• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

MIL-PRF-55514 Revision G:2013

Current
Current

The latest, up-to-date edition.

Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for
Available format(s)

PDF

Published date

06-09-2013

1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - QUALIFICATION-SUBMITTAL PLANS

Specifies the general requirements for established reliability (ER) and non-established reliability (non-ER), (product level C), plastic (or metallized plastic) dielectric, fixed capacitors, enclosed in nonmetal cases intended primarily, in view of the limited long term moisture resistant characteristics, for use in potted or encapsulated systems, in blocking, filter, and by-pass applications.

This specification covers the general requirements for established reliability (ER) and non-established reliability (non-ER), (product level C), plastic (or metallized plastic) dielectric, fixed capacitors, enclosed in nonmetal cases intended primarily, in view of the limited long term moisture resistant characteristics, for use in potted or encapsulated systems, in blocking, filter, and by-pass applications (see 6.4). ER capacitors covered by this specification have failure rate levels (M, P, R, and S) ranging from 1.0 percent to 0.001 percent per 1,000 hours. These failure rates (FR) are established at a 90-percent confidence level and maintained at a 10-percent producer’s risk and based on life tests performed at +85°C or +105°C, whichever is applicable. An acceleration factor of 5:1 has been used to relate life test data obtained at 125 percent, or 140 percent of rated voltage at +85°C or +105°C, whichever is applicable, to rated voltage at +85°C or +105°C, whichever is applicable. The product levels are based on catastrophic failures and failures occurring outside the degradation limits.

DevelopmentNote
Supersedes MIL C 55514 (C). (04/2002)
DocumentType
Standard
Pages
57
PublisherName
US Military Specs/Standards/Handbooks
Status
Current
Supersedes

DSCC 89062 : C CAPACITOR, FIXED, METALLIZED POLYCARBONATE OR METALLIZED POLYPHENYLENE SULFIDE, NON HERMETICALLY SEALED
DSCC 09007 : 0 CAPACITORS, FIXED, METALLIZED PLASTIC DIELECTRIC, DC, IN NONMETAL CASES
MIL-PRF-55514-7 Revision C:2013 CAPACITORS, FIXED, METALIZED PLASTIC DIELECTRIC, DC-AC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR09
DSCC 89115 : E CAPACITORS, FIXED, SURFACE MOUNT, METALLIZED POLYESTER FILM, NONHERMETICALLY SEALED
MIL-PRF-55514-10 Revision E:2013 CAPACITORS, FIXED, PLASTIC DIELECTRIC, DC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR15
MIL-PRF-55514-9 Revision C:2013 CAPACITORS, FIXED, METALLIZED PLASTIC DIELECTRIC, DC, IN NONMETAL CASES, ESTABLISHED RELIABILITY, STYLE CFR13 AND CFR14
MIL-HDBK-198 Revision B:2012 CAPACITORS, SELECTION AND USE OF
MIL-PRF-55514-13 Revision A:2013 Capacitor, Fixed, Metalized Plastic Dielectric, DC-AC, in Nonmetal Cases, Established Reliability, Style CFR30

MIL-STD-202-211 Base Document:2015 METHOD 211, TERMINAL STRENGTH
MIL-STD-202-302 Base Document:2015 METHOD 302, INSULATION RESISTANCE
MIL-STD-810 Revision G:2008 ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS
MIL-STD-202-210 Base Document:2015 METHOD 210, RESISTANCE TO SOLDERING HEAT
MIL-STD-1276 Revision H:2013 Leads for Electronic Component Parts
MIL-STD-202-305 Base Document:2015 METHOD 305, CAPACITANCE
MIL-STD-202-107 Base Document:2015 METHOD 107, THERMAL SHOCK
MIL-STD-202-106 Base Document:2015 METHOD 106, MOISTURE RESISTANCE
MIL-STD-202-301 Base Document:2015 METHOD 301, DIELECTRIC WITHSTANDING VOLTAGE
MIL-STD-202-215 Base Document:2015 METHOD 215, RESISTANCE TO SOLVENTS
MIL-STD-790 Revision G:2011 ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS
MIL-STD-202-104 Base Document:2015 METHOD 104, IMMERSION
MIL-STD-202-108 Base Document:2015 METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)
MIL-STD-202-105 Base Document:2015 METHOD 105, BAROMETRIC PRESSURE (REDUCED)
MIL-STD-202-208 Base Document:2015 METHOD 208, SOLDERABILITY
MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
MIL-STD-690 Revision D:2005 Failure Rate (FR) Sampling Plans and Procedures
MIL-STD-202-204 Base Document:2015 METHOD 204, VIBRATION, HIGH FREQUENCY
MIL-STD-202-213 Base Document:2015 METHOD 213, SHOCK (SPECIFIED PULSE)

View more information
£16.70
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.