• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF EN 14276-1 : 2006 + A1 2011

Withdrawn
Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

View Superseded by
withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS
Withdrawn date

29-09-2021

Published date

12-01-2013

Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
  3.1 Définitions
  3.2 Symboles, grandeurs et unités
4 Matériaux
  4.1 Généralités
  4.2 Exigences relatives aux matériaux à
       utiliser pour les parties sous pression
  4.3 Exigences relatives aux matériaux
  4.4 Exigences relatives à la prévention de rupture
       fragile
  4.5 Documentation relative aux matériaux
  4.6 Matériaux destinés aux parties non soumises à
       la pression
5 Classification des récipients sous pression
  5.1 Catégorie de récipient
  5.2 Classification des fluides
6 Conception
  6.1 Généralités
  6.2 Corrosion et protection contre la corrosion
  6.3 Fissuration due à la corrosion sous contrainte
  6.4 Chargement
  6.5 Pression maximale admissible PS
  6.6 Pression de conception Pd
  6.7 Pression de calcul Pou Pc
  6.8 Température de conception td
  6.9 Température minimale du matériau
  6.10 Température de calcul tc
  6.11 Coefficient de joint
  6.12 Contrainte de calcul
  6.13 Ouvertures d'accès et de visite, dispositions de
       ventilation et de purge, dispositions de remplissage
       et de vidange, dispositifs de manutention
  6.14 Méthodes de conception
7 Fabrication
  7.1 Généralités
  7.2 Traçabilité du matériau
  7.3 Tolérances de fabrication
  7.4 Assemblage permanents
  7.5 Formage des parties sous pression
  7.6 Traitement thermique après soudage
  7.7 Propreté interne
  7.8 Réparations/retouches
  7.9 Opérations de finition
8 Essais et controle
  8.1 Réalisation des controles et essais
  8.2 Documentation de conception, revue et approbation
  8.3 Homologation de type
  8.4 Étalonnage
  8.5 Matériaux
  8.6 Fabrication
  8.7 Essai non destructif
  8.8 Éléments sous-traités
  8.9 Vérification finale
  8.10 Marquage
  8.11 Documentation
Annexe A (normative) Exigences alternatives pour la
          prévention de rupture fragile: Méthode selon
          les cas de contraintes thermiques
Annexe B (informative) Spécification et approbation
          des modes opératoires de brasage, des brasseurs
          et opérateurs de machine à braser
Annexe C (normative) Épreuve sous pression
Annexe D (informative) Relations entre les différentes
          pressions
Annexe E (normative) Méthodes expérimentales
Annexe F (normative) Caractéristiques des matériaux
          pour la conception
Annexe G (informative) Classification des composants au
          sens de la Directive concernant les équipements
          sous pression (DESP)
Annexe H (informative) Sélection du module de conformité
Annexe l (normative) Système de groupement des matériaux
Annexe J (informative) Système DN
Annexe K (normative) Spécification et approbation des
          modes opératoires et opérateurs d'expansion
Annexe ZA (informative) Relation entre la présente Norme
          européenne et les exigences essentielles de la
          Directive UE 97/23/CE
Bibliographie

Describes the requirements for material, design, manufacturing, testing and documentation for stationary pressure vessels intended for use in refrigerating systems and heat pumps.

DevelopmentNote
Indice de classement: E35-414-1PR. PR NF EN 14276-1 February 2002. (01/2002) 2006 Edition Re-issued in April 2011 & incorporates AMD 1 2011. (04/2011) PR NF EN 14276-1 March 2017. (03/2017)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Withdrawn
SupersededBy

EN ISO 5817:2014 Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014)
EN 1045:1997 Brazing - Fluxes for brazing - Classification and technical delivery conditions
EN 13445-5 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 5: INSPECTION AND TESTING
EN 13445-6 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON
EN 378-4:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 4: Operation, maintenance, repair and recovery
EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
EN ISO 17672:2016 Brazing - Filler metals (ISO 17672:2016)
EN ISO 15612:2004 Specification and qualification of welding procedures for metallic materials - Qualification by adoption of a standard welding procedure (ISO 15612:2004)
EN 378-1:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria
EN 10164:2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
EN 12797:2000/A1:2003 BRAZING - DESTRUCTIVE TESTS OF BRAZED JOINTS
EN 10111:2008 Continuously hot rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions
EN 764-1:2015+A1:2016 Pressure equipment - Part 1: Vocabulary
EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
EN 764-5:2014 Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification
EN 910 : 1996 DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS - BEND TESTS
EN 13445-8 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 8: ADDITIONAL REQUIREMENTS FOR PRESSURE VESSELS OF ALUMINIUM AND ALUMINIUM ALLOYS
EN 1173:2008 Copper and copper alloys - Material condition designation
EN ISO 3677:2016 Filler metal for soldering and brazing - Designation (ISO 3677:2016)
EN ISO 15611:2003 Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
EN 13445-4 : 2014 COR 2017 UNFIRED PRESSURE VESSELS - PART 4: FABRICATION
EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
ISO 5187:1985 Welding and allied processes — Assemblies made with soft solders and brazing filler metals — Mechanical test methods
EN 10204:2004 Metallic products - Types of inspection documents
EN ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
EN 10130:2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
EN 764-2:2012 Pressure equipment - Part 2: Quantities, symbols and units
EN 12517-1:2006 Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
EN ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
EN 837-1:1996/AC:1998 PRESSURE GAUGES - BOURDON TUBE PRESSURE GAUGES - DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING
ISO 817:2014 Refrigerants Designation and safety classification
EN ISO 15614-8:2016 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints (ISO 15614-8:2016)
EN 1418:1997 Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
EN 10160:1999 Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
EN 12799:2000/A1:2003 BRAZING - NON-DESTRUCTIVE EXAMINATION OF BRAZED JOINTS
EN 378-2:2016 Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and documentation
EN 764-4:2014 Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic materials
EN ISO 15607:2003 Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
1997/23/EC : 1997 DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT
EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
EN ISO 7438:2016 Metallic materials - Bend test (ISO 7438:2016)

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.