MIL-PRF-6083 Revision G:2013
Current
Current
The latest, up-to-date edition.
HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
Available format(s)
PDF
Language(s)
English
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Defines the characteristics and provides the requirements for one grade of petroleum base hydraulic fluid for use in the -54 degrees C to +135 degrees C temperature range.
| Committee |
FSC 9150
|
| DevelopmentNote |
Supersedes MIL H 6083. (04/2004) G NOTICE 1 - Notice of Validation. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
14
|
| ProductNote |
NEW CHILD NOT 1 2018 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| SAE ARP 5796 : 2013 | FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT |
| SAE AMS 3240 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
| MIL-DTL-9395-31 Revision E:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, 5 AMPERES |
| MIL-DTL-9395-6 Revision C:2006 | SWITCHES, PRESSURE (ABSOLUTE), TYPE 1, SPDT, 3 AMPERES |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| MIL-STD-419 Revision E:2010 | CLEANING, PROTECTING, AND TESTING PIPING, TUBING, AND FITTINGS FOR HYDRAULIC POWER TRANSMISSION EQUIPMENT |
| MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
| MIL-DTL-5523 Revision E:2011 | VALVE; RELIEF, HYDRAULIC PRESSURE |
| MIL-DTL-24694 Revision A:2011 | VALVE, HYDRAULIC RELIEF, 1.5 - 35 BARS (22 - 500 POUNDS PER SQUARE INCH) CARTRIDGE TYPE, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-62366 Revision D:2010 | RING ASSEMBLIES, ELECTRICAL CONTACT |
| MIL-DTL-28827-1 Revision C:2011 | SWITCH, THERMOSTATIC (VOLATILE LIQUID), HERMETIC SEALED, SINGLE POLE DOUBLE THROW (SPDT), MEDIUM RESPONSE TIME |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| SAE AMS P 5510 : 2013 | O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
| MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
| SAE AIR 5358 : 2016 | LANDING GEAR SHOCK STRUT HYDRAULIC FLUID |
| MIL-PRF-62382 Revision C:2011 | VALVE, HYDRAULIC, PRESSURE RELIEF (METRIC) |
| SAE AMS 3241 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65 |
| SAE AIR 786 : 2014 | ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
| MIL-DTL-62420 Revision B:1998 | PERISCOPE, TANK |
| MIL-DTL-9395-40 Revision C:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, LOW LEVEL TO 5 AMPERE |
| MIL-PRF-32058 Revision B:2017 | CHOCK, WHEEL-TRACK - AVIATION, ADJUSTABLE ROPE TYPE |
| BWB TL 8100-0059 : 3ED 2008 | PACKING OF RADIATORS AND RADIATOR COMPONENTS FOR MOTOR VEHICLES - PACKING LEVELS A AND B |
| MIL-DTL-9395-1 Revision D:2006 | SWITCHES, PRESSURE (GAGE), TYPE 2, SPDT, 3 AMPERES |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| MIL PRF 0032287 : 0 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-9395-5 Revision F:2014 | SWITCHES, PRESSURE, (GAGE), TYPE 2, SPST, 5 AMPERES |
| MIL-DTL-9395-27 Revision G:2006 | SWITCHES, PRESSURE, GAUGE (TYPE 2), 3 AMPERES |
| MIL-PRF-62430 Revision B:2010 | HARNESS ASSEMBLY, THERMOCOUPLE |
| SAE AMS R 7362 : 2012 | NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
| MIL-DTL-9395-26 Revision D:2006 | SWITCHES, PRESSURE, ABSOLUTE (TYPE 1), 3 AMPERES |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| MIL-PRF-62365 Revision C:1997 | MOTOR, HYDRAULIC, CONSTANT DISPLACEMENT |
| MIL-DTL-9395-8 Revision E:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, SPDT, 10 AMPERES |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| MIL-PRF-32287 Revision A:2011 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT |
| MIL-DTL-9395-29 Revision C:2006 | SWITCHES, PRESSURE, (DIFFERENTIAL) (TYPE 3), 4 AMPERES |
| SAE AS 4459 : 2013 | FITTINGS, TUBE, FLUID SYSTEM 3000 PSIG (21000 KPA) RATED PRESSURE, EXTERNALLY SWAGED, SPECIFICATION FOR |
| MIL-DTL-45150 Revision M:2012 | Chassis, Trailer, 2-Wheel Cart Type 2-1/2 Ton |
| MIL-DTL-5516 Revision D:2008 | Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
| MIL-DTL-62548 Revision C:2010 | LEAD, IGNITION |
| MIL-DTL-46821 Revision D:1998 | LOADER-TRANSPORTER, GUIDED MISSILE: XM501E3 (IMPROVED HAWK) |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| MIL-DTL-45150 Revision N:2015 | Chassis, Trailer, 2-Wheel Cart Type 2-1/2 Ton |
| SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
| MIL-DTL-5508 Revision C:2007 | FUSES, AIRCRAFT AUTOMATIC QUANTITY-MEASURING, HYDRAULIC |
| MIL-DTL-24630 Revision A:2014 | VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR |
| MIL-DTL-46725 Revision D:1998 | VALVE, FOUR-WAY, HYDRAULIC, MANUAL |
| SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-DTL-62073 Revision H:2011 | Trailer, Flatbed: 4-, 5-, and 7.5-Ton, 4-Wheel (Tandem) Cart Type; Trailer, Bolster: 4-Ton, 4-Wheel (Tandem) (No S/S Document) |
| MIL-DTL-9395-33 Revision C:2006 | SWITCHES, PRESSURE, (DIFFERENTIAL), TYPE 3, 5 AMPERES |
| MIL-DTL-5521 Revision C:2007 | Washer, Aircraft Hydraulic Packing Back-Up |
| SAE J 1776 : 2014 | MARINE VEHICLES - HYDRAULIC SYSTEM PUMPS AND MOTORS - DESIGN AND SPECIFICATION GUIDE |
| MIL-DTL-9395-32 Revision D:2006 | SWITCHES, PRESSURE, DIFFERENTIAL (TYPE 3), 4 AMPERES |
| MIL-DTL-9395-38 Revision C:2006 | SWITCHES, PRESSURE, (GAGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
| SAE AMS 3242 : 2011 | CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
| SAE AIR 4543 : 2017 | AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
| SAE AMS P 5315 : 2013 | ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70 |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ASTM D 4898 : 2016 : REDLINE | Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis |
| MIL-PRF-46170 Revision E:2013 | HYDRAULIC FLUID, RUST INHIBITED, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, NATO CODE NO. H-544 |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| ASTM D 6547 : 2016 : REDLINE | Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| ASTM D 972 : 2016 : REDLINE | Standard Test Method for Evaporation Loss of Lubricating Greases and Oils |
| ASTM D 4289 : 2014-02 | TEST METHOD FOR ELASTOMER COMPATIBILITY OF LUBRICATING GREASES AND FLUIDS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| SAE AMS 3217/2 : 2012 | TEST SLABS, ACRYLONITRILE BUTADIENE (NBR-L), LOW ACRYLONITRILE, 65-75 |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| FED-STD-791 Revision D:2007 | TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.