WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR

Available format(s)

PDF

Publisher

US Military Specs/Standards/Handbooks

Covers main and auxiliary wheel and brake assemblies for all types of military aircraft.

Committee	FSC 1630
DevelopmentNote	INACTIVE FOR NEW DESIGN 30/8/99
DocumentType	Standard
Pages	72
PublisherName	US Military Specs/Standards/Handbooks
Status	Current

MIL A 8862 : 0	AIRPLANE STRENGTH AND RIGIDITY, LANDPLANE, LANDING AND GROUND HANDLING LOADS
SAE ARP 5632 : 2016	ROTORCRAFT: APPLICATION OF EXISTING AIRCRAFT DESIGNED TIRES, WHEELS AND BRAKES
SAE AS 707 : 2013	THERMAL SENSITIVE INFLATION PRESSURE RELEASE DEVICES FOR TUBELESS AIRCRAFT WHEELS
DEFSTAN 00-970(PT0)/9(2012) : 2012	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/7(2011) : 2011	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/14(2014) : 2014	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/12(2014) : 2014	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/13(2014) : 2014	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/11(2013) : 2013	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/8(2011) : 2011	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT0)/10(2013) : 2013	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS
DEFSTAN 00-970(PT7)SEC3/3(2010) : 2010	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 3: STRUCTURAL STRENGTH AND DESIGN FOR OPERATION ON SPECIFIED SURFACES
MIL B 8075 : D	BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
MIL-HDBK-516 Revision C:2014	AIRWORTHINESS CERTIFICATION CRITERIA
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
MIL-L-87139 Base Document:1979	LANDING GEAR SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES. WRIGHT-PATTERSON AFB OH 45433-6503
SAE AIR 1934 : 2016	USE OF STRUCTURAL CARBON HEAT SINK BRAKES ON AIRCRAFT
RE.AERO 63001 : 1999	QUALIFICATION CONDITIONS FOR WHEELS AND BRAKES FOR MILITARY AIRCRAFT
SAE AIR 4012 : 2012	USAF AIRCRAFT WHEELS
MIL M 7700 : E	MANUALS AND ABBREVIATED CHECKLISTS, FLIGHT
DEFSTAN 00-970(PT7)SEC3/2(2007) : 2007	DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 3: STRUCTURAL STRENGTH AND DESIGN FOR OPERATION ON SPECIFIED SURFACES
MIL PRF 7700 : F	MANUALS AND ABBREVIATED CHECKLISTS, FLIGHT

MIL-B-7874 Revision B:1982	BOLT, MACHINE 1200 DEGREES F
PPP-T-76 Revision C:1976	TAPE, PRESSURE SENSITIVE ADHESIVE, PACKAGING/PAPER (FOR CARTON SEALING)
MIL B 8075 : D	BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF
MS27611 Revision G:2015	VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE
MIL-I-8500 Revision D:1980	INTERCHANGEABILITY AND REPLACEABILITY OF COMPONENT PARTS FOR AEROSPACE VEHICLES
MIL-STD-129 Revision R:2014	Military Marking for Shipment and Storage
MIL-STD-970 Base Document:1987	STANDARDS AND SPECIFICATIONS, ORDER OF PREFERENCE FOR THE SELECTION OF
MS15795 Revision G:1986	WASHER, FLAT METAL ROUND GENERAL PURPOSE (IN./MM)
MIL-STD-130 Revision N:2007	IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
MIL-A-8863 Revision C:1993	AIRPLANE STRENGTH AND RIGIDITY GROUND LOADS FOR NAVY ACQUIRED AIRPLANES
MIL-R-8791-1 Base Document:1989	RETAINER, PACKING, HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, (SINGLE TURN)
PPP-B-636 Revision J:1981	BOX, SHIPPING, FIBERBOARD
AN 960 : 0021	WASHER, FLAT
MIL-C-81907 Base Document:1972	COATING SYSTEM, POLYURETHANE, ALIPHATIC, WEATHER RESISTANT, PROCESS FOR APPLICATION OF
MS20002 Revision E:1972	WASHER, COUNTERSUNK AND PLAIN, HIGH STRENGTH
MIL C 25427 : A	COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT
ASTM D 1141 : 1998 : EDT 1	Standard Practice for the Preparation of Substitute Ocean Water
MIL V 19068 : A	VALVE, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 11 SYSTEMS
MIL-STD-2073-1 Revision E:2008	STANDARD PRACTICE FOR MILITARY PACKAGING
MIL-H-6875 Revision H:1989	HEAT TREATMENT OF STEEL RAW MATERIALS
MIL-A-22771 Revision D:1984	ALUMINUM ALLOY FORGINGS, HEAT TREATED
MS14157 Revision B:1978	BOLT WHEEL TENSION FLANGED STEEL 180KSI FTU 450 DEG F EXTEND SPLINE DRIVE
MIL-B-8584 Revision C:1970	BRAKE SYSTEMS, WHEEL, AIRCRAFT, DESIGN OF
MIL-S-8802 Revision F:1990	SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION
MIL F 18264 : D	FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF
MIL L 81352 : A	LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS)
MIL S 5002 : D	SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
MIL P 23377 : G	PRIMER COATING, EPOXY, HIGH SOLIDS
MIL-T-9046 Revision J:1983	TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE
MIL-STD-2175 Revision A:1993	CASTING, CLASSIFICATION AND INSPECTION OF
MIL-HDBK-275 Revision A:1976	GUIDE FOR SELECTION OF LUBRICANTS, FLUIDS AND COMPOUNDS FOR USE IN FLIGHT VEHICLES AND COMPONENTS
MIL STD 470 : B	MAINTAINABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS)
MIL-STD-889 Revision C:2016	DISSIMILAR METALS
MIL B 121 : F	BARRIER MATERIAL, GREASEPROOFED, WATERPROOFED, FLEXIBLE
PPP-T-60 Revision E:1986	TAPE, PACKAGING, WATERPROOF
MIL-STD-6866 Base Document:1985	INSPECTION, LIQUID PENETRANT
QQ-C-320 Revision B:1974	CHROMIUM PLATING (ELECTRODEPOSITED)
MIL-F-7190 Revision B:1985	FORGING, STEEL, FOR AIRCRAFT AND AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS
MIL-STD-838 Revision C:1983	LUBRICATION OF MILITARY EQUIPMENT
MIL-T-10727 Revision C:1989	TIN PLATING, ELECTRODEPOSITED OR HOT-DIPPED FOR FERROUS AND NONFERROUS METALS
MIL-STD-2154 Base Document:1982	INSPECTION, ULTRASONIC, WROUGHT METALS, PROCESS FOR
MIL I 6870 : E	INSPECTION PROGRAM REQUIREMENTS NONDESTRUCTIVE FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS
MIL-B-6812 Revision E:1994	BOLTS, AIRCRAFT
QQ-A-596 Revision E:1981	ALUMINUM ALLOY PERMANENT AND SEMI-PERMANENT MOLD CASTINGS
MIL-G-5514 Revision G:1993	GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR
SAE AS 666 : 1982	CAVITY DESIGN AND O-RING SELECTION FOR STATIC SEAL USE IN AIRCRAFT TUBELESS TIRE WHEELS
MS14177 Revision B:1991	ADAPTER,AIR TURBINE STARTER TO ENGINE MOUNTING
MIL-STD-882 Revision E:2012	System Safety
MIL-B-7838 Revision C:1989	BOLT, INTERNAL WRENCHING 160 KSI FTU
MS27436 Revision B:1985	Valve Special, Aircraft Wheel
MIL C 5541 : E	CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS
MIL-S-8879 Revision C:1991	SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
MIL T 5041 : J	TIRE, PNEUMATIC, AIRCRAFT
MIL-A-8868 Revision B:1987	AIRPLANE STRENGTH AND RIGIDITY DATA AND REPORTS
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
MIL-H-8775 Revision D:1976	HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR
MIL-A-21180 Revision D:1984	ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH
MS14155 Base Document:1974	WASHER, RECESSED COUNTERSUNK TWO SURFACES FOR USE WITH WHEEL BOLTS AND NUTS UP TO AND INCLUDING 180 KSI FTU
TT-P-28 Revision H:2007	PAINT, ALUMINUM, HEAT RESISTING
MIL-P-116 Revision J:1988	PRESERVATION, METHODS OF
MIL-STD-1472 Revision G:2012	HUMAN ENGINEERING
QQ-A-601 Revision F:1981	ALUMINUM ALLOY SAND CASTINGS
MIL-T-18303 Revision B:1966	TEST PROCEDURES, REPRODUCTION, ACCEPTANCE, AND LIFE FOR AIRCRAFT ELECTRONIC EQUIPMENT, FORMAT FOR
MIL-H-5440 Revision H:1993	HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL-P-81985 Base Document:1974	PEENING OF METALS
QQ-P-416 Revision F:1991	PLATING, CADMIUM (ELECTRODEPOSITED)
MIL G 83016 : NOTICE 1	GAGE, AIRCRAFT WHEEL, INTEGRAL, TIRE PRESSURE INDICATING
MIL-P-83461 Revision B:1980	PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C)
MIL-C-8837 Revision B:1983	COATING, CADMIUM (VACUUM DEPOSITED)
MS14156 Base Document:1974	NUT, WHEEL SELF LOCKING FLANGED STEEL 180 KSI FTU 450 DEG F SPINE DRIVE
MIL-T-5544 Revision C:1991	THREAD COMPOUND, ANTISEIZE, GRAPHITE-PETROLATUM
MIL-B-8831 Revision B:1982	BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR
MIL-G-4343 Revision C:1978	GREASE, PNEUMATIC SYSTEMS
MIL G 81322 : E	GREASE, AIRCRAFT, GENERAL PURPOSE, SIDE TEMPERATURE RANGE, NATO CODE NUMBER G-395
MIL-STD-105 Revision E:1989	SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
MIL-C-83286 Revision B:1973	COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS
MIL-F-3541 Revision C:1989	FITTING, LUBRICATION, GENERAL SPECIFICATION FOR
FED-STD-595 Revision C:2008	COLORS USED IN GOVERNMENT PROCUREMENT
MIL-STD-785 Revision B:1980	RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION
PPP-C-843 Revision D:1977	CUSHIONING MATERIAL, CELLULOSIC
MIL-F-83142 Revision A:1969	FORGING, TITANIUM ALLOYS, PREMIUM QUALITY
SAE AS 707 : 2013	THERMAL SENSITIVE INFLATION PRESSURE RELEASE DEVICES FOR TUBELESS AIRCRAFT WHEELS
MIL-F-7179 Revision G:1993	FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM
MIL-A-8860 Revision B:1987	AIRPLANE STRENGTH AND RIGIDITY GENERAL SPECIFICATION FOR
MIL-P-81958 Base Document:1974	PRESSURE RELIEF DEVICES, OVERPRESSURIZATION PREVENTION, WHEEL/TIRE, AIRCRAFT