MIL-PRF-83726 Revision H:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
17-05-2021
08-06-2017
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - SOLDER DIP AND RETINNING REQUIREMENTS
Sets up the general requirements for time delay relays that are a combination of hybrid microcircuits, solid state electronics with an integral electromagnetic relay, or solid state output.
This specification establishes the general requirements for time delay relays that are a combination of hybrid microcircuits, solid state electronics with an integral electromagnetic relay, or solid state output. Relays covered by this specification are intended for use in aerospace and associated ground support electrical and electronic systems and equipment (see 6.1). For additional application and caution information see 6.1.
| DevelopmentNote |
Supersedes MIL R 83726 (07/1999)
|
| DocumentType |
Standard
|
| Pages |
45
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-R-83726-24 Revision M:2016 | RELAYS, SOLID STATE, TIME DELAY (ON OPERATE), TRACK MOUNTED, TYPE 1, CLASS C, SPST, 150 MILLIAMPERES, FIXED TIME, 50 MILLISECONDS TO 500 SECONDS |
| MIL-R-83726-22 Revision F:2008 | Relays, Solid State, Repeat Cycle Timer, Type IV, Class C, SPST, 250 Milliamperes (No S/S Document) |
| MIL-PRF-83726-13 Revision L:2016 | RELAYS, SOLID STATE, TIME DELAY, (ON OPERATE), TYPE 1 CLASS C, SPST-NO, 300 MILLIAMPERES, FIXED TIME, 0.05 TO 600 SECONDS, HERMETICALLY SEALED |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-PRF-83726-35 Revision D:2013 | RELAYS, HYBRID, TIME DELAY (ON OPERATE), CLASS B, TYPE 1, HERMETICALLY SEALED, 4DPT, 10 AMPERES, FIXED TIME DELAY, 0.1 TO 600 SECONDS |
| MIL-R-83726-14 Revision E:2016 | RELAYS, HYBRID, TIME DELAY, (ON OPERATE), TYPE 1, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED, FIXED TIME, 0.100 TO 300 SECONDS |
| MIL-PRF-83726-31 Revision K:2018 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS |
| MIL-PRF-83726-29 Revision J:2013 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, DPDT, 10 AMPERES, FIXED TIME, 0.1 TO 500 SECONDS |
| MIL-R-83726-12 Revision F:2016 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TYPE 2A, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED, FIXED TIME, 0.100 TO 300 SECONDS |
| MIL-PRF-83726-28 Revision K:2013 | Relays, Hybrid, Time Delay (on Operate), Class B, Type I, Hermetically Sealed, DPDT, 10 Amperes, Fixed Time, 0.1 to 500 Seconds |
| MIL-R-83726-23 Revision E:2015 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TYPE 2B, CLASS B, 10 AMPERES, 4PDT, HERMETICALLY SEALED |
| MIL R 83726/13 : K | RELAYS, SOLID STATE, TIME DELAY, (ON OPERATE), TYPE 1 CLASS C, SPST-NO, 300 MILLIAMPERES, FIXED TIME, 0.05 TO 600 SECONDS, HERMETICALLY SEALED |
| MIL-R-83726-19 Revision H:2016 | RELAYS, HYBRID, TIME DELAY (ON OPERATE), TRACK MOUNTED, TYPE 1, CLASS B, 10 AMPERES, 2PDT, HERMETICALLY SEALED, FIXED TIME, 0.1 TO 300 SECONDS |
| MIL-PRF-83726-30 Revision K:2018 | RELAY, HYBRID, TIME DELAY (ON OPERATE), CLASS B, TYPE 1, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR), 0.1 TO 500 SECONDS |
| MIL-DTL-12883-52 Revision B:2003 | Sockets and Accessories for Plug-in Electronic Components Socket Assembly for Relays, 2, 3, and 4-Pole, Track Mount (MIL-PRF-6106, MIL-PRF-83536, and MIL-PRF-83726) |
| MIL-PRF-83726-36 Revision D:2013 | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE 2A, HERMETICALLY SEALED, 4PDT, 10 AMPERES, FIXED TIME DELAY, 0.1 TO 600 SECONDS |
| MIL-PRF-83726-21 Revision H:2015 | RELAY, SOLID-STATE, TIME DELAY (ON OPERATE), TYPE 1, CLASS C, SPST, 250 MILLIAMPERES, VARIABLE TIME, 0.05 TO 500 SECONDS |
| MIL-R-83726-18 Revision H:2016 | RELAYS, HYBRID, TIME DELAY (ON RELEASE), TRACK MOUNTED, TYPE 2A, CLASS B, 10 AMPERES, 2PDT, HERMETICALLY SEALED, FIXED TIME, 0.1 TO 300 SECONDS |
| MIL-PRF-83726-20 Revision G:2015 | RELAY, SOLID-STATE, TIME DELAY (ON OPERATE), TYPE 1, CLASS C, SPST, 250 MILLIAMPERES, FIXED TIME, 0.05 TO 500 SECONDS |
| MIL-R-83726-27 Revision M:2016 | Relays, Hybrid, Time Delay, Voltage Sensitive, Delay on Drop-Out, Class A, Type V, Hermetically Sealed (Potted), SPDT, 2 Ampere, Track Mounted (No S/S Document) |
| MIL-DTL-12883-40 Revision F:2003 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, MIL-PRF-83726, AND MS27709) |
| MIL-R-83726-7 Revision G:2015 | RELAYS, HYBRID, TIME DELAY, ON PICKUP, TYPE 1, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.06 TO 300 SECONDS |
| MIL-R-83726-8 Revision F:2015 | RELAYS, HYBRID, TIME DELAY, (ON RELEASE), TYPE 2A, CLASS A, 2 AMPERES, 2PDT, FIXED TIME, 0.100 TO 300 SECONDS |
| MIL-DTL-12883-51 Revision B:2003 | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726) |
| MIL-STD-202-212 Base Document:2015 | METHOD 212, ACCELERATION |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| ASME Y32.2 : LATEST | DRAW AND TERM - GRAPHICS SYMBOLS STANDARDS - FOR ELECTRICAL AND ELECTRONIC DIAGRAMS |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| MIL-STD-704 Revision F:2004 | AIRCRAFT ELECTRIC POWER CHARACTERISTICS |
| MIL-STD-202-302 Base Document:2015 | METHOD 302, INSULATION RESISTANCE |
| MIL-STD-883 Revision K:2016 | TEST METHOD STANDARD - MICROCIRCUITS |
| MIL-STD-202-210 Base Document:2015 | METHOD 210, RESISTANCE TO SOLDERING HEAT |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-305 Base Document:2015 | METHOD 305, CAPACITANCE |
| MIL-PRF-38534 Revision J:2015 | HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR |
| MIL-STD-202-101 Base Document:2015 | METHOD 101, SALT ATMOSPHERE (CORROSION) |
| MIL-STD-202-311 Base Document:2015 | METHOD 311, LIFE, LOW LEVEL SWITCHING |
| MIL-PRF-15160-2 Revision J:2014 | Fuses, Instrument, Power, and Telephone (Nonindicating), Style F02 |
| MIL-STD-202-107 Base Document:2015 | METHOD 107, THERMAL SHOCK |
| MIL-STD-202-301 Base Document:2015 | METHOD 301, DIELECTRIC WITHSTANDING VOLTAGE |
| MIL-STD-202-215 Base Document:2015 | METHOD 215, RESISTANCE TO SOLVENTS |
| MIL-STD-790 Revision G:2011 | ESTABLISHED RELIABILITY AND HIGH RELIABILITY QUALIFIED PRODUCTS LIST (QPL) SYSTEMS FOR ELECTRICAL, ELECTRONIC, AND FIBER OPTIC PARTS SPECIFICATIONS |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| MIL-PRF-15160-3 Revision J:2014 | FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F03 |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| MIL-STD-202-105 Base Document:2015 | METHOD 105, BAROMETRIC PRESSURE (REDUCED) |
| MIL-STD-202-208 Base Document:2015 | METHOD 208, SOLDERABILITY |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| EIA 557 : 2006 | STATISTICAL PROCESS CONTROL SYSTEMS |
| MIL-STD-202-214 Base Document:2015 | METHOD 214, RANDOM VIBRATION |
| MIL-STD-202-204 Base Document:2015 | METHOD 204, VIBRATION, HIGH FREQUENCY |
| MIL-STD-202-112 Base Document:2015 | METHOD 112, SEAL |
| MIL-STD-202-213 Base Document:2015 | METHOD 213, SHOCK (SPECIFIED PULSE) |
| MIL-STD-202-307 Base Document:2015 | METHOD 307, CONTACT RESISTANCE |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.