NEN EN 14190 : 2014

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
   4.1 Mechanical characteristics
        4.1.1 Flexural strength (expressed as flexural breaking
               load)
        4.1.2 Stability of ceiling elements
        4.1.3 Shear strength (strength of board/substructure
               connection)
        4.1.4 Impact resistance
   4.2 Fire behaviour
        4.2.1 Reaction to fire
        4.2.2 Resistance to fire
   4.3 Water vapour permeability (expressed as water vapour
        resistance factor)
   4.4 Acoustic properties
        4.4.1 Direct airborne sound insulation
        4.4.2 Acoustic absorption
        4.4.3 Impact sound insulation
   4.5 Thermal resistance (expressed as thermal conductivity)
   4.6 Regulated substances
   4.7 Dimensions and tolerances
   4.8 Thermal emissivity
   4.9 X-ray protection
5 Test methods
   5.1 Sampling
   5.2 Stability determination
        5.2.1 Principle
        5.2.2 Apparatus
        5.2.3 Procedure
        5.2.4 Expression of results
   5.3 Determination of thermal emissivity
        5.3.1 Principle
        5.3.2 Apparatus
        5.3.3 Procedure
        5.3.4 Expression of results
6 Evaluation of conformity
   6.1 General
   6.2 Type testing
        6.2.1 General
        6.2.2 Initial type testing
        6.2.3 Further type testing
   6.3 Factory production control (FPC)
        6.3.1 General
        6.3.2 Personnel
        6.3.3 Equipment
        6.3.4 Raw materials and components
        6.3.5 Product testing and evaluation
        6.3.6 Traceability and marking
        6.3.7 Non-conforming products
        6.3.8 Corrective action
        6.3.9 Other test methods
7 Designation of gypsum plasterboard products from reprocessing
8 Marking, labelling and packaging
Annex A (informative) Sampling procedure for testing
   A.1 General
   A.2 Sampling procedure
        A.2.1 General
        A.2.2 Random sampling
        A.2.3 Representative sampling
Annex B (informative) Reprocessing operations
Annex C (normative) Mounting and fixing in the test according
        to EN 13823 (SBI test) and related information
   C.1 General
   C.2 Products which have only been changed by mechanical
        processes to alter their shape or dimensions e.g.
        those subject to operations described in Annex B
        (a, b, k, l)
   C.3 Products which are formed by adhesion of another
        material (or plasterboard) to the surface of the
        plasterboard as in Annex B (d, g)
   C.4 Mounting and fixing for products which are formed by
        operations other than those listed in C.2 and C.3
        above
Annex ZA (informative) Clauses of this European Standard
         addressing the provisions of the EU Construction
         Products Directive
   ZA.1 Scope and relevant characteristics
   ZA.2 Attestation and declaration of conformity of gypsum
         plasterboard products from reprocessing
   ZA.3 CE marking and labelling
Bibliography