MIL-STD-648 Revision E:2016
Current
The latest, up-to-date edition.
English
01-11-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - CONTAINER REQUIREMENTS CHECKLIST
APPENDIX B - DRAWINGS OF COMMON STANDARD PARTS FOR
NAVY CONTAINERS
APPENDIX C - ELECTROSTATIC PROPERTIES OF MATERIALS
APPENDIX D - SUPERIMPOSED-LOAD TEST (STACKABILITY,
WITH DUNNAGE)
APPENDIX E - SUPERIMPOSED-LOAD TEST (UNIFORMLY DISTRIBUTED,
WITHOUT DUNNAGE)
APPENDIX F - VIBRATION (REPETITIVE SHOCK) TEST
APPENDIX G - FREE-FALL DROP TEST
APPENDIX H - CORNERWISE-DROP (ROTATIONAL) TEST
APPENDIX I - EDGEWISE-DROP (ROTATIONAL) TEST
APPENDIX J - TIPOVER TEST
APPENDIX K - ROLLOVER TEST
APPENDIX L - INCLINE-IMPACT TEST
APPENDIX M - PENDULUM-IMPACT TEST
APPENDIX N - VIBRATION (SINUSOIDAL MOTION) TEST
APPENDIX O - LEAKS IN CONTAINERS
APPENDIX P - MECHANICAL HANDLING TEST
APPENDIX Q - MINIMIZATION OF HYDROGEN EMBRITTLEMENT IN
PH 17-4/7 H900 COUPLED WITH ALUMINUM IN PHST
CENTER DESIGNED EQUIPMENT
Describes general design guidelines and associated tests for specialized shipping containers used by the Department of Defense.
This standard establishes general design guidelines and associated tests for specialized shipping
containers used by the Department of Defense. Definitive requirements for specific containers will be defined by the individual specification, acquisition, or task order. This standard is intended to be used as the basic reference document in all specifications and standards prescribing performance requirements to be applied to a specialized shipping container. Compliance with this intent is expected through normal application of the specification or standard preparation and revision processes.
| DevelopmentNote |
Supersedes MIL C 5584 (07/2004)
|
| DocumentType |
Standard
|
| Pages |
142
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| AOP 20 : 2017 | SAFETY, ARMING AND FUNCTIONING SYSTEMS MANUAL OF TESTS |
| MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL-STD-1791 Revision C:2017 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| MIL-DTL-32525 Base Document:2016 | MAGAZINE, PORTABLE (SHIPBOARD) |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-STD-1904 Revision B:2016 | Test Standards for Level A and Level B Packaging for Conventional Ammunition |
| MIL-S-87233 Base Document:1985 | SUPPORT EQUIPMENT SYSTEMS (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES WRIGHT PATTERSON AFB OH 45433-6503 |
| MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| MIL HDBK 157 : NOTICE 2 | TRANSPORTABILITY CRITERIA |
| MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
| MIL-HDBK-272 Revision A:1993 | NUCLEAR WEAPONS SYSTEMS, SAFETY DESIGN AND EVALUATION CRITERIA FOR |
| MIL-C-38226 Revision B:1987 | CONTAINER, POLYURETHANE, RIGID OR ELASTIC FOR PACKAGING SMALL ENGINES |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-STD-1475 Base Document:1974 | CONTAMINATION CONTROL TECHNOLOGY PACKAGING PROTECTION OF PRECISION CLEANED MATERIAL |
| MIL-STD-3028 Base Document:2009 | JOINT MODULAR INTERMODAL CONTAINER |
| MIL-S-23069 Revision A:1983 | SAFETY REQUIREMENTS, MINIMUM, FOR AIR LAUNCHED GUIDED MISSILES |
| MIL-STD-1367 Revision A:1989 | PACKAGING, HANDLING, STORAGE, AND TRANSPORTABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS) |
| MIL-S-81340 Revision B:1979 | SIGNAL, UNDERWATER SOUND (SUS) MARK 84 AND MODS |
| SAE ARP 4898 : 2005 | STANDS, SHIPPING AND STORAGE, AIRCRAFT ENGINES, REUSABLE |
| MIL-STD-1319 Revision A:1976 | ITEM CHARACTERISTICS AFFECTING TRANSPORTABILITY AND PACKAGING AND HANDLING EQUIPMENT DESIGN |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| MIL HDBK 1319 : 0 | DEPARTMENT OF DEFENSE HANDBOOK - ITEM CHARACTERISTICS AFFECTING TRANSPORTABILITY AND PACKAGING AND HANDLING EQUIPMENT DESIGN |
| AAS3P-10 : 2011 | SAFETY AND SUITABILITY FOR SERVICE ASSESSMENT TESTING FOR SHOULDER LAUNCHED MUNITIONS |
| MIL-STD-1660 Revision A:2008 | DESIGN CRITERIA STANDARD - AMMUNITION UNIT LOADS |
| MIL-PRF-81705 Revision E:2009 | Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| SAE AS 5017 : 1997 | AIR FILLING VALVES |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ISO 14644-2:2015 | Cleanrooms and associated controlled environments Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| SAE AMS 3269 : 2011 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES HIGH STRENGTH, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| STANAG 2829 : 2016 | MATERIALS HANDLING EQUIPMENT |
| CFR 40(PTS260-265) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| CFR 40(PTS100-135) : JUL 2017 | PROTECTION OF ENVIRONMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| IEST RD DTE012.2 : 2006 | HANDBOOK FOR DYNAMIC DATA ACQUISITION AND ANALYSIS |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| SAE AS 27166 : 1998 | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| MIL-STD-3010 Revision B:2008 | Test Procedures for Packaging Materials and Containers |
| MIL-HDBK-1791 Base Document:1997 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| MIL-I-81508 Base Document:1966 | INDICATOR PLUG, FOR MISSILE PROPELLANTS |
| A-A-55057 Revision B:2010 | PANELS, WOOD/WOOD BASED: CONSTRUCTION AND DECORATIVE |
| SAE AS 5135 : 1997 | DESICCANT PORT AND DESICCANT HOLDER |
| CFR 40(PTS150-189) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| MIL-STD-709 Revision D:2009 | AMMUNITION COLOR CODING |
| MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| SAE AMS 3281 : 2016 | SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C) |
| ASTM D 4577 : 2005 | Standard Test Method for Compression Resistance of a Container Under Constant Load |
| ASTM D 5277 : 1992 | TEST METHOD FOR PERFORMING PROGRAMMED HORIZONTAL IMPACTS USING AN INCLINED IMPACT TESTER |
| MIL-STD-1904 Revision B:2016 | Test Standards for Level A and Level B Packaging for Conventional Ammunition |
| DOD-HDBK-743 Revision A:1991 | ANTHROPOMETRY OF U.S. MILITARY PERSONNEL (METRIC) |
| ASTM D 880 : 1992 : R2002 | Standard Test Method for Impact Testing for Shipping Containers and Systems |
| ASTM E 662 : 2017-02 | TEST METHOD FOR SPECIFIC OPTICAL DENSITY OF SMOKE GENERATED BY SOLID MATERIALS |
| SAE AS 5389 : 2001 | PALLET LIFT TRUCK AND CONTAINER FORK POCKET INTERFACE |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| STANAG 2828 : 2015 | MILITARY PALLETS, PACKAGES AND CONTAINERS |
| ISO 14644-1:2015 | Cleanrooms and associated controlled environments Part 1: Classification of air cleanliness by particle concentration |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| MIL-STD-1366 Revision E:2006 | INTERFACE STANDARD FOR TRANSPORTABILITY CRITERIA |
| ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
| MIL-D-3716 Revision B:1987 | DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION |
| ASTM D 642 : 2015 : REDLINE | Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads |
| CFR 40(PTS136-149) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| SAE AS 26860 : 1998 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-HDBK-304 Revision C:1997 | PACKAGE CUSHIONING DESIGN |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| GEIA EIA649B:2011 | CONFIGURATION MANAGEMENT STANDARD |
| ASTM E 162 : 2016 : REDLINE | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| MIL-STD-209 Revision K:2005 | LIFTING AND TIEDOWN PROVISIONS |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.