MIL-STD-2193 Revision C:2012
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Ship Hydraulic System Components
Amended by
Available format(s)
PDF
Superseded date
11-05-2021
Language(s)
English
Published date
30-11-2012
Publisher
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Specifies design, construction, and testing requirements that are common to most components used in ship hydraulic (power transmission and control) systems.
This standard provides design, construction, and testing requirements that are common to most components used in ship hydraulic (power transmission and control) systems. This standard does not establish configuration requirements, pressure, flow, or performance requirements for any specific component.
| DevelopmentNote |
Supersedes MIL HDBK 2193. (12/2012) NEW CHILD NOT 1 2023 IS ADDED
|
| DocumentType |
Standard
|
| Pages |
25
|
| ProductNote |
NEW CHILD NOT 1 2023 IS ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J 1776 : 2014 | MARINE VEHICLES - HYDRAULIC SYSTEM PUMPS AND MOTORS - DESIGN AND SPECIFICATION GUIDE |
| MIL A 24533 : B | ACTUATORS, ROTARY HYDRAULIC RACK AND PINION |
| MIL-DTL-868 Revision A:2014 | Valves, Hydraulic Directional Control, General Specification for |
| MIL V 0024695 : B | VALVE, HOSE ASSEMBLY, AND ADAPTER, VENT AND TEST HYDRAULIC SERVICE, GENERAL SPECIFICATION FOR (METRIC) |
| MIL-DTL-24402 Revision F:2014 | FILTERS (HYDRAULIC), FILTER ELEMENTS, AND FILTER DIFFERENTIAL PRESSURE INDICATORS, GENERAL SPECIFICATION FOR |
| SAE AS 4716 : 2011 | GLAND DESIGN, O-RING AND OTHER SEALS |
| MIL-DTL-24441-20 Revision B:2009 | PAINT, EPOXY-POLYAMIDE, GREEN PRIMER, FORMULA 150, TYPE 3 |
| MIL-DTL-32258 Base Document:2007 | NUT, SELF-LOCKING (RING TYPE NON-METALLIC INSERT), HEAVY HEX, CONTROLLED ROOT RADIUS, NICKEL-COPPER ALLOY |
| SAE AS 5860 : 2014 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, STATIC GLAND |
| SAE AMS 2404 : 2013 | PLATING, ELECTROLESS NICKEL |
| MIL-PRF-6083 Revision G:2013 | HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION |
| SAE AS 5781 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS |
| MIL-PRF-81733 Revision D:1998 | SEALING AND COATING COMPOUND, CORROSION INHIBITIVE |
| NAS1351:2009 | SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRF-3A |
| SAE J 518 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE |
| SAE J 1926/3 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 3: LIGHT-DUTY (L-SERIES) STUD ENDS |
| MIL-DTL-24441-21 Revision B:2009 | PAINT, EPOXY-POLYAMIDE, HAZE GRAY FORMULA 151, TYPE 3 |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| SAE AS 3581 : 2012 | PACKING, PREFORMED - O-RING SEAL AMS 7259 |
| SAE AS 5169 : 2009 | FITTING, PORT PLUG AND BLEEDER |
| NASM33547:2011 | PINS, SPRING, FUNCTIONAL LIMITATIONS OF |
| SAE J 429 : 2014 | MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
| SAE ARP 1234 : 2012 | GLAND DESIGN, ELASTOMERIC O-RING SEALS, STATIC AXIAL, WITHOUT BACK-UP RINGS |
| SAE AS 5782 : 2015 | RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS |
| MIL-PRF-17331 Revision K:2013 | LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
| SAE AMS QQ N 290 : 2015 | NICKEL PLATING (ELECTRODEPOSITED) |
| ASTM B 545 : 2013 : REDLINE | Standard Specification for Electrodeposited Coatings of Tin |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| MIL-DTL-24695-1 Revision B:2012 | Valve, Vent and Test Hydraulic Service |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| SAE AS 5857 : 2010 | GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |
| NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
| NASM17830:2017 | NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEGREES F AND 450 DEGREES F, NON-METALLIC INSERT, 300 SERIES CRES |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| MIL-DTL-24441 Revision D:2009 | PAINT, EPOXY-POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL-STD-438 Revision E:1973 | SCHEDULE OF PIPING VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR SUBMARINES SERVICE |
| NASM33540:2003 | SAFETY WIRING, SAFETY CABLING, COTTER PINNING, GENERAL PRACTICES FOR |
| SAE J 1926/1 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 1: THREADED PORT WITH O-RING SEAL IN TRUNCATED HOUSING |
| MIL I 45910 : C | INSERT, SCREW THREAD LOCKED IN & RING LOCKED 1 SERRATED GENERAL SPECIFICATION FOR |
| SAE AMS 2460 : 2013 | PLATING, CHROMIUM |
| MIL-STD-740-2 Base Document:1986 | STRUCTURE BORNE VIBRATORY ACCELERATION MEASUREMENTS ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| SAE AS 8791 : 2014 | HYDRAULIC AND PNEUMATIC RETAINERS (BACK-UP RINGS), POLYTETRAFLUOROETHYLENE (PTFE) RESIN |
| NASM8846:2011 | INSERT, SCREW-THREAD, HELICAL COIL |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| NASM20995:2012 | WIRE, SAFETY OR LOCK |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-PRF-17672 Revision E:2010 | Hydraulic Fluid, Petroleum, Inhibited |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| SAE AMS R 83485/1 : 2015 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES, O-RINGS, SIZES AND TOLERANCES |
| SAE AS 1290 : 2011 | GRAPHIC SYMBOLS FOR AIRCRAFT HYDRAULIC AND PNEUMATIC SYSTEMS |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| SAE J 24714 : 2001 | Fluid Systems—Connector Tubes—General Specification and Part Standard |
| SAE AS 3209 : 2013 | PACKING, PREFORMED - AMS 7276, 'O' RING |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| NASM17829:2012 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEGREES F, NON-METALLIC INSERT, NON-CRES STEEL |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| SAE J 1926/2 : 2016 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ASME B1.1 THREADS AND O-RING SEALING - PART 2: HEAVY-DUTY (S SERIES) STUD ENDS |
| MIL I 45932 : 0 | INSERT, SCREW THREAD, THIN WALL, LOCK IN |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| MIL-DTL-24704 Revision B:2011 | Flanges, Four-Bolt, Square, for Hydraulic Systems, General Specification for |
| SAE J 2655 : 2015 | FASTENER PART STANDARD - WASHERS AND LOCKWASHERS (INCH DIMENSIONED) |
| NAS1352:2014 | SCREW, CAP, SOCKET HEAD, UNDRILLED AND DRILLED, PLAIN AND SELF-LOCKING, ALLOY STEEL, CORROSION-RESISTANT STEEL AND HEAT-RESISTANT STEEL, UNRC-3A AND UNRC-2A |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| MS21344 Revision A:2016 | FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR |
| MIL-H-22072 Revision C:1984 | HYDRAULIC FLUID, CATAPULT, NATO CODE NUMBER H-579 |
| MIL-H-19457 Revision D:1989 | HYDRAULIC FLUID, FIRE RESISTANT, NON NEUROTOXIC |
| SAE J 995 : 2012 | MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS |
| SAE AS 5861 : 2015 | RETAINERS, (BACK-UP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, STATIC GLAND |
£16.70
Excluding VAT
GBP
CAD
CHF
CNY
DKK
EUR
GBP
HKD
IDR
INR
JPY
KRW
MXN
NOK
NZD
SEK
SGD
USD
ZAR
PDF - English
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.