• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF EN 60432-1 : 2001 AMD 2 2013

Current
Current

The latest, up-to-date edition.

INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1: TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
Published date

12-01-2013

AVANT-PROPOS
1 Généralités
  1.1 Domaine d'application
  1.2 Références normatives
  1.3 Définitions
2 Prescriptions
  2.1 Généralités
  2.2 Marquage
  2.3 Protection contre les contacts accidentels dans
       les douilles à vis
  2.4 Echauffement du culot de lampe (delta ts)
  2.5 Résistance à la torsion
  2.6 Résistance d'isolement des lampes à culot B15d, B22d,
       E26/50x39 et d'autres lampes ayant un culot à jupe
       isolée
  2.7 Parties accidentellement sous tension
  2.8 Lignes de fuite des lampes à culot B15d et des lampes
       à culot B22d
  2.9 Sécurité en fin de durée de vie
  2.10 Interchangeabilité
  2.11 Renseignements pour la conception des luminaires
3 Evaluation
  3.1 Généralités
  3.2 Evaluation de la production globale au moyen des
       enregistrements du fabricant
  3.3 Evaluation des enregistrements du fabricant concernant
       les essais particuliers
  3.4 Conditions de rejet des lots
  3.5 Procédures d'échantillonnage pour le controle de la
       production globale
  3.6 Procédures d'échantillonnage pour le controle de lot
Annexe A (normative) Procédures d'essais diverses
Annexe B (normative) Symboles de marquage des emballages
Annexe C (normative) Procédures d'essai de résistance à la
                        torsion
Annexe D (normative) Essai de défaillance provoquée
Annexe E (normative) Essai de fonctionnement jusqu'à
                        défaillance
Annexe F (normative) Critères d'acceptation pour différents
                        effectifs d'échantillons et différents
                        NQA
Annexe G (normative) Critères d'acceptation - Résultats par
                        variables continues
Annexe H (normative) Essai de défaillance provoquée -
                        Groupage, échantillonnage et conformité
Annexe J (normative) Méthode de mesure de l'impédance du
                        secteur
Annexe K (informative) Renseignements pour la conception des
                        luminaires
Annexe ZA (normative) Références normatives à d'autres
                        publications internationales avec les
                        publications européennes correspondantes

Specifies the safety and interchangeability requirements of tungsten filament incandescent lamps for general lighting service. Specifies the method a manufacturer should use to show that his product conforms to this standard on the basis of whole production appraisal in association with his test records on finished products. Can also apply for certification purposes. Also gives details of a batch test procedure to make limited assessment of batches. Only concerns safety requirements and does not account for the performance of tungsten filament lamps with respect to luminous flux, life or power consumption characteristics.

DevelopmentNote
Indice de classement: C72-101-1. (09/2002) Supersedes NFC 72 101-1 (05/2005)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current
Supersedes

NF EN 61231 : 2010 AMD 1 2014 INTERNATIONAL LAMP CODING SYSTEM (ILCOS)
NF EN 60432-2 : 2001 AMD 2 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES

IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
NF EN 60061-1 : 1993 AMD 56 2017 LAMPS CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMPS CAPS
ISO 3951:1989 Sampling procedures and charts for inspection by variables for percent nonconforming
1989/336/EEC : 1989 COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY
NF EN 60432-2 : 2001 AMD 2 2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
1973/23/EEC : 1973 COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS
IEC 60410:1973 Sampling plans and procedures for inspection by attributes
IEC 60064:1993+AMD1:2000+AMD2:2002+AMD3:2005 CSV Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements
IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
NF EN 60598-1 : 2015 LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS
IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
NF EN 60064 : 1996 AMD 5 2010 TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES - PERFORMANCE REQUIREMENTS
IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
NF EN 60360 : 2000 STANDARD METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE
NF EN 60061-3 : 93 AMD 53 2017 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 3: GAUGES
IEC 60360:1998 Standard method of measurement of lamp cap temperature rise

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.