|
SAE AMS QQ A 250/8 : 2014
|
ALUMINUM ALLOY 5052, PLATE AND SHEET |
|
MIL-M-24041 Revision C:1981
|
MOLDING AND POTTING COMPOUND |
|
MMM-A-121 Base Document:1966
|
ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL |
|
MIL C 53072 : B
|
CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
|
ASTM B 85 : 2003
|
Standard Specification for Aluminum-Alloy Die Castings |
|
SAE AMS QQ A 225/9 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
|
ASTM B 80 : 2015 : REDLINE
|
Standard Specification for Magnesium-Alloy Sand Castings |
|
A-A-53884 Revision A:1992
|
GOLD ALLOY, CASTING, DENTAL |
|
SAE AMS QQ A 250/12 : 2013
|
ALUMINUM ALLOY 7075, PLATE AND SHEET |
|
TT-W-572 Revision B:1969
|
WOOD PRESERVATIVE: WATER-REPELLANT |
|
SAE AMS 2422 : 2014
|
PLATING, GOLD |
|
MIL P 53022 : B
|
PRIMER, EPOXY COATING, CORROSION INHIBITING, LEAD & CHROMATE FREE |
|
MIL-PRF-8116D:2014
|
PUTTY, GENERAL PURPOSE, NON-HARDENING |
|
DOD-P-15328 Revision D:1978
|
PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
|
ASTM D 3955 : 2013 : REDLINE
|
Standard Specification for Electrical Insulating Varnishes |
|
ASTM D 295 : 2012
|
Standard Test Methods for Varnished Cotton Fabrics Used for Electrical Insulation (Withdrawn 2020) |
|
MIL-A-46146 Revision B:1990
|
ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
|
ASTM B 19 : 2015 : REDLINE
|
Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
|
MIL-PRF-24635 Revision E:2009
|
COATING SYSTEMS, WEATHER-RESISTANT, EXTERIOR USE |
|
SAE AMS 5569B : 2011
|
STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS AND WELDED HYDRAULIC TUBING, 19CR - 9.5NI - 0.03C MAX, COLD DRAWN, 1/8 HARD TEMPER |
|
QQ-N-286 Revision G:2000
|
NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
|
SAE AMS QQ A 200/3 : 1997
|
ALUMINUM ALLOY 2024, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
SAE AMS QQ C 320 : 2000
|
CHROMIUM PLATING (ELECTRODEPOSITED) |
|
A-A-1452 Revision C:2007
|
LACQUER (SPRAYING, CHEMICAL RESISTANT) |
|
ASTM B 91 : 2017 : REDLINE
|
Standard Specification for Magnesium-Alloy Forgings |
|
MIL-PRF-81733 Revision D:1998
|
SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
|
NFPA 34 : 2015
|
DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
|
ASTM B 339 : 2012 : REDLINE
|
Standard Specification for Pig Tin |
|
TT-P-1757 Revision B:1997
|
PRIMER COATING, ALKYD BASE, ONE COMPONENT |
|
ASTM A 929/A929M : 2017-03
|
SPECIFICATION FOR STEEL SHEET, METALLIC-COATED BY THE HOT-DIP PROCESS FOR CORRUGATED STEEL PIPE |
|
SAE AMS 5365 : 2013
|
CASTINGS, SAND, CORROSION AND HEAT RESISTANT, 24CR - 20.5NI, SOLUTION HEAT TREATED |
|
ASTM A 204/A204M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum |
|
SAE AMS 5366 : 2012
|
STEEL, CORROSION AND HEAT RESISTANT, INVESTMENT CASTING 25CR - 20NI (CK-20) AS-CAST |
|
SAE J 452 : 2003
|
GENERAL INFORMATION - CHEMICAL COMPOSITIONS, MECHANICAL AND PHYSICAL PROPERTIES OF SAE ALUMINUM CASTING ALLOYS |
|
IPC J STD 001 : F
|
REQUIREMENTS FOR SOLDERED ELECTRICAL AND ELECTRONIC ASSEMBLIES |
|
A-A-59146 Revision B:2014
|
CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
|
MIL-P-18317 Base Document:1954
|
PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
|
MIL-DTL-16232 Revision G:2000
|
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
|
MIL-PRF-23586 Revision F:1996
|
SEALING COMPOUND (WITH ACCELERATOR), SILICONE RUBBER, ELECTRICAL |
|
SAE AMS 2770 : 2015
|
HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS |
|
MIL-PRF-3150 Revision E:2008
|
LUBRICATING OIL, PRESERVATIVE, MEDIUM |
|
SAE AMS 4376 : 2011(R2018)
|
PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-H26) COLD ROLLED AND PARTIALLY ANNEALED |
|
SAE AMS 5571J:2012(R2018)
|
STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED |
|
SAE AMS T 8506 : 1999
|
TUBING, STEEL, CORROSION-RESISTANT, (304), ANNEALED, SEAMLESS AND WELDED |
|
ASTM A 666 : 2015 : REDLINE
|
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
|
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
AWS C3.5 : 1999
|
SPECIFICATION FOR INDUCTION BRAZING |
|
SAE AMS QQ A 250/4 : 2015
|
ALUMINUM ALLOY 2024, PLATE AND SHEET |
|
ASTM A 516/A516M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
|
SAE AMS QQ A 250/13 : 1997
|
ALUMINUM ALLOY ALCLAD 7075, PLATE AND SHEET |
|
SAE AMS QQ A 200/8 : 2015
|
ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061 |
|
SAE AMS QQ N 290 : 2015
|
NICKEL PLATING (ELECTRODEPOSITED) |
|
SAE AMS QQ A 225/2 : 1997
|
ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 3003 |
|
ASTM B 545 : 2013 : REDLINE
|
Standard Specification for Electrodeposited Coatings of Tin |
|
SAE AMS QQ A 250/1 : 1997
|
ALUMINUM 1100, PLATE AND SHEET |
|
ASTM A 623 : 2016 : REDLINE
|
Standard Specification for Tin Mill Products, General Requirements |
|
SAE AMS QQ A 225/1 : 1998
|
ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 1100 |
|
ASTM A 693 : 2016 : REDLINE
|
Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip |
|
SAE AMS 5564 : 2013
|
STEEL, CORROSION RESISTANT, TUBING 19CR - 10NI (SAE 30304) HIGH-PRESSURE HYDRAULIC, WELDED PLUS ULTRASONICALLY TESTED OR SEAMLESS COLD DRAWN, ONE EIGHTH - HARD TEMPER |
|
SAE AMS QQ A 225/4 : 2017
|
ALUMINUM ALLOY, 2014, BAR, ROD, WIRE AND SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED |
|
SAE AMS QQ A 250/2 : 1997
|
ALUMINUM ALLOY 3003, PLATE AND SHEET |
|
SAE AMS QQ A 200/2 : 2014
|
ALUMINUM ALLOY 2014, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
MIL-PRF-23377 Revision K:2012
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
|
ASTM B 584 : 2014 : REDLINE
|
Standard Specification for Copper Alloy Sand Castings for General Applications |
|
SAE AMS 2418 : 2017
|
PLATING, COPPER |
|
SAE AMS 5563 : 2012
|
STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED TUBING, 19CR - 9.5NI (SAE 30304), COLD DRAWN, 1/4 HARD TEMPER |
|
SAE AMS QQ A 250/11 : 1997
|
ALUMINUM ALLOY 6061, PLATE AND SHEET |
|
SAE AMS QQ A 250/15 : 2014
|
ALUMINUM ALLOY ALCLAD 7178, PLATE AND SHEET |
|
MIL-C-24723 Base Document:1989
|
CASTINGS, NICKEL-COPPER ALLOY |
|
SAE AMS 2434 : 2011
|
PLATING, TIN-ZINC ALLOY |
|
ASTM B 124 : 2008
|
SPECIFICATION FOR COPPER AND COPPER ALLOY FORGING ROD, BAR AND SHAPES |
|
SAE AMS 4860 : 2015
|
MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS, 58CU - 39ZN - 1.2FE - 1.0AL - 0.80MN, AS CAST |
|
MIL-PRF-680 Revision C:2010
|
DEGREASING SOLVENT |
|
IPC J STD 006 : C
|
REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
|
SAE AMS QQ A 225/3 : 1997
|
ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 2011 |
|
IPC J STD 004 : B
|
REQUIREMENTS FOR SOLDERING FLUXES |
|
MIL P 53030 : A
|
PRIMER COATING, EPOXY, WATER REDUCIBLE, LEAD & CHROMATE FREE |
|
MIL-HDBK-454 Revision B:2007
|
GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
|
NFPA 33 : 2016
|
SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
|
ASTM B 69 : 2016 : REDLINE
|
Standard Specification for Rolled Zinc |
|
MIL C 20218 : P
|
CHROMIUM PLATING, ELECTRODEPOSITED, POROUS |
|
ASTM D 1732 : 2003
|
Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting |
|
QQ-B-654 Revision A:1980
|
BRAZING ALLOY, SILVER |
|
SAE AMS 5566 : 2011
|
STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304) HIGH PRESSURE, COLD DRAWN |
|
MIL-L-23398 Revision D:1985
|
LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
|
SAE AMS A 25463 : 2013
|
ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
|
AWS C3.4 : 1999
|
SPECIFICATION FOR TORCH BRAZING |
|
SAE AMS QQ A 200/11 : 2014
|
ALUMINUM ALLOY 7075, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
MIL-DTL-83488 Revision D:1999
|
COATING, ALUMINUM, HIGH PURITY |
|
SAE AMS 5567 : 2015
|
STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
|
MIL-DTL-14538 Revision D:1999
|
CHROMIUM PLATING, BLACK (ELECTRODEPOSITED) |
|
ASTM A 586 : 2004 : REV A
|
Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand |
|
MIL-C-46168 Revision D:1987
|
COATING, ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
|
MIL-PRF-22750 Revision G:2011
|
COATING, EPOXY, HIGH-SOLIDS |
|
A-A-59298 Revision B:2013
|
Tape, Pressure-Sensitive Adhesive |
|
SAE AMS S 13165 : 2007
|
SHOT PEENING OF METAL PARTS |
|
IPC J STD 005 : A
|
REQUIREMENTS FOR SOLDERING PASTES |
|
SAE AMS C 81562 : 1998
|
COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED) |
|
ASTM B 679 : 1998
|
Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use |
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
MIL-I-17563 Revision C:1992
|
IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
|
QQ-L-171 Revision E:1966
|
LEAD PIG |
|
SAE AMS S 4383 : 2015
|
SEALING COMPOUND, TOPCOAT, FUEL TANK BUNA-N TYPE |
|
MIL-C-8514 Revision C:1967
|
COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
|
SAE AMS 2772 : 2016
|
HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
|
MIL-DTL-64159 Revision B:2011
|
CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
|
SAE AMS 4377 : 2011
|
MAGNESIUM ALLOY, SHEET AND PLATE, 3.0AL - 1.0ZN - 0.20MN (AZ31B-H24), COLD ROLLED, PARTIALLY ANNEALED |
|
MIL-STD-276 Revision A:1992
|
IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
|
A-A-208 Revision C:2012
|
INK, MARKING, STENCIL, OPAQUE, (POROUS AND NON-POROUS SURFACES) |
|
MIL-I-22110 Revision C:1985
|
INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
|
SAE AMS QQ A 250/5 : 2014
|
ALUMINUM ALLOY ALCLAD 2024, PLATE AND SHEET |
|
MIL C 5541 : E
|
CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
|
SAE AMS 5570 : 2013
|
STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED |
|
SAE AMS 4375 : 2011
|
SHEET AND PLATE, MAGNESIUM ALLOY - 3.0AL - 1.0ZN - 0.20MN (AZ31B-0) ANNEALED AND RECRYSTALLIZED |
|
MIL A 8625 : F
|
ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
|
AWS C3.6 : 1999
|
SPECIFICATION FOR FURNACE BRAZING |
|
A-A-56032 Revision D:2003
|
INK, MARKING, EPOXY BASE |
|
MIL T 81772 : B
|
THINNER, AIRCRAFT COATING |
|
ASTM B 30 : 2016 : REDLINE
|
Standard Specification for Copper Alloys in Ingot Form |
|
MIL C 85054 : B
|
CORROSION PREVENTIVE COMPOUND, WATER DISPLACING, CLEAR (AMLGUARD) |
|
QQ-B-639 Revision C:2016
|
BRASS, NAVAL: FLAT PRODUCTS |
|
MIL G 10924 : F
|
GREASE, AUTOMOTIVE AND ARTILLERY |
|
QQ-T-201 Revision F:1986
|
TIN PLATE, FOR ROOFING AND ROOFING PRODUCTS |
|
AWS C3.7 : 1999
|
SPECIFICATION FOR ALUMINUM BRAZING |
|
SAE AMS 4291 : 2017
|
ALUMINUM ALLOY, DIE CASTINGS, 8.5SI - 3.5CU (A380.0-F), AS CAST |
|
ASTM B 199 : 2017 : REDLINE
|
Standard Specification for Magnesium-Alloy Permanent Mold Castings |
|
SAE AMS A 8576 : 2016
|
ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
|
SAE AMS 5639 : 2017
|
STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
|
NFPA 30 : 2018
|
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
|
SAE AMS 4842 : 2012
|
CASTINGS, LEADED BRONZE, SAND AND CENTRIFUGAL 80CU - 10SN - 9.5PB AS CAST |
|
CCC-D-950 Revision F:1989
|
DYEING AND AFTER TREATING PROCESSES FOR COTTON CLOTHS |
|
ASTM B 107/B107M : 2013 : REDLINE
|
Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire |
|
SAE AMS 4290 : 2017
|
ALUMINUM ALLOY, DIE CASTINGS 9.5SI - 0.50MG (360.0-F), AS CAST |
|
SAE AMS QQ A 225/8 : 1998
|
ALUMINUM ALLOY 6061, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
|
MIL-HDBK-1587 Base Document:1996
|
MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEM |
|
SAE AMS P 81728 : 2015
|
PLATING, TIN-LEAD (ELECTRODEPOSITED) |
|
MIL C 26074 : E
|
COATINGS, ELECTROLESS NICKEL, REQUIREMENTS FOR |
|
SAE AMS C 8837 : 2015
|
COATING, CADMIUM (VACUUM DEPOSITED) |
|
SAE AMS QQ A 200/1 : 1997
|
ALUMINUM ALLOY 3003, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
|
SAE AMS QQ A 200 : 2004
|
ALUMINUM ALLOY, BAR, ROD, SHAPES, STRUCTURAL SHAPES, TUBE, AND WIRE, EXTRUDED: GENERAL SPECIFICATION FOR |
|
A-A-52408 Base Document:1993
|
Preservative Coating, Rubber: for Rubber Surfaces |
|
MIL-HDBK-691 Revision B:1987
|
Adhesive Bonding |
|
MIL-PRF-16173 Revision E:1993
|
CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
|
ASTM A 515/A515M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
|
SAE AMS QQ A 225/6 : 1998
|
ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
|
MIL-I-16923 Revision H:1991
|
INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY |
|
MIL A-A-59282 : 1998
|
CHEMICALS, ANALYTICAL; GENERAL SPECIFICATION FOR |
|
A-A-59166 Revision A:2014
|
COATING COMPOUND, NONSLIP (FOR WALKWAYS) |
|
ASTM B 661 : 2012 : REDLINE
|
Standard Practice for Heat Treatment of Magnesium Alloys |
|
SAE AMS QQ A 225/5 : 1997
|
ALUMINUM ALLOY, 2017, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED |
|
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
MIL-HDBK-1250 Revision A:1995
|
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
|
MIL C 53039 : A
|
COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
|
FED-STD-141 Revision D:2001
|
PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
|
MIL B 15382 : C
|
BOLT, FIREBRICK ANCHOR |
|
MIL P 11414 : E
|
PRIMER COATING, LACQUER, RUST INHIBITING |
|
MIL L 46010 : D
|
LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
|
FED-STD-595 Revision C:2008
|
COLORS USED IN GOVERNMENT PROCUREMENT |
|
SAE AMS QQ A 250/3 : 2014
|
ALUMINUM ALLOY ALCLAD 2014, PLATE AND SHEET |
|
TT-C-490 Revision F:2013
|
CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
|
SAE AMS QQ A 225/7 : 1997
|
ALUMINUM ALLOY, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED, 5052 |
|
SAE AMS M 3171 : 1998
|
MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON |
|
A-A-53475 Base Document:1988
|
PLATINUM FOIL (1 PENNYWEIGHT) |
|
SAE AMS 5565L : 2013
|
STEEL, CORROSION RESISTANT, WELDED TUBING, 19CR - 9.5NI (304), SOLUTION HEAT TREATED |
|
QQ-C-40 Base Document:1963
|
CALKING, LEAD WOOL AND LEAD PIG |
|
ASTM A 302/A302M : 2017 : REDLINE
|
Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel |
|
ASTM B 122/B122M : 2016 : REDLINE
|
Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
|
SAE AMS 5560 : 2016
|
STEEL, CORROSION RESISTANT, SEAMLESS TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED |
|
MIL-I-8574 Revision E:1982
|
INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |