|
FD ISO/TR 10949 : 2003 FD
|
HYDRAULIC FLUID POWER - COMPONENT CLEANLINESS - GUIDELINES FOR ACHIEVING AND CONTROLLING CLEANLINESS OF COMPONENTS FROM MANUFACTURE UNTIL INSTALLATION
|
|
NF ISO 7425-2 : 2006
|
HYDRAULIC FLUID POWER - HOUSINGS FOR ELASTOMER-ENERGIZED, PLASTIC-FACED SEALS - DIMENSIONS AND TOLERANCES - PART 2: ROD SEAL HOUSINGS
|
|
NF EN ISO 1179-3 : 2008
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H)
|
|
NF ISO 8434-2 : 2008
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 2: 37 DEGREE FLARED CONNECTORS
|
|
NF ISO 2942 : 2004
|
HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF FABRICATION INTEGRITY AND DETERMINATION OF THE FIRST BUBBLE POINT
|
|
NF ISO 4401 : 2005
|
HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES
|
|
NFE 48 752 : 2017
|
HYDRAULIC FLUID POWER - FLUIDS - DETERMINATION OF FIRE RESISTANT FLUIDS OVERALL PARTICULATE CONTAMINATION BY THE GRAVIMETRIC METHOD
|
|
NF ISO 10770-3 : 2008
|
HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 3: TEST METHODS FOR PRESSURE CONTROL VALVES
|
|
NF ISO 21287 : 2005
|
PNEUMATIC FLUID POWER - CYLINDERS - COMPACT CYLINDERS, 1000 KPA (10 BAR) SERIES, BORES FROM 20 MM TO 100 MM
|
|
NF ISO 23181 : 2007
|
HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID
|
|
NF ISO 3939 : 2006
|
FLUID POWER SYSTEMS AND COMPONENTS - MULTIPLE LIP PACKING SETS - METHODS FOR MEASURING STACK HEIGHTS
|
|
NF ISO 6150 : 2005
|
|
|
NF ISO 21018-1 : 2008
|
HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 1: GENERAL PRINCIPLES
|
|
NF EN ISO 1179-4 : 2008
|
CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B)
|
|
NF ISO 12151-5 : 2008
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS
|
|
NFE 48 072 : 2005
|
HYDRAULIC FLUID POWER - FLANGE HEADS FOR FLANGES ACCORDING TO NF ISO 6164
|
|
NF ISO 10100 : 2002 AMD 1 2012
|
HYDRAULIC FLUID POWER - CYLINDERS - ACCEPTANCE TESTS
|
|
NF EN ISO 8434-1 : 2007
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS
|
|
NFE 49 006 : 2005
|
PNEUMATIC FLUID POWER - CYLINDERS WITH DETACHABLE MOUNTINGS, 1 000 KPA (10 BAR) SERIES, BORES FROM 32 MM TO 320 MM - DIMENSIONS OF ROD END WITH FIXED PLAIN EYE AND HEAD ANGLE MS3
|
|
NF ISO 7425-1 : 2006
|
HYDRAULIC FLUID POWER - HOUSINGS FOR ELASTOMER-ENERGIZED, PLASTIC-FACED SEALS - DIMENSIONS AND TOLERANCES - PART 1: PISTON SEAL HOUSING
|
|
NF ISO 6022 : 2006
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 25 MPA (250 BAR) SERIES
|
|
NFE 48 610-2 : 2004
|
HYDRAULIC FLUID POWER - COMPATIBILITY BETWEEN FLUIDS AND STANDARD ELASTOMERIC MATERIALS - PART 2: TEST METHODS
|
|
NF ISO 6194-2 : 2009
|
ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 2: VOCABULARY
|
|
NF ISO 4411 : 2008
|
HYDRAULIC FLUID POWER - VALVES - DETERMINATION OF PRESSURE DIFFERENTIAL/FLOW CHARACTERISTICS
|
|
NF ISO 12500-1 : 2007
|
FILTERS FOR COMPRESSED AIR - TEST METHODS - PART 1: OIL AEROSOLS
|
|
NF ISO 21018-3 : 2008
|
HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION OF THE FLUID - PART 3: USE OF THE FILTER BLOCKAGE TECHNIQUE
|
|
NF ISO 6099 : 2009
|
FLUID POWER SYSTEMS AND COMPONENTS - CYLINDERS - IDENTIFICATION CODE FOR MOUNTING DIMENSIONS AND MOUNTING TYPES
|
|
NF ISO 15218 : 2003
|
PNEUMATIC FLUID POWER - 3/2 SOLENOID VALVES - MOUNTING INTERFACE SURFACES
|
|
NF ISO 11500 : 2008
|
HYDRAULIC FLUID POWER - DETERMINATION OF THE PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT-EXTINCTION PRINCIPLE
|
|
NF ISO 4407 : 2002
|
HYDRAULIC FLUID POWER - FLUID CONTAMINATION - DETERMINATION OF PARTICULATE CONTAMINATION BY THE COUNTING METHOD USING AN OPTICAL MICROSCOPE
|
|
NF ISO 6547 : 2006
|
HYDRAULIC FLUID POWER - CYLINDERS - PISTON SEAL HOUSINGS INCORPORATING BEARING RINGS - DIMENSIONS AND TOLERANCES
|
|
NF ISO 6149-4 : 2006
|
CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 METRIC THREADS AND O-RING SEALING - PART 4: DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS FOR EXTERNAL AND INTERNAL HEX PORT PLUGS
|
|
NF ISO 8434-3 : 2006
|
METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL CONNECTORS
|
|
FD ISO/TR 17165-2 : 2008 FD
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 2: RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES
|
|
NF ISO 3724 : 2007
|
HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING PARTICULATE CONTAMINANT
|
|
NFE 48 401 : 2016
|
HYDRAULIC FLUID POWER - TWO-, THREE- AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH ISO 725 (UN AND UNF) THREADS
|
|
NF ISO 17165-1 : 2008
|
HYDRAULIC FLUID POWER - HOSE ASSEMBLIES - PART 1: DIMENSIONS AND REQUIREMENTS
|
|
NF ISO 4392-3 : 2005
|
HYDRAULIC FLUID POWER - DETERMINATION OF CHARACTERISTICS OF MOTORS - PART 3: AT CONSTANT FLOW AND AT CONSTANT TORQUE
|
|
NF ISO 4409 : 2007
|
HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE
|
|
NF ISO 12151-2 : 2007
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 2: HOSE FITTINGS WITH ISO 8434-1 AND ISO 8434-4 24 DEGREE CONE CONNECTOR ENDS WITH O-RINGS
|
|
NF ISO 6020-1 : 2007
|
HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) SERIES - PART 1: MEDIUM SERIES
|
|
NF ISO 8140 : 2009
|
PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD-END CLEVIS
|
|
NF ISO 16889 : 2008
|
HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE OF A FILTER ELEMENT
|
|
NF ISO 8139 : 2010
|
PNEUMATIC FLUID POWER - CYLINDERS, 1000 KPA (10 BAR) SERIES - MOUNTING DIMENSIONS OF ROD-END SPHERICAL EYES
|
|
NF EN ISO 6149-1 : 2007
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 1: PORTS WITH TRUNCATED HOUSING FOR O-RING SEAL
|
|
NF ISO 14743 : 2004
|
PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES
|
|
NF ISO 16860 : 2006
|
HYDRAULIC FLUID POWER - FILTERS - TEST METHOD FOR DIFFERENTIAL PRESSURE DEVICES
|
|
NF ISO 4392-2 : 2002
|
HYDRAULIC FLUID POWER - DETERMINATION OF CHARACTERISTICS OF MOTORS - PART 2: STARTABILITY
|
|
NF ISO 4392-1 : 2002
|
HYDRAULIC FLUID POWER - DETERMINATION OF CHARACTERISTICS OF MOTORS - PART 1: AT CONSTANT LOW SPEED AND CONSTANT PRESSURE
|
|
NF ISO 8426 : 2008
|
HYDRAULIC FLUID POWER - POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY
|
|
NF ISO 2941 : 2009
|
HYDRAULIC FLUID POWER - FILTER ELEMENTS - VERIFICATION OF COLLAPSE/BURST PRESSURE RATING
|
|
NF ISO 15086-3 : 2009
|
HYDRAULIC FLUID POWER - DETERMINATION OF FLUID-BORNE NOISE CHARACTERISTICS OF COMPONENTS AND SYSTEMS - PART 3: MEASUREMENT OF HYDRAULIC IMPEDANCE
|
|
NF ISO 12151-4 : 2008
|
CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS
|
|
NF ISO 6301-2 : 2006
|
PNEUMATIC FLUID POWER - COMPRESSED-AIR LUBRICATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN SUPPLIER'S LITERATURE
|
|
NF ISO 12238 : 2006
|
PNEUMATIC FLUID POWER - DIRECTIONAL CONTROL VALVES - MEASUREMENT OF SHIFTING TIME
|
|
NF ISO 17082 : 2004
|
PNEUMATIC FLUID POWER - VALVES - DATA TO BE INCLUDED IN SUPPLIER LITERATURE
|
|
NF ISO 16030 : 2005
|
PNEUMATIC FLUID POWER - CONNECTIONS - PORTS AND STUD ENDS
|
