• There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

NFPA 1900:2024

Current
Current

The latest, up-to-date edition.

Standard for Aircraft Rescue and Fireghting Vehicles, Automotive Fire Apparatus, Wildland Fire Apparatus, and Automotive Ambulances
Available format(s)

Hardcopy

Language(s)

English

Published date

27-10-2022

Chapter 1 Administration 1.1 Scope. 1.2 Purpose. 1.3 Application. Chapter 2 Referenced Publications 2.1 General. 2.2 NFPA Publications. 2.3 Other Publications. 2.4 References for Extracts in Mandatory Sections. Chapter 3 Definitions 3.1 General. 3.2 NFPA Official Definitions. 3.3 General Definitions. Chapter 4 Aircraft Rescue and Firefighting Vehicles (NFPA414) 4.1 Administration. 4.2 General. 4.3 Requirements for All Aircraft Rescue and Firefighting Vehicles — Responsibility of Contractors/Suppliers. 4.4 Weights and Dimensions. 4.5 Propulsion System. 4.6 Vehicle Electrical System. 4.7 Vehicle Drive. 4.8 Suspension. 4.9 Rims, Tires, and Wheels. 4.10 Towing Connections. 4.11 Brakes. 4.12 Steering. 4.13 Cab. 4.14 Body. 4.15 Firefighting Systems and Agents.4.16 Agent Pump(s) and Pump Drive. 4.17 Water Tank. 4.18 Foam System. 4.19 Premixed Foam Solutions. 4.20 Turret Nozzles. 4.21 Preconnected Handlines. 4.22 Turret, Ground Sweep, and Undertruck Nozzles. 4.23 Complementary Agent System. 4.24 Halogenated Agent. 4.25 Dry Chemical Turret. 4.26 Lighting and Electrical Equipment. 4.27 Application. Chapter 5 Aircraft Interior Access Vehicle (NFPA414) 5.1 General. 5.2 AIAV Vehicle Requirements. 5.3 AIAV Body. 5.4 AIAV Aircraft Access/Egress. 5.5 AIAV Docking Platform. 5.6 AIAV Performance Requirements. 5.7 AIAV Safety Requirements. 5.8 AIAV Acceptance Criteria. Chapter 6 ARFF Apparatus — Acceptance Criteria (NFPA414) 6.1 General. 6.2 Component Manufacturer's Certification. 6.3 Prototype Vehicle Tests. 6.4 Operational Tests. Chapter 7 Fire Apparatus — General Requirements (NFPA1901/1906) 7.1 Administration. 7.2 General.7.3 Requirements by Apparatus Type. 7.4 Responsibility of the Purchaser. 7.5 Responsibility of the Contractor. 7.6 Fire Apparatus Components. 7.7 Legal Requirements. 7.8 Third-Party Certification of Test Results. 7.9 Manufacturer Certification of Test Results. 7.10 Personnel Protection. 7.11 Controls and Instructions. 7.12 Onboard Data Management and Communications Equipment. 7.13 Component Protection. 7.14 Vehicle Stability. 7.15 Fire Apparatus Performance. 7.16 Highway Performance. 7.17 Serviceability. 7.18 General Pre-Delivery Tests. 7.19 Tests on Delivery. 7.20 Documentation. 7.21 Data Required of the Contractor. 7.22 Statement of Exceptions. 7.23 EV Engine Equipped Apparatus. Chapter 8 Fire Apparatus — Requirements by Type (NFPA1901/1906) 8.1 General. 8.2 Ground Ladders. 8.3 Suction Hose or Supply Hose. 8.4 Equipment. 8.5 Pumper Apparatus. (Reserved) 8.6 Initial Attack Apparatus. (Reserved) 8.7 Mobile Water Supply Apparatus. (Reserved)8.8 Aerial Apparatus. 8.9 Aerial Quint Apparatus. 8.10 Special Service Apparatus. (Reserved) 8.11 Mobile Foam Apparatus. (Reserved) 8.12 Wildland Apparatus. (Reserved) 8.13 Wildland Mobile Water Supply Apparatus. (Reserved) 8.14 Wildland Crew Carrier Apparatus. (Reserved) 8.15 Wheel Chocks. 8.16 Traffic Vests. 8.17 Traffic Cones. 8.18 Illuminated Traffic Warning Devices. 8.19 Traffic Warning Triangle Kit. 8.20 Tire Tools. Chapter 9 Fire Apparatus — Chassis and Vehicle Components (NFPA1901/1906) 9.1 Carrying Capacity. 9.2 Engine and Engine System Design. 9.3 Vehicle Components. 9.4 Tractor-Drawn Aerial Fire Apparatus. Chapter 10 Fire Apparatus — Low Voltage Electrical Systems and Warning Devices (NFPA1901/1906) 10.1 General. 10.2 Wiring. 10.3 Power Supply. 10.4 Low Voltage Batteries. 10.5 Temperature Exposure. 10.6 Electromagnetic Interference. 10.7 Optical Warning Systems. 10.8 Audible Warning Devices. 10.9 Work Lighting. 10.10 Hazard Light.10.11 Backup Devices. 10.12 Stop, Tail, and Directional Lights. 10.13 Low Voltage Electrical System Performance Tests. 10.14 Documentation. Chapter 11 Fire Apparatus — Driving and Crew Areas (NFPA1901/1906) 11.1 General. 11.2 Cab Tilt Systems. 11.3 Driving Compartment. 11.4 Tractor-Drawn Vehicles. Chapter 12 Fire Apparatus — Body, Compartments, and Equipment Mounting (NFPA1901/1906) 12.1 Compartmentation. 12.2 Equipment Containment. 12.3 Equipment Racks. 12.4 SCBA Storage. 12.5 Pump and Plumbing Access. 12.6 Stepping, Standing, and Walking Surfaces. 12.7 Access Handrails or Handholds. 12.8 Metal Finish. 12.9 Hose Storage. 12.10 Requirements for Mounting of Ground Ladders. 12.11 Receivers and Anchors for Rope and Removable Winches. 12.12 Slip-On Firefighting Module. Chapter 13 Fire Apparatus — Fire Pumps and Associated Equipment (NFPA1901) 13.1 Application. 13.2 Design and Performance Requirements. 13.3 Pumping Engine Requirements. 13.4 Power Train Capability. 13.5 Construction Requirements. 13.6 Pump Intake Connections.13.7 Pump Discharge Outlets. 13.8 Pump Drains. 13.9 Pump Operator's Panel. 13.10 Pump Controls. 13.11 Pump Engine Controls. 13.12 Instrumentation. 13.13 Required Testing. Chapter 14 Fire Apparatus — Auxiliary Pumps and Associated Equipment (NFPA1901) 14.1 Application. 14.2 Pump Performance. 14.3 Pump Rating Label. 14.4 Power Train Capability. 14.5 Construction Requirements. 14.6 Pump Intakes. 14.7 Pump Discharges. 14.8 Pump Operator's Panel. 14.9 Pump Controls. 14.10 Pump Drive Systems. 14.11 Engine Controls. 14.12 Gauges and Instruments. 14.13 Testing. Chapter 15 Fire Apparatus — Pumps for Wildland Firefighting and Associated Equipment (NFPA1906) 15.1 Application. 15.2 Design and Performance Requirements. 15.3 Pump Engine Requirements. 15.4 Power Train Capability. 15.5 Construction Requirements. 15.6 Pump Intake. 15.7 Pump Discharge Outlets.15.8 Pump Drains. 15.9 Pump Operator's Location. 15.10 Pump Controls. 15.11 Pump Engine Controls. 15.12 Instrumentation. 15.13 Required Testing. Chapter 16 Fire Apparatus — Ultra-High Pressure Fire Pumps and Associated Equipment (NFPA1901/1906) 16.1 Application. 16.2 Pump Performance. 16.3 Power Train Capability. 16.4 Construction Requirements. 16.5 Pump Intakes. 16.6 Pump Discharges. 16.7 Pump Operator’s Panel. 16.8 Pump Controls. 16.9 Pump Drive Systems. 16.10 Engine Controls. 16.11 Gauges and Instruments. 16.12 Required Testing. Chapter 17 Fire Apparatus — Water Tanks (NFPA1901/1906) 17.1 Application. 17.2 Tank Construction. 17.3 Tank-to-Pump Intake Line. 17.4 Filling and Venting. 17.5 Mobile Water Supply Apparatus. 17.6 Water Tank Capacity Certification. Chapter 18 Fire Apparatus — Foam Proportioning Systems (NFPA1901/1906) 18.1 Application. 18.2 Requirements by Type of Foam Proportioning System.18.3 Design and Performance Requirements of a Foam Proportioning System. 18.4 Controls for Foam Proportioning Systems. 18.5 Foam Proportioning System Pressure Gauges, Flowmeters, and Indicators. 18.6 Atmospheric Foam Concentrate Tank. 18.7 Foam Concentrate Pump. 18.8 Pressure Vessel Foam Concentrate or Foam Solution Tanks. 18.9 Labels and Instruction Plates. 18.10 Foam Proportioning System Accuracy. 18.11 Testing and Documentation. Chapter 19 Fire Apparatus — Compressed Air Foam Systems (CAFS) (NFPA1901/1906) 19.1 Application. 19.2 General Requirements. 19.3 Compressed Air System. 19.4 Air Mixing. 19.5 Compressed Air System Piping. 19.6 Air System Controls. 19.7 Foam System Pressure Gauges, Flowmeters, and Indicators. 19.8 Labels and Instruction Plates. 19.9 Manufacturer’s Predelivery Tests. Chapter 20 Fire Apparatus — Aerial Devices (NFPA1901) 20.1 General Requirements. 20.2 Aerial Ladder Requirements. 20.3 Rungs. 20.4 Ladder Handrails. 20.5 Secondary Operator Steps. 20.6 Fall Protection Anchors. 20.7 Obstructions Below the Ladder. 20.8 Access Provisions. 20.9 Breathing Air System.20.10 Aerial Device General Breathing Air System Requirements. 20.11 Aerial Ladder Operating Position. 20.12 Aerial Ladder Operating Mechanisms. 20.13 Aerial Ladder Water Delivery System. 20.14 Elevating Platform Requirements. 20.15 Elevating Platform Rated Capacity. 20.16 Elevating Platform Operating Positions. 20.17 Elevating Platform Operating Mechanisms. 20.18 Ladders on the Elevating Platform. 20.19 Elevating Platform Water Delivery System. 20.20 Water Tower Requirements. 20.21 Water Tower Rated Capacity. 20.22 Water Tower Operating Mechanisms. 20.23 Water Tower Water Delivery System. 20.24 Control Devices. 20.25 Safety. 20.26 Hydraulic System. 20.27 Structure. 20.28 Stabilization. 20.29 Quality Control. 20.30 Instruction Plates and Signs. 20.31 Certification Tests. 20.32 Manufacturer's Predelivery Test. Chapter 21 Fire Apparatus — Line Voltage Electrical Systems (NFPA1901) 21.1 Application. 21.2 General Requirements. 21.3 Grounding and Bonding. 21.4 Power Source General Requirements. 21.5 Power Source Type Specific Requirements.21.6 Portable Generator Installations. 21.7 Line Voltage Supplied from an External Source. 21.8 Power Supply Assembly. 21.9 Overcurrent Protection. 21.10 Wiring Methods. 21.11 Wiring System Components. 21.12 Cord Reels. 21.13 Scene Lighting Systems. 21.14 Power-Operated Light Mast. 21.15 Electrical System Testing. Chapter 22 Fire Apparatus — Command and Communications (NFPA1901) 22.1 General. 22.2 Location. 22.3 Climate Control. 22.4 Noise Levels. 22.5 Lighting Levels. 22.6 Command Working Surfaces and Countertop. 22.7 Seating in Command Center. 22.8 Cabinets and Equipment Storage. 22.9 Wall, Ceiling, and Floor Surfaces. 22.10 Communications and Electrical Consoles. 22.11 Computer Equipment and Installation. 22.12 Video Equipment and Installation. 22.13 Power Operated Masts. Chapter 23 Fire Apparatus — Air Systems (NFPA1901) 23.1 Application. 23.2 Provisions Applying to All Air Systems. 23.3 Breathing Air Compressor. 23.4 Purification System.23.5 Air Storage Systems. 23.6 Air Booster Systems. 23.7 Air Supply Regulation. 23.8 Air Control Panel. 23.9 SCBA or SCUBA Air Cylinder Fill Station. 23.10 Air Hose Reels. 23.11 Air Hose. 23.12 Low Pressure Utility Air Supply. 23.13 Remote Breathing Air Systems. 23.14 Breathing Air System Testing and Delivery. 23.15 Utility Air System Testing. Chapter 24 Fire Apparatus — Winches (NFPA1901/1906) 24.1 General. 24.2 Winch Wire or Synthetic Rope. 24.3 Clutch. 24.4 Electric Powered Winches. 24.5 Hydraulically Driven Winches. Chapter 25 Fire Apparatus — Trailers (NFPA1901) 25.1 General. 25.2 Classification of Trailers. 25.3 Carrying Capacity. 25.4 Information Labels and Instruction Plates. 25.5 Fluids and Pressures Specific to the Trailer Chassis. 25.6 Braking System. 25.7 Suspension and Wheels. 25.8 Trailer Hitch. 25.9 Wheel Chocks. 25.10 Low Voltage Electrical Systems and Warning Devices. 25.11 Reflective Markings.Chapter 26 Fire Apparatus — Vehicle Protection Systems (NFPA1906) 26.1 Brush Rails. 26.2 Grille Guard. 26.3 Skid Plates. 26.4 Chassis Component Protection. Chapter 27 Fire Apparatus — Wildland Fire Crew Carrier Apparatus (NFPA1906) 27.1 General. 27.2 Crew Compartment. 27.3 Crew Compartment Body Structural Integrity. 27.4 Crew Compartment Entry Doors. 27.5 Crew Compartment Body Means of Escape. 27.6 Crew Compartment Seats. 27.7 Crew Compartment Seat Head Height. Chapter 28 Automotive Ambulances — General Requirements (NFPA1917) 28.1 Administration. 28.2 General. 28.3 Responsibility of the Purchaser. 28.4 Responsibility of the Contractor. 28.5 Ambulance Components. 28.6 Legal Requirements. 28.7 Third-Party Certification of Test Results. 28.8 Manufacturer Certification of Test Results. 28.9 Personnel Protection. 28.10 Controls and Instructions. 28.11 Component Protection. 28.12 Ambulance Performance. 28.13 Road Performance. 28.14 Serviceability. 28.15 Tests on Delivery.28.16 Documentation. 28.17 Data Required of Contractor. 28.18 Statement of Exceptions. Chapter 29 Automotive Ambulances — Chassis (NFPA1917) 29.1 Carrying Capacity. 29.2 Weight Distribution. 29.3 Reserved. 29.4 Engine Speed Auxiliary Control Device. 29.5 Exhaust System. 29.6 Braking System. 29.7 Suspension. 29.8 Wheels and Tires. 29.9 Vehicle Stability. 29.10 Rear Bumpers. 29.11 Stepping Surface. 29.12 Cab Seal. 29.13 Front Seats. 29.14 Rear Visibility. 29.15 Cab Integrity. Chapter 30 Automotive Ambulances — Patient Compartment (NFPA1917) 30.1 Patient Compartment Configuration. 30.2 Mounting. 30.3 Structural Integrity — Roof Loading. 30.4 Body Sealing. 30.5 Wheel Housings. 30.6 Patient Compartment to Cab Partition. 30.7 Access Handrails or Handholds. 30.8 Patient Compartment Entry Doors. 30.9 Means of Egress.30.10 Exterior Stepping Surfaces and Interior Steps. 30.11 Exterior Storage. 30.12 Floor. 30.13 Floor Covering. 30.14 Insulation. 30.15 Interior Storage. 30.16 Interior Surfaces. 30.17 Equipment Mounting. 30.18 Waste and Sharps Disposal. 30.19 Fire Extinguishers. 30.20 Holder for Intravenous Fluid Containers. 30.21 Patient Compartment Seats. 30.22 Patient Cot Retention. 30.23 HVAC. 30.24 Interior Noise. 30.25 Reflective Striping. 30.26 Metal Finish. 30.27 Painting. 30.28 Medical Gas — Main Supply and Installation. 30.29 Suction Aspirator. Chapter 31 Automotive Ambulances — Low Voltage Electrical Systems and Warning Devices (NFPA1917) 31.1 General. 31.2 Wiring. 31.3 Power Supply. 31.4 Operational Electrical Load Test Conditions. 31.5 Load Management. 31.6 Batteries. 31.7 Temperature Exposure. 31.8 Electromagnetic Interference.31.9 Optical Warning Systems. 31.10 Audible Warning Devices. 31.11 Exterior and Interior Lighting. 31.12 Do-Not-Move Ambulance Light. 31.13 Backup Alarm. 31.14 Stop, Tail, and Directional Lights. 31.15 Communications Equipment. Chapter 32 Automotive Ambulances — Line Voltage Electrical Systems (NFPA1917) 32.1 General. 32.2 General Requirements. 32.3 Grounding and Bonding. 32.4 Ground-Fault Circuit Interrupters. 32.5 Wiring Methods. 32.6 Wiring System Components. 32.7 Cord Reels. 32.8 Transfer Switch Applications. 32.9 Scene Lighting Systems. 32.10 Appliance Accessibility and Fastening. Chapter 33 Automotive Ambulances — Line Voltage Power Source (NFPA1917) 33.1 General Requirements. 33.2 Requirements by Generator Size. 33.3 Power-Source-Type Specific Requirements. 33.4 Wiring for Portable Generator. Chapter 34 Automotive Ambulances — Remounted Ambulance Patient Compartments (NFPA1917) 34.1 Application. 34.2 Equivalency. 34.3 General. 34.4 Responsibility of the Purchaser. 34.5 Responsibility of the Contractor.34.6 Remounted Ambulance Components. Annex A Explanatory Material Annex B Aircraft Rescue and Firefighting Vehicle Questionnaire (NFPA414) Annex C Driver's Enhanced Vision System (NFPA414) Annex D Specifying and Procuring Fire Apparatus (NFPA1901) Annex E Weights and Dimensions for Common Equipment (NFPA1901) Annex F Guidelines for First-Line and Reserve Fire Apparatus (NFPA1901) Annex G History of NFPA1900 Annex H Additional Information for Assessing Suitability and Scope for Remounts (NFPA1917) Annex I Informational References

This standard defines the minimum requirements for the design, performance, acceptance criteria, and testing of aircraft rescue and firefighting apparatus, new automotive fire apparatus and trailers, wildland fire apparatus, and automotive and remounted ambulances.

DocumentType
Standard
ISBN
978-145593028-9
Pages
380
PublisherName
National Fire Protection Association
Status
Current

SAE J2418:2015(S2020) Occupant Restraint Dynamic System Evaluation - Frontal Impact Heavy Trucks(STABILIZED Nov 2020)
ISO/IEC 17065:2012 Conformity assessment — Requirements for bodies certifying products, processes and services
SAE J 2180 : 2011 A TILT-TABLE PROCEDURE FOR MEASURING THE STATIC ROLLOVER THRESHOLD FOR HEAVY TRUCKS
SAE J 1888 : 1990 HIGH CURRENT TIME LAG ELECTRIC FUSES
ASTM E 6 : 2009 Standard Terminology Relating to Methods of Mechanical Testing
IEC 62477-1:2022 Safety requirements for power electronic converter systems and equipment - Part 1: General
SAE J1127 : 2020 Low Voltage Battery Cable
ASTM E 384 : 2010 Standard Test Method for Microindentation Hardness of Materials
NFPA 10:2022 Standard for Portable Fire Extinguishers
SAE J 156 : 2016 FUSIBLE LINKS
SAE J845:2021 Optical Warning Devices for Authorized Emergency, Maintenance, and Service Vehicles
SAE J 553:2022 Circuit Breakers
ANSI S1.4 : 1983 SPECIFICATION FOR SOUND LEVEL METERS
SAE J575:2021 Test Methods and Equipment for Lighting Devices for Use on Vehicles Less than 2032 mm in Overall Width
SAE J 3057 : 2017 AMBULANCE MODULAR BODY EVALUATION-QUASI-STATIC LOADING FOR TYPE 1 AND TYPE 3 MODULAR AMBULANCE BODIES
SAE J 3043 : 2014 AMBULANCE EQUIPMENT MOUNT DEVICE OR SYSTEMS
SAE J 551/1 : 2015 PERFORMANCE LEVELS AND METHODS OF MEASUREMENT OF ELECTROMAGNETIC COMPATIBILITY OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (16.6 HZ TO 18 GHZ)
SAE J1128:2020 Low Voltage Primary Cable
AWS D1.2/D1.2M : 2014 STRUCTURAL WELDING CODE - ALUMINUM
SAE J 2077 : 1990 MINIATURE BLADE TYPE ELECTRICAL FUSES
ASTM E 709 : 2021 Standard Guide for Magnetic Particle Testing
ASTM E 569/E569M : 2020 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
ISO 17840-4:2018 Road vehicles — Information for first and second responders — Part 4: Propulsion energy identification
SAE J 1673 : 2012 HIGH VOLTAGE AUTOMOTIVE WIRING ASSEMBLY DESIGN
IPC-A-610H:2020 Acceptability of Electronic Assemblies
ASME B40.100 : 2013 Pressure Gauges and Gauge Attachments (B40.100 - 2013)
ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
CSA W47.2 : 2011 CERTIFICATION OF COMPANIES FOR FUSION WELDING OF ALUMINUM
SAE J578:2020 Chromaticity Requirements for Ground Vehicle Lamps and Lighting Equipment
SAE J 560 : 2020 Primary and Auxiliary Seven Conductor Electrical Connector for Truck-Trailer Jumper Cable
AWS D1.3/D1.3M : 2018 STRUCTURAL WELDING CODE-SHEET STEEL
SAE J 3058 : 2016 AMBULANCE INTERIOR STORAGE COMPARTMENT INTEGRITY
SAE J1849:2020 Emergency Vehicle Sirens
SAE J2394 : 2020 Seven Conductor Cable for ABS Power - Truck and Bus
ISO 9244:2008 Earth-moving machinery Machine safety labels General principles
SAE J 2863 : 2016 AUTOMOTIVE TRAILER TOW CONNECTOR
SAE J 1908 : 2013 ELECTRICAL GROUNDING PRACTICE
NFPA 460:2024 Standard for Aircraft Rescue and Fireƒghting Services at Airports
ASTM E 797 : 2005 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method
ASTM E 1004 : 2017 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method
SAE J2174 : 2020 Heavy-Duty Wiring Systems for Trailers 2032 mm or More in Width
ISO/IEC 17020:2012 Conformity assessment — Requirements for the operation of various types of bodies performing inspection
NFPA 1932:2020 Standard on Use, Maintenance, and Service Testing of In-Service Fire Department Ground Ladders
ASTM E 18 : 2011 Standard Test Methods for Rockwell Hardness of Metallic Materials
SAE J 2420 : 2010 COE FRONTAL STRENGTH EVALUATION - DYNAMIC LOADING HEAVY TRUCKS
ASTM E 114 : 2020 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
ANSI Z535.4:2011(R2017) American National Standard for Product Safety Signs and Labels
SAE J 3027 : 2016 AMBULANCE LITTER INTEGRITY, RETENTION, AND PATIENT RESTRAINT
NFPA 70:2023 National Electrical Code (NEC) Softbound
NFPA 440:2024 Guide for Aircraft Rescue and Fireƒghting Operations and Airport/ Community Emergency Planning
SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
ASTM E 650 : 1997 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors
SAE J 554 : 1987 ELECTRIC FUSES (CARTRIDGE TYPE)
NFPA 1150:2022 Standard on Foam Chemicals for Fires in Class A Fuels
SAE J1889 : 2019 LED Signal and Marking Lighting Devices
SAE J2202 : 2019 Heavy-Duty Wiring Systems for On-Highway Trucks
SAE J 2929 : 2013 SAFETY STANDARD FOR ELECTRIC AND HYBRID VEHICLE PROPULSION BATTERY SYSTEMS UTILIZING LITHIUM-BASED RECHARGEABLE CELLS
SAE AIR 1375 : 2014 MINIMUM SAFETY REQUIREMENTS FOR SPECIAL PURPOSE AIRLINE GROUND SUPPORT EQUIPMENT
NFPA 1989 : 2019 Standard on Breathing Air Quality for Emergency Services Respiratory Protection
CSA W47.1 : 2009 CERTIFICATION OF COMPANIES FOR FUSION WELDING OF STEEL
NFPA 1961 : 2020 Standard on Fire Hose
UL 2231-2:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems
NFPA 1981 : 2019 Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services
UL 2231-1:2ED 2012-09 Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits; Part 1: General Requirements
AWS D1.1/D1.1M : 2015 STRUCTURAL WELDING CODE-STEEL
NFPA 950 : 2020 Standard for Data Development and Exchange for the Fire Service
NFPA 1931:2020 Standard for Manufacturer’s Design of Fire Department Ground Ladders
SAE J 3102 : 2017 AMBULANCE PATIENT COMPARTMENT STRUCTURAL INTEGRITY TEST TO SUPPORT SAE J3027 COMPLIANT LITTER SYSTEMS
ASTM E 661 : 2022 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
SAE J 683 : 2011 TIRE CHAIN CLEARANCE - TRUCKS, BUSES (EXCEPT SUBURBAN, INTERCITY, AND TRANSIT BUSES), AND COMBINATIONS OF VEHICLES
SAE J 2181 : 2011 STEADY-STATE CIRCULAR TEST PROCEDURE FOR TRUCKS AND BUSES
NFPA 1964 : 2018 SPRAY NOZZLES
NFPA 1963 : 2019 Standard for Fire Hose Connections
CGA G 7.1 : 2018 COMMODITY SPECIFICATION FOR AIR
AWS B1.10M/B1.10:2016 GUIDE FOR THE NONDESTRUCTIVE EXAMINATION OF WELDS
SAE J 2344 : 2010 GUIDELINES FOR ELECTRIC VEHICLE SAFETY
NFPA 1910:2024 Standard for the Inspection, Maintenance, Refurbishment, Testing, and Retirement of In-Service Emergency Vehicles and Marine Firefighting Vessels
ASTM E 165/E165M : 2018 Standard Practice for Liquid Penetrant Testing for General Industry
SAE J 3026 : 2016 AMBULANCE PATIENT COMPARTMENT SEATING INTEGRITY AND OCCUPANT RESTRAINT
SAE J 994 : 2014 ALARM - BACKUP - ELECTRIC LABORATORY PERFORMANCE TESTING
NFPA 2500:2022 Standards for Operations and Training for Technical Search and Rescue Incidents and Life Safety Rope and Equipment for Emergency Services
SAE AIR 6133 : 2013(R 2018) DESIGN AND SAFETY CRITERIA FOR PASSENGER BOARDING STAIRWAYS
SAE J 2910 : 2014 Recommended Practice for the Design and Test of Hybrid Electric and Electric Trucks and Buses for Electrical Safety<br>

View more information
£129.40
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.