revision B:1965 | RELAY, EXPLOSIVE, XM10 LOADING, ASSEMBLING AND PACKING |
| MIL P 46402 : C | PRIMER, ELECTRIC, M83, LOADING, ASSEMBLING AND PACKING |
| MIL-C-23673 Revision A:1971 | CARTRIDGE, IMPULSE, MARK 43 MOD O |
| MIL M 7584 : A | METER, FUEL FLOW SYNCHRO STYLE TYPE B 3A |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| MIL I 13504 : E NOTICE 1 | IGNITER, BOMB, WP, AN-M23A1 (W/O Fuze) |
| GGG-E-950 Revision A:1988 | EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND |
| MIL-D-82490 Base Document:1967 | DRIVER, GAS OPERATED MARK 8 MOD 0 |
| MIL-S-1399 Revision E:1984 | SIGNAL, ILLUMINATION, AIRCRAFT TRACER DOUBLE STAR AN-M53A2 THROUGH AN-M58M2 PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-T-52993 Base Document:1981 | TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE |
| MIL-P-46476 Revision C:1975 | PRIMER, PERCUSSION, XM81, LOADING, ASSEMBLING AND PACKING |
| MIL-F-50495 Revision A:1975 | FIRING DEVICE, PRESSURE RELEASE TYPE, M5 AND M5 INERT ASSEMBLY PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| MIL-C-7438 Revision G:1985 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| ZZ-G-710 Revision B:1993 | GASKET MATERIAL, RUBBER 35 DUROMETER HARDNESS |
| MIL-C-23367 Base Document:1963 | COMPUTER, FLIGHT DIRECTOR, AIRCRAFT |
| MIL-DTL-25949 Revision F:1995 | ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED |
| SAE AS 13572 : 2014 | SPRINGS, HELICAL, COMPRESSION AND EXTENSION |
| SAE AMS P 83310 : 2016 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| SAE AS 39631 : 1999 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| SAE AS 22598 : 1999 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET-SIZE BS-5( ) |
| SAE AS 23479 : 2012 | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| SAE AS 85848 : 2017 | SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AS 5944 : 1999 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM F 1145 : 2005 : R2017 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-S-22141 Revision B:1976 | STEEL, INVESTMENT CASTINGS ALLOY AND CARBON |
| MIL-A-52963 Revision B:1986 | AIR CONDITIONER: SPLIT-PACKAGE, 208-VOLT, 3-PHASE, 400-HERTZ, AC, 18,000 BTU/HR COOLING, 30,000 BTU/HR HEATING |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-L-15596 Revision G:1988 | LOCK, COMBINATION (SAFE AND SAFE LOCKER) |
| MIL-I-37078 Base Document:1974 | INCUBATOR, BACTERIOLOGICAL, Small, 115 volt, 50/60 Hz, AC |
| MIL-B-8907 Revision A:1983 | BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD |
| MIL-S-36971 Revision A:1976 | SHAKING MACHINE, LABORATORY, 115 VOLT, 60 HZ, AC |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| MIL-B-1771 Revision H:1992 | BARBER KIT, WITH PLASTIC CASE |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL-T-37213 Revision A:1976 | TIMER, INTERVAL 115 VOLT 60 HZ AC |
| MIL-T-462 Revision E:1985 | TANK, LIQUID STORAGE, METAL, FUEL OIL, HORIZONTAL |
| HH-I-595 Revision C:1976 | INSULATION TAPE, ELECTRICAL, PRESSURE-SENSITIVE ADHESIVE, PLASTIC |
| MIL T 82073 : D NOTICE 1 | TRUCK, LUBRICATING AND FUEL SERVICING, 4 BY 2 AND 4 BY 4 |
| MIL-A-36495 Revision A:1975 | AUDIOMETER, GENERAL DIAGNOSTIC |
| MIL-E-24269 Revision B:1988 | EXTINGUISHER, FIRE, CARBON DIOXIDE, 15 POUND, PORTABLE, PERMANENT SHUTOFF, NAVY SHIPBOARD USE |
| W-E-00661 Revision B:1999 | ERASER, ELECTRIC |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING |
| MIL-C-19179 Revision B:1963 | COUPLING ASSEMBLY, QUICK-DISCONNECT, FUEL |
| MIL-S-36908 Revision A:1976 | SHAKING MACHINE, LABORATORY, SINGLE CUP, 115 VOLT, 50-60 HZ, AC |
| MIL-C-63550 Revision E:1985 | CABLE ASSEMBLIES, ELECTRICAL, FABRICATION SPECIFICATION FOR |
| J-C-1270 Revision B:1973 | CABLE ASSEMBLY, POWER, ELECTRICAL |
| MIL-S-36963 Revision A:1976 | STIRRER-HOT PLACE, MAGNETIC, LABORATORY |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| F-F-2790 Base Document:1991 | FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION |
| MIL-S-24686 Revision A:1992 | SPRINKLER, AUTOMATIC, QUICK RESPONSE |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-C-24066 Revision C:1992 | CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| OO W 00860 : E | WASHING MACHINE AND DRYING TUMBLERS, HOUSEHOLD LAUNDRY, POWER OPERATED AND LAUNDRY COMMERCIAL (SELF-SERVICE) |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| MIL-C-55442 Revision B:1985 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF |
| MIL-T-81364 Base Document:1966 | T-BOLT, 180,000 PSI TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-S-6451 Revision E:1977 | SHIELD, PROTECTIVE, AIRCRAFT AND MISSILES |
| MIL C 38159 : B | CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR |
| MIL-I-24683 Revision A:1990 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| W-S-610 Revision E:1990 | SPLICE CONNECTORS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-P-46843 Revision C:1989 | PRINTED WIRING ASSEMBLIES PRODUCTION OF |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-B-14984 Revision A:1977 | BODY-OGIVE MATCHED MACHINED ASSEMBLY FOR M454 PROJECTILE |
| MIL-C-5501 Revision G:1989 | CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL |
| MIL-A-82175 Base Document:1968 | ARMOR, BODY, FRAGMENTATION, PROTECTIVE: FOOTWEAR |
| MIL-C-52788 Revision B:1992 | CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED |
| MIL-C-37040 Revision A:1978 | CENTRIFUGE, LABORATORY, SMALL, 115 VOLT, 600 HZ, AC |
| MIL-P-46144 Revision C:1986 | PLASTIC SHEET, POLYCARBONATE |
| MIL-B-8831 Revision B:1982 | BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-R-36557 Revision C:1984 | REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-B-7838 Revision C:1989 | BOLT, INTERNAL WRENCHING 160 KSI FTU |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
| MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
| MIL-S-503 Revision B:1988 | SIREN, ELECTRIC, 2 AND 5 HORSEPOWER |
| MIL-G-81559 Revision C:1984 | GYROSCOPE ASSEMBLIES ATTITUDE - DIRECTIONAL REFERENCE INSTRUMENTS FOR AIRCRAFT PACKAGING OF |
| MIL-C-37220 Base Document:1976 | CENTRIFUGE, LABORATORY 115 VOLT 50/60 HZ |
| MIL-M-50276 Base Document:1969 | MODULE GENERAL SPECIFICATION FOR |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL-D-28728 Revision B:1986 | DIAL, CONTROL, MULTI-TURN COUNTERS, GENERAL SPECIFICATION FOR |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| MIL-C-11085 Revision D:1986 | CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES) |
| MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
| MIL-A-36926 Revision A:1974 | ANALYZING KIT, MEAT FAT CONTENT 115 VOLT, 60 HZ |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| MIL-R-19046 Revision D:1970 | RELAY PANEL, FIRING (FOR TORPEDO MARK 37 MODS O, O)M(,1,2, AND 3) |
| MIL-C-85521 Base Document:1983 | CONCENTRATOR, OXYGEN, GGU-7/A |
| ASTM B 791 : 1997 | Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999) |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-K-48213 Base Document:1973 | KNOB, SETTING |
| MIL-F-50280 Base Document:1969 | FILTER, CRYSTAL |
| MIL-P-71012 Revision A:1994 | PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11 |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| MIL-E-52715 Revision C:1992 | ERECTION AND MAINTENANCE EQUIPMENT FOR CABLE REINFORCEMENT SET FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-P-22046 Base Document:1959 | POWER SUPPLY MARK 20 MOD 1 |
| MIL I 7067 : B | INDICATOR, POSITION, FLAPS, 0 - 60 DEGREE MARKING, 2 INCH SIZE |
| MIL-G-3087 Revision C:1973 | GENERATOR SETS, STEAM TURBINE [DIRECT AND ALTERNATING CURRENT] [NAVAL SHIPBOARD USE] |
| MIL-P-52979 Base Document:1980 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 60 KW, 50/60 HERTZ, AN/MJQ-12A |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL V 7891 : E | VALVE, OXYGEN FILLER, LOW AND PRESSURE |
| MIL-C-50903 Base Document:1971 | CONNECTOR, MALE, ASSEMBLY FOR M18A1 APERS MINE |
| MIL-I-23594 Revision C:1988 | INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE |
| MIL-B-13831 Revision J:1985 | BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN |
| MIL-D-51388 Revision A:1979 | DETECTOR CELL, CHEMICAL AGENT |
| MIL-C-60943 Revision A:1970 | CARTRIDGE, 40MM, HE, M384 LOADING, ASSEMBLING AND PACKING |
| MIL-I-6447 Revision C:1974 | INDICATOR, TRUE AIRSPEED TYPE M 1A |
| MIL-D-17650 Revision B:1988 | DISK, VALVE, RUBBER, INSERT TYPE |
| MIL-C-55038 Revision A:1963 | CHARGER, RADIAC DETECTOR, PP-1578 ( )/PD |
| MIL P 11220 : C | PLOTTING BOARD ML-122 |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-A-50299 Base Document:1970 | ADAPTER AND TEST PLUG ASSEMBLY |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| MIL-P-52632 Revision D:1976 | POWER PLANT, UTILITY:MUST HOSPITAL SYSTEM |
| MIL-T-11527 Revision B:1952 | TANK, 76MM GUN, M41, M41A1, M41A2 AND M41A3, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-R-55499 Revision B:1974 | RADIO SET AN/PRC-77 ( ) ( UNITS OF) |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| MIL-M-52677 Revision A:1975 | MULTIPLEX SECTION, TOPOGRAPHIC MAPPING SET TRUCK MOUNTED, PACKAGING OF |
| MIL A 24775 : 0 | AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL-B-52734 Revision C:1991 | BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| MIL-A-28870 Revision A:1990 | ASSEMBLIES, ELECTRICAL BACKPLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR |
| MIL-M-13189 Revision A:1954 | MICROPHONE-ELEMENTS, CARBON AND EARPHONE ELEMENTS, MAGNETIC (FOR TELEPHONE AND RADIO USE) |
| MIL-C-14470 Revision A:1961 | CONVERTER SIGNAL DATA CV-395()/U |
| MIL-S-12100 Base Document:1952 | SHOCK MOUNT M-447. M-448, M-449 AND BRACKET FT-512 |
| MIL-B-53107 Base Document:1990 | BRIDGE, LIGHT ASSAULT 23 METER SPAN |
| MIL-DTL-62533 Revision A:1995 | CARRIER, CARGO, TRACKED, 22-TON, AMMUNITION MEDIUM: M992/A1/A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-L-45779 Revision C:1984 | LOADER-TRANSPORTER, GUIDED MISSILE, XM501E2 AND XM501E3 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL C 46747 : NOTICE 1 | CARRIER, CARGO, AMPHIBIOUS, M116 AND M116E1, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL A 28875 : 0 | AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| DOD-C-70514 Base Document:1985 | Cartridge, 120MM, Super Slug, Load, Assemble, and Pack |
| MIL-C-0010597 Revision F:1994 | CLEANING COMPOUND WITH CONDITIONER FOR ENGINE COOLING SYSTEMS |
| MIL-G-25507 Revision B:1991 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN 0-2000 PSI |
| MIL F 83870 : A | FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE |
| MIL-F-29419 Base Document:1985 | FRAME, SHIPPING [SIXCON] |
| MIL-D-55162 Revision B:1984 | DARK ROOM, PHOTOGRAPHIC, PORTABLE ES-38() |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| MIL-R-0036837 Revision A:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| GGG-M-125-3 Revision A:1982 | RESPIRATOR ASSEMBLIES: AIR LINE, WITH DISPOSABLE HOOD (SUPPLIED AIR) |
| GGG-M-125 Revision G:1985 | RESPIRATOR AND RESPIRATOR ASSEMBLIES: AIR LINE; NON-POWERED AIR-PURIFYING AND POWERED AIR-PURIFYING |
| MIL-T-38049 Revision A:1972 | TRANSMITTER, PRESSURE TRU 60A |
| MIL E 27005 : A | EXPLOSIVE KIT, PARACHUTE RELEASE MLU-5/B AND EXPLOSIVE KIT, PARACHUTE RELEASE MLU-7/B |
| GG-T-671 Revision F:1981 | TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION) |
| MIL-A-70952 Base Document:1990 | ALTERNATOR, TURBINE (AIR DRIVEN) |
| MIL-F-63067 Base Document:1976 | FUZE, M539, POWER SUPPLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| MIL-T-21671 Base Document:1958 | TEST SET MARK 126 MOD 0 |
| MIL F 16377 : G | FIXTURE, LIGHTING, INCANDESCENT, GENERAL LIGHTING 100 WATTS, 120 VOLTS, DRIPPROOF 15 DEGREES, SYMBOLS 89 & 90.2 |
| MIL I 38120 : A (3) | INDICATOR, RATE OF FLOW AND TRANSFER EFU 20/A |
| MIL-B-81119 Revision A:1989 | BAND, HANDLING, MISSILE AND BOOSTER |
| GGG-M-125-2 Revision A:1982 | RESPIRATOR ASSEMBLIES: AIR LINE, WITH HELMET (SUPPLIED AIR) |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL S 4880 : G NOTICE 1 | SWEEPER, MAGNET, SELF-PROPELLED |
| MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
| MIL-P-81255 Revision A:1976 | PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL-T-52957 Revision A:1978 | TEST SET, POWER SUPPLY FOR POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-428 |
| MIL-S-20561 Revision A:1974 | SPRING; ESCAPEMENT, CORROSION-RESISTING |
| GGG-M-125-4 Revision C:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, CHEMICAL CARTRIDGE (FOR ORGANIC VAPORS) |
| MIL-A-3816 Revision F:1992 | ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF |
| MIL-C-82894 Base Document:1994 | CARTRIDGE, FIRE EXTINGUISHER, CCU-126/A |
| MIL-A-81270 Base Document:1965 | ADHESIVE, SYNTHETIC RUBBER |
| MIL-F-63068 Base Document:1976 | FUZE, M539, IMPACT SWITCH ASSEMBLY FOR PARTS FOR, ASSEMBLING AND PACKING |
| MIL D 12817 : A | DRAFTING EQUIPMENT SET, BATTALION; SET 1, PACKAGING OF |
| MIL G 50954 : NOTICE 1 | GASKET |
| MIL-R-52928 Base Document:1977 | RESERVOIR SYSTEM, FABRIC, COLLAPSIBLE, 25,000 BBL, PETROLEUM, PACKAGING OF |
| MIL-E-22911 Revision D:1970 | ELECTRONIC PANEL (FOR TORPEDO MARK 37 MOD 2) |
| MIL-C-50288-8 Base Document:1970 | CABLE ASSEMBLY W3-AP-2 |
| MIL-L-82452 Revision A:1989 | LOGIC ASSEMBLY (FOR EXERCISE HEAD MK 85) |
| MIL-S-55578 Revision A:1967 | SHELTER, ELECTRICAL EQUIPMENT S-348( ) /TSC-58 |
| MIL-S-55498 Revision A:1970 | SHELTER FACILITY, ELECTRICAL EQUIPMENT, S-371( )/MSC-31A |
| MIL F 48355 : 0 | FUSE, ROCKET, BASE DETONATING, M434, ALTERNATE CONSTRUCTION ASSEMBLING AND PACKING |
| MIL-A-19815 Revision A:1964 | Arming Device (Unloaded and Loaded) Mark 2 Mods 1 and 3 (For Exploder Mechanism Mark 19 Series) (No S/S Document) |
| MIL-T-22913 Revision C:1971 | TIMER (FOR TORPEDO MARK 37 MOD 2) |
| MIL-C-24217 Revision A:1984 | CONNECTOR, ELECTRICAL, DEEP SUBMERGENCE, SUBMARINE |
| MIL-I-81765 Revision A:1987 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| GG T 416 : A | TIMER, INTERVAL, SPRING-DRIVEN, PHOTOGRAPHIC |
| MIL-W-60307 Revision C:1987 | WARHEAD, 2.75 INCH ROCKET, SMOKE, WP, M156 (METAL PARTS) |
| MIL-P-14232 Revision E:1976 | PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF |
| MIL-G-46886 Revision B:1992 | GREASE, SILICONE |
| RR-P-1352 Revision C:1989 | PARTITION, TOILET, COMPLETE |
| MIL-A-19736 Revision A:1960 | AIR REFUELLING SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
| MIL-M-55516 Revision A:1968 | MICROPHONE, DYNAMIC M-133/U |
| MIL T 38170 : F | TANK, MOBILE STORAGE, LIQUID OXYGEN TMU 27/M |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL-E-24355 Revision B:1982 | ELECTRODES, WELDING, BARE, SOLID NICKEL MANGANESE CHROMIUM MOLYBDENUM ALLOY STEEL FOR PRODUCING HY 13O WELDMENTS FOR AS WELDED APPLICATIONS |
| MIL-STD-1250 Revision A:1992 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL C 7958 : A | CONTROL, PUSH PULL, FLEXIBLE AND RIGID |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL G 14305 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL-R-27777 Revision B:1973 | RELAY, TELEGRAPH, PASSIVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-P-83668 Revision A:1976 | PLASTIC BOARD (FOR PACKAGING APPLICATIONS) |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62mm: M60E3 |
| MIL T 11656 : B | TEST SET, ELECTRICAL METER TS-682()/GSM-1 |
| MIL H 13253 : D | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL C 12159 : A | CALIBRATOR, FREQUENCY (FREQUENCY STANDARD TS 65( ) FMQ 1) |
| MIL-C-0024196 Revision B:1991 | CLEANING SYSTEMS, ULTRASONIC |
| MIL-G-45178 Revision A:1966 | GUN, SELF PROPELLED, FULL TRACKED, TWIN 40MM, M42 AND M42A1, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-C-24196 Revision A:1988 | CLEANING SYSTEM, ULTRASONIC |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-B-42079 Base Document:1994 | BRACE ASSEMBLY ADJUSTABLE BED |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-M-60003 Revision E:1992 | MOTOR, ROCKET, ASSEMBLY, M54 OR M123 PARTS FOR |
| GGG-M-125-11 Revision A:1982 | RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT (PORTABLE BACK-PACK) |
| MIL-A-46091 Revision B:1981 | ADHESIVE, BRAKE LINING TO METAL |
| MIL-DTL-62220 Revision C:1996 | RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL H 81529 : 0 | HOOK, HELICOPTER EXTERNAL CARGO, 6,000 POUND CAPACITY TYPE A |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-G-53010 Base Document:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 100 KW, 50/60 HERTZ, PU-495B/G |
| MIL-P-55151 Revision B:1973 | POWER SUPPLY PP-1104 ( )/G |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL C 6458 : C | CHAIN ASSEMBLY, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL P 16685 : D | PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE) |
| MIL-I-9443 Revision D:1972 | INDICATOR, TEMPERATURE THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-2 |
| MIL-L-24518 Base Document:1975 | LAMINATE, VINYL FILM ALUMINUM, DECORATIVE |
| MIL-T-25363 Revision D:1973 | TANK, PNEUMATIC PRESSURE, AIRCRAFT, GLASS FIBER |
| MIL-B-53083 Base Document:1988 | BAG, WATERPROOF, LOAD CARRYING; SPECIAL OPERATIONS WATERPROOF BAG (SOWB) |
| MIL-R-10159 Revision E:1969 | RAWIN SET AN/GMD 1 [UNITS OF] |
| MIL-P-22968 Revision B:1984 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL-R-42043 Base Document:1987 | REGULATOR, OXYGEN |
| MIL-G-23337 Base Document:1962 | GAGE - PRESSURE, DIAL INDICATING |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| GG-W-239 Revision C:1985 | WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL) |
| MIL-M-13130 Revision C:1972 | METER, AUDIO LEVEL TS-585(/U) |
| MIL S 51334 : 0 | SIMULATOR DETECTOR TICKETS, CHEMICAL AGENT: M5 |
| MIL-F-45687 Base Document:1961 | FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF |
| MIL-F-51357 Base Document:1976 | FILTER PANEL, INFANT PROTECTOR |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-S-51371 Revision C:1987 | SERVICE KIT, PORTABLE RIOT CONTROL AGENT DISPERSER, M254 |
| MIL C 81089 : NOTICE 1 | COORDINATE CONVERTER MARK 54 MOD O |
| MIL-A-6589 Revision A:1968 | AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2 |
| MIL-T-21205 Revision B:1960 | TRANSMITTER, RATE OF FLOW, FUEL; TRU-12/A (300 - 5000 -15000 PPH) |
| MIL-B-3067 Revision B:1959 | BRIDGE RESISTANCE (RESISTANCE BRIDGE ZM-4) (1U (ADDENDUM (1))) |
| MIL-D-3344 Revision D:1990 | DIVING EQUIPMENT SET, TWO PERSONS 100 FOOT DEPTH, PACKAGING OF |
| MIL-B-85598 Base Document:1988 | BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR |
| ASTM F 1567 : 1994 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| MIL-R-55615 Revision B:1984 | RADIACMETER 1M-174( ) PD |
| MIL-H-4495 Revision D:1985 | HOSE ASSEMBLY, RUBBER, AERIAL REFUELING |
| MIL-C-22848 Revision B:1970 | CARTRIDGE, IMPULSE, MARK 37 MOD O |
| GG-T-355 Revision B:1967 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM, (METEOROLOGICAL) |
| GGG-S-60 Revision C:1978 | SAWS, BUTCHER'S; AND BLADES, BUTCHER'S HANDSAW |
| MIL W 3662 : B | WIRE, PLATINUM ALLOY [PLATINUM RUTHENIUM, PLATINUM IRIDIUM |
| MIL-E-83510 Revision A:1980 | EARPHONE ELEMENT |
| MIL V 24258 : 0 | VALVE, CHECK, INHALATION AND EXHALATION, FOR UNDERWATER BREATHING APPARATUS (SCUBA) |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-DTL-62015 Revision G:1995 | CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-39004 Base Document:1964 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, GENERAL PURPOSE, FOR SUBMINIATURE WAVEGUIDE FLANGES, GENERAL SPECIFICATION FOR |
| MIL J 2829 : E | JOINT SEALING PACKING |
| L-P-508 Revision H:1977 | PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL-M-52673 Base Document:1970 | MAP REVISION SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKING OF |
| MIL-A-36188 Revision B:1989 | APRON, DENTAL, PLASTIC |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL I 49173 : A | IMAGER, OPTICAL SU-103A/UA |
| GGG-C-520 Revision B:1967 | CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF |
| MIL-C-6136 Revision A:1965 | Conduit: Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Use SAE-AS6136) |
| MIL M 26542 : D (1) SUPP 1 | MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING |
| MIL-M-60923 Revision A:1970 | MINE, APERS, M26 LOADING, ASSEMBLING AND PACKING |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| MIL-A-85481 Base Document:1981 | ARMING WIRE ASSEMBLIES |
| MIL-F-52236 Base Document:1962 | FILTER ELEMENT, AIR, DIVER S, POLYURETHANE FOAM |
| GG-R-1971 Base Document:1976 | RETRACTOR, RIB, HARKEN |
| MIL H 12487 : B NOTICE 1 | HEADSET ELECTRICAL (HEADSETS ELECTRICAL H-16)(/U AND HEADSETS H-65)(/U |
| MIL-R-51199 Revision A:1984 | REFILL KIT, ANALYZING COMPONENTS, CBR AGENT SAMPLING & ANALYZING KIT, M33 |
| MIL-C-11020 Revision B:1966 | CHESTS AND CASES, METAL, GENERAL SPECIFICATION FOR |
| MIL L 3890 : A | LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC] |
| MIL-D-12195 Revision D:1984 | DRIER, PHOTOGRAPHIC FILM EL-4/U |
| MIL-C-55416 Base Document:1965 | CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF) |
| MIL-A-45940 Base Document:1971 | ARMAMENT SUBSYSTEM, HELICOPTER, 7.62 MM MACHINE GUN: DOOR MOUNTED, LIGHT WEIGHT, M24 (LESS M60D MACHINE GUN) |
| MIL-T-52806 Revision A:1980 | TABLE, VEHICULAR-MOUNTED, FLAT TOP, 2 DRAWER |
| MIL-F-50057 Base Document:1959 | FILTER UNIT, GAS AND PARTICULATE, EMD,, 2,500 CFM, M11 |
| GG-S-1616 Revision A:1987 | SCISSORS, COLLAR AND CROWN |
| GG-B-735 Revision B:1985 | BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED) |
| MIL-C-45469 Revision E:1986 | CAP, BLASTING, NON-ELECTRIC: M7 LOADING, ASSEMBLING AND PACKING |
| MIL-A-50292 Base Document:1970 | ADAPTER AND TEST PLUG ASSEMBLY: TRAINING |
| MIL H 83511 : 0 | HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATIONS FOR |
| GGG-M-125-1 Revision B:1982 | RESPIRATOR ASSEMBLIES, AIR LINE, WITH FACE PIECE (SUPPLIED AIR) |
| MIL-F-51536 Base Document:1988 | FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56 |
| MIL-T-19576 Revision A:1961 | TRANSMITTER, REMOTE COMPASS, THIN WING TYPE ML-1 (UNSTABILIZED) |
| MIL-A-38462 Revision B:1970 | AIR CONDITIONER A/E32C-30 |
| MIL C 28830 : C | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| MIL-STD-1190 Base Document:1986 | MINIMUM GUIDELINES FOR LEVEL C PRESERVATION, PACKING AND MARKING |
| MIL-T-23132 Revision A:1972 | TUNGSTEN DELAY COMPOSITION |
| MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| MIL S 49168 : B | SCAN-INTERLACE PL-1403/UA, PL-1403A/UA |
| MIL-B-18147 Revision C:1983 | BOATS AND CRAFT; PREPARATION FOR DELIVERY OF |
| MIL-S-11039 Revision E:1978 | SLOTTED TEMPLATE, RADIAL ARM, PHOTOGRAMMETRIC SET VALIDATED DEC 1975 |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL R 49176 : A NOTICE 1 | REGULATOR, VOLTAGE, BIAS CN-1503/UA |
| MIL-R-23811 Base Document:1963 | RECORDER ASSEMBLY (FOR TORPEDO EXERCISE SECTION MARK 64 MOD 2) |
| MIL T 25446 : D | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE |
| MIL-D-60031 Revision A:1978 | DETONATOR, ELECTRIC M69 LOADING, ASSEMBLING AND PACKING |
| MIL H 81581/8 : 0 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| MIL-P-46036 Revision B:1973 | PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| MIL-S-63280 Base Document:1978 | SOLENOID FOR MACHINE GUN, CALIBER .50, FIXED M85 |
| MIL-I-23322 Base Document:1962 | IGNITER, MARK 173 MOD 1 (INERT ASSEMBLY) |
| MIL-H-9850 Revision C:1977 | HINGE, BUTT, CONTINUOUS, PIANO |
| MIL-B-37484 Base Document:1976 | BEAKER-FLASK, LABORATORY |
| FF-O-601 Revision F:1990 | OPENERS, CAN, HAND AND MOUNTED |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL R 71135 : 0 | RIFLE, 5.56 MM: M16A2E3 (M16A3) |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| MIL A 417 : G | ADAPTER, PRIMING: M1A4 |
| MIL-I-5133 Revision C:1953 | INDICATOR, ATTITUDE TYPE J 8 |
| MIL-P-60009 Revision B:1990 | PROPELLANT CHARGE ASSEMBLY ROCKET, HIGH EXPLOSIVE, 66MM, M72A1, WITH COUPLER |
| GG-H-1970 Base Document:1976 | HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5-1/2 INCH |
| MIL T 24552 : A | TERMINALS AND PLUGS, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| MIL S 6852 : B | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT |
| MIL P 52955 : A | POSITION & AZIMUTH DETERMINING SYSTEM (PADS), AN/USQ-70(U) |
| MIL-G-22077 Revision C:1993 | GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE |
| MIL-G-45140 Revision B:1976 | GUN, SPOTTING, CALIBER .50, M8C |
| ASTM E 784 : 1989 : R2017 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-A-49273 Base Document:1988 | AMPLIFIER, POWER SUPPLY AM-7152/GRC-213 & ADAPTER KIT, VEHICLE MK-2154/GRC-213 |
| MIL G 52888 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 100 KW, 50/60 HERTZ, PU-495A/G |
| MIL-C-5604 Revision B:1962 | COMPASS, MAGNETIC, PILOTS STANDBY |
| MIL-T-26017 Revision C:1972 | TEST STAND, HYDRAULIC SYSTEM COMPONENTS, TYPE MK-3A (STAND, TEST, AIRCRAFT HYDRAULIC SYSTEM, ELECTRIC MOTOR DRIVEN, TYPE MK-3A) |
| MIL-B-24781 Base Document:1993 | BATTERBOARD SYSTEMS, SYNTHETIC |
| MIL-D-51370 Revision A:1986 | DISPERSER, RIOT CONTROL AGENT, PORTABLE, 3 GALLON, M33 |
| MIL S 37358 : A | SEALER HOLDER, CAPILLARY TUBE |
| MIL-L-11296 Revision B:1966 | LIGHT ASSEMBLIES, ELECTRIC MX-129 ((/PAQ & MX-1292) (/PAQ) |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-2778 Revision B:1965 | RUBBER SHEET, SOLID, UNVULCANIZED, HIGH GRAPHITE, GASKET USE SYMBOL 2352 |
| MIL-R-46453 Revision D:1975 | RELAY, M7, PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-P-17578 Revision A:1967 | PACKING MATERIAL, PLASTIC (FOR DOGS FOR WATERTIGHT CLOSURES) (SYMBOL 1425) |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| MIL-HDBK-1250 Revision A:1995 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-A-70827 Revision A:1994 | ACTUATOR, PISTON, PA535 PARTS FOR AND LOADING, ASSEMBLING, AND PACKING |
| MIL-F-60041 Revision B:1975 | FUZE, BASE DETONATING, M578 LOADING, ASSEMBLING AND PACKING |
| MIL-B-13136 Revision B:1968 | BATTERIES DRY |
| MIL-G-46723 Revision C:1981 | GUN, SELF PROPELLED, FULL TRACKED, 175MM, M107 & HOWITZER, SELF PROPELLED, FULL TRACKED, 8 INCH, M110A1 & M110AZ, PROCESSING FOR STORAGE & SHIPMENT OF |
| MIL-T-21674 Base Document:1958 | TEST SET MARK 177 MOD O |
| MIL E 24416 : B | EXTINGUISHING SYSTEM, FIRE, FIXED, AQUEOUS POTASSIUM CARBONATE FOR RANGE AND EXHAUST SYSTEMS (SHIP AND SHORE USE) |
| MIL-D-52840 Base Document:1975 | DETECTOR, BATCH INTERFACE |
| MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
| MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
| MIL-C-85019 Base Document:1976 | COMPUTER, AIR NAVIGATION, TRUE AIRSPEED, MACH NUMBER, WIND COMPONENTS SUPERSONIC, TYPE MB-9 |
| SAE AMS P 29609 : 2016 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
| MIL W 50927 : NOTICE 2 | WARHEAD SECTION 762MM ROCKET HE M186 LOADING ASSEMBLING & PACKING |
| GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| MIL-I-23870 Base Document:1963 | INDICATOR, FUEL RATE OF FLOW, 0 TO 15 GPM |
| MIL-C-70724 Base Document:1992 | CARTRIDGE, 5.56MM, BLANK, M200A1 PERFORMANCE SPECIFICATION FOR |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| MIL-C-9082 Revision H:1986 | CONVERTER, OXYGEN, AIRCRAFT, LIQUID TO GASEOUS, GENERAL SPECIFICATION FOR |
| MIL-B-29159 Revision A:1989 | BOAT SYSTEM, UTILITY, NOMINAL, 20-FOOT REINFORCED PLASTIC WITH 100-HORSEPOWER OUTBOARD ENGINE AND TRAILER |
| MIL-D-21354 Base Document:1958 | DYE, 1, 4-DIEMTHYLAMINO-ANTHRAQUINONE (FOR COLORED SMOKE MIXTURES) |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
| MIL-C-21049 Revision F:1990 | Coupling Assemblies, Quick Disconnect, Aircraft Liquid Oxygen Systems |
| MIL-A-85652 Base Document:1984 | AMPLIFIER-MIXER AM-7157/DKT-59 |
| MIL-C-10065 Revision B:1966 | CABLE, SPECIAL PURPOSE, ELECTRICAL, (MULTIPAIR, AUDIO FREQUENCY) |
| MIL-P-83927 Revision B:1981 | POWER SUPPLIES, GUIDED MISSILE LAUNCHERS, SINGLE TYPES PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, AND COMPOSITE TYPE PP-4506/A AND PS-1037 |
| MIL-M-17522 Revision D:1967 | MASK, PROTECTIVE, ND MARK V |
| MIL-S-83427 Base Document:1974 | SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P |
| MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
| MIL C 38271 : B | CONNECTOR, OXYGEN MASK TO REGULATOR CRU-60/P |
| MIL-I-46521 Revision D:1979 | IGNITER, PRIMER, ELECTRIC, M74 LOADING, ASSEMBLING AND PACKING |
| MIL-P-10653 Revision D:1972 | POWER SUPPLY [PLATE SUPPLY TIMER UNIT PE 244] |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-R-11764 Revision A:1960 | RESISTOR, DECADE ZM-16 ()/U |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| MIL M 12863 : 0 | MOUNT, VIBRATION (VIBRATION MOUNTS MT-1177/U, MT-1178/U, MT-1179/U |
| MIL-R-17882 Revision E:1993 | REPAIR KIT, METALLIC PIPE AND GENERAL PURPOSE, DAMAGE CONTROL |
| MIL-A-85648 Base Document:1983 | AMPLIFIER, TRAVELING WAVE TUBE |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| MIL G 16356 : D | GAGE, BOILER WATER, DIRECT READING |
| MIL-I-24703 Base Document:1988 | INSULATION, PIPE, POLYPHOSPHAZENE, SHEET AND TUBULAR |
| MIL-S-5594 Revision B:1971 | SWITCH, TOGGLE, ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL A 55359 : 0 | ANTENNA AS-1304 ( ) /ARN-30 |
| MIL-S-70547 Base Document:1986 | SPHEROIDAL PROPELLANT, M38 FOR USE IN PROPELLING CHARGES M218, M219 AND M220 FOR CARTRIDGES, 81 MM, SMOKE, M819, ILLUMINATING M853 AND PRACTICE, M879 |
| MIL-P-63073 Revision A:1980 | PRIMER, ELECTRIC, M120 PARTS FOR |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
| MIL-C-23933 Revision B:1971 | CARTRIDGE, IMPULSE, MARK 44 MOD O |
| MIL-M-85831 Base Document:1989 | MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| MIL-B-29165 Revision A:1982 | BUILDINGS, PREFABRICATED, PANELIZED: WOOD, ONE-ROOM, ARCTIC CLIMATE |
| MIL-T-3618 Revision C:1969 | THERMOMETER, SELF INDICATING, BIMETALLIC |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-C-17223 Revision A:1959 | CLEANER, WELDING AND CUTTING TIP |
| MIL-G-25871 Revision B:1978 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL-B-82564 Base Document:1968 | BISTABLE MULTIVIBRATOR ASSEMBLY LD546989 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-H-13109 Revision A:1966 | HEADSET, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-B-42017 Base Document:1986 | BUR, BONE SURGERY (TUNGSTEN CARBIDE), GENERAL REQUIREMENTS FOR |
| MIL-A-23442 Revision A:1965 | AMMONIUM PERCHLORATE |
| MIL-B-15894 Revision B:1966 | BRASS: DIE CASTINGS |
| MIL-M-13786 Base Document:1954 | MOTOR, FRACTIONAL HORSEPOWER, DIRECT CURRENT AND UNIVERSAL (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). VALIDATED MAR 1965 |
| MIL-S-50482 Revision A:1971 | SIGNAL, ILLUMINATION, GROUND, YELLOW, XM191, GREEN, XM192 AND RED, XM193 PARTS FOR AND LOADING, ASSEMBLING PACKING |
| MIL C 82876 : 1993 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5B/A ASSEMBLY |
| MIL-R-24061 Revision B:1972 | RADIAC SET, AN/PDR-27 |
| MIL-A-62019 Revision B:1969 | ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL-TRACKED, 152 MM, M551; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-S-83129 Revision A:1972 | SPECTROMETER, FLUID ANALYSIS A/E35U-3 |
| MIL-B-16747 Revision C:1963 | Boiler, Steam, High Pressure, Water Tube Type, Auxiliary-Navy Shipboard (No S/S Document) |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-C-36416 Revision C:1978 | CENTRIFUGE LABORATORY HEMATOLOGY SMALL |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| MIL-F-52594 Revision A:1975 | FLOODLIGHT SET, ELECTRIC, PACKAGING OF |
| MIL-I-8835 Revision A:1984 | INDICATOR, HUMIDITY, CARD, CHEMICALLY IMPREGNATED |
| MIL-P-82650 Base Document:1976 | PLASTIC MOLDING MATERIAL, GLASS PHENOLIC |
| MIL C 46746 : D NOTICE 1 | CARRIER, COMMAND POST, LIGHT TRACKED, M577 AND M577A1, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL C 45360 : H | CARRIERS, PERSONNEL, FULL-TRACKED: ARMORED, M113A2, AND M113A3; MORTARS, SELF-PROPELLED: 107 MM, M106, M106A2, AND 81 MM, M125A1 AND M125A2, AND 120 MM, M1064; AND SMOKE GENERATOR: M1059; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-S-51422 Revision B:1987 | SHELTER AND ENTRANCE ASSEMBLY - CHEMICAL-BIOLOGICAL SHELTER SYSTEM: INFLATABLE |
| MIL-A-55138 Revision B:1965 | ANTENNA AT-784()/PRC |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| MIL-P-52855 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE 15 KW, 400 HERTZ AN/MJQ-15 |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| SAE AMS P 46112 : 2002(S2015) | PLASTIC SHEET AND STRIP, POLYIMIDE |
| SAE AMS P 21922 : 2016 | PLASTIC RODS AND TUBES, POLYETHYLENE |
| SAE AS 6625 : 1997 | SPRAY EQUIPMENT, AIRCRAFT WINDSHIELD, ANTI-ICING |
| ASTM B 102 : 2000 | Standard Specification for Lead- and Tin-Alloy Die Castings |
| NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
| SAE AS 85731 : 2015 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| ASTM F 1567 : 1994 : R2001 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| SAE MA 2151 : 2015 | CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| SAE AS 81099 : 2017 | ELECTRIC DEVICES, SIMPLE, GENERAL SPECIFICATION FOR |
| ASTM B 176 : 2018 : REDLINE | Standard Specification for Copper-Alloy Die Castings |
| SAE AS 5994A:2000(S2013) | PUMP UNITS, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY |
| ASTM F 1145 : 2005 | Standard Specification for Turnbuckles, Swaged, Welded, Forged |
| MIL-P-82442 Base Document:1966 | PUMP, SEA WATER |
| MIL-M-82433 Revision A:1972 | MOTOR, DIRECT CURRENT)(FOR TORPEDO MK 46 MOD 1) |
| MIL-P-82436 Base Document:1966 | PUMP, FUEL |
| MIL-P-53087 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE-DRIVE, TRAILER MOUNTED, 3KW, 60 HERTZ, AN/MJQ-32 |
| MIL H 38390 : C | HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE |
| GGG-G-521 Revision E:1988 | GOGGLES, INDUSTRIAL, RESILIENT FRAME |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| MIL-L-9131 Revision H:1983 | LIFE RAFTS, INFLATABLE, TWENTY MAN |
| MIL-F-2763 Revision B:1966 | FILTER, LIGHT, OPTICAL INSTRUMENT, BINOCULAR |
| MIL-B-15004 Revision A:1953 | BALLOONS, AEROLOGICAL |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL-F-14252 Base Document:1956 | FIRE CONTROL MATERIAL, GENERAL SPECIFICATION GOVERNING THE DESIGN AND INSPECTION OF. |
| MIL-A-52435 Revision D:1984 | AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR |
| MIL-P-17802 Revision E:1987 | PADLOCK AND PADLOCK SETS, LOW SECURITY, KEY OPERATED, REGULAR (OPEN) SHACKLE |
| MIL-A-81264 Base Document:1965 | ASBESTOS FELT OR MAT, RESIN IMPREGNATED |
| MIL-R-29565 Revision A:1990 | ROCKET MOTOR, MK 125 MOD 1 |
| MIL-S-6330 Revision H:1965 | SURVIVAL KIT, LIFE RAFT |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| MIL-S-45005 Revision C:0198 | SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEAL |
| MIL-M-9397 Revision E:1979 | FREQUENCY CONVERTER, MOBILE, TYPE MC-1A |
| MIL-C-55508 Base Document:1966 | COIL ASSEMBLY, TELEPHONE LOADING CU-260( ) /G |
| GG-T-321 Revision D:1977 | THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS |
| MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
| MIL P 22629 : NOTICE 3 | PRINTED WIRING BOARDS |
| MIL-F-51318 Revision A:1988 | FILTER UNIT, GAS-PARTICULATE, EMD, 300 CFM, M6A2 |
| MIL-S-48142 Base Document:1973 | SIGNAL, ILLUMINATION, GROUND, XM199 RED, XM201 WHITE, XM200 GREEN AND XM198 AMBER PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL S 81127 : 0 | SIMULATOR LAUNCHER AND MISSILE MARK 6 MOD 2 |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| MIL-T-55431 Revision A:1968 | TEST SET, BATTERY AN/PSM-13 ( ) |
| MIL-T-55691 Base Document:1953 | TEST SET, BATTERY AN/USM-63 ( ) /U |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| MIL-H-28719 Base Document:1970 | HEADER, HERMETICALLY SEALED |
| MIL-C-10544 Revision C:1962 | CONNECTORS, PLUG & RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED) |
| SAE AS 8181 : 1997 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-I-81564 Base Document:1967 | INITIATOR, CARTRIDGE ACTUATED, MARK 12 MOD O |
| MIL-A-11892 Base Document:1952 | ANTENNA GROUP OA-249( )/GRC-10 (COMPONENTS OF) |
| MIL-S-48377 Base Document:1974 | SIGNAL, SMOKE, GROUND XM202 THRU XM205 RED, YELLOW, GREEN AND WHITE PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL R 14293 : A | RESISTOR, FIXED, HIGH MEGOHM (HERMETICALLY SEALED) |
| MIL-T-25193 Revision B:1961 | TRANSMITTER, REMOTE COMPASS, TYPE C-2 (UNSTABILIZED) |
| MIL-I-5170 Revision C:1987 | INDICATOR, POSITION, HORIZONTAL STABILIZER |
| MIL-G-52552 Revision B:1981 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU656/G |
| MIL-I-5418 Revision B:1963 | INDICATOR: AIRSPEED, PITOT STATIC, SENSITIVE, 50-650 KNOTS |
| MIL-G-52537 Revision C:1980 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU-375B/G |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| NNN C 435 : B NOTICE 1 | |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-G-52495 Revision B:1980 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 5 KW 60 HERTZ PU618/M |
| MIL-F-81265 Base Document:1990 | FIBER, ASBESTOS |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-I-82877 Base Document:1992 | IGNITION ELEMENT, PVU-15/B |
| MIL T 5421 : B | TUBE, PITOT, ELECTRICALLY HEATED, AIRCRAFT |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| MIL-S-81551 Base Document:1968 | SWITCH, TOGGLE, HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-I-46224 Revision E:1989 | IGNITER, ELECTRIC, PRIMER, M63, PARTS FOR, AND LOADING, ASSEMBLING AND PACKING |
| MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
| MIL-M-7997 Revision C:1981 | MOTOR, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT GENERAL SPECIFICATION FOR |
| MIL G 50955 : NOTICE 1 | GASKET |
| MIL-P-70825 Revision A:1994 | PRIMER, BATTERY, STAB/ELECTRIC PA536 PARTS FOR, AND LOADING, ASSEMBLING AND PACKING |
| GGG-M-125-5 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS, FUMES, AND MISTS) |
| MIL A 24533 : B | ACTUATORS, ROTARY HYDRAULIC RACK AND PINION |
| SAE AMS T 81914 : 2013 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL C 15730 : M | COOLER, FLUID, NAVAL SHIPBOARD, LUBRICATING OIL, HYDRAULIC OIL, AND FRESH WATER |
| MIL C 2486 : C | CABLE, SPECIAL PURPOSE, ELECTRICAL WM-46/U |
| MIL S 21903 : 0 | SD-4 MOD 1 MECHANISM |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| MIL-B-12719 Revision C:1973 | BAG, CANVAS, CARRYING FOR DEMOLITION EQUIPMENT |
| MIL-T-81148 Revision B:1972 | TRANSFORMER, DISCRIMINATOR (FOR TORPEDO MARK 37 MODS O, 2, AND 3) |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-P-82579 Base Document:1973 | POWER SUPPLY, MULTIVOLTAGE, DIRECT CURRENT (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL-G-18853 Revision C:1975 | GYRO, RATE (FOR TORPEDO MARK 37 MOD 0, 1, 2 AND 3 |
| MIL-S-70791 Base Document:1990 | SIMULATOR, MISSILE: SAGGER XM27, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL F 10538 : E NOTICE 1 | FRAMES, STEREOPLOTTER PROJECTION MULTIPLEX [SINGLE AND DOUBLE] WITH CASE |
| MIL T 46773 : A | TANK, COMBAT, FULL-TRACKED, 120MM GUN, M103, M103A1 AND M103A2, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-S-85510 Base Document:1981 | |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| GGG-S-735 Revision B:1976 | STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR |
| MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
| MIL-W-19044 Revision E:1993 | WASHER-EXTRACTOR MACHINE, LAUNDRY, COMMERCIAL (NAVAL SHIPBOARD) |
| MIL-T-22030 Base Document:1959 | TRANSMITTER, RATE OF FLOW, FUEL; TRU 26/A (300 TO 10,000 PPH) |
| MIL-D-19403 Base Document:1956 | DRIVE, ANTENNA, VERTICAL, STABILIZATION, FOR AS-473/ASB-1 (BUORD DRAWINGS 776405, 776463, VERTICAL STABILIZATION SERVO CLUTCH, FOR ASB-1; 864390, 1444082 FOR ASB-1A) |
| MIL-C-81582 Revision B:1975 | CONNECTOR, ELECTRICAL, BAYONET COUPLING, ENVIRONMENTAL RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-P-18713 Base Document:1955 | PRIMER, ELECTRIC, MARK 44 MOD 0 |
| FF-H-001687 Revision B:1976 | LOCKS, OFFICE MACHINE |
| L-P-383 Base Document:1967 | PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED |
| MIL-P-8587 Revision B:1993 | PLASTIC, SHEET, COLORED, INSTRUMENT FLYING TRAINING |
| GG-B-823 Revision C:1975 | BURS, DENTURE TRIMMING, HIGH SPEED TOOL STEEL |
| MIL E 6058 : B NOTICE 1 | ENGINE, AIRCRAFT, RECIPROCATING, PREPARATION FOR SHIPMENT AND STORAGE OF |
| GGG-N-398 Revision A:1963 | NUT RUNNER, PNEUMATIC, PORTABLE |
| MIL-H-49448 Base Document:1988 | HUMIDITY SENSOR, RESISTANCE |
| MIL-A-22055 Base Document:1962 | AMPLIFIER MARK 140 MODS 0, 1, AND 2 |
| MIL-F-13893 Revision E:1969 | FIRING DEVICE, DEMOLITION, DELAY TYPE, M1 PARTS FOR AND LOADING ASSEMBLING AND PACKING |
| MIL T 14147 : A | TEST FACILITIES KIT, TELEPHONE CARRIER MK-155 ()/TCC |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| MIL-V-8610 Revision B:1984 | VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC |
| MIL-C-81788 Base Document:1970 | CARTRIDGE, DELAY, MARK 4 MOD 2, MARK 5 MOD 2 AND MARK 6 MOD 2 |
| MIL-S-1398 Revision E:1984 | SIGNAL, ILLUMINATION, AIRCRAFT DOUBLE STAR AN-M37A2 THROUGH AN-M42A2 PARTS AND LOADING, ASSEMBLING AND PACKING |
| MIL-HDBK-775 Base Document:1996 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| DOD P 16232 : F | PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE (FOR FERROUS METALS) |
| MIL-C-51330 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M12 |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL W 48302 : NOTICE 3 | WINDOW, OBSERVATION |
| MIL-C-13664 Revision A:1962 | CLIP, CARTRIDGE, FOR U.S. RIFLES, CALIBER .30M1, MIC AND MID |
| MIL-S-82492 Base Document:1967 | SWITCH, INTEGRATOR MARK 62 MOD 2 |
| MIL-D-52645 Revision A:1973 | DISTILLATION EQUIPMENT SET, WATER, THERMOCOMPRESSION TYPE, 150 GALLONS PER HOUR, PACKAGING OF |
| MIL-I-25852 Revision B:1981 | INDICATOR, TEMPERATURE, THERMO COUPLE EHU-4/A |
| MIL-I-27273 Revision A:1965 | INVERTER, POWER, STATIC, GENERAL SPECIFICATION FOR |
| MIL-C-50288-11 Revision A:1970 | CABLE ASSEMBLY SPECIAL PURPOSE ELECTRICAL T4193 |
| MIL B 82640 : 0 | BOOT ASSEMBLY, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-I-9343 Revision C:1985 | INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ 1 |
| MIL-G-8798 Base Document:1956 | GAGE SYSTEM, FUEL QUANTITY, CAPACITOR TYPE NONVACUUM TUBE, INTEGRALLY LIGHTED GENERAL SPECIFICATION FOR |
| MIL-I-21203 Revision A:1962 | INDICATOR, ATTITUDE, SPHERICAL, DIRECT READING, FAST ERECTING, ELECTRIC GYRO |
| MIL V 8057 : F | VALVE, OXYGEN, PRESSURE BUILDUP AND VENT |
| MIL-G-22169 Base Document:1959 | GYRO, VERTICAL AND MOUNT |
| MIL S 71079 : 0 | SOLENOID VALVE, 3-WAY: 12561784 |
| MIL-R-46762 Base Document:1963 | RUBBER STOCK, UNVULCANIZED, TRACK SHOES, PADS, AND PIN BUSHINGS |
| MIL-M-7405 Revision D:1986 | MAINTENANCE PLATFORM, AIRCRAFT, TYPE B-5A |
| MIL-C-22211 Revision A:1969 | CALIBRATOR SET, RADIO, AN/UDM-1 |
| MIL-C-18053 Revision A:1958 | CONTROL AMPLIFIER, ALTITUDE (P-1 AUTOMATIC PILOT RADAR SET, AN/APN-22) |
| MIL E 82463 : 0 | EXERCISE HEAD MARK 78 MOD 2 |
| MIL-F-85731 Base Document:1986 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-T-23824 Revision A:1971 | TORPEDO BEACON LIGHT (FOR TORPEDO MARK 37 MODS O, 2 AND 3) |
| MIL C 82922 : 1994 | CARTRIDGE, IMPULSE, CCU-123/E (EARTH ANCHOR CARTRIDGE) |
| MIL-G-19027 Revision D:1966 | GYRO, STEERING (FOR TORPEDO MARK 37 MODS O, 2, 3) |
| MIL-H-24460 Revision B:1988 | HARNESS, SAFETY, AND LANYARDS, SAFETY AND WORKING |
| MIL W 22176 : A NOTICE 1 | WATCH, WRIST, SUBMERSIBLE (4OO-FOOT), NON-MAGNETIC |
| MIL T 5350 : E | TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL S 51200 : A | SAMPLING KIT, CBR AGENT, M34 |
| MIL V 87223 : 0 | VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
| MIL T 55686 : NOTICE 1 | TRANSIT FRAME, ANTENNA MT-3894()/TRC & MT-3895()/TRC |
| MIL-C-85518 Base Document:1984 | COMPUTER SET, STANDARD AIRBORNE AN/AYK-14(V) GENERAL SPECIFICATION FOR |
| MIL-G-52858 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 50/60 HERTZ, PU-406B/M |
| MIL-A-46864 Revision B:1991 | ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
| IEEE 1293-1998 | IEEE Standard Specification Format Guide and Test Procedure for Linear, Single-Axis, Non-Gyroscopic Accelerometers |
| NNN-S-1356 Revision B:1978 | SPATULA LABORATORY (METAL BLADE) |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR |
| MIL-I-19028 Revision E:1971 | INVERTER (FOR TORPEDO MARK 37 MODS O, O)M(, 1, 2, AND 3) |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| HH-I-435 Revision B:1977 | INSULATORS, ELECTRIC, PORCELAIN AND GLASS |
| G-D-331 Revision D:1974 | DICTIONARIES, ENGLISH |
| MIL-STD-1169 Revision B:1987 | PACKAGING PACKING AND MARKING FOR SHIPMENT OF INERT AMMUNITION COMPONENTS |
| MIL-A-81236 Base Document:1965 | ADHESIVE; EPOXY RESIN WITH POLYAMIDE CURING AGENT |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| MIL-L-28796 Base Document:1973 | LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR |
| MIL-P-11329 Revision E:1983 | PRIMER, ELECTRIC, M59, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| FF-P-101 Revision F:1984 | PADLOCK |
| MIL-G-52927 Revision A:1985 | GENERATOR SETS, GASOLINE ENGINE, TRAILER MOUNTED 3 KW, 28 VOLT DC, PU-666/G |
| MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-S-52561 Revision A:1972 | SUPPLEMENTARY EQUIPMENT SET, TOPOGRAPHIC PHOTOMAPPING, PACKAGING OF |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING |
| MIL-T-7771 Revision B:1980 | TUBE, EXTENSION, GYRO STABILIZED DRIFT METER |
| MIL-F-3222 Revision F:1991 | FLOODLIGHTS AND LANTERNS, PACKAGING OF |
| MIL-R-16417 Revision J:1986 | REPAIR KIT, CO2, INFLATABLE LIFE PRESERVERS |
| MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
| MIL-B-81820 Revision F:1994 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-P-46111 Revision C:1978 | PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT) |
| MIL-G-52636 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-625/G |
| MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL-I-81454 Base Document:1967 | INDICATOR, GYROSCOPE, VERTICAL REFERENCE ID-1481 (*)/A |
| MIL-P-3584 Revision A:1963 | PLASTIC SHEET, POLYVINYL CHLORIDE, PLASTICIZED, ELASTOMERIC |
| MIL-M-55660 Base Document:1969 | MODULE, IMAGE INTENSIFIER 18 MILLIMETER, TYPE 8857 |
| MIL D 23607 : B | DISCONNECT SWITCHES, AIR OUTDOOR (7.2 KV TO 34.5 KV) |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL-M-50023 Base Document:1959 | MASK, PROTECTIVE, CD V-805 |
| MIL-W-51114 Revision A:1976 | WATER TESTING KIT, CHEMICAL AGENTS, AN M-2 |
| MIL L 15098 : D | LAMP, GLOW |
| GG-P-181 Revision C:1963 | PENHOLDERS (WRITING) |
| MIL-PRF-900 Revision F:1973 | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-M-21039 Revision B:1979 | MAGNIFIER, MEASURING TUBE TYPE, SEVEN POWER AR-60( ) |
| MIL-B-37965 Base Document:1986 | BURS, BONE SURGERY (CORROSION-RESISTING STEEL) |
| MIL-C-42061 Base Document:1988 | CAP, SCREW, BOTTLE AND JAR |
| MIL-R-37624 Base Document:1977 | RACK, TEST TUBE, LABORATORY, WINTROBE, ENAMELLED STEEL, 10 TUBE |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| L-P-391 Revision D:1975 | PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS) |
| MIL-D-63260 Base Document:1980 | DEMOLITION KIT, BLASTING: XM268 (BLASTING AGENT) |
| MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
| SAE AMS G 25871 : 2016 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL-A-52873 Base Document:1975 | ALARM SET, ANTI-INTRUSION (PSID) AN/GSG-151 |
| MIL A 8416 : B | ADAPTER, HEADSET-MICROPHONE MX-1646()/AIC |
| MIL-DTL-27536 Revision C:1995 | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL-T-18232 Revision B:1968 | TARGET, AERIAL, POWERED, DESIGN AND CONSTRUCTION OF GENERAL SPECIFICATION FOR |
| MIL-C-14500 Revision C:1985 | CRADLE, BOAT, STEEL |
| MIL-S-24584 Base Document:1978 | STOPPERS, CARPENTER AND ASSOCIATED BRIDLES (WIRE ROPE AND CHAIN LINK) |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL R 85769 : 1986 | ROCKET MOTOR, MK 117 MOD O |
| MIL I 5184 : B | INDICATOR, POSITION |
| MIL C 22653 : C | CARTRIDGE, IMPULSE, MARK 19 MOD O |
| MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MIL-C-82733 Revision A:1988 | CARTRIDGE, IMPULSE, CCU-22/A/A ASSEMBLY |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| MIL-I-49466 Base Document:1990 | INSULATOR; DISKS, PLATES & WASHERS GENERAL SPECIFICATION FOR |
| MIL-S-20386 Revision D:1977 | STEREOMETER, PHOTOGRAMMETRIC; STEREOCOMPARAGRAPH-TYPE; WITH ACCESSORIES AND CASE |
| MIL-A-45016 Revision C:1985 | ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES |
| MIL-M-22387 Base Document:1964 | MOTOR, ALTERNATING CURRENT |
| MIL-STD-1359 Revision B:1987 | CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
| MIL-P-70343 Base Document:1990 | PACKING, FIBERGLASS, ROPE & WICK |
| MIL M 5755 : C | MIRROR, REARVIEW, NONMAGNETIC, GENERAL REQUIREMENTS FOR [FOR AERONAUTICAL USE] |
| MIL-C-55169 Base Document:1962 | CONNECTORS, ELECTRIC, TYPE "Q", MULTI-CONTACT |
| MIL-S-82562 Base Document:1968 | SENSING CIRCUIT ASSEMBLY LD546972 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MK 444 MOD O) |
| MIL-C-60996 Revision A:1968 | CHARGE, DEMOLITION ROLL, M186 PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL-I-85850 Base Document:1987 | INTEGRATED VOICE COMMUNICATIONS SWITCHING SYSTEM |
| MIL-A-81852 Revision A:1986 | ALTIMETER-ENCODER AAU-32/A |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL-I-22075 Revision C:1984 | Indicator, Bearing-Distance-Heading ID-663D/U |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-V-8712 Revision A:1965 | VALVE, AIR RELIEF, LOW PRESSURE |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL A 5815 : E | ANTENNA, AIRBORNE, UHF - BAND GENERAL SPECIFICATION FOR |
| MIL-G-24717 Base Document:1989 | GASKET, SHEET, REFRIGERATION, NON-ASBESTOS |
| MIL C 55422 : 0 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATIONS FOR |
| MIL-C-51329 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M11 |
| MIL-C-55172 Revision B:1972 | CABINET, ELECTRICAL EQUIPMENT, CY-3397 ( ) /G |
| MIL-H-49225 Base Document:1980 | HEADSET MICROPHONE KIT MK-896A/AIC (COMPONENTS OF) |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| MIL-B-37959 Base Document:1984 | BURS, SURGICAL, TUNGSTEN CARBIDE, (GENERAL REQUIREMENTS FOR) |
| MIL-F-82566 Base Document:1968 | FIRE CONTROL ASSEMBLY LD546992 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-B-43254 Revision B:1970 | BRUSH, ANIMAL GROOMING |
| MIL-B-24692 Revision A:1993 | BREATHING APPARATUS, OXYGEN GENERATING, TYPE A-4 (METRIC) |
| MIL P 21922 : B | PLASTIC RODS AND TUBES, POLYETHYLENE |
| MIL W 28839 : 0 | WAVEGUIDE, ELLIPTICAL GENERAL SPECIFICATION FOR |
| GG O 00588 : C | OPENER, LETTER, HAND, METAL |
| MIL-R-24086 Revision B:1972 | RADIAC SET AN PDR 45 |
| MIL-I-7063 Revision B:1979 | INDICATOR, POSITION, RUBBER TRIM TAB |
| MIL-S-28738 Revision C:1975 | SWITCHING GROUP, RF, AN/UPA-61 |
| MIL-G-45279 Base Document:1975 | GYRO, DIRECTIONAL CN-998( )/ASN-43 |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| GGG-S-00275 Base Document:1965 | SHEARS, BARBERS |
| MIL-I-6533 Revision B:1970 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION TYPE G 10 |
| MIL-R-51198 Base Document:1964 | REPAIR KIT, CBR AGENT SAMPLING & ANALYZING KIT, M32 64 |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| MIL-I-85832 Base Document:1989 | INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET |
| MIL-H-46709 Revision E:1992 | HOWITZER, LIGHT, SELF-PROPELLED: 105MM, M108; AND HOWITZER, MEDIUM, SELF-PROPELLED: 155MM, M109, M109A1, M109A1B, M109A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-B-44315 Base Document:1987 | Body Armor, Chest Plate and Face Shield, Explosive Ordnance Disposal (No S/S Document) |
| GG-R-1638 Revision A:1985 | REMOVAL, DENTAL CROWN (SIMPLEX) |
| DOD-P-15817 Revision D:1976 | PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC) |
| MIL-H-43925 Revision D:1988 | HELMET, FLYER'S, PROTECTIVE, SPH-4 |
| MIL-I-13548 Revision A:1966 | INSULATION SLEEVING, ELECTRICAL (CABLE SPLICING) FT-96, FT-97, FT-98, AND FT-472 |
| MIL-W-52663 Revision A:1075 | WATER PRETREATMENT DECONTAMINATION SET, CB AGENTS, PACKAGING OF |
| GG-R-1549 Revision A:1986 | |
| DOD-M-24672 Base Document:1986 | MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC) |
| MIL-HDBK-692 Revision B:1983 | A Guide to the Selection of Rubber O-Rings |
| MIL-P-53069 Base Document:1987 | POWER PLANT, DIESEL ENGINE, TRAILER MOUNTED 200 KW, 60 HERTZ AN/MJQ-11A |
| MIL-S-6625 Revision A:1953 | SPRAY EQUIPMENT, AIRCRAFT WINDSHIELD, ANTI ICING |
| GG-C-121 Base Document:1959 | CANNULA, BRAIN, FRAZIER |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-H-16384 Revision E:1988 | HYDROMETER SETS AND PARTS, SYRINGE, LEAD-ACID STORAGE BATTERY TESTING |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| MIL L 12626 : NOTICE 1 | LIGHT, SIGNAL (SIGNAL LAMP EQUIPMENT SE-11-()) |
| MIL-C-4952 Revision E:1988 | CARTRIDGES, DESICCANT, DEHYDRATOR |
| MIL-I-81537 Base Document:1967 | IGNITION ELEMENT, ELECTRIC, MARK 13 MOD O |
| MIL-S-70682 Base Document:1990 | SIMULATOR, FLASH, ARTILLERY, M21 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-R-12405 Revision D:1982 | RECORDER, WIND DIRECTION AND SPEED, RO-2/GMQ |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| MIL-M-48386 Base Document:1975 | MINE, APERS, PRACTICE, M68E1 (WITH ACCESSORIES) ASSEMBLING AND PACKING |
| MIL-D-7106 Revision C:1987 | DRIFTMETER, ELECTRICALLY DRIVEN GYRO STABILIZED |
| MIL-R-38162 Revision B:1971 | RADIOSONDE SET AN/AMT 13 |
| MIL-P-46289 Revision A:1964 | PRIMER, PERCUSSION, T79, LOADING, ASSEMBLING AND PACKING |
| MIL-B-55087 Revision B:1982 | BALLOON, METEROLOGICAL, ML-537()/UM |
| MIL-G-0051066 Revision D:1982 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A3 |
| GGG-S-793 Revision A:1964 | STRIPPER, WIRE, BENCH |
| MIL-C-2015 Revision B:1958 | CARRIAGE HOWITZER, 105 MM, M2A2 [W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES |
| MIL-G-23676 Base Document:1963 | GAGE, PRESSURE, DIAL INDICATING, OXYGEN, HIGH PRESSURE |
| MIL-C-426 Revision B:1968 | CARRIER, TIMBER, HANDLED |
| MIL-A-18977 Revision D:1971 | AMPLIFIER CHANNEL (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| MIL G 82639 : 0 | GLOVE ASSEMBLIES, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-S-51368 Revision B:1979 | SHELTER SYSTEM, COLLECTIVE PROTECTION, CHEMICAL-BIOLOGICAL: INFLATABLE, 10-MAN, TRAILER TRANSPORTED, M51 |
| MIL C 22263 : B | COUPLING FUEL LINE, FLEXIBLE, 125 PSI, GENERAL SPECIFICATION FOR |
| MIL-F-21608 Revision E:1979 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
| MIL-S-22824 Revision E:1993 | SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING) |
| MIL-R-55566 Revision C:1986 | REEL, CABLE, RC-435 ( )/U |
| MIL C 0052876 : C | CABINETS, MONITOR, CY 7359/FSS 9(V) AND CY 7361/FSS 9(V) |
| MIL C 5033 : C | CLOCK, AIRCRAFT, CIVIL DATE 24 HOUR DIAL 2 3/4 IN DIAMETER |
| MIL-T-16049 Revision C:1980 | TACHOMETER: ELECTRICAL; SELF GENERATING; MECHANICAL, FIXED MOUNTING AND HAND HELD; AND VIBRATING REED |
| MIL-S-81591 Base Document:1968 | Steel, Investment Castings, Carbon and Corrosion Resisting |
| MIL G 81239 : NOTICE 1 | |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-P-25726 Revision B:1959 | PROBE, TOTAL TEMPERATURE, TYPE MA-1 |
| MIL-F-27630 Revision D:1970 | FILTER-SEPARATOR, LIQUID FUEL FFU-2/E |
| MIL-F-63253 Base Document:1977 | FUSE, BASE DETONATING, M578 LOADING, ASSEMBLING AND PACKING FOR RENOVATION |
| MIL-A-47309 Revision A:1991 | AMPLIFIER, PNEUMATIC |
| MIL S 25073 : 0 | |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-P-2911 Revision A:1957 | PACKING, ASSEMBLY, HYDRAULIC CONICAL AND V TYPES |
| MIL-C-50288-7 Base Document:1970 | CABLE ASSEMBLY T4132-1 |
| MIL M 21602 : 0 | MOTOR, PROPULSION, DIRECT CURRENT |
| MIL-A-24780 Base Document:1992 | ACTUATING ASSEMBLY, SINGLE LINEAR MOTION, FOR THE REMOTE ACTUATION OF QUICK ACTING VALVES, GENERAL SPECIFICATION FOR |
| MIL-T-81914 Base Document:1973 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| MIL-G-52902 Revision A:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, PU-751/M |
| MIL G 24696 : B | GASKET, SHEET, NON-ASBESTOS |
| MIL-B-81819 Revision B:1987 | BEARING, PLAIN, (SLIDING SPHERICAL, SLEEVE & THRUST) SELF LUBRICATING, HIGH SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL-C-23331 Base Document:1962 | CORES FOR SEARCH COIL ASSEMBLIES |
| MIL-P-48655 Base Document:1987 | PISTOL, SEMIAUTOMATIC 9MM; M9 |
| MIL-P-70995 Base Document:1991 | PANEL, CONTROL, ARMAMENT SUBSYSTEM; M21 |
| MIL-T-21578 Revision A:1966 | TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| MIL-R-46204 Revision C:1966 | RELAY, XM9 LOADING, ASSEMBLING AND PACKING |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MIL-P-7204 Revision B:1970 | POWER SUPPLY, 28 VOLT TYPE B 9 |
| MIL-R-49016 Revision A:1981 | RECODER, CODE MATRIX BLOCK LA-434() |
| MIL H 49198 : A | HEADSET-MICROPHONE KIT, MK-1564( )/AIC |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL C 24758 : 0 | CONDUIT, FLEXIBLE, WEATHERPROOF & ASSOCIATED FITTINGS |
| MIL B 8598 : A (1) | BULB, ELECTRICAL RESISTANCE, THERMOMETER, FREE AIR |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL-T-23643 Base Document:1963 | TEST SET, TARGET CONTROL SYSTEM AN/SRM SERIES (AN/SRM-2, AN/SRM-3, AN/SRM-4, AN/SRM-5 AND AN/SRM-6) |
| DOD-W-24644 Base Document:1984 | WELDING MACHINE, ARC, DIRECT CURRENT, 300 AMPERE, VARIABLE VOLTAGE, TRANSFORMER RECTIFIER TYPE, DAMAGE CONTROL, LIGHT WEIGHT, PORTABLE (METRIC) |
| MIL HDBK 157 : NOTICE 2 | TRANSPORTABILITY CRITERIA |
| MIL-R-8903 Revision A:1966 | RESISTOR, VARIABLE, LINEAR PRECISION, TAPPABLE [ASG] |
| MIL-P-53088 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE DRIVEN, TRAILER MOUNTED, 3KW, 60 HERTZ |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| QQ-M-56 Revision B:1960 | MAGNESIUM ALLOY, SAND CASTINGS |
| MIL-T-55659 Base Document:1971 | TEST FACILITIES KIT, MK-994()/AR (UNITS OF) |
| MIL-P-63311 Base Document:1979 | PRIMER, ELECTRIC, M83, LOADING, ASSEMBLING AND PACKING |
| MIL-D-21625 Revision G:1993 | DESIGN AND EVALUATION OF CARTRIDGES FOR CARTRIDGE ACTUATED DEVICES |
| MIL-A-22424 Revision A:1967 | ADAPTERS, COMPENSATING, MS281O7, MA-1 COMPASS SYSTEM |
| MIL-B-38401 Revision A:1973 | BEACON SET, RADIO AN/URT-33 |
| MIL-S-81271 Base Document:1965 | SQUIB, ONE AMPERE, NO FIRE |
| MIL I 6839 : C | INDICATOR, POSITION, LANDING GEAR |
| MIL-P-22497 Revision C:1970 | POWER SUPPLY, TYPE IV (A) (TORPEDO TESTING) |
| SAE AMS 3159 : 2017 | LEAK TEST SOLUTION - LIQUID OXYGEN COMPATIBLE |
| MIL-B-25337 Revision B:1970 | BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| MIL J 83010 : B NOTICE 1 | JACK, AIRCRAFT LANDING GEAR MMU-87/E, 35-TON CAPACITY |
| MIL C 71167 : 0 | CARTRIDGE, 7.62mm, M973 BALL SHORT RANGE TRAINING AMMUNITION, PERFORMANCE SPECIFICATION FOR |
| MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL T 83454 : 0 | TERMINAL, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| MIL-C-19062 Revision C:1977 | CONTROL CABLE ASSEMBLIES AND CONNECTOR PLUGS AND RECEPTACLES (FOR TORPEDOES) |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-S-52547 Revision A:1974 | SUPPLEMENTARY EQUIPMENT, MAINTENANCE COMPANY, PACKAGING OF |
| MIL C 17-112 : A | CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304 |
| GG C 00289 : NOTICE 1 | CHISELS, DENTURE-TRIMMING |
| MIL-S-7014 Revision C:1970 | SOLENOID, FIRING CALIBER .50 GUN 28 VOLT DC TYPE G AND 22 |
| MIL-T-45277 Base Document:1973 | TRANSMITTER, INDUCTION COMPASS T-611 (/ASN) |
| MIL-C-43011 Revision A:1978 | CARRYING CASE, TEST SET, SOIL TRAFFICABILITY |
| MIL-A-37819 Revision A:1978 | ARTICULATOR, DENTAL, PLAIN LINE, LINGUAL ACCESS DESIGN, WITH CONDYLAR AND AUDITORY PINS, AND REPLACEMENT MOUNTING INSERTS |
| MIL-D-537 Revision F:1992 | DISKS, COLOUR STANDARDS |
| MIL C 13113 : B | CHEST SET GROUP AN/GSA-6() |
| MIL-P-27965 Base Document:1967 | PLOTTING SET, THEODOLITE ML-625/GM |
| MIL-B-12841 Revision B:1970 | BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE |
| MIL-S-25345 Revision A:1971 | SWITCH, THERMOSTATIC, TYPE MH-1 |
| MIL-C-83864 Revision A:1982 | CONTAINER, INNER, SURVIVAL KIT |
| GG-M-105 Revision D:1977 | MALLET, ORAL SURGERY |
| MIL-T-27200 Revision C:1975 | TRANSMITTER, RATE GYROSCOPE TRU-2A/A |
| MIL-L-38217 Revision D:1975 | LIGHT, MARKER DISTRESS |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| L-P-600 Revision A:1972 | PORTFOLIO, PLASTIC |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF |
| MIL-H-51166 Revision A:1964 | HOOD, FIELD PROTECTIVE MASK, M6 |
| MIL R 196 : C | REPAIR PARTS, ACCESSORIES, AND KITS, MECHANICAL, PACKAGING OF |
| KK-C-1535 Revision B:1976 | CASE, DISPATCH, MOLDED PLASTIC (METAL FRAME) |
| MIL C 572 : G | CORD, YARNS AND MONOFILAMENT ORGANIC SYNTHETIC FIBER |
| MIL-S-13943 Revision B:1983 | SODIUM SULFATE, ANHYDROUS, TECHNICAL |
| MIL F 11543 : B | FLUXMETER TS-15()/AP |
| MIL-H-21623 Revision B:1990 | HOLDERS, RADIAC SAMPLE |
| MIL-O-16485 Revision C:1962 | OHMMETER, INSULATION RESISTANCE INDICATING, PORTABLE |
| MIL-B-45457 Revision A:1969 | BOMB, FIRE,750-POUND, M116A2 (W/O FUZE COMPONENTS AND FILLING) |
| MIL-S-58112 Base Document:1989 | SLING, MULTI LEG, HELICOPTER, EXTERNAL CARGO |
| MIL-D-55456 Revision B:1969 | DISTRIBUTION BOX, J-1077( )/U DISTRIBUTION BOX, J-2317( )/U |
| MIL D 70603 : A | DETONATOR, STAB, PA523 LOADING, ASSEMBLING AND PACKING |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL V 7560 : C | VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT |
| MIL-C-11782 Revision C:1967 | CAMOUFLAGE NET DRAPE SETS, PACKAGING OF |
| MIL-PRF-82537 Revision A:1988 | CASE, CARTRIDGE, STEEL, SPIRAL-WRAPPED 40 MILLIMETER (MM) AM LARGER CAMBERS, GENERAL SPECIFICATION FOR |
| MIL-B-11839 Revision D:1982 | BAROMETER, ANEROID ML-434/PM |
| MIL-A-82569 Base Document:1969 | ADHESIVE, NEOPRENE BASE, MEDIUM VISCOSITY |
| MIL-F-46298 Revision C:1974 | FIRING DEVICE, PULL RELEASE TYPE, M3 PARTS, LOADING, ASSEMBLING AND PACKING |
| MIL R 49404 : LATEST | REGULATOR, VOLTAGE, BIAS CN-1559/UA |
| MIL-P-21325 Revision A:0196 | POWER SUPPLY FOR TEST SET MARK 281 MOD O |
| MIL C 47070 : 0 | COMPOUND, URETHANE |
| MIL T 49431 : 0 | TEST SET, ELECTRONIC SYSTEM AN/UKM-4()& ADAPTOR, TEST MX-10062/U |
| MIL C 62327 : A NOTICE 1 | CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-S-52697 Revision A:1975 | SURVEYING CONTROL SECTION TRUCK MOUNTED PACKAGING OF |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-D-81068 Base Document:1964 | DEVICE, HIT AND LOCATING (FOR TORPEDO MK 46 MOD O) |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-G-15214 Revision E:1980 | GAGE, DEPTH, WRIST, DIVER'S, SELF LUMINOUS DIAL |
| MIL-P-82563 Base Document:1968 | POWER SUPPLY ASSEMBLY LD546974 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MARK 444 MOD O) |
| MIL-D-48889 Base Document:1976 | DELAY ELEMENT, PA 500, FOR MINE M16 |
| MIL-A-27328 Base Document:1960 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-7 |
| MIL-I-50711 Base Document:1970 | IRON BASE SINTERED METAL BARS (OIL PREGNATED) |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-G-55210 Base Document:1963 | GENERATOR, THERMAL NOISE SG-419 ( ) /U |
| MIL C 19328 : E | CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A |
| MIL-I-5482 Revision C:1960 | INDICATOR, PRESSURE, SYNCHRO, AIRCRAFT 165 DEGREE SCALE |
| AFGS-87234 Revision A:1991 | PERSONAL PROTECTIVE EQUIPMENT, AIRCREW |
| MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
| MIL-A-25487 Revision B:1987 | ANTENNA AT-172()/ARN-14 |
| MIL-P-82427 Revision C:1985 | POWER UNIT (FOR TORPEDO MK 46 MOD 1) |
| MIL L 6363 : G | LAMP, INCANDESCENT, AVIATION SERVICE GENERAL SPECIFICATION FOR |
| MIL-T-23588 Revision C:1974 | TRANSDUCER, PRESSURE |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE AMS G 25667 : 2016 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| SAE AS 13591 : 2001 | CLEANING METHODS &PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
| SAE MA 2150 : 2015 | CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC |
| SAE AS 838 : 2013 | AIRCRAFT HYDRAULIC STARTER/PUMPS |
| SAE AS 8796 : 2013 | HOSE, AIR DUCT, FLEXIBLE, AIRCRAFT |
| SAE AS 708 : 2014 | TOP VISUAL QUALITY (TVQ) O-RING PACKINGS AND GASKETS - SURFACE INSPECTION GUIDE AND ACCEPTANCE STANDARD |
| ASTM PS 106 : 2001 | Provisional Standard Specification for Rods and Tubes of Polyethylene (PE) |
| SAE AMS L P 390 : 2000 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) |
| MIL-S-71146 Base Document:1993 | SIMULATOR, LAUNCHING, ANTI TANK, GUIDED MISSILE & ROCKET M22 PARTS FOR LOADING, ASSEMBLING & PACKING |
| MIL-B-29176 Revision B:1990 | BUILDING, PREFABRICATED, STEEL ARCH, DECONTAMINATION CENTER |
| MIL-I-26382 Revision C:1994 | INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8 |
| MIL-V-24619 Base Document:1983 | VALVE, QUICK CLOSING, FOR SATURATED STEAM SERVICE |
| MIL C 22627 : 0 | COATING, CONFORMAL, RESIN |
| MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
| MIL-P-70735 Base Document:1991 | PAPER, NITROCELLULOSE BASE FOR ARTILLERY PROPELLING CHARGES |
| MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL-D-48888 Base Document:1976 | DETONATOR, FLASH, PA504 FOR MINE, ANTIPERSONNEL, M162A |
| MIL R 63997 : B | RIFLE, 5.56MM: M16A2 |
| MIL-C-70725 Revision A:1993 | CARTRIDGE, 5.56MM, M862 SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL C 71168 : 0 | CARTRIDGE, 7.62mm, M974 TRACER SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL-R-55242 Base Document:1963 | RADIO SET AN/GRC-109 () (UNITS OF) |
| MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING, AND WATERPROOFING, WITH APPROPRIATE TEST METHODS |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-P-52650 Revision A:1975 | PLOTTING INSTRUMENT SET, STEREOPLOTTER, MULTIPLEX LABORATORY, PACKAGING OF |
| MIL-P-43155 Revision F:1984 | PRINTING PLANT, SPECIAL WARFARE, TRANSPORTABLE, (LIGHTWEIGHT) MODEL 800 |
| RR-P-00560 Base Document:1967 | POST, LEDGER AND BINDER, SCREW-TYPE |
| MIL-C-3600 Revision E:1991 | COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF |
| MIL F 87260 : 0 | FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS |
| MIL-A-52628 Revision B:1977 | ANCHOR, PROPELLANT EMBEDDED |
| MIL-C-38226 Revision B:1987 | CONTAINER, POLYURETHANE, RIGID OR ELASTIC FOR PACKAGING SMALL ENGINES |
| DOD D 24599 : 0 | DISSOLVED OXYGEN MEASUREMENT SYSTEM (NAVAL SHIPBOARD USE) (METRIC) |
| MIL-S-51173 Revision A:1964 | SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2 |
| GGG-K-266 Revision B:1964 | KEY, COWL FASTENER |
| MIL C 4710 : D | CASE SET, TRANSPORT AND STORAGE |
| MIL-B-46415 Revision B:1966 | BURSTER, PROJECTILE, M35, PARTS FOR LOADING, ASSEMBLING AND PACKING |
| MIL-S-52729 Base Document:1972 | SURVEYING SET, ASTRONOMIC POSITION, PACKAGING OF |
| MIL-S-82529 Base Document:1968 | SWITCH, THERMAL MARK 56 MOD 1 |
| MIL-A-48690 Base Document:1987 | ACTUATOR, PISTON, PA532 LOADING, ASSEMBLING, AND PACKING |
| MIL-A-23622 Base Document:1963 | ACTUATOR, AIRCRAFT, ELECTRO-MECHANICAL, LINEAR, DIRECT CURRENT |
| MIL H 26633 : C | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN |
| MIL I 5099 : B | INDICATOR CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MIL-F-21241 Base Document:1958 | FILTER, COLOR, FINISHED (FOR OPTICAL INSTRUMENTS) |
| PPP-H-1581 Revision A:1977 | HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF |
| MIL I 25725 : A | INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8 |
| MIL-B-37036 Revision A:1985 | BUR, DENTAL, FINISHING (TUNGSTEN CARBIDE) |
| MIL-T-37318 Base Document:1976 | TEST TUBE, 16 BY 135 MM SCREW CAP DISPOSABLE |
| MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
| MIL-C-24033 Base Document:1964 | |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL-I-81548 Base Document:1967 | IGNITION ELEMENT, ELECTRIC, MARK 22 MOD 0 |
| L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL L 27639 : C (2) | LIFE PRESERVER INFLATING ASSEMBLY FLU-1A/P |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| MIL-W-46646 Revision C:1966 | WARHEAD SECTION, 762-MILLIMETER ROCKET, CHEMICAL AGENT, M190, WITHOUT FUSE |
| MIL-T-12242 Revision A:1963 | TEST SET, TELEPHONE TS-716( )/U |
| MIL T 55095 : 0 | TEST SET, SERVO MODULATOR |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL T 22922 : B | TIMING PANEL ASSEMBLY (TORPEDO KM 44 MOD1) |
| MIL-P-7206 Revision B:1970 | POWER SUPPLY, SILICON RECTIFIER TYPE B 8 |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-C-22912 Revision B:1970 | CONTROLLER, STEERING (FOR TORPEDO MARK 37 MOD 2) |
| MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
| MIL-B-46667 Revision A:1963 | BURSTER, PROJECTILE, M83 LOADING, ASSEMBLING AND PACKING |
| MIL-M-6404 Revision A:1965 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT LIQUID, TYPE F 1 AIRCRAFT FUEL 300 GALLONS PER MINUTE |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| MIL-O-39021 Revision A:1970 | OVEN, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-B-36630 Base Document:1970 | BOX, MICROSCOPE SLIDE, PLASTIC, 5 SLIDE |
| MIL-A-36080 Revision C:1965 | ANESTHESIA SET, ENDOTRACHEAL |
| MIL-M-51113 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, AIRCRAFT, ABC-M24 |
| MIL-B-3630 Revision D:1983 | BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY |
| MIL-T-83720 Base Document:1968 | TRANSFORMER AND INDUCTORS, NONEXPLOSIVE, GENERAL SPECIFICATION FOR |
| MIL-A-81253 Base Document:1965 | ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT |
| MIL-B-43177 Revision B:1977 | BALING PRESSES |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| MIL-F-50519 Base Document:1970 | FUZE, PD, M536, SEPARATION CHARGE FOR LOADING, ASSEMBLING AND PACKING |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| MIL-M-19261 Base Document:1956 | METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE |
| MIL-D-52665 Base Document:1969 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, PHOTOMAPPING COMPANY, PACKAGING OF |
| MIL-B-60075 Revision A:1966 | BOMB, NONPERSISTENT GAS, SPHERICAL, 4.5 INCH, M139; METAL PARTS |
| MIL-H-36364 Revision B:1990 | HOLDER, RADIAC DETECTING ELEMENT, FILM BADGE TYPE |
| MIL-C-6720 Revision C:1964 | CLOCK, AIRCRAFT, ELAPSED TIME, CIVIL DATE 24 HOUR 2 3/4 INCH DIAL |
| MIL-F-21346 Revision B:1976 | FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR |
| L-P-1036 Revision A:1974 | PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL CHLORIDE, RIGID |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| MIL T 4 : L | TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF |
| MIL-B-43401 Base Document:1966 | BOWL, BAPTISMAL |
| MIL-M-71074 Revision A:1995 | MODEM, VEHICLE MOTION SENSOR: 12561737 |
| MIL C 50523 : 0 | CHARGE, DEMOLITION, M112, PARTS FOR & LOADING, ASSEMBLING & PACKING |
| MIL G 8360 : A | GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1 |
| MIL-A-25081 Base Document:1955 | AMPLIFIER, ELECTRONIC CONTROL, 2 CHANNEL, APPROACH AND NAVIGATIONAL, TYPE MB-4 |
| MIL-T-5684 Revision B:1981 | TIE RODS; ROUND AND SQUARE, AIRCRAFT |
| MIL-D-38386 Revision E:1989 | DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| MIL-B-28599 Revision C:1988 | BAG, LINEMAN'S GLOVE |
| MIL-B-2766 Revision C:1987 | BATTING, FIBROUS GLASS, LIFESAVING EQUIPMENT |
| MIL-G-16408 Revision B:1953 | GAGE, LIQUID LEVEL, TAPE AND FLOAT, DIRECT READING (FOR SHIPBOARD USE) |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET & STRIP, POLYMIDE |
| MIL-B-19906 Revision A:1961 | BOMB RACK AND ROCKET LAUNCHER, COMBINATION, AERO 15 SERIES |
| MIL-R-21530 Revision D:1962 | RESOLVERS, ELECTRICAL, AC FOR USE IN POLARIS FLEET BALLISTIC MISSILE WEAPON SYSTEM GENERAL SPECIFICATION FOR |
| MIL-M-5793 Revision A:1954 | MICROPHONE M-3A/A |
| MIL-C-82576 Base Document:1973 | CABLE ASSEMBLY, TEST (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL-A-23282 Revision B:1965 | ACTUATOR |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL S 9479 : C | |
| MIL-C-1258 Revision D:1983 | CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING |
| MIL-T-24632 Base Document:1984 | TELEPHONE SYSTEM, SOUND POWERED, SHIPS SERVICE AN/WTC-2()(V) |
| MIL-A-19401 Base Document:1956 | ACTUATOR, ELECTROMECHANICAL, ROTARY FOR AS-473/ASB-1(BOARD DRAWING 790459,1332290, AZIMUTH TORQUE AMPLIFIER) |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL S 29580 : B | SPECTACLES, AVIATOR'S, MULTIPLE WAVE LENGTH LASER PROTECTIVE, EDU 5 P (WITH CASE) |
| MIL T 6349 : C NOTICE 1 | TEST SET, SYNCHRO |
| MIL-T-47023 Base Document:1974 | TAPE, HEAT SHRINKABLE |
| MIL-M-83524 Base Document:1985 | MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-B-37405 Base Document:1976 | BEAKER, LABORATORY, CONICAL, POLYSTYRENE, DISPOSABLE |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL-H-21722 Revision B:1992 | HOOK, THRUST STABILIZING, JATO-45OO POUNDS NOMINAL THRUST |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| MIL-C-52669 Base Document:1969 | COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| DOD-B-53061 Base Document:1985 | BELTS, V: POLYURETHANE |
| MIL-B-36633 Base Document:1970 | BONE SURGERY SET, EXTENSION AND TRACTION, PIN TYPE, STEINMANN |
| MIL-H-36973 Base Document:1973 | HOLDER, LABORATORY NEEDLE, INNOCULATING KOLLE, 10 INCH |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| MIL-B-37523 Base Document:1976 | BOTTLE SET, PHYSICIAN'S SATCHEL |
| MIL-I-51072 Revision C:1979 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMOURED VEHICLE, M20A1 |
| MIL B 17896 : C | |
| MIL-C-9949 Base Document:1962 | CARDS, COPY |
| MIL-B-3743 Revision D:1967 | BRUSH, ELECTRICAL CONTACT |
| MIL-G-52903 Revision A:1985 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 10 KW, 60 HERTZ, PU-753/M |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| MIL-B-38951 Revision A:1964 | BOMB, LOADING PRACTICE BDU-32/E |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL-B-2029 Revision F:1983 | BURNER ASSEMBLY, SPACE HEATER |
| MIL-B-36829 Revision A:1978 | BUR, DENTAL, EXCAVATING, ENDODONTICS |
| MIL-T-12756 Revision A:1959 | TEST SET, BATTERY TESTER TS-183()/U |
| MIL M 11101 : C NOTICE 1 | MICROPHONES, DYNAMIC |
| MIL A 22641 : D | ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-A-36051 Revision A:1973 | |
| MIL-A-55512 Revision A:1969 | ADAPTOR, CONNECTOR UG-1312 ()/U |
| GG-C-00620 Revision F:1976 | COUNTER, RECIPROCATING, HAND HELD |
| PPP-P-1882 Base Document:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR TEMPLATES, TRIANGLES, CURVES, PROTRACTORS AND RELATED DRAFTING AIDS |
| MIL C 1213 : E | CUPS, GREASE |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-C-55243 Base Document:1963 | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL, QUICK CONNECT AND DISCONNECT, 12 CONTACTS MEDIUM POWER |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL P 19468 : A | PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED & EXTRUDED |
| MIL-F-51095 Revision B:1964 | FILTER MATERIAL, GAS AEROSOL, C18R1 |
| MIL-B-13501 Revision D:1991 | BEARINGS AND BUSHINGS, BRASS AND BRONZE, MACHINED OR FORMED |
| MIL-S-51141 Revision A:1967 | SUIT, PROTECTIVE, IMPERMEABLE, SUPPLIED AIR, M4 |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| PPP P 700 : C NOTICE 1 | PROTECTOR, PACKING LIST |
| MIL C 22244 : D | CARTRIDGE, IMPULSE, MARK 23 MOD O |
| MIL-F-60988 Revision B:1973 | FUZE, PD, M551 LESS BOOSTER |
| GGG-P-453 Revision A:1965 | PLATE, SURFACE, CAST IRON |
| MIL T 82535 : (1) NOTICE 1 | TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY) |
| MIL F 50907 : NOTICE 1 | FIRING DEVICE, ANTI PERSONNEL MINE, XM 123 PARTS & ASSEMBLY |
| MIL-A-49263 Base Document:1982 | ANTENNA AS-2731()/GRC |
| MIL-N-3336 Revision A:1964 | NUT, SHEET SPRING, INSTRUMENT MOUNTING |
| MIL I 49384 : A NOTICE 1 | IMAGER, OPTICAL SU-121/UA |
| MIL I 11405 : B | IGNITER, FIRE BOMB, WP, M23; COMPONENTS FOR |
| MIL-W-55056 Revision C:1982 | WIND MEASURING SET AN/PMQ-6 (UNITS OF) |
| MIL-P-46292 Revision C:1975 | PRIMER, PERCUSSION, MAB1A2, LOADING, ASSEMBLING, AND PACKING |
| MIL-D-16211 Revision D:1962 | DUMMY LOAD, ELECTRICAL, DUMMY ANTENNA TS-235B/UP |
| MIL C 49175 : B | COOLER, CRYOGENIC, MECHANICAL HD-1033B/UA AND HD-1033C/UA |
| MIL-C-23333 Revision B:1969 | CARTRIDGE, IMPULSE, MARK 38 MOD O |
| MIL-C-14613 Revision A:1972 | CHARGER, BOLT, CALIBER .50 BROWNING MACHINE GUN, M10 |
| MIL-R-12499 Revision C:1967 | REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF |
| MIL-S-11141 Revision F:1969 | SMOKE POT, OIL, SGF2, M6 |
| MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL A 18924 : 0 | ARMING CELLS MK 1 MODS 5, 6, 7, AND 8. |
| MIL-P-82494 Base Document:1967 | PACK ASSEMBLY, PARACHUTE MARK 33 MOD O |
| MIL-P-55594 Revision A:1984 | PRINTER, CONTACT, PHOTOGRAPHIC, EN-100() |
| MIL-G-20697 Base Document:1957 | GUN, MACHINE, CAL 50, BROWNING, M2, HEAVY BARREL, ALL TYPES, PACKAGING OF |
| MIL-P-25632 Revision B:1960 | PITOT STATIC TUBE, ELECTRICALLY HEATED, TEMPERATURE CONTROLLED, 115 VOLT, 4OO HZ, TYPE MA-1 |
| MIL-I-25931 Revision B:1964 | INDICATOR, POSITION, LANDING GEAR, SYMBOL-INDICATING, INTEGRALLY LIGHTED |
| MIL-F-8905 Revision B:1967 | FITTINGS AND CARGO RINGS, TIEDOWN, AIRCRAFT FLOOR |
| MIL-S-6551 Revision A:1981 | |
| MIL C 24788 : 0 | COUPLING ASSEMBLY, SEMI-DRY-BREAK QUICK-DISCONNECT, FUEL WITH OR WITHOUT CONTINUITY SWITCH |
| MIL-B-85560 Base Document:1983 | BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING GENERAL SPECIFICATION FOR |
| MIL-R-46089 Revision C:1991 | RUBBER, SPONGE, SILICONE, CLOSED CELL |
| MIL-C-81011 Base Document:1964 | CHARGER, BATTERY, METALLIC RECTIFIER, NAVAL SHIPBOARD, GUIDED MISSILE APPLICATION |
| MIL S 21438 : D | SWITCHES, ROTARY, SOLENOID OPERATED |
| MIL-S-3404 Revision C:1975 | SURVEYING SET, PRECISE BASELINE, SPECIALIZED SET FOR FIRST ORDER ACCURACY, PACKAGING OF |
| MIL-I-46865 Revision B:1991 | INSULATING COMPOUND, ELECTRICAL, EPOXY, COLLOIDAL SILICA FILLED FOR POTTING AND ENCAPSULATION |
| MIL-A-38346 Revision D:1970 | AIR CONDITIONER A/E32C-25 |
| MIL-T-36153 Revision A:1977 | TEST TUBE, HERMATOCRIT DETERMINATION, WINTROBE, DISPOSABLE |
| MIL-C-12539 Revision B:1960 | CHARGER, BATTERY, METALLIC, POWER UNIT, PP-34/MSM |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MIL-C-49468 Base Document:1990 | CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL-I-22027 Base Document:1959 | IGNITER, JET ENGINE, MK 243 MOD 2 |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| GG-O-635 Revision A:1977 | OPTICAL FLATS |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| MIL-C-17112 Revision A:1973 | COPPER-NICKEL-ZINC ALLOY (NICKEL-SILVER): CASTINGS |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL-I-19632 Revision B:1960 | INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND RAG PAPER |
| MIL-A-25915 Revision A:1980 | ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2 |
| MIL D 3377 : A | DIAPHRAGMS, SYNTHETIC RUBBER |
| GG-C-00439 Revision C:1975 | CLIP, SUTURE, MICHEL, 16 MM |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| MIL-T-12400 Revision A:1969 | TEST SET, BATTERY TS-776/U |
| MIL-C-52299 Revision D:1991 | CLAMP ASSEMBLY, TRESTLE BRACING |
| MIL-S-20660 Revision C:1977 | STEREOSCOPE, LENS-PRISM-MIRROR, AERIAL PHOTOGRAPH INTERPRETATION (WITH BINOCULARS AND CASE) |
| MIL C 27889 : D | COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY |
| MIL-P-62669 Base Document:1991 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
| MIL-C-19064 Revision B:1964 | CONNECTOR, OXYGEN HOSE TO REGULATOR |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-S-37453 Base Document:1977 | SHAKING MACHINE, LABORATORY, BLOOD COLLECTING TUBE |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| MIL-D-11381 Revision E:1977 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, HEADQUARTERS AND SERVICE COMPANY, PACKAGING OF |
| MIL-P-5610 Revision D:1968 | PARACHUTE ASSEMBLIES AND MAJOR SUB-ASSEMBLIES, PACKAGING AND PACKING OF |
| FF-P-00416 Revision F:1971 | PIN, SAFETY |
| MIL-B-22036 Revision D:1991 | BRIDLE AND PENDANT ASSEMBLIES, AIRCRAFT LAUNCHING |
| MIL-P-23108 Base Document:1961 | PLUG IN UNIT FOR TEST SET, ECHO SIMULATOR (U) |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| MIL-C-24224 Revision B:1985 | CARTRIDGE, GAS PRESSURE, FOR PRESSURIZING DRY CHEMICAL FIRE EXTINGUISHERS |
| MIL-B-27049 Base Document:1962 | BOMB, LOADING PRACTICE BDU-15/E BOMB, LOADING PRACTICE BDU-16/E |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HAND-HELD |
| DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS |
| MIL-G-36721 Base Document:1970 | GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING |
| MIL-S-19819 Revision C:1974 | SWITCH, FIRING, MARK 8 MOD O AND 1 (INERTIA) FOR EXPLODER MECHANISM MARK 19 SERIES |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-P-82459 Base Document:1966 | PRESSURE TRANSDUCER (FOR TORPEDO MK 46 MOD 0 AND MOD 1) |
| MIL-A-36494 Base Document:1966 | AUDIOMETER, PORTABLE |
| MIL-S-24660 Base Document:1985 | SPRINKLER HEAD, 180 DEGREES FULL CONE |
| MIL-C-55211 Revision B:1969 | CHARGER, BATTERY, PP-1451( ) /G |
| MIL S 52792 : 0 | SURVEY SET, HYDROLOGY, PACKAGING OF |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-L-5057 Revision F:1981 | LIGHT, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL-C-7974 Revision D:1990 | CABLE ASSEMBLIES AND ATTACHABLE PLUGS, EXTERNAL ELECTRICAL POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-21672 Base Document:1958 | ARMING CELL MARK 2 MODS 1 AND 2 |
| MIL-G-17489 Revision B:1961 | GAGE, PRESSURE (AIR), BOILER |
| MIL C 55040 : B NOTICE 1 | CABLE, SPECIAL PURPOSE, ELECTRICAL (RETRACTILE) |
| MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
| MIL K 36311 : C NOTICE 1 | KNIVES, MICROTOME |
| MIL S 22499 : C | SHIM STOCK, LAMINATED |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-P-46121 Revision B:1977 | ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| MIL-I-48145 Base Document:1973 | IGNITER TUBE |
| MIL-I-70534 Base Document:1985 | IGNITER, ELECTRIC MATCH PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-I-23264 Revision A:1968 | INSULATORS, CERAMIC, ELECTRICAL AND ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL-C-48254 Revision A:1984 | CHARGES, EXPELLING, FOR PROJECTILE, 155MM, ILLUMINATING, M485A2 LOADING, ASSEMBLING AND PACKING |
| MIL F 50058 : 0 | FILTER UNIT, GAS AND PARTICULATE, EMD, 5,000 CFM, M12 |
| GG-H-0080 Revision A:1967 | HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE |
| MIL-R-81158 Revision A:1966 | REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1) |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| MIL-V-62038 Revision E:1988 | VEHICLE, WHEELED, PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-W-23068 Base Document:1961 | WAVEGUIDES. RIGID. CIRCULAR. |
| MIL-P-60049 Revision A:1974 | PRIMER, STAB M26 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL-E-3677 Revision D:1993 | ERECTION EQUIPMENT FOR BRIDGE, FIXED, STEEL PANEL, BAILEY TYPE |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
| MIL-G-3787 Revision G:1976 | GLASS, LAMINATED, FLAT [EXCEPT AIRCRAFT] |
| MIL C 82537 : A | CASE, CARTRIDGE, STEEL, SPIRAL WRAPPED 40 MILLIMETER (MM) AND LARGER CALIBERS, GENERAL SPECIFICATION FOR |
| MIL-C-81536 Base Document:1967 | CARTRIDGE, IMPULSE, MARK 105 MOD 0 |
| MIL-F-63070 Base Document:1976 | FUZE, GRENADE, HAND, PRACTICE, M228 CONVERTED LOADING, ASSEMBLING AND PACKING |
| MIL-L-45550 Revision A:1972 | LINK, CARTRIDGE, METALLIC BELT, CALIBER .50, M15A2 |
| MIL-A-52759 Base Document:1973 | ANTI-TANK MINE DISPENSING SYSTEM, PACKAGING OF |
| MIL-S-63523 Revision A:1985 | SIMULATOR, LAUNCHING, ANTI-TANK, GUIDED MISSILE AND ROCKET, M22, PERFORMANCE SPECIFICATION |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING |
| MIL-E-24759 Base Document:1991 | REDUCTOR ASSEMBLY IN-LINE, 90 GALLONS PER MINUTE, PORTABLE AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE |
| GG-B-00821 Revision E:1976 | BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE |
| MIL-R-55348 Revision A:1980 | RADAR SET AN/PPS-5 (UNITS OF) |
| MIL-P-48250 Base Document:1974 | PRIMER, STAB, M55 PARTS AND LOADING, ASSEMBLING, AND PACKING |
| MIL-M-5776 Revision C:1990 | MAINTENANCE PLATFORM, AIRCRAFT ADJUSTABLE, 13 TO 20 FEET TYPE B-2 |
| MIL-G-81168 Base Document:1964 | GYROSCOPE, RATE INTEGRATING |
| MIL-B-83665 Revision B:1981 | BAG, PILOT RELIEF (MALE) |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| MIL-I-7723 Revision B:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION 70 DEG TO PLUS 150 DEG.C DUAL |
| MIL-C-81991 Base Document:1975 | CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR |
| MIL R 26126 : B | RELAY, ELECTRICAL, OVERVOLTAGE DC, GENERAL SPECIFICATION FOR |
| GG W 00101 : C | WASHERS, BEDPAN AND URINAL |
| MIL E 83425 : 0 | EARCUP, SOUND PROTECTIVE MX-8376/AR GENERAL SPECIFICATION FOR |
| MIL-S-58095 Revision A:1986 | SEAT SYSTEM: CRASH RESISTANCE, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR |
| MIL-STD-1475 Base Document:1974 | CONTAMINATION CONTROL TECHNOLOGY PACKAGING PROTECTION OF PRECISION CLEANED MATERIAL |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL-T-55335 Base Document:1971 | TEST FACILITIES KIT, MK-1191 ( ) /AR(UNITS OF) |
| MIL-G-46382 Base Document:1963 | GAGE, SNAP, THREAD ROLL |
| MIL-G-52538 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 10KW 60 HERTZ PU-332A/G |
| MIL-M-55143 Revision A:1966 | MOTOR GENERATOR PU-126 ( ) /U (ROTARY CONVERTER) |
| MIL L 81542 : A | LIFE RAFT, INFLATABLE, ONE MAN, TYPE LR-1 |
| MIL A 51027 : A | ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
| MIL W 23351 : A | WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR |
| MIL-L-44142 Revision A:1986 | LAUNDRY UNIT, TRAILER MOUNTED |
| MIL-S-52781 Revision A:1979 | STRIP, MARKING, ALUMINUM |
| MIL-C-81330 Revision A:1968 | CARTRIDGE, DELAY, MARK 87 MOD O |
| MIL-A-83462 Base Document:1975 | ARCTIC CUSHIONS - CLOTHING, CHU-10/P AND CHU-11/P |
| MIL-A-19642 Revision B:1982 | ALIDADE, TELESCOPIC, MARINE, MARK 8 AND ADAPTER RINGS |
| MIL I 25137 : A | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED, TYPE ME-4 |
| MIL-C-26485 Revision D:1968 | CONTROL ASSEMBLY, ATTITUDE, GYROSCOPIC AF/A24G-1A |
| MIL T 38230 : B (1) | TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE |
| MIL-R-23761 Revision B:1975 | Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for |
| MIL-I-22126 Revision B:1972 | INDICATOR, TORQUEMETER, ENGINE, TURBOPROP |
| MIL-Q-10194 Revision D:1969 | Q METER TS617/U |
| MIL-S-5944 Revision C:1990 | SLING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| GG R 001638 : NOTICE 1 | REMOVAL, DENTAL CROWN, SIMPLEX |
| MIL-I-23366 Revision B:1987 | INDICATOR, HORIZONTAL SITUATION ID-1O13(*)/A |
| MIL-T-12333 Revision C:1969 | TEST SET, CRYSTAL UNIT, QUARTZ TS-710/TSM |
| MIL-I-27280 Revision A:1960 | INDICATOR, INDICATED AIRSPEED AVU-10/A |
| MIL-B-21331 Revision C:1967 | BOILER, STEAM, HIGH PRESSURE, WATER TUBE, FORCED CIRCULATION TYPE, AUXILIARY, NAVAL SHIPBOARD |
| MIL-C-62074 Revision C:1985 | CHASSIS, WEAPON, FULL-TRACKED, M741, AND M741A1; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-I-55493 Revision A:1970 | IMAGE INTENSIFIER ASSEMBLY 40 MILLIMETER, MX-7856/UV |
| MIL C 55446 : A NOTICE 2 | CABLE, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED |
| MIL-A-46655 Revision B:1965 | ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157 PARTS FOR AND PACKING |
| MIL R 83725 : B | RELAY, VACUUM, GENERAL SPECIFICATION FOR |
| MIL C 55425 : C | CABLE, TELEPHONE WF-16 ()/U |
| MIL-P-15742 Revision C:1988 | PLUGS, PLASTIC (HEAT-EXCHANGER-TUBE) |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| MIL-G-52627 Revision A:1971 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5KW 60 HERTZ PU-409A/M |
| MIL-B-37749 Base Document:1978 | BOX PATHOLOGICAL SPECIMEN, SHIPPING |
| MIL A 25088 : C | |
| MIL-T-26639 Revision C:1969 | TESTER, TORQUE WRENCH |
| MIL-W-19088 Base Document:1955 | WATTMETER, SWITCHBOARD TYPE 4-1/2 INCH |
| MIL-M-28519 Revision A:1984 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| MIL-I-6514 Revision B:1988 | INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL H 55460 : A | HEADSET-MICROPHONE H-182()/PT |
| MIL-M-36314 Revision B:1976 | MICROTOME, ROTARY, AUTOMATIC |
| MIL-B-45977 Revision B:1990 | BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF |
| GG-S-773 Revision D:1978 | STRAIGHTEDGES: PLASTIC AND WOOD |
| MIL-R-83520 Base Document:1983 | RELAYS, ELECTROMECHANICAL, GENERAL PURPOSE, NON-HERMETICALLY SEALED, PLASTIC ENCLOSURE (UST COVER) |
| FF-C-88 Revision C:1971 | CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
| MIL-S-55062 Base Document:1959 | SUPPORT, ANTENNA AB-461 ( ) GL |
| MIL-T-0012756 Revision B:1969 | TEST SET, BATTERY (BATTERY TESTER TS 183 () U) |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL-B-36162 Revision C:1987 | BLADES, LARYNGOSCOPE, MILLER |
| H B 00555 : B | BRUSH, SCRUB, VEGETABLE |
| MIL H 26499 : C | HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| MIL-P-20691 Revision C:1987 | PLUG, EXPANSION |
| MIL-S-82567 Base Document:1968 | SPEED CONTROL ASSEMBLY LD546993 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-B-36893 Revision A:1975 | BRONCHOSCOPE, FIBER OPTIC, HOLINGER |
| MIL-T-55441 Base Document:1967 | TOWER AB-585()/G |
| MIL C 25478 : B | COOLER, LUBRICATING OIL, AIRCRAFT ENGINE, SYNTHETIC OIL, GENERAL SPECIFICATION FOR |
| GG-H-1212 Revision A:1975 | HAMMER, REFLEX TESTING, TAYLOR |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| MIL-R-85363 Base Document:1981 | ROCKET MOTOR MARK 23 MODS 2 & 3 |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| MIL-M-13787 Base Document:1954 | MOTOR, ALTERNATING CURRENT, FRACTIONAL HORSEPOWER, SQUIRREL CAGE (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). |
| MIL-E-51223 Base Document:1968 | ENTRANCE, PROTECTIVE, PRESSURIZED, MISSILE VAN, COLLAPSIBLE, M7 |
| MIL M 50512 : 0 | MINE, APERS, PRACTICE, M68 ASSEMBLING AND PACKING |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| SAE AS 6302 : 2016 | TRANSMITTER, PRESSURE, FUEL, 0-600 PSI |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| MIL-P-3819 Revision D:1990 | PNEUMATIC TOOL OUTFIT, 600 CFM, COMPRESSED AIR, PACKAGING OF |
| MIL-I-695 Revision B:1969 | INSULATION, ELECTRICAL, PAPER [SLOT CELL] |
| KK-P-001170 Revision A:1968 | PORTFOLIO, ENVELOPE, LEATHER, ARTIFICIAL LEATHER, SLIDE FASTENER |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| MIL-C-13294 Revision C:1966 | CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PARI, WIRE WD-1/TT AND WD-14/TT |
| MIL F 6001 : A | FITTING, AIRCRAFT, SOLDER TYPE TUBE |
| MIL B 197 : F INT AMD 2 | BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF |
| MIL-P-36907 Revision A:1976 | PIPET-DILUENT, BLOOD, LABORATORY |
| MIL-I-83751 Base Document:1967 | INDICATOR, SAFETY LEVEL, RF |
| MIL C 27715 : 0 | CIRCUIT BREAKER, TRIP-FREE, HIGH TEMPERATURE, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-A-37251 Base Document:1976 | ANTIDOTE, NERVE AGENTS, INJECTOR |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| MIL-A-36644 Base Document:1970 | APPLICATOR SET, PIN RETENTION, DENTAL |
| MIL-G-17787 Revision C:1983 | GAGE, DIAL INDICATING, FURNACE DRAFT |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL-P-38027 Revision A:1973 | PRESSURE INDICATING SYSTEM, HYDRAULIC A/A27 J-1 |
| MIL-S-26716 Revision A:1982 | STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| MIL-V-8965 Revision B:1990 | VALVE CORE, OXYGEN, HIGH PRESSURE |
| MIL-D-45503 Revision A:1961 | DRIVE, HYDRAULIC, T46 |
| MIL S 11086 : D NOTICE 1 | STRAP, HOSE, AND LADDER |
| MIL S 24749 : 0 | STRAPS, ELECTRICAL GROUNDING (METRIC) |
| MIL-M-50974 Revision C:1983 | MOTOR DETONATOR ASSEMBLY, ROCKET, LOADING ASSEMBLING AND PACKING (FOR DEMOLITION KIT, CRATERING M180) |
| MIL-B-13393 Revision E:1986 | BOMB, SMOKE OR INCENDIARY, AN-M47A4, 100 LB; INERT COMPONENTS FOR |
| MIL-P-24396 Revision A:1994 | PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE) |
| MIL-C-11609 Revision E:1972 | CARTRIDGE, IGNITION, M5A2, M6 AND M8 LOADING, ASSEMBLING AND PACKING |
| MIL-F-27656 Revision C:1987 | FILTER UNIT, FLUID, PRESSURE MXU-4O8/M, ABSOLUTE 5 MICRON, HYDRAULIC |
| MIL-C-5026 Revision F:1984 | CUTOUT RELAY, ENGINE GENERATOR |
| MIL-M-55564 Base Document:1969 | MAINTENANCE KIT, ELECTRONIC EQUIPMENT MK-1035/ARC-131 ( ) (UNITS OF) |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-C-172 Revision C:1958 | CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT) |
| MIL T 15659 : H | TERMINAL, LUG, SOLDER, COPPER AND PHOSPHOR BRONZE |
| MIL-A-36955 Base Document:1973 | ANOSCOPE, FANSLER, 6 CM. |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL R 13887 : B | RACE ASSEMBLY, TURRET TRAVERSING, FOR TANKS M46, M46A1, M48, M48A1, M48A2, M103 AND M103A1, PREPARATION FOR SHIPMENT AND STORAGE OF |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL R 21335 : B NOTICE 2 | RELAY, POLARIZED, SENSITIVE, DIRECT CURRENT |
| MIL-T-47051 Revision A:1974 | TUBING, HEAT SHRINKABLE |
| MIL C 46280 : E | CARTRIDGE, IGNITION, M66A1 LOADING, ASSEMBLING AND PACKING |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| MIL R 39032 : D | RESISTOR, PACKAGING OF |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| MIL C 19246 : C | CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A |
| MIL-A-18218 Revision B:1984 | ANALYZERS, FLUE-GAS, ORSAT-TYPE, PORTABLE |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| MIL-C-55398 Base Document:1973 | COMPENSATOR, MAGNETIC FLUX CN-405 ( )/ASN |
| MIL-T-52073 Revision C:1974 | TANK ASSEMBLY, FABRIC COLLAPSIBLE 10,000 GALLON CAPACITY, PETROLEUM PRODUCTS, PACKAGING OF |
| MIL-G-52647 Base Document:1969 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 60 KW, 400 HERTZ, PU-707/M |
| MIL-C-81251 Base Document:1965 | CLOTH, SILICA, PHENOLIC IMPREGNATED |
| MIL-V-82440 Base Document:1966 | VALVE, FUEL INTERLOCK |
| MIL-W-52686 Revision B:1983 | WELDING SET, ARC, INERT GAS SHIELDED PACKAGING OF |
| MIL-M-46696 Revision D:1974 | MINE ANTIPERSONNEL, M16A2, LOADING, ASSEMBLING AND PACKING |
| MIL-S-55094 Base Document:1960 | STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS |
| MIL-A-29423 Base Document:1986 | ANTENNA: AS-()/GRC; MICROWAVE |
| MIL-S-70536 Base Document:1986 | SIMULATOR, TARGET KILL, PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-C-81567 Base Document:1967 | CARTRIDGE, DELAY, MARK 101 MOD O |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERFECTION TESTING |
| MIL-R-11019 Revision B:1955 | REEL UNIT RL&128 ()-G |
| MIL-D-46647 Revision B:1966 | DETONATOR, STAB, XM58, LOADING, ASSEMBLING AND PACKING |
| MIL-B-55130 Revision A:1984 | BATTERIES, RECHARGEABLE, NICKEL CADMIUM SEALED |
| MIL-C-10597 Revision E:1983 | CLEANING COMPOUND WITH CONDITIONER AND INHIBITOR FOR ENGINE COOLING SYSTEMS |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL-S-82489 Base Document:1967 | SWITCH, DRIVER MARK 76 MOD 0 |
| MIL R 14330 : A NOTICE 1 | RIFLE, AUTOMATIC, CAL. .30, BROWNING M1918A2, PACKAGING OF |
| MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
| MIL-G-23723 Base Document:1964 | GYROSCOPE, RATE SWITCHING CN-495/AJB-3 |
| SAE AS 85352 : 2011 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING |
| MIL-A-4637 Base Document:1953 | ATTENUATOR CN 29()/UP, CN-42()/UP, CN-43()/UP |
| MIL-A-83995 Revision A:1984 | AUTOMATED DATA PROCESSING EQUIPMENT, (MAJOR COMPONENTS) PACKAGING OF |
| MIL-T-12681 Revision A:1955 | TEST SET, TELEPHONE (TEST SET TS-190)(/U) |
| MIL-W-81244 Base Document:1965 | WETTING AGENT |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-M-11982 Revision A:1953 | MOUNT, AA, MACHINE GUN, CALIBER .50, M63 (W/SPARE PARTS) |
| MIL-I-25645 Revision D:1970 | INDICATOR, LIQUID OXYGEN QUANTITY, CAPACITANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
| MIL-A-10982 Revision F:1968 | ARMING WIRE ASSEMBLIES |
| MIL W 583 : C | WIRE, MAGNET, ELECTRICAL |
| MIL-M-43248 Revision C:1982 | MATS, REINFORCING, GLASS FIBER |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| MIL-C-8412 Revision B:1969 | COMPASS, MAGNETIC, SLAVED GYRO, TYPE J-4 |
| MIL I 81577 : A | IGNITION ELEMENT, ELECTRIC, MARK 17 MOD 0 |
| GG-S-805 Revision B:1977 | SURVEYOR, DENTAL CLASP |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-DTL-31009 Base Document:1995 | HOOD, COLD WEATHER, SECURITY POLICE |
| MIL-G-25667 Revision B:1970 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| MIL-M-45405 Revision C:1986 | MINE, AT, M21 LOADING,ASSEMBLING AND PACKING |
| MIL I 7069 : A NOTICE 1 | INDICATORS, TACHOMETER, ELECTRIC, PERCENT SPEED TYPE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-O-81151 Revision A:1970 | OSCILLATOR SUBASSEMBLY (NAVORD DWG 1563736)(FOR TORPEDO MARK 37 MODS O, 2, AND 3) |
| MIL I 8136 : A | INDICATOR, FUEL FLOW RATE, SYNCHRO STYLE, SINGLE CLAMP MOUNTED 2 INCH SIZE 300 TO 3,000 PPH TYPE A 12 |
| MIL-D-48865 Base Document:1976 | DETONATOR, ELECTRIC, PA500 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL-M-45013 Revision E:1994 | MACHINE GUN, 7.62MM: M60 |
| MIL-C-7488 Revision A:1974 | COOLERS, OIL, PLATE, AIRCRAFT |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MIL-A-81327 Revision A:1985 | ACOUSTIC LOCATING DEVICE (FOR TORPEDO MK 46 MOD O) |
| MIL-R-6336 Revision D:1970 | RECTIFIER, SILICON, DIRECT CURRENT, TRAINER POWER SUPPLY, TYPE F-1 |
| MIL-R-50813 Base Document:1970 | ROCKET 762MM HE WARHEAD SECTION, M144 LOADING ASSEMBLING AND PACKING |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| MIL-C-19397 Base Document:1956 | COMPENSATOR, INERTIA, FOR AS-473/ASB-1 (BUORD DRAWING 790394 INERTIA COMPENSATING UNIT) |
| GG-B-814 Revision B:1959 | BURNER, ALCOHOL, PRESSURE-TYPE |
| MIL-D-8181 Revision B:1965 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS GENERAL SPECIFICATION FOR |
| MIL-C-23465 Base Document:1962 | CONNECTION, FLEXIBLE, PIPE LOOPS, FOR STEAM TO MAIN AND AUXILIARY TURBINES (SIZES 4 AND 6 INCHES IPS) |
| MIL-P-81237 Base Document:1965 | |
| MIL-F-81150 Revision A:1971 | FILTER, BANDPASS (NAVORD DWG 1653728) |
| MIL-W-17247 Revision B:1974 | WIND MEASURING SET AN/UMQ-5 (COMPONENTS OF) |
| MIL-A-19083 Revision C:1987 | ACOUSTIC DEVICES, MINESWEEPING, A MARK 4 (V) MOD 1 AND MARK 4(V) NM |
| MIL E 82592 : 0 | EXERCISE HEAD, IMPACT, MK 86 MOD O (FOR TORPEDO MK 37 MODS O, 2, AND 3) |
| MIL-I-27665 Revision B:1984 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE ABU-1O/A, -50 DEGREES TO +50 DEGREES C |
| MIL-C-55532 Revision A:1969 | CHARGER, BATTERY PP-1600 ( ) /G |
| MIL-A-82430 Revision A:1968 | ACTUATOR ASSEMBLY (FOR TORPEDO MK 46 MOD 1) |
| MIL-B-5046 Revision D:1968 | BOARD, CHART PLOTTING MARK 7 [ASG] |
| MIL-HDBK-410 Base Document:1973 | CONTAMINATION CONTROL TECHNOLOGY LOGISTIC PROTECTION OF PRECISION CLEANED MATERIAL |
| MIL P 23971 : B | POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| MIL A 24215 : A | ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR |
| GGG-M-125-6 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PAINT SPRAY AND ORGANIC VAPORS) |
| MIL-I-27203 Revision B:1987 | INDICATOR, POSITION, WING FLAP |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| MIL T 45056 : A | TANK RECOVERY VEHICLE,HEAVY N51, PREPARATION FOR STORAGE & SHIPMENT . |
| MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-I-55538 Base Document:1968 | INFLATION LAUNCHING DEVICE, BALLOON, METEOROLOGICAL ML-594( )/U |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-E-5607 Revision F:1983 | ENGINE, GAS TURBINE, PREPARATION FOR STORAGE AND SHIPMENT OF, PROCESS FOR |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL-P-15877 Revision D:1973 | PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) |
| MIL C 70599 : A | CARBINE, 5.56mm: M4 |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL-P-85034 Base Document:1976 | POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN |
| MIL-B-85584 Revision B:1995 | BATTERY RELAY CONTROL UNIT, AIRCRAFT |
| MIL-F-81254 Base Document:1965 | FOAM, URETHANE |
| MIL C 48656 : A | CARTRIDGE, SHOTSHELL |
| MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
| IPC SM 817 : A | GENERAL REQUIREMENTS FOR DIELECTRIC SURFACE MOUNTING ADHESIVES |
| MIL-F-23447 Base Document:1962 | FIRE WARNING SYSTEMS, AIRCRAFT, RADIATION SENSING TYPE, TEST AND INSTALLATION OF |
| MIL-HDBK-87234 Base Document:1976 | PERSONAL PROTECTIVE EQUIPMENT, AIRCREW |
| SAE AMS C 81986 : 1998 | CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS |
| MIL-B-15237 Revision B:1954 | BATHYTHERMOGRAPHS, SURFACE VESSEL |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| MIL-C-1472 Revision F:1978 | COMMISSARY OUTFITS, FIELD BREAKDOWN |
| GGG-M-125-9 Revision A:1982 | RESPIRATOR ASSEMBLIES, AIR LINE, HOOD AND HELMET (FOR ABRASIVE BLASTING OPERATIONS) |
| MIL C 45468 : E | CAP, BLASTING, ELECTRIC, M6 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-A-28768 Revision B:1984 | ANTENNA, FIXED HF, GENERAL SPECIFICATION FOR |
| MIL C 5500 : D | CAPS, HIGH PRESSURE AIR VALVE |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-A-55101 Revision A:1962 | ANTENNA AT-912()/VRC |
| MIL L 7961 : C | LIGHT, INDICATOR, PRESS TO TEST |
| MIL V 9050 : E (1) | VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT |
| MIL M 19863 : D | MOUNT, RESILIENT, TYPE 5B5.000H |
| MIL-D-50281 Base Document:1969 | DISCRIMINATOR, CRYSTAL |
| MIL-S-48107 Base Document:1972 | STRAP ASSEMBLY |
| MIL-A-28772 Revision C:1984 | ANTENNA, HF, FIXED ROTATABLE LOG PERIODIC |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| MIL-L-48176 Revision B:1985 | LINER (TITANIUM DIOXIDE AND WAX) FOR USE IN CARTRIDGES |
| MIL-F-48235 Base Document:1973 | FIRING DEVICE, ANTI PERSONNEL MINE, ELECTRICAL M57E1 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-E-24403 Revision A:1981 | ELECTRODES - WELDING, FLUX CORED, GENERAL SPECIFICATION FOR |
| MIL F 14943 : D | FUSE, GRENADE, HAND, PRACTICE, M228 PARTS FOR, AND LOADING ASSEMBLING AND PACKING |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| MIL-G-52483 Revision B:1980 | GENERATOR SETS GASOLINE ENGINE, TRAILER-MOUNTED 10 KW, 60 HERTZ, PU-619/M |
| MIL-I-6301 Revision B:1994 | INDICATOR, PRESSURE, FUEL O-600 PSI |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL-T-38760 Base Document:1966 | TENSIOMETER DIAL INDICATING |
| MIL-L-81561 Revision G:1994 | LIFE PRESERVER ASSEMBLIES, INFLATABLE, AIRCREWMEN AND PASSENGER, CEMENTED AND HEAT SEALED |
| MIL-C-50261 Revision A:1973 | CARTRIDGE, IGNITION, M285 LOADING, ASSEMBLING AND PACKING |
| MIL-L-83491 Revision A:1978 | LIFE RAFTS, INFLATABLE, LRU-16/P AND LRU-17/P |
| MIL-S-10987 Revision E:1991 | SCALE, PLOTTING, COORDINATE (ALUMINUM, SQUARE, 1,25,000 SCALE AND 1,50,000 SCALE, GRADUATED IN METERS AND YARD) |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-D-51453 Revision A:1986 | DISPERSER, RIOT CONTROL AGENT, PORTABLE, 3 GALLON, M33A1 |
| MIL-A-22337 Base Document:1964 | AMPLIFIER, RESOLVER ISOLATION |
| MIL I 28791 : 0 | ISOLATOR, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| MIL T 13584 : C NOTICE 1 | TREAD RUBBER, FOR RECAPPING PNEUMATIC TIRES, AND SOLID RUBBER TIRES FOR INDUSTRIAL AND TRACK LAYING VEHICLES, PACKAGING AND PACKING OF |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| GG-H-00566 Revision B:1970 | HOLDER, DESK MEMORANDUM PAPER, ROLL TYPE |
| MIL-A-0083216 Revision C:1976 | AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL A 8897 : A | ACCUMULATORS, HYDRAULIC CYLINDRICAL, 3,000 PSI AIRCRAFT TYPE 11 SYSTEMS |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL S 3425 : B | SURVEYING SET, PRECISE LEVELLING, FOR SPIRIT LEVELLING OF SECOND ORDER ACCURACY, PACKAGING OF |
| MIL E 55119 : A | ELECTRO ACOUSTICAL TRANSDUCER EQUIPMENTS |
| AA-B-605 Revision A:1973 | BOX, FILING, STEEL |
| MIL-W-52624 Revision B:1989 | WATER PURIFICATION UNIT & WATER PURIFICATION EQUIPMENT SET, 600GPH PACKAGING OF |
| MIL-A-21059 Revision A:1959 | AEROLOGICAL DISPLAY EQUIPMENT |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL-S-64055 Base Document:1994 | SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE |
| MIL-M-36755 Revision B:1975 | METER, HYDROGEN ION TEST |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-B-23072 Base Document:1961 | BLOWER, ANTI-EXPOSURE SUIT VENTILATION, GENERAL SPECIFICATION FOR |
| MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF |
| MIL P 20664 : C NOTICE 3 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| MIL-T-51289 Revision B:1985 | TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPENSER, HYDROSTATIC-VOLUMETRIC, 6000 PSI, M5 |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| MIL F 14263 : A | FILTER, BAND PASS F-237()/GRC |
| MIL-C-9075 Revision A:1968 | COMPUTER AND TRANSMITTER, TRUE AIRSPEED, PITOT STATIC, 150-900 KNOTS, TYPE MA 1 |
| MIL-L-37661 Base Document:1978 | LOOP, INNOCULATING LABORATORY, QUANTITATIVE 0.01 ML |
| MIL-E-62484 Revision C:1990 | EARTHMOVER, ARMORED COMBAT, M9, PROCESSING FOR SHIPMENT AND STORAGE OF |
| MIL-B-43064 Revision C:1981 | BINDER, LOOSE LEAF (EQUIPMENT LOGBOOK) |
| GG C 871 : C | CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION) |
| MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL L 51167 : A | LABORATORY, CHEMICAL, BASE, M2A1 |
| MIL-R-15041 Revision C:1960 | RELEASE, LIFESAVING EQUIPMENT, HYDRAULIC AND MANUAL |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL B 83054 : B | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL P 18722 : 0 | PYROMETERS, PORTABLE, HANDHELD. |
| MIL C 50872 : C | CARTRIDGE, 40MM, HEDP, M433: LOADING, ASSEMBLING AND PACKAGING |
| MIL-C-11135 Revision E:1984 | CALCIUM HYDRIDE CHARGES ML-304()/TM AND ML-305()/TM AND CHARGE, HYDROGEN GENERATOR ML-587()/TM |
| MIL-A-22889 Base Document:1962 | AMPLIFIER, ERROR LEVEL, ASSEMBLY |
| MIL-F-50990 Base Document:1973 | FUZE, BOMB: MECHANICAL NOSE, THERMALLY PROTECTED, M904E4, ASSEMBLY |
| MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
| MIL-B-45529 Revision B:1974 | BIPOD, RIFLE: M2 |
| MIL-I-38391 Base Document:1965 | INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE) |
| MIL A 83419 : C | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL I 11223 : B | IGNITER, FIRE BOMB, WP, M23 (W/O FUSE) LOADING ASSEMBLY |
| MIL-F-46485 Revision D:1981 | FUZE, BASE DETONATING, M534A1 PARTS WITH DETONATOR |
| GG-B-675 Revision E:1988 | BREATHING APPARATUS, SELF-CONTAINED |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL-P-52897 Revision A:1982 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 10 KW, 50/60 HERTZ, AN/MJQ-18 |
| MIL-C-11218 Revision E:1988 | CONVEYORS, ROLLER AND WHEEL, GRAVITY AND CONVEYER SUPPORTS |
| MIL-R-14224 Base Document:1956 | RECTIFIER, METALLIC, SELENIUM (HIGH TEMPERATURE) |
| MIL-W-25913 Base Document:1957 | WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID, GENERAL SPECIFICATION FOR |
| MIL-D-46206 Revision D:1966 | DELAY OR NON-DELAY ELEMENT, M9 LOADING, ASSEMBLING AND PACKING |
| MIL P 83206 : B | PITOT STATIC TUBE, L SHAPED, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-C-52988 Revision A:1987 | CHAMBER, DECOMPRESSION, DIVERS, 100 PSI |
| MIL-A-22165 Base Document:1959 | AMPLIFIER, COMPASS, SERVO (TYPE MF-1 COMPASS) |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL S 14487 : A NOTICE 1 | SIGHT, COMPUTING, M38, PACKAGING OF |
| MIL C 12386 : E | CLAMP, REPAIR, PIPE: WITH GASOLINE-RESISTANT GASKET, GENERAL SPECIFICATION FOR |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL-M-19249 Revision A:1956 | MOTOR GENERATORS, 300 KW DC TO AC, AC TO DC SUBMARINE SERVICE |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| MIL V 87255 : 0 | VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| MIL P 3627 : D | PENETROMETER, SOIL, DIAL INDICATING [TWO CONES] AND SPRING INDICATING [AIRFIELD CONE] |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL-C-81986 Base Document:1974 | CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| MIL-R-24414 Revision D:1991 | REEL, HOSE, FIRE FIGHTING, MANUALLY OPERATED |
| MIL-C-52093 Revision D:1991 | CRADLE, PONTOON BOAT, HALF SECTION, ALUMINUM HULL |
| MIL-STD-403 Revision C:1992 | PREPARATION FOR AND INSTALLATION OF RIVETS AND SCREWS, ROCKET AND MISSILE STRUCTURES |
| MIL-C-55462 Base Document:1966 | CABLE, TELEPHONE WD-36 ( )/TT DISPENSER, CABLE MX-6894( )/TT & DISPENSER, CABLE MX-6895( ) /TT |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-C-51331 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M13 |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL P 23110 : B | PENDULUM (FOR TORPEDO MARK 44 MODS 0 AND 1) |
| MIL-I-8404 Revision A:1953 | INDICATOR, PRESSURE, SINGLE 0 TO 35 PSI FUEL PRESSURE TYPE C 33 |
| MIL-S-46997 Base Document:1963 | SQUIB, ELECTRIC, M3, MANUFACTURE AND ASSEMBLY |
| MIL I 7491 : B | INDICATOR RATE OF FLOW, FUEL TOTALIZING, SERVO STYLE, TYPE F 1 |
| MIL-I-21685 Base Document:1958 | INDICATOR, COMPASS REPEATER, ROTATING DIAL, TYPE MW-2 |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| MIL-B-37410 Base Document:1977 | BURNER, GAS, LABORATORY AND CARTRIDGE, ASSEMBLY |
| MIL-F-63056 Base Document:1976 | FUZE, GRENADE, HAND PRACTICE, M228 PARTS FOR, AND LOADING ASSEMBLING AND PACKING (RENOVATED) |
| MIL-I-82577 Base Document:1973 | INDICATOR, DIGITAL (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL H 3679 : A | HEADSET, ELECTRICAL |
| MIL-N-3667 Revision B:1984 | NOZZLE, METEOROLOGICAL, BALLOON INFLATION ML-373/GM |
| MIL T 46755 : A | TIRES, PNEUMATIC AND TIRES, SEMI-PNEUMATIC, INSTALLED ON VEHICLES, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-A-48841 Base Document:1975 | ADAPTION KIT, WH, GM, M75 WITH AUXILIARIES PACKAGES 1, 2 AND 4 OF 4 |
| MIL-P-48323 Revision C:1984 | PROJECTILE, 8 INCH, HE, RA, M650 ROCKET MOTOR BODY ASSEMBLY |
| MIL-S-29354 Revision B:1986 | SWITCHBOARD, TELEPHONE SB 3614/TT AUTOMATIC |
| MIL-P-53045 Revision A:1985 | POWER PLANT, ELECTRIC DIESEL ENGINE, TRAILER MOUNTED, 10KW, 400HERTZ, AN/MJQ-25 |
| MIL-A-27261 Revision A:1966 | ACCELEROMETER, AIRCRAFT |
| MIL-C-11743 Revision F:1989 | CASE, MAINTENANCE AND OPERATIONAL MANUALS |
| MIL-T-52735 Revision B:1991 | TRANSPORTER M812 CHASSIS, FOR RIBBON FLOATING BRIDGE |
| MIL R 45378 : B | RECOVERY VEHICLE, FULL TRACKED; MEDIUM, M88; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-STD-758 Revision C:1990 | PACKAGING PROCEDURES FOR SUBMARINE REPAIR PARTS |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| MIL E 21601 : B | EXERCISE HEAD MARK 78 MOD O |
| MIL-B-23306 Revision B:1985 | BINOCULAR, SHIP, 20-POWER AND ACCESSORIES |
| SAE AS 55941 : 2013 | SWITCHES, TOGGLE, ELECTRICALLY HELD, SEALED, GENERAL SPECIFICATION FOR |
| SAE AS 55151 : 2001 | PUMP, HYDRAULIC, RAM, HAND DRIVEN |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| SAE AMS P 46144 : 2015 | PLASTIC SHEET, POLYCARBONATE |
| SAE AS 81765 : 2017 | INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| SAE AMS P 22968 : 2016 | PAPER, RECORDING, HEAT SENSITIVE |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 1567 : 1994 : R2013 | Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-A-27582 Revision A:1963 | ADAPTER, TEST MX-6050/PSM-6 |
| MIL-R-36837 Base Document:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL-C-81268 Revision A:1988 | CLOTH NYLON |
| MIL-T-55655 Revision A:1972 | TEST FACILITIES KIT MK-980 ( ) /PPS-5 |
| MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
| MIL H 44117 : A | HELMET, COMBAT VEHICLE CREWMAN, BALLISTIC SHELL, DH-132A |
| MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
| MIL-A-13092 Revision G:1990 | ADAPTER SET, ENGINE ELECTRICAL TEST |
| SAE AS 8568 : 2012 | BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-P-82691 Revision A:1989 | PROPELLANT GRAIN, IGNITER |
| MIL F 50864 : B | FUZE, PIBD, M549, LESS SPITBACK METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
| MIL-B-81934 Revision B:1991 | BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| GGG-C-475 Revision B:1973 | CLIPPERS, HAIR, HAND |
| MIL-N-6748 Revision A:1968 | NIPPLE, ELECTRICAL TERMINAL |
| MIL S 37062 : B | SPECTROPHOTOMETER, PHOTOELECTRIC |
| MIL-T-81187 Base Document:1966 | TRANSMITTER, RATE OF FUEL FLOW, SYNCHRO TYPE MS90361 |
| MIL-P-70819 Base Document:1991 | PRIMER, ELECTRIC, M128 LOADING, ASSEMBLING AND PACKING |
| MIL-S-81256 Base Document:1965 | SILICA FABRIC, PHENOLIC IMPREGNATED |
| MIL-S-22614 Base Document:1964 | SWITCH, SENSITIVE |
| MIL-S-45179 Revision B:1978 | STITCHER, CEMENTING AND VULCANIZING, AND ROLLERS, HAND |
| MIL-S-45921 Revision A:1993 | STOCK, GUN, SHOULDER: ASSEMBLY W/0 BUTT PLATE, FIBERGLASS REINFORCED, PLASTIC (PREMIX) (FOR RIFLE 7.62MM: M14) |
| MIL-G-23083 Revision C:1972 | GYROSCOPE, RATE SWITCHING MS 17399 |
| MIL-I-25120 Revision C:1993 | INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL-C-85829 Base Document:1989 | COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-P-53123 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| SAE AMS C 8073 : 2013 | CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED GLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| MIL-A-22335 Base Document:1964 | AMPLIFIER, VARIABLE GAIN |
| MIL P 43607 : G | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| MIL-A-25933 Revision B:1985 | ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL |
| DOD K 24674 : 0 | KIT, DISSOLVED OXYGEN (METHOD C), NAVAL SHIPBOARD, (METRIC) |
| MIL-C-13959 Revision B:1976 | CAMERA SET, STILL PICTURE KS-7 |
| MIL-B-43420 Revision A:1970 | BASKETS, WOVEN WIRE |
| MIL-B-37960 Base Document:1984 | BURS, SURGICAL, DIAMOND, GENERAL REQUIREMENTS FOR |
| MIL-T-49057 Revision A:1983 | TEST SET, IFF INTERROGATOR AN/TPM-25A |
| MIL-I-85112 Base Document:1978 | INDICATOR SET, VERTICAL SCALE |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| MIL W 12065 : D | WINCHES, DRUM, HAND OPERATED; SPUR GEAR, 2 OR 3 PURCHASE |
| MIL-T-49435 Base Document:1983 | TEST SET,LASER DETECTING AN/UPM-148() |
| MIL R 900 : F | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-T-11752 Revision B:1961 | TENSION HANDLE, STEEL MEASURING TAPE, SURVEY'S |
| MIL-S-47129 Revision A:1988 | SILICON DIOXIDE, MICROFINE |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| MIL-D-51188 Revision C:1977 | DISPERSER, RIOT CONTROL AGENT, HELICOPTER OR VEHICLE MOUNTED, M5 |
| MIL-C-24756 Base Document:1990 | CURTAINS & BLANKETS, SMOKE, PORTABLE |
| MIL-R-52676 Revision A:1975 | RECTIFIER SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| DD-B-597 Revision A:1976 | BOTTLE, STOPPER, NARROW MOUTH, ROUND |
| MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
| MIL-C-23024 Revision A:1967 | CARTRIDGE, DELAY, MARK 36 MOD 0 |
| MIL-C-55412 Base Document:1965 | CENTER, MESSAGE AN/GSQ-80 |
| GG-B-686 Revision B:1957 | BROACH, ROOT CANAL, DENTAL |
| MIL-F-11137 Revision C:1963 | FILTER, GAS, 150 CFM, M10 |
| MIL-F-62668 Base Document:1989 | FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT |
| MIL-B-23459 Revision D:1988 | BUOY, HOSE SUPPORT, INFLATABLE |
| GG P 001278 : A | PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL |
| GG K 00508 : C | KNIFE, PLASTER, DENTAL |
| MIL-T-3462 Revision D:1976 | THERMOMETER, SELF INDICATING, BIMETALLIC 5 - 1/2 INCH |
| MIL-B-37811 Revision A:1978 | BURS, DENTURE TRIMMING, STRAIGHT HANDPIECE, TUNGSTEN CARBIDE |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| DDD-B-421 Revision F:1967 | BLANKET, BED (OTHER THAN ALL WOOL) |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| MIL-A-27330 Revision B:1987 | ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A |
| MIL-C-82632 Revision A:1983 | CONNECTOR, KIT, SPLICE, SINGLE WIRE |
| MIL-L-741 Revision D:1984 | LEAD, ELECTRICAL, ARC WELDING |
| MIL-P-47099 Revision A:1989 | POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
| MIL-R-22528 Base Document:1964 | RESISTOR, VARIABLE, PRECISION |
| MIL-R-21252 Revision B:1987 | RUBBER SHEET, SOLID, SYNTHETIC, SHIPBOARD WATER EVAPORATOR GASKETING |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| MIL T 49136 : 0 | TEST SET, COUNTERMEASURES SET AN/ALM-178(( |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL-R-51305 Base Document:1969 | RADIOACTIVE TEST SAMPLE, KRYPTON 85, MX7338/PDR-27R |
| MIL-B-4173 Revision B:1969 | BENCH, WORK, GENERAL PURPOSE |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| MIL-S-21433 Revision A:1959 | SOCKETS, TURNBUCKLES, AND TURNBUCKLE ASSEMBLIES - WIRE ROPE, WEDGE AND THREADED LOCK SLEEVE |
| MIL-A-45941 Base Document:1971 | ARMAMENT SUBSYSTEM, HELICOPTER, 7.62 MM MACHINE GUN: DOOR MOUNTED, LIGHT WEIGHT, M23 (LESS M60D MACHINE GUN) |
| MIL-G-45280 Base Document:1975 | GYROMAGNETIC COMPASS SET AN/ASN-430 |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION |
| MIL T 55225 : 0 | TRANSMISSION MEASURING SET TS-559()/FT |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL-H-23799 Base Document:1963 | HOSE ASSEMBLY, METAL, TRANSFER, LIQUID OXYGEN |
| MIL-L-46675 Revision B:1976 | LINK, CARTRIDGE, METALLIC BELT, CALIBER .30, MI |
| MIL-T-26609 Revision C:1994 | TRANSMITTER, POSITION |
| MIL-W-12404 Revision E:1970 | WIND MEASURING SET AN/GMQ-11 (UNITS OF) |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL I 81530 : A | IGNITION ELEMENT, ELECTRIC MARK 11 MOD O |
| MIL V 9439 : D | VALVE, OXYGEN, CYLINDER, HIGH PRESSURE |
| MIL S 18313 : G | SLINGS, CARGO, NET, NYLON WEBBING |
| MIL-B-16041 Revision G:1993 | BUILDINGS, PREFABRICATED, READY-CUT, MAGAZINES, STEEL ARCH, 16- AND 25-FOOT SPAN (EXTENSIBLE) |
| MIL-I-46414 Revision A:1965 | INITIATOR, BURSTER, T7, (M13) LOADING, ASSEMBLING AND PACKING |
| MIL S 3797 : 0 | STAND, MICROPHONE |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| MIL A 22895 : 0 | ADHESIVE, METAL IDENTIFICATION PLATE |
| MIL-P-46901 Revision A:1965 | PRIMER, PERCUSSION, M49 LOADING, ASSEMBLING AND PACKING |
| MIL-A-13196 Base Document:1954 | ATTENUATOR, VARIABLE, CN-7/URA-T1 |
| MIL-S-49038 Base Document:1974 | SHELTER, ELECTRICAL EQUIPMENT S-541()/TTC-38(V) |
| MIL-I-7085 Revision C:1994 | INDICATOR, PRESSURE, ENGINE, 0-50 PSI |
| MIL-G-17594 Revision B:1963 | GROMMET, PLASTIC, UNICELLULAR, HIGH DENSITY |
| MIL-I-21718 Base Document:1958 | INDICATOR, AIRSPEED, PITOT STATIC, MAXIMUM ALLOWABLE SPEED, 4O-4OO KNOTS |
| MIL-I-27552 Revision C:1995 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-15A/A, POTENTIOMETER TYPE, WHITE LIGHTED |
| MIL-D-22962 Base Document:1961 | DIVING APPARATUS, SELF-CONTAINED DEMAND TYPE |
| MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL-S-21277 Revision A:1958 | SWITCH, LIQUID LEVEL, GENERAL SPECIFICATION FOR |
| MIL-R-51344 Revision B:1982 | ROCKET, INCENDIARY, 66 MM TPA 4 ROUND CLIP, M74 OR M74A1 |
| MIL-G-46690 Revision E:1976 | GRENADE, HAND RIFLE, SMOKE, WP, M34 FILLING AND ASSEMBLY |
| ASTM B 894 : 2017 : REDLINE | Standard Specification for ACuZinc5 |
| MIL-S-7470 Revision A:1975 | SHAFT, POWER TRANSMISSION, AIRCRAFT ACCESSORY, GENERAL SPECIFICATION FOR |
| MIL-T-81838 Base Document:1971 | TANK, FUEL, AIRCRAFT, AUXILIARY EXTERNAL 300 GALLON, TYPE AERO 1D |
| MIL-S-63348 Revision A:1981 | SUBMACHINE GUN, 5.56MM, PORT FIRING, M231 |
| MIL-S-29398 Revision C:1984 | SLING SYSTEM, HELICOPTER EXTERNAL CARGO 40,000 POUND CAPACITY |
| MIL-C-23931 Revision D:1985 | CARTRIDGE, IMPULSE, MARK 9 MOD O |
| MIL T 83174 : B (3) | TRANSMITTER, ACCELEROMETER, AXIAL |
| MIL-F-81334 Revision B:1977 | FOAM, PLASTIC, FLEXIBLE, OPEN CELL, POLYESTER TYPE POLYURETHANE |
| MIL-M-45945 Revision A:1994 | MACHINE GUN, 7.62mm: M60D |
| RR-S-001301 Base Document:1967 | SAFETY EQUIPMENT, CLIMBING |
| MIL-I-25482 Revision D:1993 | INDICATOR, ENGINE TESTING |
| MIL-C-23952 Revision C:1992 | CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM |
| PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
| MIL-T-85472 Revision A:1987 | TEST SET, GROUP OQ-169A/DSM-96A |
| MIL-T-22238 Revision H:1987 | TANK, LIQUID STORAGE, METAL FOR PETROLEUM PRODUCTS, HORIZONTAL W/SKIDS, 6OO GALLON CAPACITY |
| MIL-F-10915 Revision L:1972 | FUZE, HAND GRENADE, RIOT, POCKET, CS,M201A1E1, FUZE, FLOATING SMOKE POT, M207A1, AND FUZE, INCENDIARY, M210 |
| MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
| MIL-PRF-25690 Revision B:1993 | PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| MIL-G-49460 Base Document:1986 | GENERATOR, DIRECT CURRENT: G-76B/G |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| MIL-H-58108 Base Document:1986 | HEADSET-MICROPHONE KIT MK-2193/AIC |
| MIL-A-85505 Base Document:1983 | ALTIMETER, STANDBY, TYPES 1 AND 2 |
| MIL-G-49274 Base Document:1984 | GENERATOR, DIGITAL DATA SG-1139()/G |
| MIL L 49434 : NOTICE 1 | LIGHT, AIMING, INFRARED AN/PAQ-4 |
| MIL C 17587 : B | CIRCUIT BREAKER, LOW VOLTAGE, ELECTRIC POWER, AIR, OPEN FRAME, REMOVABLE CONSTRUCTION |
| MIL-I-7112 Revision B:1985 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, CYLINDER HEAD 0 DEGREES C TO 300 DEGREES C |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| MIL-F-50086 Revision A:1960 | FILTER UNIT, GAS-PARTICULATE, TANK, THREE-MAN, 12-CFM, M8A2 |
| MIL-A-22339 Base Document:1964 | AMPLIFIERS, COMPUTATION |
| MIL W 21690 : A | WARHEAD MARK 101 MOD O |
| MIL H 55535 : 0 | HEADSET MICROPHONE KIT MK-1039/G |
| MIL-H-21660 Revision A:1992 | HOOK, THRUST, JATO - 1000 POUNDS NOMINAL THRUST |
| MIL-T-55570 Base Document:1967 | TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF) |
| MIL-R-37198 Base Document:1975 | READER, MICROHEMATOCRIT, SPIRAL TYPE |
| MIL-E-83304 Revision B:1975 | EXTINGUISHER UNIT, FIRE BROMOCHLORODIFLUOROMETHANE, FEU-2/S32P, 40 GALLON CAPACITY, TRUCK MOUNTING |
| MIL-I-27672 Revision B:1987 | INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| MIL-M-29417 Base Document:1984 | MODULE, FUEL PUMP [SIXCON] |
| MIL-A-27670 Revision D:1994 | AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10 |
| MIL-A-83212 Revision A:1976 | ALTIMETER, PRESSURE AAU-27/A |
| MIL-S-0053046 Revision A:1994 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME MR) |
| MIL-G-26988 Revision C:1971 | GAGE, LIQUID QUANTITY, CAPACITOR TYPE TRANSISTORIZED, GENERAL SPECIFICATION FOR |
| MIL-C-22249 Revision B:1989 | CONNECTOR SET, ELECTRICAL, HERMETICALLY SEALED, SUBMARINE |
| SAE AS 5604 : 2012 | COMPASS: MAGNETIC, PILOT'S STANDBY |
| MIL-B-46957 Revision B:1977 | BURSTER, PROJECTILE, M48 LOADING, ASSEMBLING AND PACKING |
| MIL-C-22770 Revision H:1977 | COIL, WIRE |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| MIL-C-22079 Revision C:1985 | CARTRIDGE, IMPULSE, MARK 17 MOD 1 |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-V-23219 Base Document:1962 | VALVE MANIFOLDS, HIGH PRESSURE AIR REDUCING |
| MIL-S-70843 Base Document:1993 | SOLENOID (FOR MACHINE GUN, 7.62MM M240) |
| MIL-F-50576 Base Document:1970 | FLAG, RED, SAFETY PARTS, ASSEMBLY AND PACKING |
| MIL D 26503 : A | DETECTOR, MAGNETIC AZIMUTH AND COMPENSATOR, DETECTOR, MAGNETIC AZIMUTH |
| MIL-I-27680 Revision C:1973 | INDICATOR, ATTITUDE, ARU-12/A, REMOTE |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| MIL-T-49388 Revision A:1983 | TRAY ASSEMBLY, BATTERY CHARGING MX-10154 |
| MIL-B-273 Revision F:1990 | Bag, Drinking Water Storage, Dispensing, Cloth, Cotton Duck, Porous |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-M-49275 Base Document:1987 | MASTS, QUICK ERECT, EXPANDABLE AB-1309(V)/TRC |
| MIL T 52849 : C | TEST KIT, PETROLEUM; AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| MIL C 23216 : C | CONTACTS, ELECTRIC CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-I-27673 Revision C:1993 | INDICATOR, TRUE AIRSPEED AVU-15/A |
| SAE AS 8712 : 2013 | VALVE; AIR RELIEF, LOW PRESSURE |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
| MIL I 27189 : D | INDICATOR, PRESSURE OIL |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL-I-5914 Revision E:1993 | INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| MIL-T-55631 Base Document:1972 | TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR |
| MIL-C-52464 Revision C:1992 | CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER |
| MIL-S-52365 Revision B:1972 | SURVEYING SET, ARTILLERY FIRE CONTROL, FOURTH ORDER, PACKAGING OF |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL-C-12517 Revision A:1965 | CASE, HYDROGEN GENERATOR SET (CASE CY-219 ()/TMQ-3) |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-C-50288-4 Base Document:1970 | CABLE ASSEMBLY T4140 |
| MIL-N-47061 Base Document:1974 | N-PHENYLMORPHOLINE |
| MIL-I-81845 Revision A:1972 | INITIATOR, CARTRIDGE ACTUATED JAU-1/B |
| MIL-S-7877 Revision B:1956 | |
| MIL-A-45947 Base Document:1972 | ARMAMENT SUBSYSTEM, HELICOPTER, 7.62 MM MACHINE GUN: RAMP MOUNTED, LIGHT WEIGHT, M41 (LESS M60D MACHINE GUN) |
| MIL T 25502 : C | TRUE HEADING COMPUTER GROUP AN/AJA-I |
| MIL-C-20061 Revision D:1979 | CLINOMETERS, SHIP, AND ACCESSORIES |
| MIL-B-43998 Revision D:1992 | BATH UNIT, AUTOMATED, MULTI-HEAD |
| MIL W 3970 : C | WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR |
| MIL DTL 0022362 : E | CARTRIDGE, IMPULSE, MARK 18 MOD 0 |
| MIL-M-55336 Base Document:1971 | MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF) |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| MIL-R-37053 Revision B:1978 | REFRACTOMETER, HAND, ALUMINUM |
| MIL-W-45562 Revision C:1992 | WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF |
| MIL-I-27623 Revision C:1972 | INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH |
| ASTM B 102 : 2000 : R2005 | Standard Specification for Lead- and Tin-Alloy Die Castings (Withdrawn 2011) |
| MIL-B-11844 Revision D:1976 | BRIDGE, FIXED: STEEL, PORTABLE PANEL, BAILEY TYPE M2 (WIDENED ROADWAY) |
| MIL-I-25950 Revision B:1967 | INDICATOR, PRESSURE, OIL, 0-100 PSI |
| MIL-I-7087 Revision A:1968 | INDICATOR, PRESSURE OIL, 0-200 PSI |
| MIL-P-49115 Revision A:1977 | PLATOON EARLY WARNING SYSTEM AN/TRS-2() |
| GGG-H-86 Revision C:1963 | HAMMER, HAND, (FORGED STEEL HEAD) |
| MIL-I-7071 Revision B:1972 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL S 24656 : 0 | |
| MIL-I-83117 Revision B:1975 | INDICATOR, ANGLE OF ATTACK |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL-B-3865 Revision D:1990 | BLOCKS, ROPE, TACKLE: PACKAGING OF |
| MIL-B-25846 Revision B:1961 | BOMB, PRACTICE, PROFILE BDU-8/B |
| MIL S 9320 : C | SIGNAL, WARNING, AUDIBLE, FOR HEADSET |
| MIL B 11040 : E | BELT, V: ENGINE ACCESSORY DRIVE |
| MIL-B-27036 Revision A:1962 | BOMB, LOADING PRACTICE BDU-9/E |
| MIL-P-45213 Revision E:1989 | PRESERVATION AND PACKING OF ROCKET AND MISSILE SYSTEMS EQUIPMENT FOR SHIPMENT |
| MIL-M-37217 Base Document:1976 | METER SALINITY INDICATING, ELECTRIC, FLUSH MOUNTING RECTANGULAR |
| MIL-V-45554 Revision D:1989 | VULCANIZING EQUIPMENT, INCLUDING RELATED ITEMS, TIRE AND TUBE, REBUILD AND REPAIR, PREPARATION FOR DELIVERY OF |
| MIL-T-1180 Revision D:1981 | THERMOMETER, SELF-INDICATING LIQUID IN GLASS |
| MIL-T-10767 Revision F:1968 | TOWER (COMPONENTS OF) |
| MIL-H-21594 Revision C:1986 | HOOKPOINT, AIRCRAFT ARRESTING |
| GG-E-671 Revision B:1972 | ERASER, STEEL |
| MIL-S-20197 Revision C:1977 | SCALE, PLOTTING, PRECISION, CENTIMETRES AND INCHES, WITH CASE |
| MIL M 16034 : A | METER, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES) |
| GG-C-106 Revision A:1961 | CALIPER, EYE, CASTROVIEJO |
| MIL-C-60303 Revision B:1971 | CARTRIDGE, 40 MM: RIOT CONTROL, CS, M674 |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| MIL R 0036579 : 0 | ROD, STIRRING, LABORATORY, POLYTETRAFLUOROETHYLENE |
| MIL-R-2784 Revision A:1957 | RULES, SOUNDING, JOINTED |
| MIL S 3405 : B | SURVEYING SET PLANETABLE, SET 8 PACKAGING OF |
| MIL C 26518 : B | CONNECTOR, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTING, 2OO DEGREES C AMBIENT TEMPERATURE |
| GGG-B-001351 Base Document:1968 | BROACH, JEWELLER'S AND PIVOT |
| MIL-T-25485 Revision C:1974 | TRANSMITTER, THRUST, SINGLE SYNCHRO STYLE, PRESSURE RATIO, TYPE MK-2 |
| MIL-C-3779 Revision E:1991 | CASE, ENGINEER BATTALION, DRAFTING EQUIPMENT, CANVAS |
| MIL-C-14039 Revision C:1981 | COMPASS, SUN, UNIVERSAL TYPE 0 TO 90 DEGREES, NORTH AND SOUTH LATITUDES, WITH CARRYING CASE |
| O-F-1044 Revision B:1975 | FUEL, ENGINE PRIMER: COLD STARTING IN PRESSURIZED AND NONPRESSURIZED CONTAINERS |
| MIL-P-50088 Revision A:1960 | PURIFIER, AIR, M2A1 |
| MIL-I-21070 Revision B:1965 | INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
| MIL M 11193 : D | MICROPHONE, CARBON (MICROPHONES M-29) (/U & M-52) (/U) |
| MIL-P-22561 Revision C:1982 | PIPE AND PIPE FITTINGS, ACID RESISTANT |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL-V-18318 Revision B:1966 | VALVE, PRESSURE REGULATING, OXYGEN SYSTEM |
| MIL T 53068 : 0 | TANKS, LIGHTWEIGHT, COLLAPSIBLE, PILLOW, 160 GALLON (NOMINAL), DRINKING WATER |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS |
| MIL-S-53046 Base Document:1984 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME-MR) |
| MIL-T-26963 Revision D:1992 | TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1 |
| MIL-D-771 Revision E:1990 | DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF |
| MIL-L-13078 Revision A:1955 | LOUDSPEAKER, DYNAMIC LS-112/U, LS-116/U, LS-148/U, LS-160/U, LS-179/U, LS-181/U AND LOUDSPEAKER ASSEMBLY LS-154/U AND LS-206/U |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| GG-T-250 Revision A:1974 | TESTER, ANTIFREEZE SOLUTIONS |
| MIL-C-23935 Revision A:1971 | CARTRIDGE, IMPULSE, MARK 47 MOD O |
| MIL R 55083 : A | RELAY ASSEMBLY RE-181/MSA-7 |
| MIL-V-15020 Revision F:1968 | VALVE, FLUSH (SHIPBOARD) |
| MIL-B-40611 Revision C:1972 | BAGGING MACHINE, FRUIT AND PRODUCE |
| AA-S-00300 Revision A Interim Revision:1967 | SHELF, FILING |
| MIL L 25370 : E | LIFE PRESERVER INFLATING ASSEMBLY, MA-1 |
| MIL-C-37722 Base Document:1978 | COVER, SURGICAL INSTRUMENT AND DRESSING CABINET |
| DOD-I-51323 Revision C:1985 | INSECTICIDE, DICHLORVOS, IMPREGNATED STRIP (METRIC) |
| MIL-T-11591 Revision D:1964 | TAMPER, ARMATURE COIL WINDING |
| MIL D 49446 : A | DETECTOR DEWAR DT-591A/UA |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) |
| MIL-M-12563 Base Document:1953 | MANIFOLD, GAS CYLINDER (MANIFOLD ML-344/TMQ-3) |
| MIL-B-1947 Revision A:1960 | BLOWER, SOOT (SHIPBOARD USE) |
| MIL-B-11818 Revision D:1985 | BAROMETER, ANEROID ML-102() |
| MIL F 12548 : A | FILTER, LOW PASS F-215/G AND FILTER, HIGH PASS F-216/G |
| MIL-A-55147 Revision B:1970 | AMPLIFIER-POWER SUPPLY GROUP OA-3633()/GRC |
| MIL-S-48015 Base Document:1972 | STRAP ASSEMBLY |
| MIL-L-45942 Revision A:1976 | LINK, CARTRIDGE, METALLIC BELT, 30MM, XM23 |
| MIL-F-55614 Revision B:1976 | FILTER, INFRARED INTERFERENCE-TYPE (PINK) FOR SEARCHLIGHT, INFRARED 28-VOLT, 110-AMPERE |
| MIL-P-14139 Revision A:1964 | PRIMER, STAB M72 LOADING, ASSEMBLING AND PACKING |
| MIL-B-42027 Base Document:1986 | BROACH, PULP CANAL, BARBED, STERILE |
| MIL-A-23987 Revision A:1989 | A-FRAME, PONTOON TUG: PREFABRICATED, KNOCKED DOWN |
| MIL-A-47074 Revision A:1983 | ADHESIVE SYSTEM, EPOXY, FOR DISSIMILAR METAL BONDING |
| MIL-C-26237 Revision C:1983 | CRADLE, AIRCRAFT-MISSILE COMPONENTS MMU-1/E |
| MIL-G-81065 Revision A:1967 | GYRO-PENDULUM ASSEMBLY (FOR TORPEDO MK 46 MOD O AND MK 46 MOD 1) |
| GG-E-916 Revision F:1987 | EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL |
| MIL C 26516 : 0 | CAP, LUBRICATION FITTING, PROTECTIVE |
| MIL-I-25941 Revision D:1986 | INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-D-11933 Revision B:1955 | DUMMY LOAD, ELECTRICAL A-64/UP |
| MIL-T-60530 Revision A:1971 | TECHNICAL DATA PACKAGE FOR AMC MATERIAL |
| MIL-F-81738 Base Document:1969 | FLARE, AIRCRAFT, PARACHUTE, MK 45 MOD O |
| MIL-S-1419 Revision D:1974 | SIGNAL, ILLUMINATION AIRCRAFT, SINGLE STAR AN/M43A2, AN/M44A2, AND M45A2 LOADING, ASSEMBLING AND PACKING |
| MIL-C-87970 Base Document:1982 | CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129 |
| MIL-H-55351 Base Document:1971 | HEADSET-MICROPHONE KIT MK-1564()/AIC (COMPONENTS OF) |
| MIL H 53076 : 1987 | HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS) |
| MIL-G-27693 Revision A:1962 | GYROSCOPE, DISPLACEMENT SBU-6/A, ROLL AND PITCH |
| MIL-M-29460 Base Document:1990 | MODULE, WATER PUMP (SIXCON) |
| MIL-C-22656 Revision B:1971 | CARTRIDGE, IMPULSE, MARK 44 MOD O |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL L 10911 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE) |
| MIL-G-5678 Revision C:1964 | GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE |
| MIL P 18148 : C | PLUG, ELECTRIC, AIRCRAFT STORAGE BATTERY |
| MIL-I-7084 Revision A:1988 | INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI |
| MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
| MIL-D-51091 Revision J:1986 | DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1 |
| GG-P-133 Revision B:1966 | PEN, RULING, DRAFTSMAN, RAILROAD, SWIVEL BLADE, 5-INCH |
| MIL-T-46555 Revision B:1965 | TRACER, XM10, PARTS FOR, AND LOADING, ASSEMBLING, AND PACKING |
| MIL G 5413 : D NOTICE 1 | GENERATOR, TACHOMETER, FOUR POLE |
| MIL-G-25591 Revision E:1981 | GYROSCOPE, RATE, SWITCHING, TYPE MC-1 |
| MIL-D-26124 Revision B:1977 | DUCT AND DUCT ASSEMBLY, PNEUMATIC, FLEXIBLE |
| GG-B-101 Revision G:1986 | BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED) |
| MIL-M-64016 Base Document:1983 | MOTOR, ROCKET, METAL PARTS FOR AND LOADING ASSEMBLY FOR DEMOLITION KIT, CRATERING M180 |
| MIL-I-2925 Revision B:1967 | INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE |
| LLL-F-00550 Base Document:1964 | FORK AND SPOON, PICNIC (WOOD) |
| MIL-T-7258 Revision B:1985 | TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE TYPE B-4 |
| MIL T 0014358 : B | TELEPHONE SET TA-312()/PT |
| MIL T 25435 : B | TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-38258 Base Document:1965 | INDICATOR, ATTITUDE ARU 18/A DIRECTOR |
| AA-T-2753 Base Document:1991 | TABLE, FOLDING, STEEL TUBE (ADVANCE BASE) |
| MIL-B-11453 Revision A:1958 | BATTERY, STORAGE BB-401()/U |
| MIL-L-6273 Revision D:1983 | LIGHT, NAVIGATIONAL, BEACON, OBSTACLE OR CODE, TYPE G 1 |
| MIL-A-82446 Revision A:1966 | AFTERBODY TEST SET MK 486 MOD 0 (FOR TORPEDO MK 46 MOD 0/1) |
| MIL-T-22755 Revision B:1972 | TAPE, REPAIR, MAGNETIC MINESWEEPING CABLE SHEATH |
| MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
| MIL-G-174 Revision B:1986 | GLASS, OPTICAL |
| MIL R 60346 : C | ROVING, GLASS, FIBROUS (FOR PREPREG TAPE & ROVING, FILAMENT WINDINGAND PULTRUSION APPLICATIONS) |
| MIL S 87966 : NOTICE 1 | SAFETY EQUIPMENT FALL ARRESTING |
| MIL-F-50520 Base Document:1970 | FUZE, PD. M536: DELAY DETONATOR ASSEMBLY FOR LOADING, ASSEMBLING AND PACKING |
| MIL-T-82575 Base Document:1971 | TEST SET, TORPEDO, MARK 281 MOD 1 |
| MIL-I-3825 Revision B:1965 | INSULATING TAPE, ELECTRICAL, SELF FUSING FOR USE IN ELECTRONIC COMMUNICATIONS AND ALLIED EQUIPMENT |
| MIL-T-3351 Revision E:1990 | TRACTOR, FULL TRACKED, LOW SPEED, TRACTOR WHEELED, AGRICULTURAL AND TRACTOR WHEELED, INDUSTRIAL AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-A-27671 Revision B:1965 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-11 |
| MIL P 2693 : C | PACKING MATERIAL, COLD STORAGE DOOR GASKETING, NONWATERTIGHT |
| MIL-F-0051095 Revision F:1983 | FILTER MATERIAL, GAS-AEROSOL, C18R1 2 |
| MIL A 4946 : B | ANTENNA ASSEMBLY AT-197()/GR |
| MIL-L-85824 Revision A:1988 | LIFE RAFT, INFLATABLE, ONE MAN, VEE BOTTOM, LRU-18/U |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| MIL-A-36725 Base Document:1970 | |
| MIL-A-22334 Base Document:1964 | AMPLIFIER, SYNCHRO SERVO, 6 WATT 4OO CYCLE |
| MIL-P-3631 Revision C:1981 | PARALLEL RULER (ROLLING) |
| MIL-C-62279 Revision A:1965 | CHASSIS, TANK, ARMORED VEHICLE, BRIDGE LAUNCHER, M60A1, AND M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG-F-599 Revision B:1988 | FORCEPS, DRESSING, DENTAL |
| MIL-B-28536 Revision C:1989 | BUILDING, PREFABRICATED, READY CUT, METAL, RIGID FRAME, 40 X 100 FEET |
| MIL-H-9859 Revision A:1968 | HANDWHEEL, ORDNANCE |
| MIL-L-6723 Revision C:1987 | LIGHT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL G 6019 : C | GAGE, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN |
| GG-C-611 Revision C:1975 | COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING, BACTERIOLOGICAL |
| MIL-C-62053 Revision D:1985 | CARRIER, GUIDED MISSILE EQUIPMENT M730 AND M730A1 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL G 24211 : 0 | GASKET, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| MIL-S-22224 Base Document:1959 | SENSITIVITY SWITCH MARK 5 MOD 1 |
| MIL-P-11570 Revision C:1984 | PYROMETERS, INDICATING, THERMOCOUPLES |
| W-C-440 Revision B:1970 | CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-O-81375 Revision B:1983 | ORAL INFLATION ASSEMBLIES, SURVIVAL EQUIPMENT, INFLATABLE |
| MIL C 62291 : A | CHASSIS, WEAPON, FULL TRACKED, F12253500 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-13626 Revision B:1976 | TELEPHONE SET TA-1()/PT |
| MIL C 8073 : D | CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED CLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS |
| MIL S 49166 : A | SCANNER, MECHANICAL, MX-9872(V)/UA, GENERAL SPECIFICATION FOR |
| MIL-S-2607 Revision A:1952 | SAMPLER, BUTTER LARD MEAT |
| MIL-D-60448 Base Document:1968 | DETONATOR, ELECTRIC M78, PARTS AND LOADING, ASSEMBLING, AND PACKING |
| MIL-B-45530 Revision A:1988 | BOOSTER, AMMUNITION, ELECTRIC, CALIBER .50 |
| GG-B-001294 Base Document:1967 | BURNISHER, RENTAL |
| MIL-B-14036 Revision E:1992 | BRACKET, OUTBOARD MOTOR: BOW ATTACHMENT; 12-TON PNEUMATIC HALF FLOAT |
| MIL-T-13133 Revision C:1981 | THERMOMETERS, SELF INDICATING, LIQUID-ON-GLASS ML-438/PMQ-1, ML-439/PMQ-1, ML-440/PMQ-1 AND ML-488/PMQ-1 |
| MIL T 14703 : NOTICE 1 | TIMER, INTERVAL DUMMY, XM 10 AND POWER SUPPLY, DUMMY PS406D ASSEMBLY |
| MIL-S-63433 Revision D:1989 | SIMULATOR, ARTILLERY FLASH, M21, PERFORMANCE SPECIFICATION FOR |
| MIL-A-14053 Revision C:1977 | ANTENNA AT-450( )/ARC |
| GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL-C-22845 Revision A:1968 | CARTRIDGE, RELAY, MARK 35 MOD O |
| UU-P-221 Revision B:1972 | PAPER, DIRECT POSITIVE SENSITIZED (DIAZOTYPE) |
| MIL-C-45404 Revision A:1972 | CLIP, CARTRIDGE, 7.62MM, 5 ROUND |
| MIL-B-11353 Revision D:1976 | BRIDGE, FLOATING: ALUMINUM; FOOT, PACKAGING OF |
| MIL-W-50915 Base Document:1971 | WARHEAD SECTION, 762MM ROCKET HE M6A1 LOADING ASSEMBLING & PACKING |
| MIL-S-20441 Revision C:1974 | SIMULATOR, FLASH ARTILLERY, M110 PARTS, AND LOADING, ASSEMBLING AND PACKING |
| MIL-F-46470 Revision D:1972 | FUZES, PD, M525 AND M527B1, HEAD ASSEMBLY FOR |
| MIL-S-82487 Base Document:1967 | SWITCH, SQUIB MARK 65 MOD 0 |
| MIL-STD-129-2 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - MEDICAL MATERIAL |
| MIL-E-24715 Base Document:1989 | EXTINGUISHERS, FIRE. VAPORIZING LIQUID (BROMOCHLORODIFLUOROMETHANE, HALON 1211) |
| MIL-C-53050 Base Document:1985 | CAMOUFLAGE KIT, GROUND LAUNCHED CRUISE MISSILE (GLCM) SYSTEM |
| MIL-A-38345 Revision E:1988 | AIR CONDITIONER A/E32C-24 |
| MIL-I-27619 Revision G:1974 | INDICATORS, ATTITUDE DIRECTOR |
| MIL-P-24587 Base Document:1979 | POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD) |
| MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
| MIL-C-5414 Revision G:1993 | COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P |
| MIL-B-4792 Revision E:1994 | BUMPER, RUBBER, DUPLEX ROUND |
| MIL-I-16103 Revision F:1983 | INDICATOR, PHASE SEQUENCE, SWITCHBOARD & PANEL |
| MIL H 87961 : NOTICE 2 | HOSE AND HOSE ASSEMBLIES, AIR DUCT, AIR BREATHING, OXYGEN SYSTEM GENERAL SPECIFICATION FOR |
| MIL-T-58082 Revision A:1974 | TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A |
| MIL F 83670 : NOTICE 1 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| MIL-M-55289 Revision A:1984 | MODIFICATION KIT MK-710 ( )/TMQ (UNITS OF) |
| PPP-C-1752 Revision D:1989 | CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM |
| MIL-G-52857 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 400 HERTZ, PU-732/M |
| MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
| MIL-T-52809 Revision A:1986 | TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC |
| MIL W 6496 : B NOTICE 1 | WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1 |
| MIL-F-26862 Revision B:1970 | FIBERBOARD, SOLID, NON-CORROSIVE, FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS |
| MIL-F-51216 Base Document:1965 | FILTER UNIT, GAS-PARTICULATE, EMD, 600 CFM, M9A2 |
| MIL-A-55368 Base Document:1972 | AIRBORNE DATA ANNOTATION SYSTEM AN/AYA-10() |
| MIL-L-19844 Revision A:1963 | LEAD; SHIELDED, DETACHABLE IGNITION |
| MIL-C-6092 Revision A:1960 | COMPUTER, AIRCRAFT LOAD BALANCING |
| MIL-G-52773 Revision A:1977 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60KW 50/60 HERTZ PU-650B/G |
| MIL-T-81490 Revision A:1991 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| MIL-T-49243 Revision A:1988 | Test Set, Telephone, TS-3647/G (No S/S Document) |
| MIL G 21480 : A | GENERATOR SYSTEM, 400 HERTZ ALTERNATING CURRENT, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-S-71076 Base Document:1993 | SERVOVALVE ASSEMBLY, AZIMUTH: 12561758 |
| MIL I 27851 : B | INDICATOR, INDICATED AIRSPEED AVU-17/A |
| MIL-T-25307 Revision D:1985 | TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1 |
| MIL-I-55633 Base Document:1968 | INDICATOR, PANORAMIC IP-173 ( )/U |
| MIL-I-25437 Revision B:1984 | INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-52965 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM (TSS), DIRECT SUPPORT SECTION, TRUCK MOUNTED |
| MIL A 25949 : E (2) | ACCELEROMETER, AIRCRAFT RANGE -5 TO PLUS 1OG UNITS, INTEGRALLY LIGHTED |
| MIL-T-49269 Base Document:1984 | TEST SET, RADIO, AN/PRM-34 |
| MIL-T-12424 Revision D:1968 | TEST SET, ELECTRON TUBE TV-7 ()/U |
| MIL-C-50458 Base Document:1969 | CASE, CARTRIDGE, COMBUSTIBLE, XM157E1, 152MM, PARTS FOR |
| MIL-P-12965 Base Document:1953 | POWER SUPPLY (RECTIFIER POWER UNIT RA-61) AND MOUNTING FT-414 |
| MIL C 18266 : A | CORD, P/O 87B/U |
| MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
| MIL-T-8249 Revision B:1979 | TRANSMITTER, RATE OF FLOW, FUEL, TYPE MB-2 |
| MIL-R-51197 Revision B:1976 | REAGENT, SOLVENT, & TEST PAPERS FOR SAMPLING & ANALYZING KIT, M33 |
| MIL-P-10096 Revision E:1985 | PRINTER, CONTACT, PHOTOGRAPHIC PH-649()/U |
| MIL-I-7075 Revision A:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION -50 DEGREES TO +50 DEGREES C 2 INCH SIZE |
| MIL-T-4782 Revision C:1972 | TRANSPARENCIES, TECHNICAL TRAINING, GENERAL SPECIFICATION |
| MIL-R-17729 Revision C:1972 | RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-P-63235 Base Document:1979 | PROJECTILE, GUIDED, 155 MM, XM712, THERMAL BATTERY FOR |
| MIL S 55507 : E (2) | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT), PACKAGING OF |
| MIL-A-58066 Revision A:1966 | ALTIMETER, PRESSURE, PARACHUTIST'S |
| MIL I 87108 : A | INFLATION ASSEMBLY, FLU-2A/P |
| MIL-M-55233 Base Document:1963 | MICROPHONE M-33A/A1C |
| MIL-I-8974 Revision A:1981 | INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR |
| MIL-T-49447 Base Document:1988 | TEMPERATURE SENSOR, RESISTANCE |
| MIL-A-11928 Revision B:1960 | AXLE-RL-27( ) (FOR LAYING FIELD WIRE) |
| MIL-B-37246 Base Document:1975 | BRACE, BIT, BONE, CRANIAL, HUDSON, AND BURS, DRILL, AND EXTENSION |
| MIL-T-52015 Revision B:1976 | TEMPLATE DRAFTING, MAP SYMBOL, FOR PLASTIC SCRIBING |
| GG-C-1213 Revision A:1977 | CURETTE, EAR, BILLEAU |
| MIL-T-14605 Revision A:1967 | TRANSFORMER UNIT, GENERAL SPECIFICATION FOR |
| MIL-B-55118 Revision A:1971 | BATTERIES, STORAGE, (CELLS) VENTED, NICKEL CADMIUM |
| AA-B-450 Revision B:1974 | BLACKBOARD, PORTABLE |
| GG-D-1958 Base Document:1975 | DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED) |
| MIL-P-551 Revision E:1983 | PIPES AND ELBOWS, AIR CONDITIONING-HEATING |
| MIL T 37628 : 0 | TEST TUBE, 18 BY 116 MM POLYCARBONATE, CLEAR |
| MIL-S-51244 Revision A:1976 | SERVICE KIT, PORTABLE FLAME THROWER, RIOT CONTROL AGENT DISPERSER, M27 |
| MIL-I-20037 Revision B:1984 | INDICATORS, SIGHT, LIQUID LEVEL, DIRECT INDIRECT READING, TUBULAR GLASS PLASTIC |
| MIL-P-55624 Base Document:1971 | PROTECTOR, ELECTRICAL COMMUNICATION CIRCUITS GENERAL SPECIFICATION FOR |
| MIL-R-8791 Revision D:1982 | RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN |
| MIL-I-5416 Revision B:1962 | INDICATOR, INDICATED AIRSPEED 10-150 KNOTS |
| AA-S-271 Revision D:1967 | SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE |
| MIL-H-11190 Revision D:1970 | HEADSET, ELECTRICAL AND HEADSET MICROPHONES |
| MIL S 28786 : B | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-C-52668 Base Document:1969 | CARTOGRAPHIC SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKAGING OF |
| MIL-V-0050010 Revision A:1969 | VALVE, ANTIBACK DRAFT, PROTECTIVE SHELTER, M2 |
| MIL C 71186 : 0 | CARBINE, 5.56MM: M4A1 |
| MIL M 10304 : E | METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR |
| MIL-A-28624 Revision B:1984 | AUGER, EARTH, PORTABLE; HAND-HELD, TWO-MAN, GASOLINE-ENGINE DRIVEN |
| MIL P 46917 : C | PRIMER, PERCUSSION, M34 LOADING, ASSEMBLING AND PACKING |
| GG-R-1472 Revision B:1987 | RETAINER, MATRIX, DENTAL (TOFFLEMIRE) |
| MIL-A-50093 Revision A:1964 | ADAPTER, COMPRESSED AIR BREATHING APPARATUS, M4 |
| MIL-B-27044 Revision C:1968 | BOMB, PRACTICE BDU-12/B |
| DOD-T-17412 Revision C:1978 | TEST KIT, WATER, ENGINE COOLING SYSTEMS (METRIC) |
| MIL C 2156 : C | CHARGE, DEMOLITION, SHAPED, 15LB PRACTICE M2A3 AND HE, M2A4 LOADING ASSEMBLY AND PACKING |
| GGG-C-746 Revision G:1979 | CUTLERY, GALLEY AND KITCHEN (CLEAVER, FORKS, KNIVES, SPATULAS, STEEL AND SERVER) |
| MIL T 26898 : B | TEST SET, AIRFIELD LIGHTING SYSTEMS, TYPE MM-1 |
| MIL-T-11157 Revision B:1963 | THEODOLITE, DOUBLE CENTER ML-474/GM |
| MIL D 70436 : 0 | DETONATOR ASSEMBLY FOR FUZE, POINT DETONATING, M759 |
| MIL-P-14250 Revision C:1981 | PIN, STRAIGHT, HEADED AND PIN, STRAIGHT, HEADLESS, SLOTTED TEMPLET STUD |
| MIL L 25866 : B | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A |
| MIL M 22661 : A NOTICE 1 | MOTOR AND TERMINALS ASSEMBLY |
| MIL-P-14313 Revision D:1972 | PISTOL AND REVOLVERS, PACKAGING OF |
| MIL-R-45306 Revision D:1991 | RADIATOR, ENGINE COOLING, INDUSTRIAL |
| MIL-C-22585 Revision A:1984 | COMPUTER, PRESSURE REDUCTION, METEOROLOGICAL CP-402/UM() |
| MIL-B-55290 Base Document:1964 | BATTERY, WATER ACTIVATED BA-380 /AMQ-9 |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-J-12959 Revision E:1990 | JETTING SET, PORTABLE, FOR PILE-DRIVING OPERATION, PACKAGING OF |
| MIL-P-25515 Revision C:1968 | PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBER BASE, LAMINATED |
| MIL-B-20100 Revision C:1968 | BRUSHES, CLEANING, FOR BORE, CHAMBER AND FIRING PIN HOLE OF SMALL ARMS |
| MIL-C-11233 Revision J:1984 | CARTRIDGE, PHOTOFLASH, M112A1 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-C-45474 Revision B:1969 | CHARGE, SPOTTING, FOR WARHEAD, M38 FOR 762MM ROCKET LOADING, ASSEMBLING AND PACKING |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| MIL T 28679 : A | TESTER, ANTIFREEZE AND BATTERY ELECTROLYTE SOLUTION |
| MIL-I-27667 Revision C:1990 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, EHU-16/A MULTIFUNCTION -70 DEGREES TO +150 DEGREES C |
| MIL-P-40619 Revision B:1991 | PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) |
| MIL-C-44009 Revision A:1982 | CHARGER, BATTERY, PP-7562/U |
| MIL B 51322 : NOTICE 1 | BOMB, FIRE, 500 POUND BLU-11/B |
| MIL-P-19152 Revision A:1974 | PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS) |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| MIL-I-23524 Revision A:1986 | INDICATOR, ATTITUDE DIRECTOR, REMOTE, ID 1329A (V) |
| MIL-R-83404 Base Document:1973 | ROCKET MOTOR MANUFACTURING ROCKET MOTOR SR110-AD-1 |
| MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
| MIL C 82624 : A | CELL, STORAGE, NICKEL-CADMIUM (FOR TALOS MISSILE) |
| MIL-L-24778 Base Document:1992 | LIFE PRESERVER, UTILITY, AUTO INFLATABLE, MK 5, MOD 0 |
| MIL P 4846 : C | POWER SUPPLY, SILICON RECTIFIER, 28V 300 AMP OUTPUT TYPE ME 1 |
| MIL-A-53099 Base Document:1990 | ARCTIC FORWARD AREA REFUELLING EQUIPMENT (AFARE) |
| MIL-F-38762 Base Document:1966 | FLUORESCENT PENETRANT INSPECTION UNITS |
| MIL-V-85830 Base Document:1989 | VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL C 25666 : E (1) | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL-C-52370 Revision A:1978 | CASE, COMPUTER SUPPLIES, CARRYING |
| MIL-P-12808 Revision F:1991 | PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF |
| MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-I-23832 Revision A:1980 | INDICATOR, TACHOMETER, TRIPLE POINTER, HELICOPTER |
| MIL V 3155 : C | VALVE, TEMPERATURE REGULATING VENTILATION HEATER, STEAM CONTROL, NAVAL SHIPBOARD USE |
| MIL-I-81049 Revision A:1972 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION |
| MIL-P-46994 Revision B:1982 | PELLETS/GRANULES BORON/POTASSIUM NITRATE |
| MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| MIL-S-83519 Revision A:1984 | SPLICE, SHIELD TERMINATION, SOLDER STYLE, INSULATION, HEAT SHRINKABLE, ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| MIL-T-10629 Revision C:1978 | T-SQUARE [STEEL] |
| MIL-B-36772 Base Document:1972 | BOLT, TIBIAL |
| MIL C 0028830 : A | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| MIL-T-52877 Revision B:1980 | TRANSMISSION GROUP DATA: TRANSMITTER, DATA: T 1257/FSS 9(V) AND RECEIVER, DATA: R 1861/FSS 9(V) |
| MIL T 55103 : A NOTICE 1 | SPECIFICATION FOR TEST SET, ELECTRICAL POWER AN/UPM-93() |
| MIL I 27190 : B | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| MIL-G-52622 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED, 5KW 60 HERTZ PU-631/G |
| MIL-T-49110 Base Document:1977 | TELEPHONE SET TA-838 ()/TT |
| MIL-T-6598 Revision F:1994 | TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A |
| MIL-T-49117 Base Document:1977 | TEST SET, RECEIVER TS-3565( )/TRS-2 |
| MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
| MIL-I-7802 Revision A:1967 | INDICATOR, MS 28088, TURN AND SLIP [THREE PHASE] |
| MIL-M-55554 Revision A:1969 | MODULE, IMAGE INTENSIFIER 25 MILLIMETER, TYPE 8585 |
| MIL-D-38134 Revision A:1971 | DETECTOR, MAGNETIC AZIMUTH DSU-4/A, HIGH TEMPERATURE |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| MIL-A-14295 Revision C:1985 | ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
| MIL M 17191 : D | MOUNT, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
| MIL-P-38268 Revision C:1988 | AURAL PROTECTORS, SOUND |
| MIL-T-55369 Base Document:1972 | TEST SET, RADIO TS-1588 ( ) /AC |
| MIL-C-49085 Base Document:1976 | CHARGER, BATTERY PP-7311/PAS-7 |
| GG-I-550 Revision B:1974 | INKING PAD, OFFICE TYPE NUMBERING MACHINE |
| GG-C-1320 Revision B:1985 | CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM) |
| MIL-T-5420 Revision B:1970 | TUBE, PITOT STATIC, ELECTRICALLY HEATED, AIRCRAFT |
| MIL-R-10882 Revision D:1969 | RECORDED, RADIOSONDE AN/TMQ-5 (UNITS OF) |
| MIL-S-5733 Revision B:1952 | SOLENOID, FUSE ARMING, TYPE F AND 1 |
| H-B-401 Revision C:1964 | BRUSHES, MUCILAGE AND PASTE |
| MIL-R-17772 Revision C:1982 | RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| MIL A 24625 : 0 | ANODES, CORROSION PREVENTIVE, PLATINUM PLATED NIOBIUM WIRE TYPE, CATHODIC PROTECTION |
| K-B-1069 Revision A:1972 | BASKET, FRAME MOUNTED |
| MIL-A-18850 Revision C:1970 | AMPLIFIER, SERVO (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| GG-P-725 Revision B:1978 | |
| GG-B-140 Revision D:1986 | BATH, WATER, DENTAL IMPRESSION COMPOUND |
| MIL-B-208 Revision D:1970 | BATTERY, STORAGE, LEAD ACID, AUTOMOTIVE AND NAVY PORTABLE (EXCEPT AIRCRAFT), PACKAGING AND PACKING OF |
| MIL L 6484 : C | LIGHT, COCKPIT UTILITY, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL R 6466 : B NOTICE 1 | RELAY, ARMATURE, EXCITER PROTECTION, TYPE A-1 |
| KKK-L-370 Revision D:1988 | LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC) |
| MIL-C-10244 Revision G:1970 | CRYPTOGRAPHIC EQUIPMENT DESTROYER, INCENDIARY, TH4, M2A1 |
| MIL B 83771 : A | BATTERY, REMOTELY ACTIVATED SUBMINIATURE RESERVE PRIMARY |
| MIL-M-46985 Revision D:1969 | MINE, CHEMICAL AGENT, VX, M23; INERT COMPONENTS |
| MIL-G-16567 Revision D:1990 | GRIP, CABLE |
| MIL P 47104 : A | POTTING COMPOUND, EPOXY RESIN, THERMOSETTING |
| MIL-T-22939 Revision B:1972 | TEST SET, TORPEDO, MARK 393 MOD O |
| GG-C-1282 Revision C:1985 | CURETTES, ALVEOLAR (MOLT AND MILLER) |
| MIL-M-0050079 Revision E:1968 | MASK, PROTECTIVE, FIELD ABC-M17 |
| MIL-I-23208 Revision A:1962 | INDICATORS, SIGHT, LIQUID, REFRIGERANT |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-D-52838 Base Document:1974 | DIVING EQUIPMENT SETS, PACKAGING OF |
| FF-H-1687 Revision A:1974 | LOCKS, OFFICE MACHINE |
| MIL-P-87133 Base Document:1978 | PLOTTER, COMBAT MISSION PLU-6/C (AIR NAVIGATION) |
| MIL-E-6719 Revision A:1972 | ELBOW; ELECTRICAL CONDUIT |
| MIL F 15160/28 : A NOTICE 1 | FUSE, STYLE F28 |
| GG-S-590 Revision B:1976 | SPATULA, DENTAL, CEMENT |
| MIL-I-7906 Revision A:1961 | INDICATOR, GYRO HORIZON, MANUALLY CAGED, ELECTRIC, TYPE MB 1 |
| MIL-M-14274 Revision A:1975 | MULTIPLIER, ELECTRICAL INSTRUMENT TS-265/UP |
| MIL-T-5955 Revision C:1970 | TRANSMISSION SYSTEM, VTOL-STOL GENERAL REQUIREMENTS FOR |
| MIL C 25531 : D | COUPLING HALF, QUICK DISCONNECT, PNEUMATIC STARTER, EXTERNAL, LOW PRESSURE, DIRECT RELEASE |
| MIL-R-24169 Revision B:1982 | REGULATOR, AIR DEMAND, SINGLE HOSE, DIVER 5 |
| MIL-C-50709 Base Document:1971 | COPPER BASE SINTERED BARS (OIL PREGNATED) |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| MIL E 24127 : 0 | EDUCTORS; GASOLINE, OIL, OR WATER |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL-M-81385 Revision A:1967 | MANIFOLD STEM ASSEMBLIES, LIFE PRESERVER |
| MIL-T-43560 Revision A:1972 | TESTER, SPRING RESILIENCY |
| MIL H 81581/5 : A | HOSE ASSEMBLY, BREATHING OXYGEN, LOW PRESSURE, CONNECTOR TO REGULATOR |
| MIL-T-6302 Revision B:1964 | TRANSMITTER, PRESSURE, FUEL 0-600 PSI |
| MIL-M-45920 Base Document:1971 | MACHINE GUN, AIRCRAFT 7.62MM. M134 (GAU-2B/A) |
| MIL C 25955 : 0 | CONNECTOR, ELECTRICAL, ENVIRONMENT RESISTING MINIATURE, WITH SNAP-IN CONTACTS |
| MIL-B-52371 Revision A:1971 | BINOCULARS, ELECTRONIC AN/PAS-5 |
| GG-L-00410 Base Document:1964 | LINE GUIDE, LETTERING, ADJUSTABLE |
| MIL-V-85603 Base Document:1989 | VOLTMETER, DC, AIRCRAFT, DIGITAL DISPLAY GENERAL SPECIFICATION FOR |
| MIL-M-18808 Base Document:1955 | MICROPHONE MARK 10 MOD 0 |
| MIL-S-48209 Base Document:1972 | SEALED RUBBER ROUND SECTION |
| MIL-T-4638 Revision B:1985 | TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE) |
| MIL-C-21067 Revision C:1992 | COATING COMPOUND, SYNTHETIC RUBBER, FOR EXPOSED STEEL SURFACES |
| MIL-B-25820 Revision B:1967 | BOMB, LOADING PRACTICE BDU-6/E AND BDU-35/E |
| MIL I 83361 : (4) | INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI |
| MIL F 18953 : B | FAN, VANEAXIAL AND TUBEAXIAL, FIXED AND PORTABLE, VENTILATION, NAVAL SHIPBOARD |
| MIL-S-3629 Revision F:1981 | STEREOSCOPES, LENS, AERIAL PHOTOGRAPH INTERPRETATION [POCKET] |
| KKK-T-728 Revision A:1973 | TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY |
| MIL E 25670 : A NOTICE 1 | GENERAL SPECIFICATION FOR EARPHONE ELEMENTS |
| MIL B 1163 : A | BARS, FLINDERS |
| MIL-F-14136 Revision B:1959 | FILTER, BANDPASS (FILTER KITS MK&123) (TRC, MK&124) (/TRC, MK&228) (GRC AND MK&236)/GRC UNITS OF |
| MIL-G-5485 Revision D:1993 | GLASS; LAMINATED, FLAT, BULLET RESISTANT |
| MIL-S-1186 Revision B:1961 | SALINOMETER EQUIPMENT, EVAPORATOR, SHIPBOARD USE |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| MIL-F-3315 Revision B:1970 | FERRY CONVERSION SET, RAFT, PACKAGING OF |
| MIL-B-82117 Revision D:1983 | BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION |
| MIL C 50863 : C | CARTRIDGE 40MM HEDP M430 LOADING ASSEMBLING AND PACKING |
| GG S 776 : C | STRAIGHTEDGE, STEEL, DRAFTSMEN |
| GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) |
| MIL-C-7942 Revision B:1966 | CONNECTORS, HOSE, QUICK-DISCONNECT, ANTI "G" SUIT |
| MIL-P-38136 Revision A:1969 | PITOT STATIC TUBE COMPENSATED TRU 62/A |
| MIL-M-50768 Revision A:1972 | MOVEMENT, D A M ASSEMBLY |
| MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
| GG-E-651 Revision C:1975 | ERASER, BLACKBOARD |
| KKK-A-2809 Base Document:1986 | AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL M 5388 : B | MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B |
| MIL-T-16315 Revision D:1994 | TRANSFORMER, POWER, STEP DOWN (MISCELLANEOUS, NAVAL SHIPBOARD USE) (NAVY) |
| MIL-A-82516 Base Document:1967 | |
| MIL-L-5567 Revision F:1983 | LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE |
| GGG-M-125-10 Revision A:1982 | RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT |
| MIL P 23653 : C | PLASTIC TILES, VIBRATION DAMPING |
| MIL-T-49305 Base Document:1989 | TEST SET, COUNTERMEASURE SET TS-3609 ()/ALQ-156(V) |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION |
| MIL G 18498 : C | GLASS SET, WATER GAGE, FLAT, PLAIN. HIGH PRESSURE STEAM (GLASS, MICA SHIELD, SPACERS, & GASKETS) |
| FF-T-791 Revision B:1967 | TURNBUCKLE |
| GGG-M-125-8 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS AND MISTS) |
| MIL-A-45597 Revision A:1984 | ANALYZER, ENGINE, ELECTRONIC, CONSOLE-TYPE |
| GGG-D-777 Revision B:1966 | DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL |
| MIL F 45144 : D | FUSE, BLASTING, TIME, M700, & FUSE, BLASTING, TIME, INERT, LOADING, ASSEMBLING AND PACKING |
| MIL H 19253 : C NOTICE 1 | HOOD, HOIST |
| MIL-T-45555 Base Document:1964 | TRAINERS, TANK TURRET: GUNNERY, M26 (M48A2) AND M30A1 (M60A1); PROCESSING FOR STORAGE AND SHIPMENT OF |
| RR-P-586 Revision A:1958 | POT, MELTING, (NONELECTRIC, SOLDER STYLE) |
| MIL-R-11050 Revision B:1969 | RECTIFIER, METALLIC, SELENIUM |
| MIL-A-52839 Base Document:1975 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: MINISID 3, AN/GSQ-154 |
| MIL-C-21583 Base Document:1958 | CS MECHANISM MARK 1 MODS 3, 4, 9 AND 11 |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-G-8170 Revision D:1987 | GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A |
| MIL-I-60008 Revision B:1991 | IGNITER, INTEGRAL M56 |
| MIL-C-19087 Revision A:1970 | CONTACTOR (FOR TORPEDO MARK 37 MODS 0, 2 AND 3) |
| MIL-B-22353 Revision D:1988 | BATCHING PLANT, AGGREGATE, (WHEEL-MOUNTED, 3O-TON CAPACITY) |
| MIL F 38635 : D | FIN ASSEMBLY, BOMB, MAU-91A/B AND MAU-91B/B |
| MIL-A-49277 Base Document:1985 | AMPLIFIER, AUDIO FREQUENCY AM-1780A/VRC |
| MIL P 4879 : B NOTICE 1 | POWER SUPPLY METALLIC RECTIFIER 6-12 VOLT 500-250 AMPERE OUTPUT TYPE K AND 1 |
| MIL-STD-834 Revision C:1974 | PACKAGING DATA FORMS, INSTRUCTIONS FOR PREPARATION AND USE OF |
| MIL-G-52524 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-617/M' |
| MIL-A-85434 Revision A:1983 | AMPLIFIER, TRAVELING WAVE TUBE AM-6937/DLQ-3B |
| MIL P 83825 : 0 | PANEL ASSY, AUTOMATIC POWER TRANSFER FOR MB-TEEN AND EMU SERIES DIESEL ENGINE GENERATOR SETS |
| MIL-O-81144 Revision B:1970 | OSCILLATOR SUBASSEMBLY (NOSC DWG NO. 1563731)(TORPEDO MARK 37 MODS O AND 1) |
| MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED |
| MIL-C-7079 Revision A:1965 | CIRCUIT BREAKERS, NON TRIP-FREE GENERAL SPECIFICATION FOR |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL S 20633 : C | SIGNS AND MARKER, ALUMINUM: MINED AREA MARKING |
| MIL-I-24063 Revision B:1982 | Insert Sets, Sound Isolation for Risic RISIC-1 Flexible Connectors |
| MIL-P-52894 Revision B:1985 | POWER PLANT, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, AN/MJQ-16 |
| MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
| MIL-P-710 Revision F:1990 | PUMP, DEEP WELL, PACKAGING OF |
| MIL-G-52856 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 50/60 HERTZ, PU-405 A/M |
| MIL-L-11931 Revision C:1983 | LENS, CAMERA, COPYING LE 5() |
| MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
| KKK-T-1725 Base Document:1972 | TRUCK, HAND, BOX AND TUB TYPE |
| MIL-F-13424 Revision K:1976 | FUSE, HAND GRENADE, M204A2, M206A2 AND PRACTICE M205A2 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-B-82623 Base Document:1973 | BATTERY, STORAGE, NICKEL CADMIUM (FOR TALOS MISSILE) |
| MIL-G-16748 Revision A:1953 | GAGE, TANK LIQUID LEVEL (STATIC-HEAD) |
| MIL-P-29609 Base Document:1995 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
| ZZ-H-428 Revision D:1974 | HOSE, NON METALLIC AND HOSE, PREFORMED, FOR THE COOLANT SYSTEMS OF AUTOMOTIVE AND OTHER LIQUID COOLED ENGINE |
| MIL-C-53071 Base Document:1987 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE |
| MIL-S-7886 Revision B:1962 | SPARK PLUG, SHIELDED, AIRCRAFT RECIPROCATING ENGINE, GENERAL SPECIFICATION FOR |
| MIL-A-27391 Revision B:1963 | ALTIMETER, PRESSURE AAU-2A |
| MIL-C-12813 Revision B:1993 | CRYSTAL UNITS, QUARTZ, WIRE-MOUNTED, METAL PLATED |
| MIL-C-50850 Revision B:1984 | CHARGE, DEMOLITION M118 PARTS FOR LOADING ASSEMBLING AND PACKING |
| A-A-50720 Base Document:1988 | VACUUM GAGE, PORTABLE |
| MIL-STD-1905 Revision A:1992 | DESIGN AND TEST REQUIREMENTS FOR LEVEL B AND LEVEL C AMMUNITION PACKAGING |
| MIL-E-82578 Base Document:1973 | ENCODER, SHAFT ANGLE POSITION, CYCLIC DECIMAL CODED (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL-C-10147 Revision D:1984 | CABINET, PHOTOGRAPHIC STORAGE, FILM BM-11( ) |
| MIL-C-12910 Revision F:1984 | CARTRIDGE, PHOTOFLASH, M112A1 PARTS FOR AND LOADING, ASSEMBLING ANDPACKING |
| MIL-R-55216 Base Document:1962 | RADIOSONDE TEST SET TS-1348 ( ) GMM-1 |
| GG-S-001634 Base Document:1970 | SCALERS, DENTAL, SINGLE-ENDED |
| MIL-C-58104 Revision A:1983 | COVER, PROTECTIVE FOR PARTS AND EQUIPMENT |
| MIL-P-46439 Revision C:1976 | PRIMER, ELECTRIC, M86 LOADING, ASSEMBLING AND PACKING |
| MIL-F-50055 Base Document:1959 | FILTER UNIT, GAS AND PARTICULATE, EMD, 600 CFM, M9 |
| MIL-C-81452 Revision B:1972 | CABLE ASSEMBLY W-1 OF AN/AQS-13 |
| SAE AS 6852 : 1997 | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| NAS1599:1980 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE CIRCULAR, ENVIRONMENT RESISTING, 200 DEG. C. MAXIMUM TEMPERATURE |
| SAE AMS S 22141 : 1998 | STEEL, INVESTMENT CASTINGS - ALLOY AND CARBON |
| PPP-C-1752 Revision D:1989 | CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM |
| MIL C 81309 : E | CORROSION PREVENTIVE COMPOUND, WATER DISPLACING ULTRA-THIN FILM |
| MIL C 16173 : E | CORROSION PREVENTIVE COMPOUND, SOLVENT CUTBACK, COLD APPLICATION |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| O-T-236 Revision C:1979 | TETRACHLOROETHYLENE (PERCHLOROETHYLENE), TECHNICAL GRADE |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL L 3150 : C | LUBRICATING OIL, PRESERVATIVE MEDIUM |
| MIL-G-5634 Revision C:1970 | GRAIN, ABRASIVE, SOFT FOR CARBON REMOVAL |
| MIL-STD-1186 Revision A:1981 | CUSHIONING, ANCHORING, BRACING, BLOCKING, AND WATERPROOFING, WITH APPROPRIATE TEST METHODS |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| MIL-I-23310 Revision B:1984 | INHIBITORS, CORROSION, VOLATILE, OIL TYPE |
| MIL P 3420 : F | PACKAGING MATERIALS, VOLATILE CORROSION INHIBITOR, TREATED, OPAQUE |
| MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| MIL-L-45973 Revision A:1976 | LINER MATERIAL, GREASEPROOF |
| MIL-STD-1235 Revision C:1988 | SINGLE AND MULTILEVEL CONTINUOUS SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES FUNCTIONAL CURVES OF THE CONTINUOUS SAMPLING PLANS |
| PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
| MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| DOD STD 1686 : 0 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)(METRIC) |
| MIL-C-6529 Revision C:1958 | CORROSION PREVENTIVE, AIRCRAFT ENGINE |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL-C-10382 Revision D:1983 | CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT |
| PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
| MIL B 121 : F | BARRIER MATERIAL, GREASEPROOFED, WATERPROOFED, FLEXIBLE |
| PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
| MIL P 81997 : B | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT |
| DOD HDBK 263 : LATEST | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)METRIC |
| MIL L 6081 : C | LUBRICATING OIL, JET ENGINE |
| MIL-G-12803 Revision C:1989 | GASKET MATERIAL, NON-METALLIC |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| ASTM D 4376 : 2015 : REDLINE | Standard Specification for Vapor-Degreasing Grade Perchloroethylene |
| MIL-STD-794 Revision E:1982 | PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF |
| MIL G 10924 : F | GREASE, AUTOMOTIVE AND ARTILLERY |
| FED-STD-101 Revision C:1980 | TEST PROCEDURES FOR PACKAGING MATERIALS |
| P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
| MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| P-C-535 Revision B:1978 | CLEANING COMPOUND, PLATERS ELECTROCLEANING, FOR STEEL |
| QQ-A-1876 Base Document:1974 | ALUMINUM FOIL |
| MIL-C-11796 Revision C:1986 | CORROSION PREVENTIVE COMPOUND, PETROLATUM, HOT APPLICATION |
| MIL E 6060 : D | ENVELOPE, PACKAGING WATER VAPOR PROOF, FLEXIBLE |
| P-C-436 Revision E:1986 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
| PPP-C-1842 Revision B:1992 | CUSHIONING MATERIAL, PLASTIC, OPEN CELL (FOR PACKAGING APPLICATIONS) |
| MIL G 81322 : E | GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395 |
| P-C-437 Revision B:1978 | CLEANING COMPOUND, HIGH PRESSURE (STEAM) CLEANER |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| MIL-C-15074 Revision E:1991 | CORROSION PREVENTIVE, FINGERPRINT REMOVER |
| MIL L 21260 : D | LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
| VV-L-800 Revision C:1983 | LUBRICATING OIL, GENERAL PURPOSE, PRESERVATIVE, (WATER-DISPLACING, LOW TEMPERATURE) |
| PPP-B-640 Revision D:1966 | BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.