NBN EN 14175-4 : 2004

Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General on-site test conditions
5 Commissioning testing of type tested fume cupboards
  5.1 Scope and purpose
  5.2 Inspections
  5.3 Manufacturer's declarations or type test certification
  5.4 Face velocity test
       5.4.1 Objectives
       5.4.2 Test equipment and probe positions
       5.4.3 Test procedure and test results
       5.4.4 Test report
  5.5 Extract volume flow rate test
       5.5.1 Objectives
       5.5.2 Average face velocity method
       5.5.3 Calibrated pressure difference method
  5.6 Pressure drop test
       5.6.1 Objectives
       5.6.2 Test equipment and test procedure
       5.6.3 Expression of results
  5.7 Air flow visualization
       5.7.1 Objectives
       5.7.2 Test procedure
       5.7.3 Expression of results
  5.8 Room air velocity test
       5.8.1 Objectives
       5.8.2 Test equipment
       5.8.3 Probe positions
       5.8.4 Test procedure and test results
  5.9 Alarm system test
       5.9.1 Alarm by overriding the vertical sash stop
       5.9.2 Air flow indicator
  5.10 Containment test
       5.10.1 Objectives
       5.10.2 Test equipment, test procedure and data analysis
       5.10.3 Test report
  5.11 Sound pressure measurement
       5.11.1 Objectives
       5.11.2 Test procedure
       5.11.3 Test report
6 Routine testing of type tested fume cupboards
  6.1 Scope and purpose
  6.2 Face velocity test
       6.2.1 Objectives
       6.2.2 Test equipment and test procedure
       6.2.3 Test report
  6.3 Extract volume flow rate test
       6.3.1 Objectives
       6.3.2 Sequential average face velocity test
  6.4 Pressure drop test
  6.5 Air flow visualization
  6.6 Alarm system test
  6.7 Inspections
7 Qualification testing of non type tested fume cupboards
  7.1 Scope and purpose
  7.2 Inspections
  7.3 Manufacturer's declarations
  7.4 Face velocity test
  7.5 Extract volume flow rate test
  7.6 Pressure drop test
  7.7 Air flow visualization
  7.8 Room air velocity test
  7.9 Alarm system test
  7.10 Containment test
  7.11 Robustness of containment
  7.12 Air exchange efficiency
  7.13 Sound pressure measurement
  7.14 Illuminance test
8 Routine testing of qualified fume cupboards
9 On-site test reports
  9.1 Test report for commissioning testing of type
       tested fume cupboards
  9.2 Test report for routine testing of type tested
       fume cupboards
  9.3 Test report for qualification testing of non type
       tested fume cupboards
  9.4 Test report for routine testing of qualified fume
       cupboards
National annex NA (informative) Recommendations for
                  the exchange of information and
                  recommendations for installation