Test Terminus, Fiber Optic, Keyed, Removable, use in Optical Loss and Optical Continuity Testing, Rear Insert/Rear Release Through a Test Terminus Adapter, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors)

Amended by

MIL-PRF-29504-21 Notice 1 - Validation:2018

Available format(s)

PDF

Language(s)

English

Published date

03-02-2014

Publisher

US Military Specs/Standards/Handbooks

The Measurement Quality Jumper (MQJ) is a fiber optic test jumper or cable that conforms to the low loss optical requirements. The MQJ is used with test equipment including the performance of optical loss measurements using an optical source and power meter and including Optical Time Domain Reflectometer (OTDR) measurements. The MQJ consists of a single fiber cable with a connector at one end which mates to the test equipment (such as an optical source and power meter) and a connector (test terminus) at the other end which mates to the link/segment under test. For mating to a link/segment with a MIL-PRF-64266 multiple termini connector, a test terminus adapter is used to interface with the multiple termini connector plug or the connector receptacle under test. The test terminus adapter contains the insert cavity configuration to mate with and lock a test terminus in place. This specification sheet specifies the test terminus. The test terminus adapter is specified under MIL-PRF-64266/32 and MIL-PRF-64266/33.

DocumentType	Standard
Pages	13
ProductNote	NEW CHILD NOT 1 2018 IS NOW ADDED
PublisherName	US Military Specs/Standards/Handbooks
Status	NA

MIL-PRF-64266-32 Base Document:2014	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, PLUG STYLE, FOR USE WITH A CONNECTOR RECEPTACLE
MIL-STD-1678-6 Revision A:2016	FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS)
MIL-PRF-64266-33 Base Document:2014	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, RECEPTACLE STYLE, FOR USE WITH A CONNECTOR PLUG

TIA/EIA 455-16 : A1991(R2014)	SALT SPRAY (CORROSION) TEST FOR FIBER OPTIC COMPONENTS - FOTP-16
MIL-PRF-64266-33 Base Document:2014	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, RECEPTACLE STYLE, FOR USE WITH A CONNECTOR PLUG
MIL-PRF-29504-18 Base Document:2008	Termini, Fiber Optic, Non-Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors)
MIL-PRF-64266-32 Base Document:2014	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, TEST TERMINUS ADAPTER, PLUG STYLE, FOR USE WITH A CONNECTOR RECEPTACLE
MIL-PRF-29504 Revision B:2002	TERMINI, FIBER OPTIC CONNECTOR, REMOVABLE, GENERAL SPECIFICATION FOR
MIL-STD-2042-6 Revision C:2016	FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS)
MIL-PRF-29504-20 Base Document:2008	Termini, Fiber Optic, Keyed, Connector, Removable, Environment Resisting, Pin Terminus, Rear Insert/Rear Release, 1.25 MM Ceramic Ferrule, (for MIL-PRF-64266 Connectors)
SAE AIR 1351 : 2014	MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES
MIL-PRF-24792 Revision A:1999	ADHESIVE, EPOXY, TWO PART, FIBER OPTICS
MIL-PRF-64266-9 Revision A:2014	CONNECTORS, FIBER OPTIC, CIRCULAR, ALIGNMENT SLEEVE RETAINER (ASR), MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, ENVIRONMENT RESISTING
MIL-STD-1678-4 Revision C:2016	FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 4: TEST SAMPLE CONFIGURATION AND FABRICATION REQUIREMENTS (PART 4 OF 6 PARTS)
MIL-PRF-64266-20 Base Document:2013	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, SCREW THREADS, BACKSHELL, SPLIT, SINGLE FIBER CABLES, BANDING ADAPTER/CABLE STRAIN RELIEF INTERFACE, ENVIRONMENT RESISTING
MIL S 901 : D	SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR
MIL-PRF-64266-18 Revision A:2013	CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, SCREW THREADS, BACKSHELL, SPLIT, MULTIPLE FIBER CABLES, STRENGTH MEMBER CAPTURE AND BEND LIMITING INTERFACE, ENVIRONMENT RESISTING
MIL-PRF-64266 Revision B:2016	CONNECTORS, FIBER OPTIC, CIRCULAR AND RECTANGULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE GENDERLESS TERMINI, ENVIRONMENT RESISTING GENERAL SPECIFICATION FOR
MIL-STD-1678-2 Revision A:2013	FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS)
MIL-PRF-85045-16 Revision C:2014	CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER, CABLE CLASS SM AND MM