We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
  • NEMA MG 1 : 2016

    Current The latest, up-to-date edition.
    Add to Watchlist
    This Standard has been added successfully to your Watchlist.
    Please visit My Watchlist to see all standards that you are watching.
    Please log in or to add this standard to your Watchlist.
    We could not add this standard to your Watchlist.
    Please retry or contact support for assistance.
    You need to be logged in to add this standard to your Watchlist.
    Please log in now or create an account to add.
    You already added this Product in the Watchlist.

    MOTORS AND GENERATORS

    Available format(s): 

    Language(s): 

    Published date:  23-11-2012

    Publisher:  National Electrical Manufacturers Association

    Add to Watchlist

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 1 - REFERENCED STANDARDS AND DEFINITIONS
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 2 - TERMINAL MARKINGS
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 3 - HIGH-POTENTIAL TESTS
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 4 - DIMENSIONS, TOLERANCES, AND MOUNTING
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 5 - ROTATING ELECTRICAL MACHINES -
                CLASSIFICATION OF DEGREES OF PROTECTION
                PROVIDED BY ENCLOSURES FOR ROTATING MACHINES
    Section I - GENERAL STANDARDS APPLICABLE TO ALL MACHINES
                Part 6 - ROTATING ELECTRICAL MOTORS - METHODS
                OF COOLING (IC CODE)
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 7 - MECHANICAL VIBRATION-MEASUREMENT,
                EVALUATION AND LIMITS
    Section I - GENERAL STANDARDS APPLYING TO ALL MACHINES
                Part 9 - ROTATING ELECTRICAL MOTORS - SOUND
                POWER LIMITS AND MEASUREMENT PROCEDURES
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 10 - AC SMALL AND MEDIUM MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 10 - DC SMALL AND MEDIUM MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 12 - TESTS AND PERFORMANCE - AC
                 AND DC MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 12 - TESTS AND PERFORMANCE - AC
                 MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 12 - TESTS AND PERFORMANCE - DC
                 SMALL AND MEDIUM MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 13 - FRAME ASSIGNMENTS FOR
                 ALTERNATING CURRENT INTEGRAL HORSEPOWER
                 INDUCTION MOTORS
    SECTION II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL
                 MACHINES) Part 14 - APPLICATION DATA - AC AND
                 DC SMALL AND MEDIUM MACHINES
    SECTION II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 14 - APPLICATION DATA - AC SMALL
                 AND MEDIUM MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 14 - APPLICATION DATA - DC SMALL
                 AND MEDIUM MOTORS
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 15 - DC Generators
    Section II - SMALL (FRACTIONAL) AND MEDIUM (INTEGRAL)
                 MACHINES Part 18 - DEFINITE PURPOSE MACHINES
    Section III - LARGE MACHINES Part 20 - LARGE MACHINES
                  - INDUCTION MACHINES
    Section III - LARGE MACHINES Part 21 - LARGE MACHINES
                  - SYNCHRONOUS MOTORS
    Section III - LARGE MACHINES Part 23 - LARGE MACHINES
                  - DC MOTORS LARGER THAN 1.25 HORSEPOWER
                  PER RPM, OPEN TYPE
    Section III - LARGE MACHINES Part 24 - LARGE MACHINES
                  - DC GENERATORS LARGER THAN 1.0 KILOWATT
                  PER RPM, OPEN TYPE CLASSIFICATION
    Section IV - PERFORMANCE STANDARDS APPLYING TO ALL
                 MACHINES Part 30 - APPLICATION CONSIDERATIONS
                 FOR CONSTANT SPEED MOTORS USED ON A SINUSOIDAL
                 BUS WITH HARMONIC CONTENT AND GENERAL PURPOSE
                 MOTORS USED WITH ADJUSTABLE-VOLTAGE OR
                 ADJUSTABLE-FREQUENCY CONTROLS OR BOTH
    Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
                 Part 31 - DEFINITE-PURPOSE INVERTER-FED POLYPHASE
                 MOTORS
    Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
                 Part 32 - SYNCHRONOUS GENERATORS (EXCLUSIVE OF
                 GENERATORS COVERED BY ANSI STANDARDS C50.12,
                 C50.13, C50.14, AND C50.15 ABOVE 5000 kVA) RATINGS
    Section IV - PERFORMANCE STANDARDS APPLYING TO ALL MACHINES
                 Part 33 - DEFINITE PURPOSE SYNCHRONOUS GENERATORS
                 FOR GENERATING SET APPLICATIONS

    Abstract - (Show below) - (Hide below)

    Includes practical information concerning performance, safety, testing, and construction and manufacture of ac and dc motors and generators.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes NEMA MG 13 (05/2002) Also available as a Network CD format. (09/2016)
    Document Type Standard
    Publisher National Electrical Manufacturers Association
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE 1531 : 2003 GUIDE FOR APPLICATION AND SPECIFICATION OF HARMONIC FILTERS
    C282-15 Emergency electrical power supply for buildings
    08/30183108 DC : DRAFT MAY 2008 BS IEC/TS 60034-31 - ROTATING ELECTRICAL MACHINES - PART 31: GUIDE FOR THE SELECTION AND APPLICATION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE-SPEED APPLICATIONS
    WW F 2743 : A FURNACES, WARM AIR & HEATERS, UNIT, FORCED AIR CIRCULATION, OIL & GAS FIRED
    CSA C747 : 2009 : INC : UPD 1 : 2016 : R201400 ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
    ASME B73.2 : 2016 Specification for Vertical In-Line Centrifugal Pumps for Chemical Process
    GGG L 795 : E LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING
    EEE 602 : 2007 ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
    MIL PRF 23798 : D AIR CONDITIONER, FAN-COIL ASSEMBLY
    A A 59618 : 0 CLEANER, PRESSURE, HOT-WATER, SKID-MOUNTED
    A A 59393 : 0 MILLING MACHINE, VERTICAL MULTISPINDLE, DOUBLE COLUMN, COMPUTER NUMERICAL CONTROL (CNC)
    ASME BTH 1 : 2017 DESIGN OF BELOW-THE-HOOK LIFTING DEVICES
    A A 59460 : 0 PLATING UNIT, SELECTIVE (BRUSH), PORTABLE
    BS EN 60034-30 : 2009 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
    CSA C22.2 No. 100 : 2014 MOTORS AND GENERATORS
    IEEE C37.16 : 2009 PREFERRED RATINGS, RELATED REQUIREMENTS, AND APPLICATION RECOMMENDATIONS FOR LOW-VOLTAGE AC (635 V AND BELOW) AND DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS
    MIL H 4607 : E HEATER, ENGINE AND SHELTER, GROUND
    OO S 236 : E SAW, CIRCULAR, TABLE TYPE, WOODWORKING, SINGLE TILTING ARBOR, FLOOR MOUNTED
    MIL PRF 43001 : G WASHER-EXTRACTORS, LAUNDRY, COMMERCIAL
    F S 2911 : 0 STOKERS, MECHANICAL - FOR PACKAGED BOILERS FIRED ON COAL OR A COMBINATION OF COAL-GAS, COAL-OIL, OR COAL-GAS-OIL (2,000 TO 50,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    GGG S 58 : F SAW, RADIAL OVERARM, WOODWORKING
    MIL L 80007 : E LATHES, TOOLROOM, 11-INCH THROUGH 13-INCH
    CEI EN 60034-30-1 : 2015 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    IEEE DRAFT 841 : MARCH 2000 DRAFT STANDARD FOR PETROLEUM AND CHEMICAL INDUSTRY - SEVERE DUTY TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KV (500HP)
    API 687 : 2001 : R2009 ROTOR REPAIR
    A A 59472 : 0 TUMBLER, DRYING, LAUNDRY (NAVAL SUBMARINE)
    IEEE DRAFT C37.06 : D6 2004 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
    MIL C 13962 : B CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR
    ASME HST 4M : 1991 PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
    IEEE C37.06 : 2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES FOR VOLTAGES ABOVE 1000 V
    ASTM F 2646 : 2016 : REDLINE Standard Specification for Bread Slicing Machines
    OO P 2895 : 0 PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY
    MIL B 17095 : H BOILERS, STEAM, WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    F B 2902 : 0 BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    MIL B 26994 : E BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE
    AMCA 208 : 2018 CALCULATION OF THE FAN ENERGY INDEX
    MIL M 80016 : C MILLING MACHINE, VERTICAL, SWIVEL HEAD, KNEE AND COLUMN, RAM AND TURRET TYPE
    CEI EN 60034-30 : 2011 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE CODE)
    IEEE 1290 : 2015 GUIDE FOR MOTOR-OPERATED VALVE (MOV) MOTOR APPLICATION, PROTECTION, CONTROL, AND TESTING IN NUCLEAR POWER-GENERATING STATIONS
    MIL W 80119 : B WELDING SYSTEMS, ELECTRON BEAM, VACUUM TYPE, COMPUTER NUMERICALLY CONTROLLED (CNC)
    12/30243450 DC : DRAFT FEB 2012 BS ISO 20958-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ELECTRICAL SIGNATURE ANALYSIS - PART 1: THREE-PHASE INDUCTION MOTORS
    MIL S 4880 : G NOTICE 1 SWEEPER, MAGNET, SELF-PROPELLED
    ASME HST 4 : 1999 : R2010 PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
    MIL B 45081 : E BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR
    IEEE 434 : 2006 FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE
    MIL B 9925 : D BORING MACHINES, JIB, VERTICAL, SINGLE COLUMN AND DOUBLE COLUMN BRIDGE TYPES, MANUAL AND POWER FEED
    MIL P 80104 : D PRESSES, SWAGING, WIRE ROPE FITTING, HYDRAULIC POWERED, ELECTRIC MOTOR DRIVEN
    ASTM F 860 : 2007 : R2013 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
    API 618 : 2007 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    MIL B 29205 : A BOILERS, FLUIDIZED BED, STEAM AND HOT WATER, PACKAGED TYPE (330 TO 51,500 POUNDS PER HOUR THERMAL OUTPUT CAPACITY)
    API 611 REDLINE : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    ABS 0063 : 2018 COR 2018 RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
    MIL F 80258 : A FURNACES, HEAT-TREATING, ELECTRIC, NATURAL ATMOSPHERE, BOX TYPE
    FM 1043 : 2011 WATER FLOW DETECTOR TESTERS 1 INCH THROUGH 8 INCH NOMINAL SIZE
    A A 59471 : 0 DRY CLEANING PRESSES AND FINISHING EQUIPMENT (NAVAL SHIPBOARD)
    MIL PRF 26139 : E : 2015 TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1)
    MIL M 80255 : B MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC)
    F B 2903 : 0 BOILERS, STEAM AND HOT WATER, FIRETUBE, SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    MIL B 18966 : C BLOCKING PLANT, CONCRETE
    IEEE 1547.1 : 2005 CONFORMANCE TEST PROCEDURES FOR EQUIPMENT INTERCONNECTING DISTRIBUTED RESOURCES WITH ELECTRIC POWER SYSTEMS
    IEEE 334 : 2007 QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS
    IEEE 946 : 2004 DESIGN OF DC AUXILIARY SYSTEMS FOR GENERATING SYSTEMS
    A-A-59412 : A SWAGING MACHINE, ROTARY, FLOOR-MOUNTED
    DD CLC/TS 60034-31 : 2011 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
    A A 59332 : A GRINDING MACHINE, CYLINDRICAL, EXTERNAL, CENTER-TYPE, COMPUTER NUMERICAL CONTROL (CNC)
    BS ISO 20958 : 2013 CONDITION MONITORING AND DIAGNOSTICS OF MACHINE SYSTEMS - ELECTRICAL SIGNATURE ANALYSIS OF THREE-PHASE INDUCTION MOTORS
    CSA C747:2009 ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
    MIL P 80054 : D PUNCHING MACHINE, METAL, TURRET TYPE, NUMERICALLY CONTROLLED
    NEMA MGW 1 : 2013 THE U.S. DEPARTMENT OF ENERGY SMALL ELECTRIC MOTOR STANDARDS FINAL RULE AND TECHNICAL SUPPORT DOCUMENT OF MARCH 9, 2010
    MIL C 3925 : H COMPRESSOR, RECIPROCATING AND ROTARY POWER DRIVEN, AIR [PAINT SPRAY TYPE]
    CSA C392 : 2011 : INC : UPD 1 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    DD IEC TS 60034-31 : DRAFT JULY 2010 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
    CSA C392 : 2011 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    MIL HDBK 705 : C GENERATOR SETS, ELECTRICAL, MEASUREMENTS AND INSTRUMENTATIONS
    MIL F 80113 : D FURNACE, VACUUM, HEAT TREATING AND BRAZING
    MIL F 80089 : B FURNACES, HEAT-TREATING, GAS-FIRED, BOX-TYPE, DIRECT-FIRED AND FULL-MUFFLE DESIGN
    MIL D 80002 : E DRILLING MACHINE, UPRIGHT FLOOR TYPE, ROUND & BOX COLUMN, SLIDING HEAD, PLAIN TABLE, POWER FEED
    IEEE 1068:2015 THE REPAIR AND REWINDING OF AC ELECTRIC MOTORS IN THE PETROLEUM, CHEMICAL, AND PROCESS INDUSTRIES
    NEMA MG 11 : 1977(R2012) ENERGY MANAGEMENT GUIDE FOR SELECTION AND USE OF SINGLE-PHASE MOTORS
    API 680 : 1ED 87 PACKAGED RECIPROCATING PLANT AND INSTRUMENT AIR COMPRESSORS FOR GENERAL REFINERY SERVICES
    ASAE EP329 : 2001 SINGLE-PHASE RURAL DISTRIBUTION SERVICE FOR MOTORS AND PHASE CONVERTERS
    NEMA ICS 16 : 2001 MOTION/POSITION CONTROL MOTORS, CONTROLS, AND FEEDBACK DEVICES
    A A 59200 : 0 GRINDING MACHINES, SURFACE, ROTARY TABLE, VERTICAL SPINDLE
    MIL PRF 62331 : A PUMP ASSEMBLY, BILGE, ELECTRIC MOTOR DRIVEN, DIRECT CURRENT
    A A 50304 : 0 DYNAMOMETER, ENGINE RUN-IN, 500 HORSEPOWER CAPACITY
    OO M 340 : F MILLING, GRINDING, DRILLING, SLOTTING ATTACHMENT
    MIL PRF 18953 : C FANS, VANEAXIAL AND TUBEAXIAL, VENTILATION AND AIR CONDITIONING, NAVAL SHIPBOARD
    BS EN 60034-30-1 : 2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    MIL F 80233 : B FURNACES, VACUUM, HEAT TREATING INTEGRAL QUENCH
    OO J 571 : F JOINTERS, WOODWORKING
    MIL S 3788 : G SHAPER, WOODWORKING
    11/30247355 DC : 0 BS EN 60034-30 ED 2 - ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
    SAE ARP 1148 : 2013 GROUND ELECTRICAL POWER UNIT, TRANSPORTABLE 115/200 VOLT AC (NOMINAL) 400 HERTZ, 3-PHASE 4-WIRE (GROUNDED NEUTRAL) Y-CONNECTED SYSTEM
    MIL DTL 38195 : D GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE
    NEMA MG 3 : 1974(R2014) SOUND LEVEL PREDICTION FOR INSTALLED ROTATING ELECTRICAL MACHINES
    AWWA E103 : 2015 HORIZONTAL AND VERTICAL LINE-SHAFT PUMPS
    MIL P 17552 : F PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL, GENERAL SERVICE AND BOILER FEED, ELECTRIC MOTOR OR STEAM TURBINE DRIVEN
    IEEE DRAFT C62.22 : D8 2005 GUIDE FOR THE APPLICATION OF METAL-OXIDE SURGE ARRESTERS FOR ALTERNATING-CURRENT SYSTEMS
    IEEE DRAFT 387 : D9A MAR 95 DRAFT STANDARD CRITERIA FOR DIESEL-GENERATOR UNITS APPLIED AS STANDBY POWER SUPPLIES FOR NUCLEAR POWER GENERATING STATIONS
    MIL S 24036 : E SAWS, BAND, CUTOFF, HORIZONTAL, NON-ADJUSTABLE & ADJUSTABLE CUTTING ANGLE
    MIL P 80276 : 0 PRESS BRAKES, HYDRAULICALLY OPERATED, SHEET AND PLATE, COMPUTER NUMERICALLY CONTROLLED (CNC)
    BS PD IEC/TS 60034-30-2 : 2016 ROTATING ELECTRICAL MACHINES - PART 30-2: EFFICIENCY CLASSES OF VARIABLE SPEED AC MOTORS (IE-CODE)
    A A 59392 : 0 GRINDING MACHINES, SURFACE, ROTARY TABLE, HORIZONTAL SPINDLE
    MIL B 28685 : 0 BAGHOUSE, REVERSE PULSE JET; FOR PACKAGED BOILEK3 FIRED ON COAL OR A COMBINATION OF COAL AND GAS, COAL AND OIL, OR COAL-GAS-OIL (2,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    ASME HST 1M : 89(R1995) PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS
    KKK S 2922 : 0 SEMITRAILER, VAN; COMMERCIAL (FURNITURE, PERSONNEL, REFRIGERATOR, CARGO, AND SIDE CURTAIN) 7 TO 35 TON
    MIL PRF 24751 : A FANS, VANEAXIAL GAS TURBINE ENCLOSURE COOLING NAVAL SHIPBOARD
    MIL G 53133 : B GENERATOR SETS, SKID MOUNTED, TACTICAL, QUIET, DIESEL ENGINE DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR
    MIL-PRF-80095E : 2015 SAWS, BAND, WOODWORKING
    NEMA ICS8 : 2011 APPLICATION GUIDE FOR INDUSTRIAL CONTROL AND SYSTEMS CRANE AND HOIST CONTROLLERS
    MIL L 13896 : E LATHES, ENGINE, GAP, SLIDING BED AND REMOVABLE BLOCK
    CSA C390 : 2010 : R2015 TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
    MIL PRF 52109 : H PUMPING ASSEMBLIES, PORTABLE, BULK TRANSFER FUEL AND WATER PUMPING SERVICE
    MIL PRF 19004 : B FANS, CENTRIFUGAL, VENTILATION, NAVAL SHIPBOARD
    ASTM F 860 : 2007 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
    MIL P 80172 : C PUNCHING MACHINE, METAL SINGLE END TYPE, NUMERICALLY CONTROLLED
    MIL L 23251 : E LATHES, ENGINE AND TOOLROOM 2516 AND 3220
    A A 59285 : 0 SAWS, POWER, HACK
    A A 59334 : 0 LATHE, ENGINE (STANDARD) AND TOOLROOM (PRECISION), HORIZONTAL SPINDLE
    NEMA SM 24 : 1991(R2002) LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW
    MIL B 12570 : D BAKERY OVEN, TRAILER MOUNTED, M-533
    XX C 2816 : A COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER
    MIL PRF 24775 : A AIR CONDITIONING FAN COIL UNITS, HORIZONTAL AND VERTICAL TYPES, NAVAL SHIPBOARD
    ASTM F 1433 : 1997 : R2004 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
    CSA C392 : 2011 : INC : UPD 2 : 2012 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    CSA C390 : 2010(R2015) TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
    HI 1.1-1.5 : 1994 CENTRIFUGAL PUMPS - NOMENCLATURE, DEFINITIONS, APPLICATIONS AND OPERATION
    AWWA C542 : 2016 ELECTRIC MOTOR ACTUATORS FOR VALVES AND SLIDE GATES
    ASTM F 1202 : 2016 : REDLINE Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
    ASME HST 4 : 1999 : R2004 PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS
    MIL F 80133 : B FURNACES, HEAT TREATING, PIT TYPE, ELECTRIC, FORCED CONVECTION
    API 611 : 2008 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    MIL G 52884 : A GENERATOR SETS, DIESEL ENGINE DRIVEN, 15 THRU 200 KILOWATTS 50/60 & 400 HERTZ, (TACTICAL)
    A A 59384 : B PRESS, 'H' FRAME, HYDRAULIC
    CSA C747 : 2009 : R2014 ENERGY EFFICIENCY TEST METHODS FOR SMALL MOTORS
    A A 50314 : 0 BORING MACHINES, ENGINE CYLINDER (PORTABLE)
    CSA C392 : 2011 : R2016 TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT
    API 670 : 2014 MACHINERY PROTECTION SYSTEMS
    EEMUA 151 : 1987 LIQUID RING VACUUM PUMPS AND COMPRESSORS
    MIL B 45022 : F BLAST CLEANING CABINETS
    MIL PRF 24755 : B FANS, VANEAXIAL, HIGH PRESSURE, NAVAL SHIPBOARD
    CSA C390 : 2010 : INC : UPD 1 : 2015 : R201500 TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
    MIL P 80186 : B POSITIONERS, WELDING, ROTATING TABLE, CANTILEVER ARM DESIGN
    MIL S 80271 : A SHEARING MACHINE, METAL SQUARING MECHANICAL DRIVE
    MIL S 80224 : A SHEARING MACHINE, METAL NOTCHING, POWER DRIVEN
    CSA C390:2010 TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
    FM 1319 : 2018 CENTRIFUGAL FIRE PUMPS (HORIZONTAL, END SUCTION TYPE)
    CSA C390 : 2010 : INC : UPD 2 : 2016 :R201500 TEST METHODS, MARKING REQUIREMENTS, AND ENERGY EFFICIENCY LEVELS FOR THREE-PHASE INDUCTION MOTORS
    PIP ELEMT01 : 2013 GUIDELINES FOR SELECTING IEEE AND API STANDARDS FOR AC MOTORS 250 HP (185 KW) AND LARGER
    IEEE 95 : 2002 RECOMMENDED PRACTICE FOR INSULATION TESTING OF AC ELECTRIC MACHINERY (2300 V AND ABOVE) WITH HIGH DIRECT VOLTAGE
    ASTM F 2361 : 2003 : R2009 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
    ASTM F 857 : 2017 : REDLINE Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
    IEEE 1827 : 2016 ELECTRICAL AND CONTROL DESIGN OF HYDROELECTRIC WATER CONVEYANCE FACILITIES
    API 611 : 2008 : R2014 GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 11P : 1989 SPECIFICATION FOR PACKAGED RECIPROCATING COMPRESSORS FOR OIL AND GAS PRODUCTION SERVICES
    IEEE C37.100.1 : 2007 COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
    IEEE 3001.11 : 2017 APPLICATION OF CONTROLLERS AND AUTOMATION TO INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEEE 3004.8:2016 MOTOR PROTECTION IN INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    API 618 : 2007 : R2016 RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES
    API 687 : 2001 : R2015 ROTOR REPAIR
    IEEE 45.6:2016 IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing
    API TR 11L6 : 2008 TECHNICAL REPORT ON ELECTRIC MOTOR PRIME MOVER FOR BEAM PUMPING UNIT SERVICE
    HI 2.3 : 2013 ROTODYNAMIC VERTICAL PUMPS OF RADIAL, MIXED, AND AXIAL FLOW TYPES FOR DESIGN AND APPLICATION
    I.S. EN 60034-30-1:2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE)
    IEEE 45.1 : 2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    NEMA MG 7 : 93 REV 1 96 MOTION/POSITION CONTROL MOTORS AND CONTROLS
    SAE ARP 5015 : 2011 GROUND EQUIPMENT - 400 HERTZ GROUND POWER PERFORMANCE REQUIREMENTS
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    API 687 : 2001 ROTOR REPAIR
    FM 1312 : 2018 CENTRIFUGAL FIRE PUMPS (VERTICAL-SHAFT, TURBINE TYPE)
    IEEE C50.13 : 2014 CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE
    I.S. EN 60034-30:2009 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS
    API 11PGT : 1992 RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES
    ANSI C37.06 : 2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
    IEEE DRAFT C37.96 : D5 99 DRAFT GUIDE FOR AC MOTOR PROTECTION
    IEEE 1349 : 2011 GUIDE FOR THE APPLICATION OF ELECTRIC MOTORS IN CLASS 1, DIVISION 2 AND CLASS 1, ZONE 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    IEEE 43 : 2013 RECOMMENDED PRACTICE FOR TESTING INSULATION RESISTANCE OF ELECTRIC MACHINERY
    IEEE 841 : 2009 PETROLEUM AND CHEMICAL INDUSTRY - PREMIUM-EFFICIENCY, SEVERE-DUTY, TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KW (500 HP)
    IEEE 2030.2 : 2015 GUIDE FOR THE INTEROPERABILITY OF ENERGY STORAGE SYSTEMS INTEGRATED WITH THE ELECTRIC POWER INFRASTRUCTURE
    IEEE 115 : 2009 TEST PROCEDURES FOR SYNCHRONOUS MACHINES - PART 1: ACCEPTANCE AND PERFORMANCE TESTING - PART 2: TEST PROCEDURES AND PARAMETER DETERMINATION FOR DYNAMIC ANALYSIS
    ASTM F 2361 : 2003 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
    IEEE 112 : 2004 TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS AND GENERATORS
    NETA ATS : 2017 ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS
    IEEE DRAFT 1476 : D4.1 NOV 99 DRAFT STANDARD FOR PASSENGER TRAIN AUXILIARY POWER SYSTEMS INTERFACES
    FM 1370 : 2018 CENTRIFUGAL FIRE PUMPS (VERTICAL SHAFT, TURBINE TYPE, BARREL)
    FM 1311 : 2018 CENTRIFUGAL FIRE PUMPS SPLIT-CASE TYPE (AXIAL OR RADIAL)
    PIP ELSMT01 : 2012 AC SQUIRREL CAGE INDUCTION MOTOR SPECIFICATION (4000 VOLTS AND BELOW)
    S.R. CLC/TS 60034-31:2011 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
    CSA C838 : 2013 ENERGY EFFICIENCY TEST METHODS FOR THREE-PHASE VARIABLE FREQUENCY DRIVE SYSTEMS
    PIP RESE001 : 2017 GENERAL PURPOSE SKID-MOUNTED PACKAGED EQUIPMENT SPECIFICATION
    ASTM F 860 : 2007 : R2018 : EDT 1 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
    IEEE 1159 : 2009 RECOMMENDED PRACTICE FOR MONITORING ELECTRIC POWER QUALITY
    ASTM F 1203 : 2016 : REDLINE Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
    CSA C391 : 2015 TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT
    ASTM F 1433 : 1997 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner
    S6-14 Canadian Highway Bridge Design Code
    HI 1.3 : 2013 ROTODYNAMIC CENTRIFUGAL PUMPS FOR DESIGN AND APPLICATION
    IEEE DRAFT 434 : D10 2006 FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE
    ASTM F 2645 : 2016 : REDLINE Standard Specification for Bun Slicing Machines
    IEEE DRAFT 1068 : D3 JUN 96 RECOMMENDED PRACTICE FOR THE REPAIR AND REWINDING OF MOTORS FOR THE PETROLEUM AND CHEMICAL INDUSTRY
    ASTM F 2643 : 2015 : REDLINE Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
    ASTM F 1433 : 1997 : R2010 Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner (Withdrawn 2019)
    ISO 20958:2013 Condition monitoring and diagnostics of machine systems Electrical signature analysis of three-phase induction motors
    API 14FZ : 2013 RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS
    API 614 : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
    API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    MIL D 12491 : E DEGREASER, SOLVENT, TANK IMMERSION TYPE
    MIL B 17452 : E BOILERS, STEAM AND HOT WATER, FIRETUBE - SCOTCH PACKAGED TYPE (320,001 TO 35,000,000 BTU/HR THERMAL OUTPUT CAPACITY)
    MIL L 80277 : 0 LATHES, PRECISION, TOOLROOM, VARIABLE SPEED, 11-INCH THROUGH 13-INCH
    A A 59335 : 0 SAW, BAND, CUTOFF, HORIZONTAL, AND COMBINATION HORIZONTAL AND VERTICAL
    UFC 3-230-01 : Change 2 UNIFIED FACILITIES CRITERIA - WATER STORAGE, DISTRIBUTION, AND TRANSMISSION
    IEEE 741 : 2007 CRITERIA FOR THE PROTECTION OF CLASS 1E POWER SYSTEMS AND EQUIPMENT IN NUCLEAR POWER GENERATING STATIONS
    MIL DTL 53135 : 0 AUXILIARY POWER UNIT, 10 KW, 120/240 VAC, 60 HZ
    ASME B73.2M : 91(R1999) PUMPS - SPECIFICATION FOR VERTICAL IN-LINE CENTRIFUGAL PUMPS FOR CHEMICAL PROCESS
    CLC/TS 60034-31 : 2011 ROTATING ELECTRICAL MACHINES - PART 31: SELECTION OF ENERGY-EFFICIENT MOTORS INCLUDING VARIABLE SPEED APPLICATIONS - APPLICATION GUIDE
    ASME OM S/G : 2007 Standards and Guides for Operation and Maintenance of Nuclear Power Plants (OM-S/G - 2007)
    API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    API 614 REDLINE : 2008 LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES
    API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    ASTM F 1966 : 2012 Standard Specification for Dough Divider and Rounding Machines
    ASTM F 1966 : 2012 : R2017 : EDT 1 Standard Specification for Dough Divider and Rounding Machines
    ASTM F 2361 : 2003 : R2013 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
    ASHRAE 90.4 : 2016 ENERGY STANDARD FOR DATA CENTERS
    IEC 60034-27-4:2018 Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines
    IEC/IEEE PAS 63547:2011 Interconnecting distributed resources with electric power systems
    IEC TS 60034-31:2010 Rotating electrical machines - Part 31: Selection of energy-efficient motors including variable speed applications - Application guide
    ISO 10436:1993 Petroleum and natural gas industries — General-purpose steam turbines for refinery service
    ASME AG-1 : 2019 CODE ON NUCLEAR AIR AND GAS TREATMENT
    ASME AG 1 : 2012 CODE ON NUCLEAR AIR AND GAS TREATMENT
    NFPA 79 : 2018 ELECTRICAL STANDARD FOR INDUSTRIAL MACHINERY
    NFPA 1901:2016 AUTOMOTIVE FIRE APPARATUS
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    NFPA 20 HDBK : 2016 STATIONARY FIRE PUMPS HANDBOOK
    IEEE C37.96:2012 GUIDE FOR AC MOTOR PROTECTION
    IEEE 1566 : 2015 PERFORMANCE OF ADJUSTABLE-SPEED AC DRIVES RATED 375 KW AND LARGER
    IEEE 1147 : 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
    IEC 60034-30:2008 Rotating electrical machines - Part 30: Efficiency classes of single-speed, three-phase, cage-induction motors (IE-code)
    ISO 19859:2016 Gas turbine applications Requirements for power generation
    ISO 10438-2:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 2: Special-purpose oil systems
    BS EN ISO 10438-3:2003 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
    14/30244780 DC : 0 BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    BS EN ISO 14224:2016 Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment
    BS ISO 19859 : 2016 GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION
    ISO 10438-3:2007 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems
    BS EN ISO 10438-2:2003 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 2: SPECIAL-PURPOSE OIL SYSTEMS
    ISO 14224:2016 Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment
    NASA STD 5005 : 2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    NASA STD 5005(INT) : 2007 THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
    NASA KSC DE 512-SM : 2012 FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS
    ICC IECC CODE AND COMMENTARY : 2015 IECC® Code and Commentary
    NASA SSTD 8070 0081 : 2001 FACILITY ELECTRICAL STANDARD
    NASA KSC STD Z 0010 : 1983 DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR
    CSA N290.8 : 2015 TECHNICAL SPECIFICATION REQUIREMENTS FOR NUCLEAR POWER PLANT COMPONENTS
    ASTM F 2363/F2363M : 2017 : REDLINE Standard Specification for Sewage and Graywater Flow Through Treatment Systems
    I.S. EN ISO 14224:2016 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016)
    NEMA ICS 10.1 : 2005 INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT
    I.S. EN ISO 10438-2:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 2: SPECIAL-PURPOSE OIL SYSTEMS
    NEMA ICS 10.2 : 2005 INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT
    I.S. EN ISO 10438-3:2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
    NFPA 79 HDBK : 2015 Electrical Standard for Industrial Machinery Handbook
    EN 60034-30-1 : 2014 ROTATING ELECTRICAL MACHINES - PART 30-1: EFFICIENCY CLASSES OF LINE OPERATED AC MOTORS (IE CODE) (IEC 60034-30-1:2014)
    EN 60034-30 : 2009 ROTATING ELECTRICAL MACHINES - PART 30: EFFICIENCY CLASSES OF SINGLE-SPEED, THREE-PHASE, CAGE-INDUCTION MOTORS (IE-CODE)
    EN ISO 10438-2 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 2: SPECIAL-PURPOSE OIL SYSTEMS (ISO 10438-2:2007)
    EN ISO 10438-3 : 2007 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective