SEALING AND COATING COMPOUND, CORROSION INHIBITIVE

Amended by

MIL-PRF-81733 Revision D Notice 1 - Validation:2019

Available format(s)

PDF

Language(s)

English

Publisher

US Military Specs/Standards/Handbooks

Covers accelerated, room temperature curing synthetic rubber compounds used in the coating and sealing of metal components on aircraft systems and weapons for the protection of corrosion. The Class 1 sealing compound is effective over a continuous operating temperature range of -65 degrees to +250 degrees F. (-54 to +121 deg C). The Class 2 sealing compound is effective over a continuous operating temperature range of -80 degrees to +320 degrees F. (-62 to +160 deg C).

Committee	FSC 8030
DevelopmentNote	SUPERSEDING MIL-S-81733
DocumentType	Standard
Pages	34
ProductNote	NEW CHILD NOT 1 2019 IS NOW ADDED.
PublisherName	US Military Specs/Standards/Handbooks
Status	Current
Supersedes	MIL S 81733 : C

MIL-PRF-32405 Base Document:2013	CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC
SAE AIR 1594 : 2010	PLAIN BEARING SELECTION FOR LANDING GEAR APPLICATIONS
MIL-DTL-14072 Revision F:2013	FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
MIL-DTL-32525 Base Document:2016	MAGAZINE, PORTABLE (SHIPBOARD)
MIL STD 11991 : A	GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES
SAE AMS 3265 : 2015	SEALING COMPOUND, POLYSULFIDE (T) RUBBER, FUEL RESISTANT, NON-CHROMATED CORROSION INHIBITING, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
MIL-HDBK-510 Revision A:2014	AEROSPACE FUELS CERTIFICATION
SAE J 2270 : 2016	SHIP SYSTEMS AND EQUIPMENT - THREADED FASTENERS - INSPECTION, TEST, AND INSTALLATION GUIDANCE
MIL-STD-186 Revision F:2002	PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS
SAE ARP 1967 : 2014	CONTAINERS, SHIPPING AND STORAGE, REUSABLE
MIL-HDBK-510-1 Revision A:2010	AEROSPACE FUELS CERTIFICATION
MIL-PRF-32295 Revision B:2017	CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE
MIL-PRF-32597 Base Document:2018	CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE
MIL-DTL-18264 Revision E:2015	FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF
MIL-DTL-2 Revision G:2006	VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR
MIL-DTL-27443 Revision F:2003	PALLETS, CARGO, AIRCRAFT, TYPE HCU-6/E AND HCU-12/E
NFPA 1150 : 2017	FOAM CHEMICALS FOR FIRES IN CLASS A FUELS
NASA MSFC HDBK 3697 : 2014	ELECTRICAL BONDING DESIGN GUIDE HANDBOOK
MIL-STD-7179 Revision A:2009	Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment
MIL-STD-171 Revision F:2011	FINISHING OF METAL AND WOOD SURFACES
NASM25027:2012	NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F
MIL-STD-2193 Revision C:2012	Ship Hydraulic System Components
MIL-PRF-87937 Revision D:2001	CLEANING COMPOUND, AEROSPACE EQUIPMENT
SAE AMS 3144 : 2012	PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS
MIL-STD-1568 Revision D:2015	Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
SAE ARP 4118 : 2013	ISOLATION AND CORROSION PROTECTION OF DISSIMILAR MATERIALS, CARBON COMPOSITE STRUCTURE REPAIR

QQ-A-250-12 Revision F:1982	ALUMINUM ALLOY 7075, PLATE AND SHEET
MS24694 Revision C:1969	SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A
MIL-PRF-7808 Revision L:1997	LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
SAE AMS3819C : 2007	CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES
SAE AMS 4376 : 2011(R2018)	PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-H26) COLD ROLLED AND PARTIALLY ANNEALED
MIL F 18264 : D	FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF
MIL-PRF-23377 Revision K:2012	PRIMER COATINGS: EPOXY, HIGH-SOLIDS
MIL S 5002 : D	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
MIL-S-7839 Revision B:1973	SCREW, STRUCTURAL, AIRCRAFT
MIL-T-9046 Revision J:1983	TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE
MIL PRF 5624 : S	TURBINE FUEL, AVIATION, GRADES JP-4, JP-5 AND JP-5/JP-8 ST
A-A-58054 Base Document:1996	ABRASIVE MATS, NON-WOVEN, NON-METALLIC
MIL-PRF-23699 Revision G:2014	Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
CCC-C-419 Revision G:1989	CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED
ASTM D 3182 : 2016 : REDLINE	Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
MIL-C-38736 Revision B Base Document:1984	CLEANING COMPOUND, SOLVENT MIXTURES (METRIC)
MIL C 5541 : E	CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2629 : 2017	FLUID, JET REFERENCE
MIL-PRF-83282 Revision D:1997	HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
NAS679:2010	NUT, SELF-LOCKING, HEXAGON, LOW HEIGHT
QQ-P-416 Revision F:1991	PLATING, CADMIUM (ELECTRODEPOSITED)