• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NF EN 61095 : 2009

Current
Current

The latest, up-to-date edition.

ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES
Published date

12-01-2013

AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Termes et définitions
  3.1 Termes généraux
  3.2 Appareils de connexion
  3.3 Parties d'appareils de connexion
  3.4 Manoeuvre des appareils de connexion
  3.5 Grandeurs caractéristiques
4 Classification
5 Caractéristiques des contacteurs
  5.1 Enumération des caractéristiques
  5.2 Type du contacteur
  5.3 Valeurs assignées et valeurs limites des circuits
      principaux
  5.4 Catégorie d'emploi
  5.5 Circuits de commande
  5.6 Circuits auxiliaires
  5.7 Coordination avec les dispositifs de protection
      contre les courts-circuits
6 Informations sur le matériel
  6.1 Nature des informations
  6.2 Marquage
  6.3 Instructions d'installation, de fonctionnement et
      d'entretien
7 Conditions normales de service, de montage et de
  transport
  7.1 Conditions normales de service
  7.2 Conditions pendant le transport et le stockage
  7.3 Montage
8 Dispositions relatives à la construction et au
  fonctionnement
  8.1 Dispositions constructives
  8.2 Dispositions relatives au fonctionnement
  8.3 Compatibilité électromagnétique
9 Essais
  9.1 Nature des essais
  9.2 Conformité aux dispositions constructives
  9.3 Conformité aux dispositions relatives au
      fonctionnement
Annexe A (normative) Marquage des bornes et numéro
         distinctif
Annexe B (normative) Séquences d'essais et nombre
         d'échantillons
Annexe C (normative) Description d'une méthode pour le
         réglage du circuit de charge
Annexe D (normative) Détermination du facteur de
         puissance d'un court-circuit
Annexe E (normative) Mesure des lignes de fuite et des
         distances d'isolement
Annexe F (normative) Correspondance entre la tension
         nominale du réseau d'alimentation et la tension
         assignée de tenue aux chocs d'un contacteur
Annexe G (normative) Essai d'inflammation au fil chauffant
Annexe H (normative) Degrés de protection d'un contacteur
         sous enveloppe
Annexe I (normative) Exigences et essais pour le matériel
         avec séparation de protection
Annexe ZA (normative) Références normatives à d'autres
          publications internationales avec les publications
          européennes correspondantes

Covers electromechanical air break contactors for household and similar use, with main contacts for connection to circuits, their rated voltage being not more than 440 V a.c. with rated operational currents equal to or less than 63 A for utilisation category AC-7a and 32 A for utilization category AC-7b, and rated conditional short-circuit current equal to or less than 6 kA.

DevelopmentNote
Indice de classement: C61-480. Supersedes NFC 61-810. (10/2001) Supersedes NFC 61 480. (05/2005) PR NF EN 61095 October 2007. (10/2007)
DocumentType
Standard
PublisherName
Association Francaise de Normalisation
Status
Current
Supersedes

Standards Relationship
I.S. EN 61095:2009 Identical
DIN EN 61095 : 2009 Identical
EN 61095:2009 Identical
SN EN 61095 : 1993 AMD 1 2000 Identical
IEC 61095:2009 Identical
NBN EN 61095 : 2009 Identical
UNE-EN 61095:2010 Identical
BS EN 61095:1993 Identical

IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
NFC 01 604 : 87 AMD 2 2016 ELECTROTECHNICAL VOCABULARY - CHAPTER 604: GENERATION, TRANSMISSION AND DISTRIBUTION OF ELECTRICITY - OPERATION
IEC 60028:1925 International standard of resistance for copper
2006/95/EC : 2006 DIRECTIVE 2006/1995/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 12 DECEMBER 2006 ON THE HARMONISATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS (CODIFIED VERSION) (TEXT WITH EEA RELEVANCE)
IEC 60947-4-1:2009+AMD1:2012 CSV Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
IEC 60073:2002 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators
IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
NF EN 60664-1 : 2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
NF EN 60947-1 : 2007 AMD 2 2015 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES
IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
NF EN 60085 : 2008 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
NF EN 60099-1 : 94 AMD 1 2000 SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS
NFC 01 826 : 2004 ELECTROTECHNICAL VOCABULARY - CHAPTER 826 - ELECTRICAL INSTALLATIONS OF BUILDINGS
IEC 60947-5-1 : 4.0 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
NF EN 60695-11-10 : 2013 FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS
NF EN 61140 : 2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT
IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
NF EN ISO 2039-2 : 1999 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS
NF EN 60529 : 92 AMD 2 2014 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)
NF EN 60947-5-1 : 2004 AMD 1 2009 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES
NF EN 60112 : 2003 AMD 1 2010 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
ISO 2039-2:1987 Plastics Determination of hardness Part 2: Rockwell hardness
IEC 60085:2007 Electrical insulation - Thermal evaluation and designation
FD ISO 7000 : 2004 FD SYMBOLES GRAPHIQUES UTILISABLES SUR LE MATERIEL - INDEX ET TABLEAU SYNOPTIQUE
IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
IEC 60364-4-44:2007+AMD1:2015 CSV Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances
IEC 60099-1:1991+AMD1:1999 CSV Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems
IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV Low-voltage switchgear and controlgear - Part 1: General rules
IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
NF EN 60068-2-78 : 2013 ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE
NF EN 60073 : 2003 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATORS AND ACTUATORS
NF EN 60447 : 2004 BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - ACTUATING PRINCIPLES
IEC 60050-826:2004 International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations
ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
NF EN 60695-2-10 : 2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/OUT-WIRE BASED TEST METHOD - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE
IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
IEC 60445:2017 Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
NF EN 60947 4-1 : 2010 AMD 1 2012 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS

View more information
Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.